1
00:00:00,090 --> 00:00:02,310
If we start on the bottom of the OSI model,

2
00:00:02,310 --> 00:00:05,460
we'll find our first layer, the physical layer.

3
00:00:05,460 --> 00:00:08,370
Now, this is where bits are transmitted across the network

4
00:00:08,370 --> 00:00:09,750
and includes all the physical

5
00:00:09,750 --> 00:00:12,270
and electrical characteristics of this network.

6
00:00:12,270 --> 00:00:13,290
So, this is going to tell us

7
00:00:13,290 --> 00:00:15,210
whether we're using an ethernet network,

8
00:00:15,210 --> 00:00:17,610
whether we're using fiber or copper cables,

9
00:00:17,610 --> 00:00:19,980
whether we're using Cat 5 or Cat 6,

10
00:00:19,980 --> 00:00:23,670
and even if we're using radio frequency in the case of Wi-Fi.

11
00:00:23,670 --> 00:00:25,380
Regardless of which method we're using

12
00:00:25,380 --> 00:00:27,630
to send our data across this first layer,

13
00:00:27,630 --> 00:00:29,610
it's always going to occur as bits,

14
00:00:29,610 --> 00:00:31,080
and these are binary bits.

15
00:00:31,080 --> 00:00:34,170
These are going to be a series of ones and zeros.

16
00:00:34,170 --> 00:00:36,120
Now, each media has a different way

17
00:00:36,120 --> 00:00:39,300
of representing these bits, these series of ones and zeros,

18
00:00:39,300 --> 00:00:41,160
because these series of ones and zeros

19
00:00:41,160 --> 00:00:43,980
are the basic building blocks of all of our data.

20
00:00:43,980 --> 00:00:46,050
For example, if I'm using a copper wire,

21
00:00:46,050 --> 00:00:48,660
such as in a Cat 5 or a Cat 6 network,

22
00:00:48,660 --> 00:00:51,030
you may see that there's zero voltage on the wire

23
00:00:51,030 --> 00:00:52,410
when you have a zero bit.

24
00:00:52,410 --> 00:00:54,180
And then if you want to represent a one,

25
00:00:54,180 --> 00:00:56,700
you might use plus five or negative five volts

26
00:00:56,700 --> 00:00:58,350
on that copper wire.

27
00:00:58,350 --> 00:01:00,390
Now, when we switch between these two modes,

28
00:01:00,390 --> 00:01:02,340
this tells us whether we should read a one

29
00:01:02,340 --> 00:01:03,840
or a zero on the network.

30
00:01:03,840 --> 00:01:06,390
And this is called Transition Modulation.

31
00:01:06,390 --> 00:01:08,370
Now, for the exam, you don't need to understand

32
00:01:08,370 --> 00:01:10,980
the specifics of transition modulation,

33
00:01:10,980 --> 00:01:13,410
but you should understand this basic concept.

34
00:01:13,410 --> 00:01:16,770
On this wire, we're going to have one level that represents one

35
00:01:16,770 --> 00:01:19,380
and another level that represents zero.

36
00:01:19,380 --> 00:01:20,970
Let me give you another example.

37
00:01:20,970 --> 00:01:24,000
This time, let's pretend we're using a fiber optic cable.

38
00:01:24,000 --> 00:01:25,320
Now, with fiber optic cables,

39
00:01:25,320 --> 00:01:27,780
we're going to use light instead of voltages.

40
00:01:27,780 --> 00:01:29,640
Now, it's similar to the way we did voltages,

41
00:01:29,640 --> 00:01:31,680
but instead when we want to represent a one,

42
00:01:31,680 --> 00:01:33,150
we turn the light on.

43
00:01:33,150 --> 00:01:35,970
If we want to represent a zero, we turn the light off.

44
00:01:35,970 --> 00:01:37,560
Now, we can just read the state of the light.

45
00:01:37,560 --> 00:01:39,240
Is it on? That's a one.

46
00:01:39,240 --> 00:01:40,950
Is it off? That's a zero.

47
00:01:40,950 --> 00:01:42,600
And when there's a transition between,

48
00:01:42,600 --> 00:01:44,790
that tells us between these two modes,

49
00:01:44,790 --> 00:01:47,640
whether we should be reading this as a one or a zero.

50
00:01:47,640 --> 00:01:49,260
Now, as we start understanding that

51
00:01:49,260 --> 00:01:51,270
we then have to look at the cables themselves,

52
00:01:51,270 --> 00:01:53,670
because this is also part of our physical layer.

53
00:01:53,670 --> 00:01:56,850
If we're using something like a Cat 5 or a Cat 6 cable,

54
00:01:56,850 --> 00:02:00,660
we may have a certain connector on the end called an RJ45,

55
00:02:00,660 --> 00:02:02,190
which allows us to plug that cable

56
00:02:02,190 --> 00:02:04,860
into the back of a computer or into a switch.

57
00:02:04,860 --> 00:02:07,050
Now, the way that connector is wired

58
00:02:07,050 --> 00:02:08,940
is based on a certain standard.

59
00:02:08,940 --> 00:02:11,340
We use two standards inside our network,

60
00:02:11,340 --> 00:02:16,080
TIA/EIA-568A and TIA/EIA-568B.

61
00:02:17,190 --> 00:02:18,480
Now, we'll talk about these

62
00:02:18,480 --> 00:02:20,700
and which way these pins actually are set up

63
00:02:20,700 --> 00:02:23,370
inside this connector in a future lesson.

64
00:02:23,370 --> 00:02:24,540
This is going to be important,

65
00:02:24,540 --> 00:02:26,580
because as we start talking about these,

66
00:02:26,580 --> 00:02:27,840
this is going to tell us whether or not

67
00:02:27,840 --> 00:02:31,140
we're using crossover cables or straight-through cables.

68
00:02:31,140 --> 00:02:32,640
If we use a crossover cable,

69
00:02:32,640 --> 00:02:34,500
we're actually going to flip the transmission

70
00:02:34,500 --> 00:02:36,660
and receive bits on the end of the cable.

71
00:02:36,660 --> 00:02:38,730
So, one end will be the A standard

72
00:02:38,730 --> 00:02:40,590
and one end will be the B standard.

73
00:02:40,590 --> 00:02:41,423
But if we're using

74
00:02:41,423 --> 00:02:43,470
a straight-through cable or a patch cable,

75
00:02:43,470 --> 00:02:46,470
we're going to have the B standard on both sides.

76
00:02:46,470 --> 00:02:48,060
Now again, it's important to understand

77
00:02:48,060 --> 00:02:49,260
these wiring standards,

78
00:02:49,260 --> 00:02:51,870
so we're going to spend some time on them in a future lesson,

79
00:02:51,870 --> 00:02:54,090
because on the exam you may be asked

80
00:02:54,090 --> 00:02:56,400
to wire up an ethernet jack.

81
00:02:56,400 --> 00:02:58,860
Maybe they're going to tell you to make a crossover cable,

82
00:02:58,860 --> 00:03:01,680
And you have to drag the right colors to the right pins,

83
00:03:01,680 --> 00:03:02,790
that kind of a thing.

84
00:03:02,790 --> 00:03:04,110
And so, to make sure you're ready for that,

85
00:03:04,110 --> 00:03:06,630
we're going to cover that in a separate lesson.

86
00:03:06,630 --> 00:03:09,390
Now, at this point, we've talked about having our cables,

87
00:03:09,390 --> 00:03:12,060
we've talked about how we represent bits on those cables,

88
00:03:12,060 --> 00:03:13,470
and we talked about how we're going to set up

89
00:03:13,470 --> 00:03:15,030
the connectors of those cables,

90
00:03:15,030 --> 00:03:16,440
but there's another thing we have to think about

91
00:03:16,440 --> 00:03:17,790
at the physical layer,

92
00:03:17,790 --> 00:03:19,980
and that's the topology of the network.

93
00:03:19,980 --> 00:03:21,720
How are we actually running these cables

94
00:03:21,720 --> 00:03:24,510
to physically connect the different devices together?

95
00:03:24,510 --> 00:03:27,150
Well, when we look at this from a layer 1 perspective,

96
00:03:27,150 --> 00:03:28,770
we can look at this based on the things

97
00:03:28,770 --> 00:03:30,960
we talked about in the last section of the course.

98
00:03:30,960 --> 00:03:32,850
Is it a bus? Is it a ring?

99
00:03:32,850 --> 00:03:35,190
Is it a star? Is it a hub and spoke?

100
00:03:35,190 --> 00:03:37,410
How about a full mesh, a partial mesh,

101
00:03:37,410 --> 00:03:39,508
or any other topology that we discussed?

102
00:03:39,508 --> 00:03:41,310
When it comes to figuring this out,

103
00:03:41,310 --> 00:03:43,620
you're going to look at how they're physically cabled,

104
00:03:43,620 --> 00:03:47,310
if you drew them out, does it make a line like a bus,

105
00:03:47,310 --> 00:03:50,070
a ring going in a circle, or a star pattern?

106
00:03:50,070 --> 00:03:52,680
And that'll tell you what physical topology you have.

107
00:03:52,680 --> 00:03:55,290
This again, is a layer 1 issue.

108
00:03:55,290 --> 00:03:57,270
Another issue that we have to concern ourself with

109
00:03:57,270 --> 00:04:00,270
at layer 1 is synchronizing our communications.

110
00:04:00,270 --> 00:04:03,510
We have to ask ourself, how does the receiving end know

111
00:04:03,510 --> 00:04:05,370
if it's ready to accept ones and zeros

112
00:04:05,370 --> 00:04:06,840
that we're going to send it?

113
00:04:06,840 --> 00:04:09,030
Now, this sounds like a really easy thing to do,

114
00:04:09,030 --> 00:04:10,080
if we're talking to each other,

115
00:04:10,080 --> 00:04:12,930
but with computers this can get much more complicated.

116
00:04:12,930 --> 00:04:14,730
So, to make sure that we understand this,

117
00:04:14,730 --> 00:04:16,529
we have two things that can happen.

118
00:04:16,529 --> 00:04:17,730
It can either be transmitted

119
00:04:17,730 --> 00:04:20,579
asynchronously or synchronously.

120
00:04:20,579 --> 00:04:23,100
Now, when I'm looking at asynchronous communication,

121
00:04:23,100 --> 00:04:25,650
you should be able to consider something like a voicemail.

122
00:04:25,650 --> 00:04:27,510
You call up your friend, they don't answer,

123
00:04:27,510 --> 00:04:30,240
and so you leave a message so they can listen to it later,

124
00:04:30,240 --> 00:04:33,360
the communication happens out of sync or out of time.

125
00:04:33,360 --> 00:04:34,890
You do it and then later on

126
00:04:34,890 --> 00:04:36,780
they can go back and listen to it.

127
00:04:36,780 --> 00:04:40,350
Now in networks, this happens via a start and stop bit,

128
00:04:40,350 --> 00:04:41,520
similarly to how your friend

129
00:04:41,520 --> 00:04:43,140
can press play on their voicemail system

130
00:04:43,140 --> 00:04:44,400
to listen to their message,

131
00:04:44,400 --> 00:04:46,230
a network can send a start bit

132
00:04:46,230 --> 00:04:48,300
when it wants to start beginning the transmission,

133
00:04:48,300 --> 00:04:50,467
and then a stop bit to tell the other side,

134
00:04:50,467 --> 00:04:52,200
"Hey, I'm done transmitting.

135
00:04:52,200 --> 00:04:54,420
You've gotten everything I'm going to send."

136
00:04:54,420 --> 00:04:55,890
Now, if we decide to go and do

137
00:04:55,890 --> 00:04:58,290
communications synchronously, on the other hand,

138
00:04:58,290 --> 00:05:01,140
we have to be in the same place at the same time.

139
00:05:01,140 --> 00:05:02,700
So, in our previous example,

140
00:05:02,700 --> 00:05:04,230
if your friend picked up the phone

141
00:05:04,230 --> 00:05:05,730
and you had a conversation,

142
00:05:05,730 --> 00:05:07,800
you could talk to them and they could talk to you.

143
00:05:07,800 --> 00:05:09,660
This is a synchronized conversation,

144
00:05:09,660 --> 00:05:12,480
because you're both talking at the same time.

145
00:05:12,480 --> 00:05:14,580
Now, this communication happens in real time.

146
00:05:14,580 --> 00:05:16,800
That's what's great about synchronization.

147
00:05:16,800 --> 00:05:18,330
Now, as far as when we start talking

148
00:05:18,330 --> 00:05:20,280
about this from a network perspective,

149
00:05:20,280 --> 00:05:23,610
instead of using a start and a stop bit for synchronizing,

150
00:05:23,610 --> 00:05:26,580
we would use some sort of common time source.

151
00:05:26,580 --> 00:05:28,770
And so, maybe we're all going to use a clock,

152
00:05:28,770 --> 00:05:33,090
and every time a second passes, we can transmit and receive,

153
00:05:33,090 --> 00:05:34,770
and that tells us that we're going to do it

154
00:05:34,770 --> 00:05:36,630
on the cadence of the beat.

155
00:05:36,630 --> 00:05:38,850
That would be something that is synchronous.

156
00:05:38,850 --> 00:05:40,140
Now, in addition to figuring out,

157
00:05:40,140 --> 00:05:42,390
if it's going to be asynchronous or synchronous,

158
00:05:42,390 --> 00:05:43,470
you also have to figure out

159
00:05:43,470 --> 00:05:46,290
how you're going to utilize the bandwidth of the cable.

160
00:05:46,290 --> 00:05:48,420
And there's two main ways that you can do this.

161
00:05:48,420 --> 00:05:51,390
One is called broadband and one is called baseband.

162
00:05:51,390 --> 00:05:53,550
Now, broadband is going to divide our bandwidth

163
00:05:53,550 --> 00:05:55,110
into separate channels.

164
00:05:55,110 --> 00:05:57,000
If you have a TV service at your house,

165
00:05:57,000 --> 00:05:58,410
you're probably familiar with this,

166
00:05:58,410 --> 00:06:00,750
because you have a single cable coming into your house,

167
00:06:00,750 --> 00:06:03,210
but it carries 200 or more channels.

168
00:06:03,210 --> 00:06:05,340
The user then is going to choose a single channel,

169
00:06:05,340 --> 00:06:07,350
and the rest are going to be filtered out.

170
00:06:07,350 --> 00:06:09,630
In opposition to this, we have baseband

171
00:06:09,630 --> 00:06:11,250
where you're going to use all of the frequency

172
00:06:11,250 --> 00:06:13,140
of the cable all of the time.

173
00:06:13,140 --> 00:06:16,620
So, a telephone for instance, uses baseband communication,

174
00:06:16,620 --> 00:06:18,360
which means that when you pick up the phone,

175
00:06:18,360 --> 00:06:21,630
you're using all the bandwidth allocated to that phone line.

176
00:06:21,630 --> 00:06:24,030
This doesn't hold true with the cable TV signal, right?

177
00:06:24,030 --> 00:06:25,380
Because we had 200 channels

178
00:06:25,380 --> 00:06:27,240
all using some of that bandwidth,

179
00:06:27,240 --> 00:06:29,246
but we only pulled out the ones we wanted.

180
00:06:29,246 --> 00:06:31,350
For this reason, we can only make

181
00:06:31,350 --> 00:06:33,180
one call at a time when using a phone,

182
00:06:33,180 --> 00:06:36,360
but we can have 200 channels or more on our TV.

183
00:06:36,360 --> 00:06:39,750
Now, when we use baseband, we're going to use a reference clock

184
00:06:39,750 --> 00:06:41,460
that allows us to send the information

185
00:06:41,460 --> 00:06:44,640
for both the sender and the receiver at this certain time.

186
00:06:44,640 --> 00:06:46,260
By using this reference clock,

187
00:06:46,260 --> 00:06:49,620
this is an example of using asynchronous communication.

188
00:06:49,620 --> 00:06:51,900
Another good example of a baseband network

189
00:06:51,900 --> 00:06:54,060
is a wired home ethernet network,

190
00:06:54,060 --> 00:06:56,460
because this is going to use all of the frequency

191
00:06:56,460 --> 00:06:58,320
that's available on your cable,

192
00:06:58,320 --> 00:07:00,330
giving you more bandwidth than you would,

193
00:07:00,330 --> 00:07:02,700
if you had a broadband area.

194
00:07:02,700 --> 00:07:05,250
Now, in this case, if we have a single baseband

195
00:07:05,250 --> 00:07:06,960
using up all of the bandwidth,

196
00:07:06,960 --> 00:07:09,270
we need to figure out how to get more out of it.

197
00:07:09,270 --> 00:07:10,110
And so to do this,

198
00:07:10,110 --> 00:07:12,510
we have a couple of different mechanisms we can do,

199
00:07:12,510 --> 00:07:13,470
and the first one of these

200
00:07:13,470 --> 00:07:16,050
is what's known as Time-Division Multiplexing.

201
00:07:16,050 --> 00:07:18,450
In this mode, each session is going to take turns

202
00:07:18,450 --> 00:07:20,910
using a dedicated time slot to get

203
00:07:20,910 --> 00:07:23,430
part of that bandwidth from the baseband.

204
00:07:23,430 --> 00:07:24,930
Now, an easy analogy to this

205
00:07:24,930 --> 00:07:27,240
is if you have a house with a single TV in it,

206
00:07:27,240 --> 00:07:29,190
but you have four family members.

207
00:07:29,190 --> 00:07:32,400
Everyone wants to watch TV, but there's only one TV,

208
00:07:32,400 --> 00:07:33,600
so they're going to have to take turns

209
00:07:33,600 --> 00:07:35,700
picking what program's going to be on.

210
00:07:35,700 --> 00:07:38,580
Now, in a pure time-division multiplexing environment,

211
00:07:38,580 --> 00:07:41,250
each person is going to be assigned a time slot

212
00:07:41,250 --> 00:07:43,050
and they can pick whatever TV show they want

213
00:07:43,050 --> 00:07:44,430
during that time slot.

214
00:07:44,430 --> 00:07:46,050
Now, this may or may not line up

215
00:07:46,050 --> 00:07:47,970
with the time that their show is actually on,

216
00:07:47,970 --> 00:07:49,830
and that could cause a problem, right?

217
00:07:49,830 --> 00:07:51,240
So, we have this second method

218
00:07:51,240 --> 00:07:55,440
called Statistical Time-Division Multiplexing, or StatTDM.

219
00:07:55,440 --> 00:07:56,910
This is a more efficient version

220
00:07:56,910 --> 00:07:58,590
of Time-Division Multiplexing,

221
00:07:58,590 --> 00:08:01,500
because it's going to dynamically allocate these time slots

222
00:08:01,500 --> 00:08:03,510
based on when people need it.

223
00:08:03,510 --> 00:08:06,690
So, if we take our TV example, maybe for example

224
00:08:06,690 --> 00:08:09,570
I want to go down and nobody's watching TV at eight o'clock,

225
00:08:09,570 --> 00:08:11,310
but it wasn't my time slot.

226
00:08:11,310 --> 00:08:13,290
Well, under Time-Division Multiplexing,

227
00:08:13,290 --> 00:08:16,350
I couldn't turn on the TV, because it wasn't my time slot,

228
00:08:16,350 --> 00:08:18,570
but with StatTDM I can,

229
00:08:18,570 --> 00:08:20,790
because as long as nobody's using the TV,

230
00:08:20,790 --> 00:08:22,380
anyone's free to use it.

231
00:08:22,380 --> 00:08:24,870
Everyone's going to take turns based on their necessity,

232
00:08:24,870 --> 00:08:26,760
not based on the time itself.

233
00:08:26,760 --> 00:08:29,550
So instead, when I start watching the TV at eight o'clock,

234
00:08:29,550 --> 00:08:30,900
then after my 30 minutes is up,

235
00:08:30,900 --> 00:08:33,600
I'm going to get off at 08:30 so somebody else can get on.

236
00:08:33,600 --> 00:08:36,299
Even though my assigned time slot under TDM

237
00:08:36,299 --> 00:08:38,640
might've been something like 09:00 to 09:30.

238
00:08:38,640 --> 00:08:40,380
Now, our last method is what's known

239
00:08:40,380 --> 00:08:43,770
as Frequency-Division Multiplexing, or FDM.

240
00:08:43,770 --> 00:08:46,560
This is going to involve taking the medium, that cable,

241
00:08:46,560 --> 00:08:48,210
and splitting it up into channels

242
00:08:48,210 --> 00:08:50,400
similar to the way we do in broadband.

243
00:08:50,400 --> 00:08:53,511
So, if I take a single cable and I break it up into 50,

244
00:08:53,511 --> 00:08:55,770
100, or 200 different frequencies,

245
00:08:55,770 --> 00:08:57,870
then each person can get a small portion

246
00:08:57,870 --> 00:08:59,340
of frequency allotted to them

247
00:08:59,340 --> 00:09:01,384
and they can use it as much as they want.

248
00:09:01,384 --> 00:09:03,990
Now, for the exam, the good news is

249
00:09:03,990 --> 00:09:07,950
you don't need to memorize TDM, StatTDM, and FDM,

250
00:09:07,950 --> 00:09:09,780
but rather you just need to understand that

251
00:09:09,780 --> 00:09:13,800
multiplexing involves taking some limited amount of resource

252
00:09:13,800 --> 00:09:15,690
and using it more efficiently.

253
00:09:15,690 --> 00:09:16,740
In the real world,

254
00:09:16,740 --> 00:09:19,110
you may come across these multiplexing techniques,

255
00:09:19,110 --> 00:09:20,460
especially if you start working

256
00:09:20,460 --> 00:09:22,920
as a network engineer or a network architect,

257
00:09:22,920 --> 00:09:24,720
and that's why I wanted to introduce 'em to you.

258
00:09:24,720 --> 00:09:26,490
But for the Network Plus exam,

259
00:09:26,490 --> 00:09:30,210
just remember, multiplexing allows multiple people

260
00:09:30,210 --> 00:09:33,831
to use a baseband connection at the same time.

261
00:09:33,831 --> 00:09:36,710
The final thing we need to talk about in this lesson

262
00:09:36,710 --> 00:09:40,500
is some examples of physical or layer 1 devices.

263
00:09:40,500 --> 00:09:42,840
The most common one is going to be a cable.

264
00:09:42,840 --> 00:09:44,520
So, if I have a fiber optic cable,

265
00:09:44,520 --> 00:09:47,370
or an ethernet cable, or a coaxial cable,

266
00:09:47,370 --> 00:09:49,590
these are all different types of media.

267
00:09:49,590 --> 00:09:50,880
And if I have different types of media,

268
00:09:50,880 --> 00:09:53,370
that's considered a layer 1 device.

269
00:09:53,370 --> 00:09:55,830
The reason is, whatever goes in one end of the cable

270
00:09:55,830 --> 00:09:57,720
is going to come out the other end of the cable.

271
00:09:57,720 --> 00:09:59,010
So, if I have a fiber optic cable

272
00:09:59,010 --> 00:10:00,330
and I put light in one end,

273
00:10:00,330 --> 00:10:02,040
I'm going to get light out the other end.

274
00:10:02,040 --> 00:10:03,720
That's a physical response,

275
00:10:03,720 --> 00:10:06,210
a physical layer of the OSI model.

276
00:10:06,210 --> 00:10:08,280
Additionally, beyond wired cables,

277
00:10:08,280 --> 00:10:10,050
we also have wireless things.

278
00:10:10,050 --> 00:10:12,120
Things like Bluetooth, and Wi-Fi,

279
00:10:12,120 --> 00:10:13,710
and Near Field Communication (NFC).

280
00:10:13,710 --> 00:10:16,530
All of these radio frequencies make up the media

281
00:10:16,530 --> 00:10:19,980
at layer 1 for those type of networks.

282
00:10:19,980 --> 00:10:22,740
The final example is infrastructure devices,

283
00:10:22,740 --> 00:10:24,390
and that would be things like hubs,

284
00:10:24,390 --> 00:10:26,790
access points, and media converters.

285
00:10:26,790 --> 00:10:30,150
All of these devices operate at the bit layer.

286
00:10:30,150 --> 00:10:31,320
This is going to be a function

287
00:10:31,320 --> 00:10:33,150
should just simply repeat what they get.

288
00:10:33,150 --> 00:10:35,670
So, if I have a hub, whatever goes in port one of the hub

289
00:10:35,670 --> 00:10:38,250
is coming out ports two, three, and four,

290
00:10:38,250 --> 00:10:40,350
whatever comes in, gets repeated out.

291
00:10:40,350 --> 00:10:42,000
The same thing with a media converter.

292
00:10:42,000 --> 00:10:44,490
If I have something coming in over coaxial,

293
00:10:44,490 --> 00:10:46,260
it's going to get converted through media

294
00:10:46,260 --> 00:10:48,150
and pushed out over fiber optic.

295
00:10:48,150 --> 00:10:51,720
That device is simply doing it at the physical layer,

296
00:10:51,720 --> 00:10:53,400
and whatever comes in is going to go out.

297
00:10:53,400 --> 00:10:54,570
There's no logic to it.

298
00:10:54,570 --> 00:10:56,220
There's no intelligence to it.

299
00:10:56,220 --> 00:10:59,850
Layer 1 devices simply repeat whatever they're told.

300
00:10:59,850 --> 00:11:02,010
Now, we'll talk about some other infrastructure devices

301
00:11:02,010 --> 00:11:04,680
as we get into layers 2 and 3 and 4,

302
00:11:04,680 --> 00:11:06,420
but for right now, I want you to remember

303
00:11:06,420 --> 00:11:10,320
layer 1 is dumb devices, they're simply repeaters.

304
00:11:10,320 --> 00:11:12,813
Whatever they take in, they send right back out.

