1
00:00:00,000 --> 00:00:01,589
Now that we're at the network layer,

2
00:00:01,589 --> 00:00:03,420
we're concerned with routing.

3
00:00:03,420 --> 00:00:06,360
Layer three is all about how we're going to forward traffic,

4
00:00:06,360 --> 00:00:09,900
which we refer to as routing, using logical addresses.

5
00:00:09,900 --> 00:00:13,290
For example, your computer has an IP address,

6
00:00:13,290 --> 00:00:17,023
and that IP address is either going to be an IPv4

7
00:00:17,023 --> 00:00:19,560
or an IPv6 address, or both.

8
00:00:19,560 --> 00:00:22,470
Now, both of these are considered layer three protocols.

9
00:00:22,470 --> 00:00:23,700
And we're going to talk more about them

10
00:00:23,700 --> 00:00:25,680
as we go through this course.

11
00:00:25,680 --> 00:00:27,960
Now, the other thing we're going to be concerned with here is

12
00:00:27,960 --> 00:00:29,610
logical addressing.

13
00:00:29,610 --> 00:00:32,220
I mentioned that IPv4 and IPv6 are

14
00:00:32,220 --> 00:00:34,200
two types of logical addresses,

15
00:00:34,200 --> 00:00:36,720
but they're not the only logical addressing schemes

16
00:00:36,720 --> 00:00:37,710
that are out there.

17
00:00:37,710 --> 00:00:41,130
They're just the most common and most popular these days.

18
00:00:41,130 --> 00:00:42,510
Now, we're also going to be concerned

19
00:00:42,510 --> 00:00:44,250
with what's known as switching.

20
00:00:44,250 --> 00:00:45,900
And here when we talk about switching,

21
00:00:45,900 --> 00:00:48,510
we're actually talking about layer-three switching,

22
00:00:48,510 --> 00:00:49,980
which is called routing.

23
00:00:49,980 --> 00:00:51,360
Now, I know this gets confusing

24
00:00:51,360 --> 00:00:53,190
because they're using the term switching

25
00:00:53,190 --> 00:00:55,200
to refer to the function of routing,

26
00:00:55,200 --> 00:00:57,000
and when we talk about switches,

27
00:00:57,000 --> 00:00:59,310
the devices being layer two devices.

28
00:00:59,310 --> 00:01:00,900
So you have to keep this straight in your head.

29
00:01:00,900 --> 00:01:03,930
Switches, the physical device are layer two.

30
00:01:03,930 --> 00:01:06,360
Switching is another term for routing,

31
00:01:06,360 --> 00:01:07,950
which is how we transfer things

32
00:01:07,950 --> 00:01:10,770
at the network layer, layer three.

33
00:01:10,770 --> 00:01:12,450
Now, as we talk about all this,

34
00:01:12,450 --> 00:01:13,800
another thing we comes up is

35
00:01:13,800 --> 00:01:16,950
how we're going to do route discovery and selection.

36
00:01:16,950 --> 00:01:18,300
Now basically that means,

37
00:01:18,300 --> 00:01:21,330
how do I know which way I want the traffic to go?

38
00:01:21,330 --> 00:01:23,160
We're going to talk a little bit more about that too

39
00:01:23,160 --> 00:01:24,660
as we go through this lesson,

40
00:01:24,660 --> 00:01:26,850
because we're going to talk about connection services,

41
00:01:26,850 --> 00:01:29,700
and bandwidth utilization, and multiplexing strategies.

42
00:01:29,700 --> 00:01:32,250
All of this is at the layer three of the OC model.

43
00:01:32,250 --> 00:01:34,500
So to start diving in deeper into these concepts,

44
00:01:34,500 --> 00:01:36,990
let's start out with logical addresses.

45
00:01:36,990 --> 00:01:39,240
There are lots of different routed protocols

46
00:01:39,240 --> 00:01:41,040
that have been used over the years.

47
00:01:41,040 --> 00:01:42,750
Back in the '80s and '90s,

48
00:01:42,750 --> 00:01:45,270
there was AppleTalk for Apple computers.

49
00:01:45,270 --> 00:01:48,300
And if you used a Windows or a Novell network computer,

50
00:01:48,300 --> 00:01:49,890
you might have used IPX,

51
00:01:49,890 --> 00:01:52,470
which was the Internetwork Packet Exchange.

52
00:01:52,470 --> 00:01:54,240
Now, neither of these two are important

53
00:01:54,240 --> 00:01:56,160
for the Network+ certification,

54
00:01:56,160 --> 00:01:57,660
but it is something that I want to bring up

55
00:01:57,660 --> 00:01:59,760
because you may hear these terms.

56
00:01:59,760 --> 00:02:02,640
Really what happened was these were both killed off

57
00:02:02,640 --> 00:02:05,550
by internet protocol, which is known as IP.

58
00:02:05,550 --> 00:02:07,050
This became the common protocol

59
00:02:07,050 --> 00:02:09,120
that everyone uses on all networks.

60
00:02:09,120 --> 00:02:10,979
And therefore we didn't need AppleTalk

61
00:02:10,979 --> 00:02:12,960
and we didn't need IPX anymore.

62
00:02:12,960 --> 00:02:16,590
But the point is, at layer three, it's not just IP.

63
00:02:16,590 --> 00:02:17,760
There are other protocols

64
00:02:17,760 --> 00:02:20,010
that you could use in layer three.

65
00:02:20,010 --> 00:02:22,410
IP is just the most common.

66
00:02:22,410 --> 00:02:24,270
Now, some of those are still existing

67
00:02:24,270 --> 00:02:25,590
on some legacy systems,

68
00:02:25,590 --> 00:02:28,680
which means old systems in some corporate network,

69
00:02:28,680 --> 00:02:31,560
but the routing protocol of the internet that we use

70
00:02:31,560 --> 00:02:32,880
and the internet you have at home

71
00:02:32,880 --> 00:02:36,600
and the network you have at home is going to be known as IP.

72
00:02:36,600 --> 00:02:39,450
IP comes in two variants, as I said before,

73
00:02:39,450 --> 00:02:42,150
IPv4 and IPv6.

74
00:02:42,150 --> 00:02:43,860
Now, if you look on the screen here,

75
00:02:43,860 --> 00:02:46,110
there's an example of an IP address.

76
00:02:46,110 --> 00:02:50,673
It's written as 172.16.254.1.

77
00:02:52,140 --> 00:02:53,940
Now we're going to look more at IP addresses

78
00:02:53,940 --> 00:02:57,690
in a separate lesson as we dig deeper into routing later on.

79
00:02:57,690 --> 00:02:58,710
For the time being,

80
00:02:58,710 --> 00:03:00,840
I want you to think of an IP address

81
00:03:00,840 --> 00:03:03,060
anytime you see a number that looks like this.

82
00:03:03,060 --> 00:03:06,120
There's going to be four sets of numbers separated by dots.

83
00:03:06,120 --> 00:03:08,580
This is called a dotted octet notation.

84
00:03:08,580 --> 00:03:11,790
And this is what an IPv4 address is going to look like.

85
00:03:11,790 --> 00:03:14,550
Now, how should we actually forward or route the data

86
00:03:14,550 --> 00:03:15,870
across our networks?

87
00:03:15,870 --> 00:03:18,840
This is really the big question at layer three.

88
00:03:18,840 --> 00:03:21,330
And there are three main ways for us to do this.

89
00:03:21,330 --> 00:03:23,700
You can use packet switching, circuit switching,

90
00:03:23,700 --> 00:03:25,110
or message switching.

91
00:03:25,110 --> 00:03:27,150
The most commonly used one in your network

92
00:03:27,150 --> 00:03:28,350
is going to be routing,

93
00:03:28,350 --> 00:03:30,420
which is also known as packet switching.

94
00:03:30,420 --> 00:03:32,610
This is where data is divided into packets,

95
00:03:32,610 --> 00:03:34,710
and then each packet is forwarded on

96
00:03:34,710 --> 00:03:36,600
based on its IP address.

97
00:03:36,600 --> 00:03:37,740
Now, when I think of routing,

98
00:03:37,740 --> 00:03:40,410
I like to think about this as if I'm going to write a letter

99
00:03:40,410 --> 00:03:41,820
and send it to my mom.

100
00:03:41,820 --> 00:03:43,530
Let's say I put that letter in an envelope,

101
00:03:43,530 --> 00:03:45,060
and on the outside of the envelope,

102
00:03:45,060 --> 00:03:46,890
I'm going to write the address of my mom on it.

103
00:03:46,890 --> 00:03:49,260
I put her city and her state and the zip code.

104
00:03:49,260 --> 00:03:50,670
Now I put that in the mailbox,

105
00:03:50,670 --> 00:03:53,940
and the mail carrier is going to take it to a central location.

106
00:03:53,940 --> 00:03:56,340
Here, they're going to figure out what state it goes to.

107
00:03:56,340 --> 00:03:59,280
And then they're going to send it to that state's post office.

108
00:03:59,280 --> 00:04:01,830
Once it's in that state, it's going to go down even further.

109
00:04:01,830 --> 00:04:04,410
And they're going to go down to the city-level post office.

110
00:04:04,410 --> 00:04:06,810
And then from that city-level post office,

111
00:04:06,810 --> 00:04:08,850
they're going to look at where the street address is,

112
00:04:08,850 --> 00:04:09,930
get it to the right street,

113
00:04:09,930 --> 00:04:12,900
and eventually get it to her house on that street.

114
00:04:12,900 --> 00:04:16,110
The same kind of concept works with IP addresses.

115
00:04:16,110 --> 00:04:17,519
And that's the idea here.

116
00:04:17,519 --> 00:04:19,829
It's going to keep going and switching that packet

117
00:04:19,829 --> 00:04:23,100
from place to place until it gets to its final destination,

118
00:04:23,100 --> 00:04:25,890
in the case of my envelope to my mom's address.

119
00:04:25,890 --> 00:04:26,723
Now that's the way

120
00:04:26,723 --> 00:04:28,980
that packet switching is going to work for us.

121
00:04:28,980 --> 00:04:30,420
Every time I send a letter out,

122
00:04:30,420 --> 00:04:32,370
it might take a different route to get there.

123
00:04:32,370 --> 00:04:34,110
And I really don't care which route it takes

124
00:04:34,110 --> 00:04:36,720
as long as it gets to its final destination.

125
00:04:36,720 --> 00:04:39,120
It's the same thing with our packets in the network.

126
00:04:39,120 --> 00:04:41,190
When I talk about circuit switching though,

127
00:04:41,190 --> 00:04:43,260
this is where we want to have the same path

128
00:04:43,260 --> 00:04:44,670
each and every time.

129
00:04:44,670 --> 00:04:46,890
We're going to get a dedicated communication link

130
00:04:46,890 --> 00:04:48,930
that's established between our two devices.

131
00:04:48,930 --> 00:04:51,060
And if I pick up the phone to make a phone call,

132
00:04:51,060 --> 00:04:54,210
I'm actually going to make a virtual connection from my phone

133
00:04:54,210 --> 00:04:57,270
over to the other receiver's phone on the other end.

134
00:04:57,270 --> 00:04:58,980
So if I pick up the phone to call you,

135
00:04:58,980 --> 00:05:00,630
there's going to be a temporary connection made

136
00:05:00,630 --> 00:05:02,520
between my phone and your phone,

137
00:05:02,520 --> 00:05:03,390
and all the data

138
00:05:03,390 --> 00:05:05,130
that we're talking back and forth will go

139
00:05:05,130 --> 00:05:07,920
across the same path to get from me to you.

140
00:05:07,920 --> 00:05:09,630
The whole time we have this conversation going on,

141
00:05:09,630 --> 00:05:11,070
that's what's going to happen.

142
00:05:11,070 --> 00:05:13,830
That's what we call a circuit switch connection,

143
00:05:13,830 --> 00:05:16,380
which is different than the packet switch connection

144
00:05:16,380 --> 00:05:17,400
of using an envelope

145
00:05:17,400 --> 00:05:19,290
where we don't care where all those envelopes go

146
00:05:19,290 --> 00:05:21,690
as long as they got to the right place at the end.

147
00:05:21,690 --> 00:05:23,430
Now, when we hang up the phone

148
00:05:23,430 --> 00:05:24,810
and we go to make another call,

149
00:05:24,810 --> 00:05:26,190
it could take a different path.

150
00:05:26,190 --> 00:05:27,330
And that's okay.

151
00:05:27,330 --> 00:05:30,270
But for the entire session of us having our phone call,

152
00:05:30,270 --> 00:05:31,740
we want the same path.

153
00:05:31,740 --> 00:05:34,440
And that's what circuit switching allows us to do.

154
00:05:34,440 --> 00:05:36,780
Now, the third type of switching we have is known

155
00:05:36,780 --> 00:05:38,250
as message switching.

156
00:05:38,250 --> 00:05:39,390
And with message switching,

157
00:05:39,390 --> 00:05:42,030
this is where all the data is divided into messages.

158
00:05:42,030 --> 00:05:44,340
And they're similar to packet switching in this idea,

159
00:05:44,340 --> 00:05:47,520
but the messages can actually be stored and forwarded

160
00:05:47,520 --> 00:05:48,870
more like email.

161
00:05:48,870 --> 00:05:51,030
So if you go back to my mail example,

162
00:05:51,030 --> 00:05:52,560
maybe it gets to my mom's state,

163
00:05:52,560 --> 00:05:55,200
but the post office is closed because it's Sunday.

164
00:05:55,200 --> 00:05:56,190
So what happens is

165
00:05:56,190 --> 00:05:58,920
they drop all those envelopes on the floor.

166
00:05:58,920 --> 00:06:00,330
Now, it's going to be held there

167
00:06:00,330 --> 00:06:02,370
until they open again on Monday

168
00:06:02,370 --> 00:06:03,720
and somebody's going to be able to pick it up,

169
00:06:03,720 --> 00:06:06,060
figure out where it goes and push it along.

170
00:06:06,060 --> 00:06:07,020
This is what happens

171
00:06:07,020 --> 00:06:08,670
when you're dealing with message switching,

172
00:06:08,670 --> 00:06:11,160
because it has this store and forward capability.

173
00:06:11,160 --> 00:06:13,140
If we were using just packet switching,

174
00:06:13,140 --> 00:06:15,240
what would end up happening is if it got to the post office

175
00:06:15,240 --> 00:06:16,830
and the post office was closed,

176
00:06:16,830 --> 00:06:18,750
it would actually just shred that envelope

177
00:06:18,750 --> 00:06:20,190
and nobody would ever see it.

178
00:06:20,190 --> 00:06:21,023
That's a bad thing

179
00:06:21,023 --> 00:06:23,430
if we want to make sure the data's going to get where it's going.

180
00:06:23,430 --> 00:06:27,090
And that's why message switching can be very useful for us.

181
00:06:27,090 --> 00:06:29,100
Now, almost all of our networks nowadays

182
00:06:29,100 --> 00:06:31,200
and the ones you utilize are going to be using

183
00:06:31,200 --> 00:06:32,520
packet switching though.

184
00:06:32,520 --> 00:06:34,740
And the reason is we have other methods

185
00:06:34,740 --> 00:06:35,670
that will check

186
00:06:35,670 --> 00:06:37,800
if something is not getting to the distant end.

187
00:06:37,800 --> 00:06:39,690
And it'll be resend over another path

188
00:06:39,690 --> 00:06:41,280
until it finally gets there.

189
00:06:41,280 --> 00:06:42,120
So unless you're dealing

190
00:06:42,120 --> 00:06:44,310
with some kind of big backend networks,

191
00:06:44,310 --> 00:06:46,410
you're not really going to see something like circuit switching

192
00:06:46,410 --> 00:06:49,410
or message switching in your normal everyday networks.

193
00:06:49,410 --> 00:06:51,990
Your home network, my small office network,

194
00:06:51,990 --> 00:06:54,120
and most of the internet actually works

195
00:06:54,120 --> 00:06:55,470
using packet switching.

196
00:06:55,470 --> 00:06:57,480
Now, the second thing we have to talk about is

197
00:06:57,480 --> 00:06:59,370
route discovery and selection.

198
00:06:59,370 --> 00:07:01,800
How are we going to decide which path we're going to take

199
00:07:01,800 --> 00:07:03,540
to send that message?

200
00:07:03,540 --> 00:07:06,300
Well, routers are going to maintain a routing table

201
00:07:06,300 --> 00:07:08,370
so they can understand how to forward a packet

202
00:07:08,370 --> 00:07:11,520
based on the destination IP of where it wants to get to.

203
00:07:11,520 --> 00:07:13,680
There are lots of different ways that it can do this.

204
00:07:13,680 --> 00:07:15,720
And they can do this either as a static route

205
00:07:15,720 --> 00:07:18,600
or a dynamically assigned route using a routing protocol

206
00:07:18,600 --> 00:07:23,460
like RIP, OSPF, EIGRP, and many others.

207
00:07:23,460 --> 00:07:25,140
Now, we're going to talk about many of those

208
00:07:25,140 --> 00:07:26,640
later on in this course.

209
00:07:26,640 --> 00:07:27,473
So we're not going to talk

210
00:07:27,473 --> 00:07:29,730
specifically about how it works right now.

211
00:07:29,730 --> 00:07:31,440
We're just going to put that to the side,

212
00:07:31,440 --> 00:07:32,460
but I want you to remember

213
00:07:32,460 --> 00:07:34,920
that routing protocols help us decide

214
00:07:34,920 --> 00:07:37,350
how data is going to flow across the network

215
00:07:37,350 --> 00:07:40,290
and how the routers are going to communicate that information.

216
00:07:40,290 --> 00:07:42,660
For now, let's just use the example on the screen

217
00:07:42,660 --> 00:07:46,110
to give us a really basic idea of how routing works.

218
00:07:46,110 --> 00:07:48,330
Let's say that I'm sitting in router number five

219
00:07:48,330 --> 00:07:49,830
at the bottom right corner

220
00:07:49,830 --> 00:07:51,750
and I want to get to router number one.

221
00:07:51,750 --> 00:07:53,340
Well, how should I do it?

222
00:07:53,340 --> 00:07:56,640
I can go from five to four to one, and that would work.

223
00:07:56,640 --> 00:08:00,180
But I can also go from five to four to three to two to one,

224
00:08:00,180 --> 00:08:01,620
and that would also work.

225
00:08:01,620 --> 00:08:04,290
So how do I know which way is going to be the best way

226
00:08:04,290 --> 00:08:05,760
for me to go?

227
00:08:05,760 --> 00:08:08,640
Well, if I end up using a dynamic protocol,

228
00:08:08,640 --> 00:08:10,860
all of these routers continually talk to each other

229
00:08:10,860 --> 00:08:11,850
all the time,

230
00:08:11,850 --> 00:08:13,980
and they tell each other which way they know

231
00:08:13,980 --> 00:08:15,270
how to get to other routers

232
00:08:15,270 --> 00:08:18,060
and which one is the best and fastest route.

233
00:08:18,060 --> 00:08:19,830
So if you think about this like streets,

234
00:08:19,830 --> 00:08:21,570
when you type into your GPS

235
00:08:21,570 --> 00:08:23,400
that you want to go from point A to point B

236
00:08:23,400 --> 00:08:24,840
to get to the grocery store,

237
00:08:24,840 --> 00:08:27,030
it may take you three or four different ways

238
00:08:27,030 --> 00:08:30,000
depending on the time of day, the traffic, the congestion,

239
00:08:30,000 --> 00:08:31,950
and a number of other factors.

240
00:08:31,950 --> 00:08:34,500
Routers are doing the exact same thing.

241
00:08:34,500 --> 00:08:35,677
All talk to each other and say,

242
00:08:35,677 --> 00:08:37,590
"Hey, I've got a better way for you

243
00:08:37,590 --> 00:08:39,210
to get from point A to point B

244
00:08:39,210 --> 00:08:41,490
because there's too much traffic on this direction.

245
00:08:41,490 --> 00:08:43,860
So you should go and take this other route instead."

246
00:08:43,860 --> 00:08:47,220
That's the idea with route discovery and route selection.

247
00:08:47,220 --> 00:08:49,230
Now, the next thing we need to talk about here is

248
00:08:49,230 --> 00:08:50,790
connection services.

249
00:08:50,790 --> 00:08:52,920
And connection services are going to augment

250
00:08:52,920 --> 00:08:54,690
our layer-two connection services

251
00:08:54,690 --> 00:08:56,100
that we talked about previously

252
00:08:56,100 --> 00:08:58,560
and provide us with some additional reliability.

253
00:08:58,560 --> 00:09:01,530
Again, we're going to have some more flow control added here.

254
00:09:01,530 --> 00:09:02,880
And this is going to prevent the sender

255
00:09:02,880 --> 00:09:05,970
from sending data faster than the receiver can get it.

256
00:09:05,970 --> 00:09:08,250
Again, that's the way that we have flow control there,

257
00:09:08,250 --> 00:09:09,083
so it can say,

258
00:09:09,083 --> 00:09:10,590
"Hey, hey, hey, slow down.

259
00:09:10,590 --> 00:09:12,270
You're sending me too much data,"

260
00:09:12,270 --> 00:09:15,480
or, "Speed up, I can take more. I'm ready for more."

261
00:09:15,480 --> 00:09:17,970
We also have this thing called packet reordering.

262
00:09:17,970 --> 00:09:20,280
Now, packet reordering is really important

263
00:09:20,280 --> 00:09:23,040
because it allows us to take this big chunk of data,

264
00:09:23,040 --> 00:09:25,080
cut it up into little pieces of packets,

265
00:09:25,080 --> 00:09:28,020
and then send all those packets off in different directions

266
00:09:28,020 --> 00:09:29,820
to get to their final destination.

267
00:09:29,820 --> 00:09:30,960
Now, the problem is

268
00:09:30,960 --> 00:09:33,120
sometimes these packets are going to arrive

269
00:09:33,120 --> 00:09:35,250
at the destination in the wrong order.

270
00:09:35,250 --> 00:09:38,220
And so packet reordering allows them to get all this data

271
00:09:38,220 --> 00:09:40,770
at the end destination, at the receiver,

272
00:09:40,770 --> 00:09:41,603
and they can take and say,

273
00:09:41,603 --> 00:09:45,120
"Okay, I got packet one and packet five and packet two

274
00:09:45,120 --> 00:09:47,010
and packet four and packet three.

275
00:09:47,010 --> 00:09:48,780
and then I'm going to put them in the right order.

276
00:09:48,780 --> 00:09:50,520
One, two, three, four, five,

277
00:09:50,520 --> 00:09:53,730
and then I can put that data back together in what it is.

278
00:09:53,730 --> 00:09:56,460
And now I have the full piece of data together."

279
00:09:56,460 --> 00:09:58,590
The benefit here is that because of routing,

280
00:09:58,590 --> 00:10:00,990
each packet gets numbered and sequenced,

281
00:10:00,990 --> 00:10:03,630
and so even if they get to the other end out of order,

282
00:10:03,630 --> 00:10:05,670
we can put them back into the right order

283
00:10:05,670 --> 00:10:08,100
and read them as a coherent message.

284
00:10:08,100 --> 00:10:09,480
The next thing we need to talk about here

285
00:10:09,480 --> 00:10:11,820
at layer three is known as ICMP,

286
00:10:11,820 --> 00:10:14,460
or the Internet Control Message Protocol.

287
00:10:14,460 --> 00:10:16,350
ICMP is used to send messages

288
00:10:16,350 --> 00:10:19,890
and operational information to an IP destination.

289
00:10:19,890 --> 00:10:24,060
The most commonly used one is known as ping, P-I-N-G.

290
00:10:24,060 --> 00:10:26,160
And we're going to talk specifically about that tool

291
00:10:26,160 --> 00:10:28,230
in our troubleshooting lecture.

292
00:10:28,230 --> 00:10:29,880
As you can see in this example,

293
00:10:29,880 --> 00:10:33,990
we can send out a single packet as a test to example.com.

294
00:10:33,990 --> 00:10:35,160
And when it comes back,

295
00:10:35,160 --> 00:10:37,530
we can then say if that site is up or down.

296
00:10:37,530 --> 00:10:38,820
This is what ping does.

297
00:10:38,820 --> 00:10:39,960
It sends out a packet

298
00:10:39,960 --> 00:10:42,690
and tells us if it was received or not by the distant end

299
00:10:42,690 --> 00:10:44,160
and how long it took.

300
00:10:44,160 --> 00:10:44,993
In this case,

301
00:10:44,993 --> 00:10:47,340
we got a response back five different times

302
00:10:47,340 --> 00:10:48,810
showing that it was up

303
00:10:48,810 --> 00:10:51,060
and we were able to get to that distant end.

304
00:10:51,060 --> 00:10:53,160
Now, this is not a tool that's used regularly

305
00:10:53,160 --> 00:10:54,780
by end user applications,

306
00:10:54,780 --> 00:10:56,880
but it is used by us as administrators

307
00:10:56,880 --> 00:10:58,920
to help troubleshoot our network and figure out

308
00:10:58,920 --> 00:11:00,450
what is up, and what is down,

309
00:11:00,450 --> 00:11:02,040
and what isn't working.

310
00:11:02,040 --> 00:11:05,190
Again, the most commonly used one here is going to be ping,

311
00:11:05,190 --> 00:11:08,010
but there's another variation of it known as traceroute,

312
00:11:08,010 --> 00:11:10,080
which will trace the route that a packet takes

313
00:11:10,080 --> 00:11:11,070
through the network

314
00:11:11,070 --> 00:11:13,440
and tells you every single router along the way

315
00:11:13,440 --> 00:11:14,670
as it goes through,

316
00:11:14,670 --> 00:11:16,920
essentially doing a large series of pings

317
00:11:16,920 --> 00:11:18,150
through each and every router

318
00:11:18,150 --> 00:11:19,890
so you can figure out which routes we're up

319
00:11:19,890 --> 00:11:21,330
and which routes we're down.

320
00:11:21,330 --> 00:11:23,880
Now, what are some examples of layer-three devices

321
00:11:23,880 --> 00:11:25,740
that we need to remember for the exam?

322
00:11:25,740 --> 00:11:27,540
Well, the first two you have to remember are

323
00:11:27,540 --> 00:11:29,820
routers and multi-layer switches.

324
00:11:29,820 --> 00:11:31,920
Router looks like this icon here.

325
00:11:31,920 --> 00:11:33,180
You can see it's on the screen.

326
00:11:33,180 --> 00:11:35,010
It's a circle with four arrows.

327
00:11:35,010 --> 00:11:37,050
And this is a depiction of what a router looks like

328
00:11:37,050 --> 00:11:38,820
in a logical diagram.

329
00:11:38,820 --> 00:11:41,850
Now, a multi-layer switch works like a regular switch

330
00:11:41,850 --> 00:11:43,350
and our router combined.

331
00:11:43,350 --> 00:11:45,840
So it has both features of a layer-two switch

332
00:11:45,840 --> 00:11:48,630
and a layer-three router in the single device,

333
00:11:48,630 --> 00:11:51,030
which is why it's considered a layer-three device.

334
00:11:51,030 --> 00:11:52,380
Again, for the exam,

335
00:11:52,380 --> 00:11:55,230
remember that a switch is always a layer-two device

336
00:11:55,230 --> 00:11:56,940
unless they specifically tell you

337
00:11:56,940 --> 00:11:58,830
that it is a multi-layer switch.

338
00:11:58,830 --> 00:12:00,270
If it's a multi-layer switch,

339
00:12:00,270 --> 00:12:03,030
it is going to be considered a layer-three device.

340
00:12:03,030 --> 00:12:05,370
Now, some other things that we have is going to be things

341
00:12:05,370 --> 00:12:07,410
like IPv4 and IPv6.

342
00:12:07,410 --> 00:12:09,690
These are both layer-three protocols.

343
00:12:09,690 --> 00:12:12,840
We also have ICMP, the Internet Control Message Protocol,

344
00:12:12,840 --> 00:12:15,480
that we just talked about that's used in troubleshooting.

345
00:12:15,480 --> 00:12:18,150
All of these are found at layer three.

346
00:12:18,150 --> 00:12:20,610
The best one to remember is IP and routers,

347
00:12:20,610 --> 00:12:22,560
because these are going to be the most common ones

348
00:12:22,560 --> 00:12:24,120
you're going to see on test A

349
00:12:24,120 --> 00:12:27,003
if they ask you for examples of a layer-three device.

