1
00:00:00,120 --> 00:00:00,990
In this lesson,

2
00:00:00,990 --> 00:00:02,280
we're going to explore the different types

3
00:00:02,280 --> 00:00:03,660
of copper network connections

4
00:00:03,660 --> 00:00:05,730
used in our enterprise networks.

5
00:00:05,730 --> 00:00:08,760
Whether a cable is used for telephones, video, or data,

6
00:00:08,760 --> 00:00:09,690
it needs to be terminated

7
00:00:09,690 --> 00:00:10,770
with the appropriate connector

8
00:00:10,770 --> 00:00:13,020
to use it for your desired application.

9
00:00:13,020 --> 00:00:15,660
Each application, we use a different type of connector,

10
00:00:15,660 --> 00:00:17,130
even though some of them can be used

11
00:00:17,130 --> 00:00:20,250
with the exact same type of copper cable or wiring.

12
00:00:20,250 --> 00:00:23,580
For example, if you run a Cat 5e cable in your home,

13
00:00:23,580 --> 00:00:25,320
you can actually connect a telephone to it

14
00:00:25,320 --> 00:00:27,360
using an RJ-11 connector,

15
00:00:27,360 --> 00:00:29,850
or you can connect a desktop computer to it

16
00:00:29,850 --> 00:00:32,610
if you're using an RJ-45 connector instead.

17
00:00:32,610 --> 00:00:34,860
The cable itself didn't actually change,

18
00:00:34,860 --> 00:00:37,290
just a small plastic connector on the end of it

19
00:00:37,290 --> 00:00:39,390
to meet the needs of your specific application

20
00:00:39,390 --> 00:00:41,520
and its wall jack size and format.

21
00:00:41,520 --> 00:00:44,130
Now, most connectors are called something like RJ

22
00:00:44,130 --> 00:00:47,460
and a number like RJ-11 or RJ-45,

23
00:00:47,460 --> 00:00:49,800
or you may see some of your cables talked about

24
00:00:49,800 --> 00:00:54,660
in terms of RG and a number, like RG-6 and RG-59.

25
00:00:54,660 --> 00:00:57,330
Whenever you see something like RJ and a number,

26
00:00:57,330 --> 00:00:59,310
this refers to a registered jack.

27
00:00:59,310 --> 00:01:02,730
Now, a registered jack, often written as RJ-X

28
00:01:02,730 --> 00:01:05,340
is a standardized telecommunication network interface

29
00:01:05,340 --> 00:01:07,800
for connecting voice and data equipment to a service

30
00:01:07,800 --> 00:01:09,660
provided by a local exchange carrier

31
00:01:09,660 --> 00:01:11,310
or a long distance carrier.

32
00:01:11,310 --> 00:01:14,940
The X inside the RJ-X is really just a placeholder

33
00:01:14,940 --> 00:01:17,070
for the specific standard number you're talking about,

34
00:01:17,070 --> 00:01:21,600
like RJ-11 or RJ-45.

35
00:01:21,600 --> 00:01:24,450
Each RJ number denotes a different physical connector

36
00:01:24,450 --> 00:01:26,010
and its wiring configuration,

37
00:01:26,010 --> 00:01:27,660
and there are dozens of registered jacks

38
00:01:27,660 --> 00:01:28,950
for various purposes.

39
00:01:28,950 --> 00:01:30,540
But as a network technician,

40
00:01:30,540 --> 00:01:34,230
you really just need to focus on RJ-11 and RJ-45

41
00:01:34,230 --> 00:01:36,360
because they're going to be used with a twisted pair of cables

42
00:01:36,360 --> 00:01:38,550
for voice and data networks.

43
00:01:38,550 --> 00:01:40,560
Now, another classification you're going to see

44
00:01:40,560 --> 00:01:44,280
is something known as the RG-X series of designations.

45
00:01:44,280 --> 00:01:46,590
The RG stands for radio guide

46
00:01:46,590 --> 00:01:49,800
and the RG-X works just like an RJ number

47
00:01:49,800 --> 00:01:51,630
or registered jack standard.

48
00:01:51,630 --> 00:01:54,480
The RG though, is going to be used with coaxial cables

49
00:01:54,480 --> 00:01:55,770
for various applications like

50
00:01:55,770 --> 00:01:58,560
high speed internet connections, television connections,

51
00:01:58,560 --> 00:02:00,330
and radio communications.

52
00:02:00,330 --> 00:02:02,010
While there are numerous RG standards

53
00:02:02,010 --> 00:02:03,570
used for various purposes,

54
00:02:03,570 --> 00:02:04,950
as a network technician,

55
00:02:04,950 --> 00:02:06,480
you're likely going to be working with just

56
00:02:06,480 --> 00:02:07,950
two of them most of the time,

57
00:02:07,950 --> 00:02:10,979
and these are RG-6 and RG-59

58
00:02:10,979 --> 00:02:13,080
because they're used for cable television connections

59
00:02:13,080 --> 00:02:16,050
and high speed internet service connections respectively.

60
00:02:16,050 --> 00:02:17,670
So now that you understand a little bit

61
00:02:17,670 --> 00:02:20,250
about the registered jack and radio guide standards,

62
00:02:20,250 --> 00:02:21,690
let's explore some of the most common

63
00:02:21,690 --> 00:02:23,580
copper cable network connection types

64
00:02:23,580 --> 00:02:24,570
that you're going to come across

65
00:02:24,570 --> 00:02:26,250
when working as a network technician,

66
00:02:26,250 --> 00:02:31,250
including RJ-11, RJ-45, F-type and BNC connectors.

67
00:02:31,740 --> 00:02:34,680
First, let's take a look at the RJ-11 connector.

68
00:02:34,680 --> 00:02:37,800
The RJ-11 connector is the standard for telephone wiring

69
00:02:37,800 --> 00:02:38,940
and it's commonly used to connect

70
00:02:38,940 --> 00:02:41,040
telephone equipment to a wall jack.

71
00:02:41,040 --> 00:02:43,590
The RJ-11 connector has a six-position,

72
00:02:43,590 --> 00:02:47,910
two-conductor configuration, known as a 6P2C connector.

73
00:02:47,910 --> 00:02:50,130
This configuration means that the cable's connector

74
00:02:50,130 --> 00:02:52,200
can support up to six slots for pins,

75
00:02:52,200 --> 00:02:54,300
but we typically will only use two of these slots

76
00:02:54,300 --> 00:02:55,700
for a telephone connection.

77
00:02:55,700 --> 00:02:59,040
RJ-11 connectors are considered to be smaller in size,

78
00:02:59,040 --> 00:03:02,040
which does make them ideal for telephone applications.

79
00:03:02,040 --> 00:03:04,770
Unfortunately, RJ-11 connectors are not considered

80
00:03:04,770 --> 00:03:07,410
to be suitable for high speed data transmission, though,

81
00:03:07,410 --> 00:03:08,970
because they only use a limited number

82
00:03:08,970 --> 00:03:11,790
of the inner cables from a twisted pair of cable.

83
00:03:11,790 --> 00:03:14,370
If we want to achieve higher levels of data transfer, though,

84
00:03:14,370 --> 00:03:17,010
we're going to need to move up to the next connector.

85
00:03:17,010 --> 00:03:18,150
The second one we have

86
00:03:18,150 --> 00:03:20,910
is what's known as an RJ-45 connector.

87
00:03:20,910 --> 00:03:24,450
The RJ-45 connector is considered to be a large connector,

88
00:03:24,450 --> 00:03:25,950
and it's the standard for data networks

89
00:03:25,950 --> 00:03:29,250
that utilize copper cables to create your ethernet network.

90
00:03:29,250 --> 00:03:31,950
The RJ-45 connector has an eight-position,

91
00:03:31,950 --> 00:03:33,510
eight-conductor configuration,

92
00:03:33,510 --> 00:03:36,510
which we call an 8P8C connector.

93
00:03:36,510 --> 00:03:39,360
Now, an RJ-45 connector is going to be widely used

94
00:03:39,360 --> 00:03:41,460
in networking to connect computers, switches

95
00:03:41,460 --> 00:03:44,730
and routers together inside of a local area network.

96
00:03:44,730 --> 00:03:46,500
With its eight pin configuration,

97
00:03:46,500 --> 00:03:49,560
RJ-45 connectors can support the high speed data transfer

98
00:03:49,560 --> 00:03:52,320
required in our modern wired ethernet networks.

99
00:03:52,320 --> 00:03:55,950
RJ-45 connectors are used with Cat 5, Cat 5e,

100
00:03:55,950 --> 00:03:59,880
Cat 6, Cat 6a, Cat 7, and Cat 8 cables.

101
00:03:59,880 --> 00:04:01,740
And as the Cat number increases,

102
00:04:01,740 --> 00:04:03,540
the cable and its associated connector

103
00:04:03,540 --> 00:04:05,490
become capable of reaching higher bandwidths

104
00:04:05,490 --> 00:04:06,900
and higher speeds.

105
00:04:06,900 --> 00:04:10,020
This makes RJ-45 connectors the defacto standard

106
00:04:10,020 --> 00:04:12,480
used by most residential and enterprise networks

107
00:04:12,480 --> 00:04:15,480
for their copper cabling and infrastructure needs.

108
00:04:15,480 --> 00:04:18,240
Third, let's move into the F-type connector.

109
00:04:18,240 --> 00:04:20,490
The F-type connector is a screw on connector

110
00:04:20,490 --> 00:04:24,840
commonly used with both the RG-6 and RG-59 cable types.

111
00:04:24,840 --> 00:04:27,630
The F-type connector is the standard for cable television

112
00:04:27,630 --> 00:04:28,980
and satellite connection,

113
00:04:28,980 --> 00:04:31,860
and it can be used for cable internet connections too.

114
00:04:31,860 --> 00:04:34,680
RG-6 is the standard for coaxial cables

115
00:04:34,680 --> 00:04:36,600
as predominantly used in residential

116
00:04:36,600 --> 00:04:39,330
and commercial settings for television, satellite

117
00:04:39,330 --> 00:04:41,460
and cable internet applications.

118
00:04:41,460 --> 00:04:43,440
These coaxial cable types are equipped

119
00:04:43,440 --> 00:04:44,700
with an F-type connector

120
00:04:44,700 --> 00:04:46,350
and are characterized by a thicker gauge

121
00:04:46,350 --> 00:04:48,720
and better shielding compared to their predecessors

122
00:04:48,720 --> 00:04:50,820
like the RG-59.

123
00:04:50,820 --> 00:04:52,650
The design of the RG-6 includes

124
00:04:52,650 --> 00:04:54,630
a single copper conductor at its core,

125
00:04:54,630 --> 00:04:56,160
surrounded by an insulating layer

126
00:04:56,160 --> 00:04:57,330
and a metallic shield,

127
00:04:57,330 --> 00:04:59,370
as well as an outer protective jacket.

128
00:04:59,370 --> 00:05:01,650
The enhanced construction of the RG-6 cable

129
00:05:01,650 --> 00:05:03,240
allows it to support higher bandwidth

130
00:05:03,240 --> 00:05:04,980
and higher frequency applications,

131
00:05:04,980 --> 00:05:06,060
and it makes it well suited

132
00:05:06,060 --> 00:05:07,830
for digital television transmission

133
00:05:07,830 --> 00:05:09,540
and high speed internet services

134
00:05:09,540 --> 00:05:11,520
that are provided through cable modems.

135
00:05:11,520 --> 00:05:13,740
The RG-6 cable is the modern standard

136
00:05:13,740 --> 00:05:15,750
for these applications with a heavier gauge

137
00:05:15,750 --> 00:05:18,750
and better shielding than the older RG-59,

138
00:05:18,750 --> 00:05:20,820
and this allows it to support higher frequencies

139
00:05:20,820 --> 00:05:23,730
over longer distances without signal loss.

140
00:05:23,730 --> 00:05:25,950
Now, you may also find older coaxial cables

141
00:05:25,950 --> 00:05:27,900
being used in your home or office building

142
00:05:27,900 --> 00:05:30,690
that rely on that older RG-59 standard,

143
00:05:30,690 --> 00:05:32,730
so let's talk about that one for a moment.

144
00:05:32,730 --> 00:05:35,820
RG-59 cables use this older specification

145
00:05:35,820 --> 00:05:37,620
that used to be very common for television

146
00:05:37,620 --> 00:05:39,420
and radio signal transmission.

147
00:05:39,420 --> 00:05:42,420
While most RG-59 cables have largely been replaced

148
00:05:42,420 --> 00:05:45,060
by RG-6 cables in most of our applications,

149
00:05:45,060 --> 00:05:46,380
because of those lower bandwidth

150
00:05:46,380 --> 00:05:49,740
and lower frequency capabilities of the RG-59 cables,

151
00:05:49,740 --> 00:05:52,980
you may still find some of those RG 59 cables used

152
00:05:52,980 --> 00:05:56,400
in some of your closed circuit television or CCTV systems.

153
00:05:56,400 --> 00:05:58,260
Since RG-59 only supports

154
00:05:58,260 --> 00:06:00,480
lower bandwidth over shorter distances,

155
00:06:00,480 --> 00:06:02,820
you should never use an RG-59 cable

156
00:06:02,820 --> 00:06:04,020
for any of your high bandwidth

157
00:06:04,020 --> 00:06:07,050
or high definition signal transmission applications.

158
00:06:07,050 --> 00:06:10,290
The fourth one we have is known as a BNC connector.

159
00:06:10,290 --> 00:06:11,730
Now, the BNC connector,

160
00:06:11,730 --> 00:06:14,400
also known as the Bayonet Neill-Concealment connector,

161
00:06:14,400 --> 00:06:17,070
is another type of coaxial connector that's characterized by

162
00:06:17,070 --> 00:06:19,530
its secure bayonet locking mechanism.

163
00:06:19,530 --> 00:06:21,810
The BNC connector is usually going to be used

164
00:06:21,810 --> 00:06:25,200
with the same RG-6 or RG-59 coaxial cables

165
00:06:25,200 --> 00:06:27,360
like you would with an F-type connector.

166
00:06:27,360 --> 00:06:28,980
But instead of creating a screw on connector

167
00:06:28,980 --> 00:06:30,390
like the F-type does,

168
00:06:30,390 --> 00:06:32,940
it's going to provide a push and twist style connector

169
00:06:32,940 --> 00:06:35,850
to lock the cable onto the connection's jack.

170
00:06:35,850 --> 00:06:38,790
The BNC connector is going to feature two bayonet lugs

171
00:06:38,790 --> 00:06:40,020
on the female connector.

172
00:06:40,020 --> 00:06:41,940
They're going to be turned about a quarter turn

173
00:06:41,940 --> 00:06:44,850
to fully mate the cable to the coupling nut on the jack

174
00:06:44,850 --> 00:06:46,740
to create a secure connection.

175
00:06:46,740 --> 00:06:49,920
The BNC connector and its associated RG-6 cabling

176
00:06:49,920 --> 00:06:51,960
are going to use an outer conductor with slots

177
00:06:51,960 --> 00:06:54,300
and some plastic dielectric on each connector

178
00:06:54,300 --> 00:06:55,860
to ensure a good connection is maintained

179
00:06:55,860 --> 00:06:57,630
between your two systems.

180
00:06:57,630 --> 00:06:59,370
You're going to find BNC connectors

181
00:06:59,370 --> 00:07:01,260
are used in professional video connections

182
00:07:01,260 --> 00:07:02,670
such as those found in studios

183
00:07:02,670 --> 00:07:04,290
or video surveillance systems,

184
00:07:04,290 --> 00:07:07,410
as well as in some radio frequency applications too.

185
00:07:07,410 --> 00:07:09,090
The BNC provides us with a quick

186
00:07:09,090 --> 00:07:11,220
and secure connection for coaxial cables,

187
00:07:11,220 --> 00:07:12,840
and they're praised for their reliability

188
00:07:12,840 --> 00:07:14,430
in maintaining a stable connection,

189
00:07:14,430 --> 00:07:17,610
which is critical when working in a professional setting.

190
00:07:17,610 --> 00:07:19,890
Another thing about BNC that you should be aware of

191
00:07:19,890 --> 00:07:22,080
is that many people will erroneously call it

192
00:07:22,080 --> 00:07:23,520
the British Naval Connector

193
00:07:23,520 --> 00:07:26,430
instead of the Bayonet Neill-Concealment connector.

194
00:07:26,430 --> 00:07:28,260
Now, this is because these type of connectors

195
00:07:28,260 --> 00:07:30,540
were first introduced back in the 1940s

196
00:07:30,540 --> 00:07:33,330
to connect different pieces of military radio gear together,

197
00:07:33,330 --> 00:07:35,460
especially on British Navy ships.

198
00:07:35,460 --> 00:07:38,700
So people started calling them the British Naval Connectors

199
00:07:38,700 --> 00:07:41,070
instead of the Bayonet Neill-Concealment connector,

200
00:07:41,070 --> 00:07:43,410
which was named after the people who invented it.

201
00:07:43,410 --> 00:07:45,420
Now, if you remember the term BNC, though,

202
00:07:45,420 --> 00:07:46,860
you're going to be fine either way,

203
00:07:46,860 --> 00:07:48,270
regardless of who you're talking to

204
00:07:48,270 --> 00:07:50,880
about this specific cable connection type.

205
00:07:50,880 --> 00:07:53,220
So remember, there are a few different types of connectors

206
00:07:53,220 --> 00:07:54,210
that you should be aware of

207
00:07:54,210 --> 00:07:55,890
when working as a network technician,

208
00:07:55,890 --> 00:08:00,770
including the RJ-11, RJ-45, F-type, and BNC connectors.

209
00:08:00,770 --> 00:08:03,600
RJ-11 connectors are used for connecting a telephone

210
00:08:03,600 --> 00:08:05,640
to a voice-based communication network.

211
00:08:05,640 --> 00:08:08,670
RJ-45 is going to be used to connect data devices,

212
00:08:08,670 --> 00:08:12,000
including computers, network printers, switches, routers,

213
00:08:12,000 --> 00:08:15,810
and even voiceover protocol devices to your data network.

214
00:08:15,810 --> 00:08:18,240
F-type connectors are used for coaxial cables,

215
00:08:18,240 --> 00:08:19,073
and they're usually found

216
00:08:19,073 --> 00:08:20,040
when you connect your cable modem

217
00:08:20,040 --> 00:08:22,470
to your service provider's coaxial cable service jack

218
00:08:22,470 --> 00:08:23,940
in your home or office.

219
00:08:23,940 --> 00:08:26,010
And a BNC connector is going to be used

220
00:08:26,010 --> 00:08:28,170
to connect professional video devices together

221
00:08:28,170 --> 00:08:30,360
using a simple push and twist connector

222
00:08:30,360 --> 00:08:32,370
instead of relying on the screw type connector

223
00:08:32,370 --> 00:08:35,120
like the F-type connector provides us with our cabling.

