1
00:00:00,080 --> 00:00:00,960
In this lesson,

2
00:00:00,960 --> 00:00:03,660
we're going to cover cable distribution systems.

3
00:00:03,660 --> 00:00:06,240
Now, a cable distribution system is an organized system

4
00:00:06,240 --> 00:00:07,830
to connect the network's backbone

5
00:00:07,830 --> 00:00:09,480
in the main distribution frame

6
00:00:09,480 --> 00:00:11,370
to the intermediate distribution frame,

7
00:00:11,370 --> 00:00:14,220
and then finally to the end user's wall jacks.

8
00:00:14,220 --> 00:00:15,993
When we design a cable distribution system,

9
00:00:15,993 --> 00:00:18,030
it should be hierarchal in nature

10
00:00:18,030 --> 00:00:20,640
so that each cable run is logically placed safely,

11
00:00:20,640 --> 00:00:23,760
securely, and functionally inside of our buildings.

12
00:00:23,760 --> 00:00:25,020
When fully installed,

13
00:00:25,020 --> 00:00:26,340
there are a lot of different components

14
00:00:26,340 --> 00:00:28,500
that make up our cable distribution systems,

15
00:00:28,500 --> 00:00:30,270
including the demarcation point,

16
00:00:30,270 --> 00:00:31,710
the main distribution frame,

17
00:00:31,710 --> 00:00:33,540
the intermediate distribution frame,

18
00:00:33,540 --> 00:00:35,310
the racks, the patch panels,

19
00:00:35,310 --> 00:00:37,410
and the fiber distribution panels.

20
00:00:37,410 --> 00:00:39,810
First we have the demarcation point.

21
00:00:39,810 --> 00:00:41,640
The demarcation point is the location

22
00:00:41,640 --> 00:00:43,380
at which the internet service provider's connection

23
00:00:43,380 --> 00:00:44,310
is going to end,

24
00:00:44,310 --> 00:00:45,630
and your network infrastructure

25
00:00:45,630 --> 00:00:47,610
and cabling will actually begin.

26
00:00:47,610 --> 00:00:50,070
This demarcation point signifies the entrance

27
00:00:50,070 --> 00:00:51,510
where your wide area network connection

28
00:00:51,510 --> 00:00:53,820
is actually going to enter your facility.

29
00:00:53,820 --> 00:00:54,924
In most office buildings,

30
00:00:54,924 --> 00:00:56,760
there's a telecommunications closet

31
00:00:56,760 --> 00:00:58,440
that contains a box inside of it,

32
00:00:58,440 --> 00:01:01,110
and this will serve as your demarcation point.

33
00:01:01,110 --> 00:01:03,005
Basically, your internet service provider,

34
00:01:03,005 --> 00:01:04,769
whether you're using a cable company

35
00:01:04,769 --> 00:01:05,603
or a phone company,

36
00:01:05,603 --> 00:01:06,960
is going to be responsible

37
00:01:06,960 --> 00:01:08,340
for making sure the connection works

38
00:01:08,340 --> 00:01:10,680
up until that demarcation point.

39
00:01:10,680 --> 00:01:12,713
Anything that goes wrong after it reaches that box,

40
00:01:12,713 --> 00:01:14,314
which is your demarcation point,

41
00:01:14,314 --> 00:01:18,000
is now your organization's responsibility to fix and repair

42
00:01:18,000 --> 00:01:19,740
because all of those cables are considered

43
00:01:19,740 --> 00:01:21,870
to be part of your own network infrastructure

44
00:01:21,870 --> 00:01:23,970
and cable distribution system.

45
00:01:23,970 --> 00:01:26,070
Most often, this demarcation point

46
00:01:26,070 --> 00:01:28,740
will be located in your main distribution frame.

47
00:01:28,740 --> 00:01:31,830
Your main distribution frame, also known as the MDF,

48
00:01:31,830 --> 00:01:33,360
will serve as your main starting point

49
00:01:33,360 --> 00:01:35,160
for all of your interior cabling

50
00:01:35,160 --> 00:01:37,470
that is going to be distributed throughout your building.

51
00:01:37,470 --> 00:01:39,210
Every other telecommunications closet

52
00:01:39,210 --> 00:01:40,043
you have in your building

53
00:01:40,043 --> 00:01:43,560
is going to reach back into this main distribution frame too.

54
00:01:43,560 --> 00:01:45,780
I like to think about it like a trunk of a tree

55
00:01:45,780 --> 00:01:46,980
where all the smaller branches

56
00:01:46,980 --> 00:01:49,307
are going to go out to form smaller distribution frames

57
00:01:49,307 --> 00:01:53,430
that we call intermediate distribution frames or IDFs.

58
00:01:53,430 --> 00:01:55,109
Inside of your main distribution frame,

59
00:01:55,109 --> 00:01:57,750
you're going to find your main point of presence router

60
00:01:57,750 --> 00:01:59,400
and your backbone switch.

61
00:01:59,400 --> 00:02:01,080
This switch is called the backbone

62
00:02:01,080 --> 00:02:02,670
because everything else in the network

63
00:02:02,670 --> 00:02:04,440
will connect back into it.

64
00:02:04,440 --> 00:02:05,519
If you have a small network,

65
00:02:05,519 --> 00:02:08,160
you may only have one 24-port switch

66
00:02:08,160 --> 00:02:09,810
that's going to serve all of your users,

67
00:02:09,810 --> 00:02:12,000
and in that case, that single switch

68
00:02:12,000 --> 00:02:14,640
is going to be considered your backbone switch.

69
00:02:14,640 --> 00:02:16,519
But if you work for a larger organization

70
00:02:16,519 --> 00:02:18,577
with hundreds or thousands of users,

71
00:02:18,577 --> 00:02:20,760
you're going to need more than one switch.

72
00:02:20,760 --> 00:02:23,010
So you're going to have a backbone switch,

73
00:02:23,010 --> 00:02:25,140
and then you're going to connect smaller edge switches

74
00:02:25,140 --> 00:02:27,150
in each intermediate distribution frame,

75
00:02:27,150 --> 00:02:29,400
and they're going to connect back to your backbone switch

76
00:02:29,400 --> 00:02:32,151
that's located inside of your main distribution frame.

77
00:02:32,151 --> 00:02:34,500
Now to connect the main distribution frame

78
00:02:34,500 --> 00:02:36,157
to the intermediate distribution frames,

79
00:02:36,157 --> 00:02:37,844
we're going to install cable trays

80
00:02:37,844 --> 00:02:40,530
and then we'll run our cables within these trays.

81
00:02:40,530 --> 00:02:43,590
A cable tray is simply a unit or assembly of units

82
00:02:43,590 --> 00:02:45,600
that form a rigid structural system

83
00:02:45,600 --> 00:02:47,850
to securely support the cables and raceways

84
00:02:47,850 --> 00:02:49,290
that are used by your cables

85
00:02:49,290 --> 00:02:51,360
as they're moving across the building.

86
00:02:51,360 --> 00:02:53,250
When we run our cables horizontally,

87
00:02:53,250 --> 00:02:55,282
we're going to do this inside of these cable trays,

88
00:02:55,282 --> 00:02:57,306
and these trays are usually going to be located

89
00:02:57,306 --> 00:03:00,780
up in the drop ceiling or underneath a raised floor

90
00:03:00,780 --> 00:03:03,270
depending on how your building was constructed.

91
00:03:03,270 --> 00:03:04,920
Now, as you move vertically up or down

92
00:03:04,920 --> 00:03:06,069
between the floors of your building,

93
00:03:06,069 --> 00:03:07,590
you're going to run your cables

94
00:03:07,590 --> 00:03:09,360
through a vertical cross-connect.

95
00:03:09,360 --> 00:03:11,220
In general, it's a best practice

96
00:03:11,220 --> 00:03:12,451
to minimize the number of cables

97
00:03:12,451 --> 00:03:15,480
that you have crossing between your floors vertically.

98
00:03:15,480 --> 00:03:18,360
For this reason, we're usually only going to run trunk cables

99
00:03:18,360 --> 00:03:19,775
to connect your main distribution frame

100
00:03:19,775 --> 00:03:21,020
and its backbone switch

101
00:03:21,020 --> 00:03:23,280
out to the intermediate distribution frames

102
00:03:23,280 --> 00:03:24,390
and their edge routers

103
00:03:24,390 --> 00:03:26,670
through those vertical cross-connects.

104
00:03:26,670 --> 00:03:27,994
Inside your distribution frames,

105
00:03:27,994 --> 00:03:29,670
you'll also find one or more racks

106
00:03:29,670 --> 00:03:31,420
that house your network equipment.

107
00:03:31,420 --> 00:03:33,150
These racks are going to be designed

108
00:03:33,150 --> 00:03:35,310
to hold various devices like switches, routers,

109
00:03:35,310 --> 00:03:37,200
patch panels, and servers

110
00:03:37,200 --> 00:03:39,420
to help facilitate efficient space management

111
00:03:39,420 --> 00:03:42,330
and easy access for your ongoing network maintenance.

112
00:03:42,330 --> 00:03:44,880
These racks are typically made out of sturdy materials

113
00:03:44,880 --> 00:03:46,049
to support the weight of the equipment

114
00:03:46,049 --> 00:03:48,283
and may include features like adjustable shelves,

115
00:03:48,283 --> 00:03:51,960
cable management systems, and lockable doors for security.

116
00:03:51,960 --> 00:03:53,982
These racks come in various shapes and sizes,

117
00:03:53,982 --> 00:03:57,210
but the four most common are called 2-post racks,

118
00:03:57,210 --> 00:04:01,110
4-post racks, wall-mounted racks and rack enclosures.

119
00:04:01,110 --> 00:04:04,110
Now, a 2-post rack is designed with two vertical posts,

120
00:04:04,110 --> 00:04:05,790
and it's commonly used for lighter equipment

121
00:04:05,790 --> 00:04:07,600
or for patch panels and network cabling

122
00:04:07,600 --> 00:04:10,170
inside of a telecommunication setup.

123
00:04:10,170 --> 00:04:13,110
A 4-post rack is designed with four vertical posts,

124
00:04:13,110 --> 00:04:14,520
and it offers enhanced stability

125
00:04:14,520 --> 00:04:16,079
and support that makes it ideal

126
00:04:16,079 --> 00:04:17,744
for heavier equipment like servers,

127
00:04:17,744 --> 00:04:20,970
UPS systems and large network hardware.

128
00:04:20,970 --> 00:04:23,370
Wall-mounted racks are space saving solutions

129
00:04:23,370 --> 00:04:25,290
that are used for smaller networking equipment

130
00:04:25,290 --> 00:04:27,630
and are ideal for environments with limited floor space

131
00:04:27,630 --> 00:04:29,970
and for housing peripheral network components.

132
00:04:29,970 --> 00:04:31,530
I also use wall-mounted racks

133
00:04:31,530 --> 00:04:33,720
to host edge switches inside of offices

134
00:04:33,720 --> 00:04:35,370
when an intermediate distribution frame

135
00:04:35,370 --> 00:04:38,430
was not built into the original office designs.

136
00:04:38,430 --> 00:04:39,630
A full cabinet rack,

137
00:04:39,630 --> 00:04:41,280
also known as a rack enclosure

138
00:04:41,280 --> 00:04:44,580
is a fully enclosed rack with sides, doors, and a top,

139
00:04:44,580 --> 00:04:47,100
and this offers us a secure and protected environment

140
00:04:47,100 --> 00:04:50,190
for high-value equipment like servers, networking devices,

141
00:04:50,190 --> 00:04:51,700
and data storage hardware.

142
00:04:51,700 --> 00:04:54,528
If you're using a wall mounted rack or a rack enclosure,

143
00:04:54,528 --> 00:04:56,857
these also have the option to have a lock installed

144
00:04:56,857 --> 00:04:59,168
that can be locked and unlocked using a key

145
00:04:59,168 --> 00:05:01,590
to keep your servers and other equipment safe

146
00:05:01,590 --> 00:05:04,200
and inaccessible to unauthorized people.

147
00:05:04,200 --> 00:05:06,382
Now, inside of our intermediate distribution frames,

148
00:05:06,382 --> 00:05:07,980
we're going to place any equipment

149
00:05:07,980 --> 00:05:10,500
that we need to support the offices and workstations

150
00:05:10,500 --> 00:05:12,240
that are located closest to it.

151
00:05:12,240 --> 00:05:14,010
If you're in a smaller office building,

152
00:05:14,010 --> 00:05:15,030
you're likely only going to have

153
00:05:15,030 --> 00:05:18,210
one intermediate distribution frame located on each floor,

154
00:05:18,210 --> 00:05:19,580
but if you're in a larger building,

155
00:05:19,580 --> 00:05:22,350
you may have multiple intermediate distribution frames

156
00:05:22,350 --> 00:05:24,000
on each of those floors.

157
00:05:24,000 --> 00:05:24,833
If that's the case,

158
00:05:24,833 --> 00:05:26,070
then you're usually going to go

159
00:05:26,070 --> 00:05:27,206
from the main distribution frame

160
00:05:27,206 --> 00:05:29,490
to one of the intermediate distribution frames

161
00:05:29,490 --> 00:05:30,600
on a given floor,

162
00:05:30,600 --> 00:05:32,250
and then that intermediate distribution frame

163
00:05:32,250 --> 00:05:33,960
you just connected to will now serve

164
00:05:33,960 --> 00:05:35,820
as a mini main distribution frame

165
00:05:35,820 --> 00:05:37,980
for the rest of the intermediate distribution frames

166
00:05:37,980 --> 00:05:39,660
on that particular floor.

167
00:05:39,660 --> 00:05:41,327
From each intermediate distribution frame,

168
00:05:41,327 --> 00:05:42,690
you're going to have the cabling

169
00:05:42,690 --> 00:05:44,938
that runs through the cable trays to the individual offices

170
00:05:44,938 --> 00:05:46,410
and down the walls

171
00:05:46,410 --> 00:05:48,390
where they're going to connect to a wall jack.

172
00:05:48,390 --> 00:05:50,430
These wall jacks are normally going to be configured

173
00:05:50,430 --> 00:05:53,212
to accept an RJ-45 jack in most organizations,

174
00:05:53,212 --> 00:05:55,740
but you can also use fiber wall jacks too

175
00:05:55,740 --> 00:05:57,840
if you require them for additional security

176
00:05:57,840 --> 00:06:00,090
or for higher speed applications.

177
00:06:00,090 --> 00:06:01,804
Now in the intermediate distribution frame,

178
00:06:01,804 --> 00:06:03,300
we also have patch panels

179
00:06:03,300 --> 00:06:05,580
that are going to be installed inside of our racks.

180
00:06:05,580 --> 00:06:07,440
The patch panel is a device or unit

181
00:06:07,440 --> 00:06:09,510
featuring a number of jacks for the use of connecting

182
00:06:09,510 --> 00:06:11,550
and routing circuits for monitoring,

183
00:06:11,550 --> 00:06:13,230
interconnecting and testing circuits

184
00:06:13,230 --> 00:06:15,238
in a more convenient and flexible manner.

185
00:06:15,238 --> 00:06:17,970
Basically, a patch panel is really going to be used

186
00:06:17,970 --> 00:06:20,760
to keep your data center or server room better organized

187
00:06:20,760 --> 00:06:22,710
and as well as making it easier for you to move,

188
00:06:22,710 --> 00:06:25,410
add, or change your cable distribution infrastructure

189
00:06:25,410 --> 00:06:26,730
in the future.

190
00:06:26,730 --> 00:06:29,820
In general, a patch panel is going to have two sides.

191
00:06:29,820 --> 00:06:30,653
On the front side,

192
00:06:30,653 --> 00:06:32,730
you're going to find all of your network jacks,

193
00:06:32,730 --> 00:06:35,460
which includes a series of RJ-45 network ports

194
00:06:35,460 --> 00:06:37,950
if you're using a copper cabling based network

195
00:06:37,950 --> 00:06:39,720
for your distribution system.

196
00:06:39,720 --> 00:06:40,600
On the backside,

197
00:06:40,600 --> 00:06:43,860
you're going to find what looks like a 110 punchdown block

198
00:06:43,860 --> 00:06:45,600
so you can punchdown the copper cables

199
00:06:45,600 --> 00:06:47,490
onto that integrated block.

200
00:06:47,490 --> 00:06:50,070
Now, a 110 block is a type of punchdown block

201
00:06:50,070 --> 00:06:52,650
that we use for both voice and data application,

202
00:06:52,650 --> 00:06:54,210
and anytime we're relying on CAT 5

203
00:06:54,210 --> 00:06:55,710
or newer copper-based networks,

204
00:06:55,710 --> 00:06:57,900
we're going to use a 110 block.

205
00:06:57,900 --> 00:06:59,160
Now, the 110 block

206
00:06:59,160 --> 00:07:01,110
includes the use of insulation displacement

207
00:07:01,110 --> 00:07:03,870
contact connectors to terminate the twisted pair of cables

208
00:07:03,870 --> 00:07:05,430
onto the punchdown blocks

209
00:07:05,430 --> 00:07:07,770
and provide adequate spacing between each cable pair

210
00:07:07,770 --> 00:07:11,070
to help prevent crosstalk and electromagnetic interference

211
00:07:11,070 --> 00:07:12,630
when you're using copper cabling

212
00:07:12,630 --> 00:07:14,385
for your high-speed data networks.

213
00:07:14,385 --> 00:07:16,609
When installing cables on the punchdown block,

214
00:07:16,609 --> 00:07:19,506
you're going to use a tool known as a punchdown tool.

215
00:07:19,506 --> 00:07:21,420
This tool comes with a small blade

216
00:07:21,420 --> 00:07:22,253
that's used to push

217
00:07:22,253 --> 00:07:24,620
the twisted pair cable down into the teeth of the block

218
00:07:24,620 --> 00:07:26,550
and then cut off any excess cabling

219
00:07:26,550 --> 00:07:28,170
from that twisted pair.

220
00:07:28,170 --> 00:07:30,450
This punchdown block is going to allow the connectors

221
00:07:30,450 --> 00:07:32,220
on the block to bite into the cable

222
00:07:32,220 --> 00:07:33,690
in order to make the network connection

223
00:07:33,690 --> 00:07:36,810
and then hold that individual copper wire in place.

224
00:07:36,810 --> 00:07:39,030
So why would I want to go through all this trouble

225
00:07:39,030 --> 00:07:40,170
to use a patch panel

226
00:07:40,170 --> 00:07:42,030
instead of just putting an RJ-45 connector

227
00:07:42,030 --> 00:07:43,440
on the end of one of these copper cables

228
00:07:43,440 --> 00:07:45,309
that are coming into our intermediate distribution frame

229
00:07:45,309 --> 00:07:46,740
and plugging that directly

230
00:07:46,740 --> 00:07:48,990
into a switch port on a router or switch?

231
00:07:48,990 --> 00:07:51,270
Well, you could connect the cable directly,

232
00:07:51,270 --> 00:07:52,620
but we don't consider that

233
00:07:52,620 --> 00:07:55,020
to be a best practice in our industry.

234
00:07:55,020 --> 00:07:56,427
Instead, you should always connect

235
00:07:56,427 --> 00:07:58,486
the wall jacks cable to a patch panel.

236
00:07:58,486 --> 00:08:00,510
This allows the patch panel to provide you

237
00:08:00,510 --> 00:08:03,180
with an easy to use network jack on the front side of it.

238
00:08:03,180 --> 00:08:04,440
Then that way you can connect it

239
00:08:04,440 --> 00:08:06,870
to a switch using a patch cable.

240
00:08:06,870 --> 00:08:09,930
You see, patch panels are really cheap and inexpensive,

241
00:08:09,930 --> 00:08:12,000
and so they protect our expensive network components

242
00:08:12,000 --> 00:08:14,730
from damage when we're moving people and cables around

243
00:08:14,730 --> 00:08:16,432
inside of our enterprise networks.

244
00:08:16,432 --> 00:08:19,259
Every time you plug or unplug a cable into a port,

245
00:08:19,259 --> 00:08:22,200
the more wear and tear is going to occur on that port

246
00:08:22,200 --> 00:08:24,750
and eventually that port will fail.

247
00:08:24,750 --> 00:08:27,450
For this reason, I would rather the patch panel fail

248
00:08:27,450 --> 00:08:29,880
than a port on my expensive switch or router.

249
00:08:29,880 --> 00:08:31,590
So I'm going to punchdown the cable

250
00:08:31,590 --> 00:08:32,970
to the back of the patch panel

251
00:08:32,970 --> 00:08:34,169
and then connect a patch cable

252
00:08:34,169 --> 00:08:36,179
to the front jack on that patch panel

253
00:08:36,179 --> 00:08:37,620
and go from port number one

254
00:08:37,620 --> 00:08:39,360
to port number one on the switch.

255
00:08:39,360 --> 00:08:41,371
Now, if I need to move that port to somewhere else,

256
00:08:41,371 --> 00:08:44,000
I just unplug it from port number one on the patch panel

257
00:08:44,000 --> 00:08:45,750
and plug it into the right port

258
00:08:45,750 --> 00:08:47,940
to go to the other office like port number two

259
00:08:47,940 --> 00:08:50,400
or port number three or whatever, and that way,

260
00:08:50,400 --> 00:08:52,500
instead of moving the connection on the switch itself,

261
00:08:52,500 --> 00:08:54,605
I'm only moving it on the patch panel.

262
00:08:54,605 --> 00:08:57,090
Now if I break a patch panel switchboard,

263
00:08:57,090 --> 00:08:59,040
I'll just replace the entire patch panel

264
00:08:59,040 --> 00:09:01,980
because that entire thing is only 50 or $100

265
00:09:01,980 --> 00:09:03,209
instead of having to replace a switch

266
00:09:03,209 --> 00:09:07,140
that might be 5,000 or 10,000 or $20,000

267
00:09:07,140 --> 00:09:09,995
depending on the size and scale of my networking equipment.

268
00:09:09,995 --> 00:09:12,030
Now, in addition to copper patch panels,

269
00:09:12,030 --> 00:09:13,740
which rely on these punchdown blocks,

270
00:09:13,740 --> 00:09:16,239
there's another type of patch panel that we use for fiber,

271
00:09:16,239 --> 00:09:18,891
and these are known as fiber distribution panels.

272
00:09:18,891 --> 00:09:20,940
Now, unlike a copper patch panel,

273
00:09:20,940 --> 00:09:23,157
there's no punchdown on the backside of them.

274
00:09:23,157 --> 00:09:25,403
Instead, these fiber distribution panels

275
00:09:25,403 --> 00:09:30,403
use fiber connectors like SC, LC, ST, and MTRJ

276
00:09:30,600 --> 00:09:32,130
to make their connections.

277
00:09:32,130 --> 00:09:33,210
Both the front and back

278
00:09:33,210 --> 00:09:34,418
of the fiber distribution panel

279
00:09:34,418 --> 00:09:36,601
will usually have the same type of fiber connections

280
00:09:36,601 --> 00:09:38,520
so that the fiber distribution panel

281
00:09:38,520 --> 00:09:41,160
is essentially just a coupler from one fiber cable

282
00:09:41,160 --> 00:09:42,559
being connected on the backside of the panel

283
00:09:42,559 --> 00:09:44,640
to the other fiber cable that's attached

284
00:09:44,640 --> 00:09:46,260
to the front side of the panel.

285
00:09:46,260 --> 00:09:48,397
Then the front side of the fiber distribution panel

286
00:09:48,397 --> 00:09:51,240
has that fiber patch cable that will connect directly

287
00:09:51,240 --> 00:09:53,398
to the switch port on your router or switch.

288
00:09:53,398 --> 00:09:54,954
These fiber distribution panels

289
00:09:54,954 --> 00:09:56,910
can also act as a converter for you

290
00:09:56,910 --> 00:09:58,410
if you need to convert one type

291
00:09:58,410 --> 00:10:00,240
of fiber connection to another.

292
00:10:00,240 --> 00:10:03,053
For example, you might have an SC connector on the backside

293
00:10:03,053 --> 00:10:05,520
and an ST or MTRJ located

294
00:10:05,520 --> 00:10:08,340
on the front side of that fiber distribution panel,

295
00:10:08,340 --> 00:10:09,846
and it will do the conversion for you.

296
00:10:09,846 --> 00:10:11,820
All right, now that we've defined

297
00:10:11,820 --> 00:10:12,791
all the different components,

298
00:10:12,791 --> 00:10:15,630
let's take a quick look at how all this works together

299
00:10:15,630 --> 00:10:17,310
by considering what the cable distribution

300
00:10:17,310 --> 00:10:19,500
from a switch in an intermediate distribution frame

301
00:10:19,500 --> 00:10:21,630
will look like as it moves out to the desktop

302
00:10:21,630 --> 00:10:23,430
of one of our end users.

303
00:10:23,430 --> 00:10:24,617
Now this is important to understand

304
00:10:24,617 --> 00:10:26,610
because when you go to your office tomorrow

305
00:10:26,610 --> 00:10:27,780
and you plug in a new computer

306
00:10:27,780 --> 00:10:29,574
into the wall jack of that network connection,

307
00:10:29,574 --> 00:10:32,046
there's actually a lot that's happening behind the scenes

308
00:10:32,046 --> 00:10:35,850
that the end user is simply never going to see or understand.

309
00:10:35,850 --> 00:10:38,040
So the computer is first going to be connected

310
00:10:38,040 --> 00:10:41,070
to the wall jack using a straight-through patch cable.

311
00:10:41,070 --> 00:10:42,480
This can be a copper patch cable

312
00:10:42,480 --> 00:10:44,400
if you're using something like Cat6A,

313
00:10:44,400 --> 00:10:46,020
or it can be a fiber patch cable

314
00:10:46,020 --> 00:10:48,601
if you're using a fiber-based cable distribution plant.

315
00:10:48,601 --> 00:10:51,630
The wall jack or wall outlet will have a connector on it

316
00:10:51,630 --> 00:10:53,370
like an RJ-45 connector

317
00:10:53,370 --> 00:10:55,260
if you're using copper network cabling.

318
00:10:55,260 --> 00:10:56,550
And on the back of this jack,

319
00:10:56,550 --> 00:10:58,890
there's a punchdown block that terminates the copper cable

320
00:10:58,890 --> 00:11:00,928
and then runs that cable through the walls

321
00:11:00,928 --> 00:11:03,900
up into the ceiling or down into the raised floor,

322
00:11:03,900 --> 00:11:05,370
and then across the cable trays

323
00:11:05,370 --> 00:11:08,340
until it reaches the intermediate distribution frame.

324
00:11:08,340 --> 00:11:10,470
From here, that cable is going to be terminated

325
00:11:10,470 --> 00:11:13,470
into a punchdown block on the back of a patch panel,

326
00:11:13,470 --> 00:11:15,900
and then we're going to use another patch cable

327
00:11:15,900 --> 00:11:17,430
to connect it from the patch panel

328
00:11:17,430 --> 00:11:19,320
to an open port on the edge switch

329
00:11:19,320 --> 00:11:22,126
located inside this intermediate distribution frame.

330
00:11:22,126 --> 00:11:24,750
Now, if I wanted to use fiber instead of copper here,

331
00:11:24,750 --> 00:11:25,920
I certainly could.

332
00:11:25,920 --> 00:11:28,110
We would just replace the switch with a fiber switch,

333
00:11:28,110 --> 00:11:30,240
the patch panel with a fiber distribution panel

334
00:11:30,240 --> 00:11:32,670
and the wall jack with a fiber wall jack.

335
00:11:32,670 --> 00:11:33,990
In either of these cases though,

336
00:11:33,990 --> 00:11:36,200
what we're really doing is taking one long cable

337
00:11:36,200 --> 00:11:37,650
that would otherwise have to go

338
00:11:37,650 --> 00:11:39,935
from the end user's desktop all the way to the switch,

339
00:11:39,935 --> 00:11:42,649
and instead we're breaking it up into multiple pieces

340
00:11:42,649 --> 00:11:44,460
so we have additional flexibility

341
00:11:44,460 --> 00:11:46,575
if we need to move it or repair it later on.

342
00:11:46,575 --> 00:11:48,987
For example, if the cable between the switch

343
00:11:48,987 --> 00:11:50,520
and the patch panel breaks,

344
00:11:50,520 --> 00:11:51,780
I could simply unplug it

345
00:11:51,780 --> 00:11:53,970
and replace it with another patch cable.

346
00:11:53,970 --> 00:11:55,251
If a cable between the wall jack

347
00:11:55,251 --> 00:11:56,874
and the patch panel gets broken,

348
00:11:56,874 --> 00:12:00,270
I can just replace that and then re-punch it down again.

349
00:12:00,270 --> 00:12:02,100
By having lots of places to troubleshoot

350
00:12:02,100 --> 00:12:03,062
or fix the cable at,

351
00:12:03,062 --> 00:12:04,359
it's going to give us more options

352
00:12:04,359 --> 00:12:06,606
to get that network up and running much faster

353
00:12:06,606 --> 00:12:07,650
and much more quickly

354
00:12:07,650 --> 00:12:09,633
than if we had to do an entire new cable run

355
00:12:09,633 --> 00:12:12,200
every time somebody had to move a machine to a new office

356
00:12:12,200 --> 00:12:14,172
where every time a cable got broken somewhere

357
00:12:14,172 --> 00:12:16,920
between the edge switch and the end user.

358
00:12:16,920 --> 00:12:19,230
So remember, your cable distribution system

359
00:12:19,230 --> 00:12:21,120
is made up of several different components,

360
00:12:21,120 --> 00:12:22,369
including the demarcation point,

361
00:12:22,369 --> 00:12:24,120
the main distribution frame,

362
00:12:24,120 --> 00:12:25,770
the intermediate distribution frame,

363
00:12:25,770 --> 00:12:27,252
the racks, the patch panel,

364
00:12:27,252 --> 00:12:29,255
and the fiber distribution panel.

365
00:12:29,255 --> 00:12:31,890
These different components are going to make it easier for us

366
00:12:31,890 --> 00:12:32,880
to support and maintain

367
00:12:32,880 --> 00:12:34,710
our network's cable distribution system

368
00:12:34,710 --> 00:12:37,893
in a more hierarchal and organized manner for the long term.

