1
00:00:00,210 --> 00:00:01,920
In this video, I want to show you how

2
00:00:01,920 --> 00:00:03,210
to test the network.

3
00:00:03,210 --> 00:00:05,850
Now, when we created a cable, I showed you this device,

4
00:00:05,850 --> 00:00:07,770
which is known as a cable tester.

5
00:00:07,770 --> 00:00:10,391
In this video though, I want to show you a little bit

6
00:00:10,391 --> 00:00:12,660
of an extension on a cable tester known

7
00:00:12,660 --> 00:00:14,250
as a fox and a hound.

8
00:00:14,250 --> 00:00:15,300
So I'm going to get rid of this one

9
00:00:15,300 --> 00:00:16,920
for us 'cause we don't need that.

10
00:00:16,920 --> 00:00:19,590
And instead we're going to focus on this device right here.

11
00:00:19,590 --> 00:00:21,240
Now, like the cable tester I showed you

12
00:00:21,240 --> 00:00:24,510
before, you can actually pull this apart into two pieces.

13
00:00:24,510 --> 00:00:26,490
So in this case, I'm just going to slide it apart.

14
00:00:26,490 --> 00:00:28,590
And you see I now have two pieces.

15
00:00:28,590 --> 00:00:31,230
Now the good thing about this is it does have a cable tester

16
00:00:31,230 --> 00:00:33,720
built in, and you can see that down here at the bottom

17
00:00:33,720 --> 00:00:35,730
where it'll test pins one through eight.

18
00:00:35,730 --> 00:00:38,310
And over here we can test pins one through eight.

19
00:00:38,310 --> 00:00:40,170
So if I want to use that functionality,

20
00:00:40,170 --> 00:00:42,180
I'll simply take a patch cable

21
00:00:42,180 --> 00:00:43,380
and I would be able to plug it in

22
00:00:43,380 --> 00:00:45,993
to both sides just like this.

23
00:00:47,010 --> 00:00:50,130
And then we'll be able to run it by doing a test.

24
00:00:50,130 --> 00:00:51,810
And you can see here the lights are lighting up

25
00:00:51,810 --> 00:00:55,110
as they're changing 1, 2, 3, 4, 5, 6, 7, 8,

26
00:00:55,110 --> 00:00:58,650
and continue to go through it over and over and over again.

27
00:00:58,650 --> 00:01:01,320
But that's not the special thing about a fox and a hound.

28
00:01:01,320 --> 00:01:04,200
Really, it comes down to this piece right here,

29
00:01:04,200 --> 00:01:05,910
which is called a probe.

30
00:01:05,910 --> 00:01:08,880
A fox and a hound is also known as a toner probe.

31
00:01:08,880 --> 00:01:10,680
Now when you're dealing with a toner probe,

32
00:01:10,680 --> 00:01:13,620
what it allows you to do is plug in one end

33
00:01:13,620 --> 00:01:14,730
to a network jack,

34
00:01:14,730 --> 00:01:16,830
and then use this metal tip

35
00:01:16,830 --> 00:01:19,530
to touch cables along your distribution path

36
00:01:19,530 --> 00:01:21,420
or your patch panel or your switch,

37
00:01:21,420 --> 00:01:24,960
and it will make a noise when it finds the right cable.

38
00:01:24,960 --> 00:01:26,550
Now let me show you how this works

39
00:01:26,550 --> 00:01:28,260
and it'll make a lot more sense.

40
00:01:28,260 --> 00:01:30,030
First, I'm going to show you here in my studio

41
00:01:30,030 --> 00:01:32,730
and then we're going to go and do it on my live network.

42
00:01:32,730 --> 00:01:35,610
So what we're going to do is I'm going to take this patch cable

43
00:01:35,610 --> 00:01:38,100
and I'm going to connect this sender

44
00:01:38,100 --> 00:01:40,710
that's going to send the noise and I'm going to plug it in.

45
00:01:40,710 --> 00:01:42,180
Now, once I plug that in, I need

46
00:01:42,180 --> 00:01:43,710
to plug this into a network somewhere.

47
00:01:43,710 --> 00:01:47,250
So I'm going to take our old fashioned jack that we used,

48
00:01:47,250 --> 00:01:49,830
that we created, and I'm going to plug it in there.

49
00:01:49,830 --> 00:01:53,760
Now, once I do that, I'm going to have this set to scan.

50
00:01:53,760 --> 00:01:56,790
Now by setting this to scan, it's sending out a signal

51
00:01:56,790 --> 00:01:58,710
through this cable to the other end

52
00:01:58,710 --> 00:02:00,750
of this, wherever it connects to.

53
00:02:00,750 --> 00:02:02,460
Now we'll go ahead and put that down for a second.

54
00:02:02,460 --> 00:02:05,490
And as you can see, this cable really doesn't go anywhere.

55
00:02:05,490 --> 00:02:07,140
It's just going into my hand.

56
00:02:07,140 --> 00:02:08,949
But if I take this other device

57
00:02:09,810 --> 00:02:12,990
and I turn it on, you're going to be able to hear

58
00:02:12,990 --> 00:02:14,550
that little beeping noise, right?

59
00:02:14,550 --> 00:02:18,510
As I get closer to the cable, it gets louder.

60
00:02:18,510 --> 00:02:20,130
And that's the whole point of this.

61
00:02:20,130 --> 00:02:23,340
If I have a bundle of wires, I can touch that cable

62
00:02:23,340 --> 00:02:26,700
and know exactly which cable it is that I'm touching,

63
00:02:26,700 --> 00:02:30,090
and that tells me this is connected to that network jack.

64
00:02:30,090 --> 00:02:31,860
Why would you use a toner probe?

65
00:02:31,860 --> 00:02:33,510
Well, because a lot of networks you go

66
00:02:33,510 --> 00:02:36,270
and work in, they didn't do a good job of documenting it.

67
00:02:36,270 --> 00:02:39,180
They didn't label which room or which port it was.

68
00:02:39,180 --> 00:02:40,950
And by using this toner probe,

69
00:02:40,950 --> 00:02:44,640
I can figure out exactly which port is tied to which part

70
00:02:44,640 --> 00:02:46,770
of the patch panel by tracing it

71
00:02:46,770 --> 00:02:48,480
throughout all of the walls

72
00:02:48,480 --> 00:02:50,790
because in most places, the walls are drywalled

73
00:02:50,790 --> 00:02:52,890
and you're not going to be able to get to those cables.

74
00:02:52,890 --> 00:02:55,140
But by going through where the cables start

75
00:02:55,140 --> 00:02:58,230
and end the office jack and the patch panel,

76
00:02:58,230 --> 00:03:00,870
I can identify it and relabel the network.

77
00:03:00,870 --> 00:03:03,690
So what I'm going to do is I'm going to set up my scanner on

78
00:03:03,690 --> 00:03:05,160
and push that signal out from one

79
00:03:05,160 --> 00:03:06,930
of the network jacks in my office.

80
00:03:06,930 --> 00:03:08,460
And I'm going to go back to our patch panel

81
00:03:08,460 --> 00:03:12,120
and we're going to figure out exactly which port it's tied into

82
00:03:12,120 --> 00:03:12,990
because we're going to be able

83
00:03:12,990 --> 00:03:15,300
to use this toner probe to figure that out.

84
00:03:15,300 --> 00:03:16,740
I'm back in the server room now.

85
00:03:16,740 --> 00:03:18,557
I had my production assistant Jay run out

86
00:03:18,557 --> 00:03:21,090
and plug it into one of the ports in the office,

87
00:03:21,090 --> 00:03:22,290
and he hasn't even told me where.

88
00:03:22,290 --> 00:03:23,550
But we're going to figure it out

89
00:03:23,550 --> 00:03:25,890
because we're going to use our handy dandy toner probe.

90
00:03:25,890 --> 00:03:27,420
So what I'm going to do, I'm going to turn it on

91
00:03:27,420 --> 00:03:30,450
and as I go through, I'm just going to start on the patch panel

92
00:03:30,450 --> 00:03:32,100
and figure out where it is.

93
00:03:32,100 --> 00:03:36,300
So that one's not it, that one's not it.

94
00:03:36,300 --> 00:03:38,880
Number three, number four, number five.

95
00:03:38,880 --> 00:03:40,650
It's getting noisier.
(device ringing)

96
00:03:40,650 --> 00:03:42,390
I think it's number six.

97
00:03:42,390 --> 00:03:44,910
Number seven's a little less, eight less, nine less.

98
00:03:44,910 --> 00:03:46,170
And so you can see it went away.

99
00:03:46,170 --> 00:03:48,450
So obviously it's number six.

100
00:03:48,450 --> 00:03:50,340
So if I look up here at number six

101
00:03:50,340 --> 00:03:52,260
and I use my little flashlight, it tells me

102
00:03:52,260 --> 00:03:53,940
that is in the break room.

103
00:03:53,940 --> 00:03:55,140
So Jay had gone

104
00:03:55,140 --> 00:03:57,000
and unplugged apparently our wireless network

105
00:03:57,000 --> 00:03:59,070
in the break room and decided to plug that in.

106
00:03:59,070 --> 00:04:00,840
And that's great so now we know where it is.

107
00:04:00,840 --> 00:04:01,830
And so if people are going, "Hey,

108
00:04:01,830 --> 00:04:04,530
the wireless network's not working," we can figure out why,

109
00:04:04,530 --> 00:04:05,460
because maybe he went

110
00:04:05,460 --> 00:04:08,220
and cut the network wire someplace between here and there.

111
00:04:08,220 --> 00:04:09,900
We'd be able to figure that out as well.

112
00:04:09,900 --> 00:04:11,670
But we wouldn't be able to figure it out here

113
00:04:11,670 --> 00:04:13,350
because if there's a cut in between,

114
00:04:13,350 --> 00:04:14,910
we're going to have to backtrack.

115
00:04:14,910 --> 00:04:17,910
And so we can start looking what's before the patch panel.

116
00:04:17,910 --> 00:04:20,399
And in my case, we look up

117
00:04:20,399 --> 00:04:23,400
and there's actually going to be wires coming in the ceiling.

118
00:04:23,400 --> 00:04:25,710
So Jay, if you can move the camera over here,

119
00:04:25,710 --> 00:04:27,410
we're going to show these blue wires.

120
00:04:29,700 --> 00:04:31,080
All right, so you can see these blue wires.

121
00:04:31,080 --> 00:04:33,840
And again, so if I start out over here,

122
00:04:33,840 --> 00:04:35,160
these are actually cable TV.

123
00:04:35,160 --> 00:04:36,780
That's not where we're sending the signal,

124
00:04:36,780 --> 00:04:38,790
but I do hear a little bit of noise and that's

125
00:04:38,790 --> 00:04:42,270
because these blue wires behind it are our Cat 5 cables.

126
00:04:42,270 --> 00:04:44,247
And so if I go over here and put my thing in,

127
00:04:44,247 --> 00:04:46,050
the one I'm touching is not it,

128
00:04:46,050 --> 00:04:47,880
but as I go through, I can poke

129
00:04:47,880 --> 00:04:49,607
until I hit the right wire

130
00:04:49,607 --> 00:04:50,880
(device ringing)

131
00:04:50,880 --> 00:04:51,870
and I found it.

132
00:04:51,870 --> 00:04:55,170
So now I can take that particular wire

133
00:04:55,170 --> 00:04:57,330
and I know that it's getting a signal at least to there,

134
00:04:57,330 --> 00:05:00,480
and I can trace that wire down using my toner probe

135
00:05:00,480 --> 00:05:02,790
until I find where the break in the wire is.

136
00:05:02,790 --> 00:05:04,770
This is a way that you can troubleshoot your networks,

137
00:05:04,770 --> 00:05:08,040
and that's why using these toner probes is so important

138
00:05:08,040 --> 00:05:09,750
and a good understanding of these.

139
00:05:09,750 --> 00:05:11,970
On the exam, if you hear fox and hound

140
00:05:11,970 --> 00:05:14,190
or toner probe, think about using it

141
00:05:14,190 --> 00:05:15,840
on your cable distribution network

142
00:05:15,840 --> 00:05:17,550
to find breaks in the wire or

143
00:05:17,550 --> 00:05:19,803
to identify and document your network.

