1
00:00:00,090 --> 00:00:00,990
In this lesson,

2
00:00:00,990 --> 00:00:03,960
we're going to discuss IPv4 addressing.

3
00:00:03,960 --> 00:00:06,780
Now, IPv4, or Internet Protocol version 4,

4
00:00:06,780 --> 00:00:09,420
is extremely popular, and it's the most common type

5
00:00:09,420 --> 00:00:11,850
of IP addressing used in our networks.

6
00:00:11,850 --> 00:00:13,740
In fact, if you're like most people,

7
00:00:13,740 --> 00:00:16,470
you've probably seen an IPv4 address before.

8
00:00:16,470 --> 00:00:18,330
When you look at them, they're written as a series

9
00:00:18,330 --> 00:00:21,090
of four decimal numbers separated by dots.

10
00:00:21,090 --> 00:00:23,190
Some examples of an IPv4 address

11
00:00:23,190 --> 00:00:25,800
are things like 10.1.2.3

12
00:00:25,800 --> 00:00:30,330
or 172.21.243.67

13
00:00:30,330 --> 00:00:32,850
As you can see, each IPv4 address

14
00:00:32,850 --> 00:00:35,730
is made up of four different parts to form that address,

15
00:00:35,730 --> 00:00:38,730
and this is why we call it a dotted-decimal notation.

16
00:00:38,730 --> 00:00:39,690
When you're referring to each

17
00:00:39,690 --> 00:00:41,460
of those four parts individually though,

18
00:00:41,460 --> 00:00:43,080
we call these an octet

19
00:00:43,080 --> 00:00:45,510
because each of them is a decimal number that's being used

20
00:00:45,510 --> 00:00:48,540
to represent eight bits of a binary number.

21
00:00:48,540 --> 00:00:50,790
Now, since each octet uses a decimal number

22
00:00:50,790 --> 00:00:53,160
to represent an eight-bit binary number,

23
00:00:53,160 --> 00:00:57,870
each octet can be represented by value of 0 to 255

24
00:00:57,870 --> 00:01:01,350
in each of those four octets of an IPv4 address.

25
00:01:01,350 --> 00:01:03,390
Now, when all four octets are combined,

26
00:01:03,390 --> 00:01:06,330
we get four octets that contain eight bits each

27
00:01:06,330 --> 00:01:09,510
for a total of 32 bits of total addressable space

28
00:01:09,510 --> 00:01:12,000
when using an IPv4 address.

29
00:01:12,000 --> 00:01:14,790
Now, for example, let's say you have the IPv4 address

30
00:01:14,790 --> 00:01:18,810
of 192.168.1.4

31
00:01:18,810 --> 00:01:21,270
That is being written in dotted-decimal notation

32
00:01:21,270 --> 00:01:24,000
to make it easier for you and I as humans to read it,

33
00:01:24,000 --> 00:01:26,640
but to a computer, that actually isn't what it is.

34
00:01:26,640 --> 00:01:29,220
Instead, they understand this as binary,

35
00:01:29,220 --> 00:01:30,580
which is 11000000

36
00:01:33,148 --> 00:01:33,981
.10101000

37
00:01:36,687 --> 00:01:37,520
.00000001

38
00:01:40,455 --> 00:01:41,288
.00000100

39
00:01:44,550 --> 00:01:47,130
Now, as you can see, using the dotted-decimal notation

40
00:01:47,130 --> 00:01:50,310
is a lot easier for us to read out loud and for us to type,

41
00:01:50,310 --> 00:01:52,950
and so it's less prone for us experiencing human error

42
00:01:52,950 --> 00:01:54,060
when we enter those numbers

43
00:01:54,060 --> 00:01:55,800
into our network device configurations,

44
00:01:55,800 --> 00:01:57,450
and it's a lot easier to memorize

45
00:01:57,450 --> 00:02:00,060
the decimal version of this than the binary.

46
00:02:00,060 --> 00:02:02,640
Now, each IPv4 address is actually going to be created

47
00:02:02,640 --> 00:02:05,910
using two portions, which we refer to as the network portion

48
00:02:05,910 --> 00:02:08,370
and the host portion of the address.

49
00:02:08,370 --> 00:02:11,683
So when you get an IP address like 192.168.1.4,

50
00:02:13,413 --> 00:02:15,990
it's actually broken down into these two portions,

51
00:02:15,990 --> 00:02:17,940
the network and the host portion,

52
00:02:17,940 --> 00:02:21,900
by using a second 32-bit number known as a subnet mask.

53
00:02:21,900 --> 00:02:24,600
Now, when you look at a subnet mask in decimal form,

54
00:02:24,600 --> 00:02:27,420
it's going to look a lot like an IPv4 address,

55
00:02:27,420 --> 00:02:29,460
but if you look at it in binary form,

56
00:02:29,460 --> 00:02:31,410
you're going to see there's actually continuous strings

57
00:02:31,410 --> 00:02:33,090
of ones and zeros,

58
00:02:33,090 --> 00:02:35,220
with the ones identifying the network portion

59
00:02:35,220 --> 00:02:37,410
and the zeros identifying the host portion

60
00:02:37,410 --> 00:02:40,890
of that IPv4 address that it's going to be married up with.

61
00:02:40,890 --> 00:02:43,200
For example, let's say I have a subnet mask

62
00:02:43,200 --> 00:02:47,100
of 255.255.255.0

63
00:02:47,100 --> 00:02:49,980
Now, if we converted each of these octets into binary,

64
00:02:49,980 --> 00:02:53,373
we would actually get 11111111.

65
00:02:54,417 --> 00:02:55,250
11111111.

66
00:02:57,856 --> 00:02:58,689
11111111.

67
00:03:01,346 --> 00:03:04,590
00000000

68
00:03:04,590 --> 00:03:07,260
Notice we have three sets of eight ones

69
00:03:07,260 --> 00:03:10,500
and then one set of eight zeros in our binary form

70
00:03:10,500 --> 00:03:15,500
to represent the decimal equivalent of 255.255.255.0

71
00:03:16,170 --> 00:03:19,140
Now, when you look at that subnet mask, and you see a one

72
00:03:19,140 --> 00:03:21,360
in that binary representation of the subnet mask,

73
00:03:21,360 --> 00:03:25,020
this becomes the network portion of the IPv4 address.

74
00:03:25,020 --> 00:03:27,300
If you see a zero in the binary representation

75
00:03:27,300 --> 00:03:29,970
of the subnet mask, this becomes the host portion

76
00:03:29,970 --> 00:03:31,800
of the IPv4 address.

77
00:03:31,800 --> 00:03:35,580
So let's put this together by showing both the IPv4 address

78
00:03:35,580 --> 00:03:37,650
and its associated subnet mask.

79
00:03:37,650 --> 00:03:42,650
First, we have our IPv4 address of 192.168.1.4

80
00:03:43,170 --> 00:03:45,480
Next, we have our subnet mask underneath it

81
00:03:45,480 --> 00:03:49,290
of 255.255.255.0

82
00:03:49,290 --> 00:03:53,280
Now, anytime I see a 255 in my decimal representation,

83
00:03:53,280 --> 00:03:56,520
this is representing all ones if we converted it to binary,

84
00:03:56,520 --> 00:03:58,470
so it becomes part of that network portion

85
00:03:58,470 --> 00:04:00,150
of the IPv4 address.

86
00:04:00,150 --> 00:04:03,720
So in this case, the 192.168.1

87
00:04:03,720 --> 00:04:05,880
is our network portion of the address.

88
00:04:05,880 --> 00:04:07,710
Anytime I see an IPv4 address

89
00:04:07,710 --> 00:04:11,280
that starts with 192.168.1.something,

90
00:04:11,280 --> 00:04:12,780
this means that it's addressable

91
00:04:12,780 --> 00:04:15,600
as part of this local network because all those things

92
00:04:15,600 --> 00:04:18,060
are going to be part of this network portion.

93
00:04:18,060 --> 00:04:20,550
Now, everywhere I see those zeros in the subnet mask,

94
00:04:20,550 --> 00:04:22,410
this actually represents the host portion

95
00:04:22,410 --> 00:04:24,330
of the IPv4 address.

96
00:04:24,330 --> 00:04:27,450
In this case, that's the .4 portion of the address

97
00:04:27,450 --> 00:04:31,500
of 192.168.1.4 that we had before.

98
00:04:31,500 --> 00:04:34,620
And that .4 is going to represent this specific host,

99
00:04:34,620 --> 00:04:37,080
like a server, a desktop, a laptop,

100
00:04:37,080 --> 00:04:39,960
a tablet, a printer, or any other network device

101
00:04:39,960 --> 00:04:42,750
that was assigned this IPv4 address.

102
00:04:42,750 --> 00:04:47,750
So if I have an address like 192.168.1.50

103
00:04:47,910 --> 00:04:51,960
with a subnet 255.255.255.0,

104
00:04:51,960 --> 00:04:54,060
that device is on the same network

105
00:04:54,060 --> 00:04:57,480
as our 192.168.1.4 device,

106
00:04:57,480 --> 00:04:59,790
and they can communicate to each other using a switch,

107
00:04:59,790 --> 00:05:01,110
and we wouldn't even have to use a router

108
00:05:01,110 --> 00:05:02,940
because they're on the same network.

109
00:05:02,940 --> 00:05:05,310
This means our switch will transfer data back and forth

110
00:05:05,310 --> 00:05:08,370
between these two devices using just their MAC addresses,

111
00:05:08,370 --> 00:05:09,870
and we're not going to have to route traffic

112
00:05:09,870 --> 00:05:12,330
using a router between these two devices.

113
00:05:12,330 --> 00:05:17,330
Now, on the other hand, if I had a device like 172.16.0.100

114
00:05:17,490 --> 00:05:21,600
with a subnet mask of 255.255.255.0,

115
00:05:21,600 --> 00:05:24,420
this tells me that that device is on a different network,

116
00:05:24,420 --> 00:05:29,160
and specifically, it's on the 172.16.0.something network.

117
00:05:29,160 --> 00:05:31,020
So we're not going to be able to communicate

118
00:05:31,020 --> 00:05:35,070
with the original device at 192.168.1.4

119
00:05:35,070 --> 00:05:37,560
without leaving its network, routing the traffic

120
00:05:37,560 --> 00:05:41,550
to this new network of 172.16.0.something,

121
00:05:41,550 --> 00:05:43,530
and that way you have to do that using a router

122
00:05:43,530 --> 00:05:46,680
or a layer 3 switch to make that routing happen.

123
00:05:46,680 --> 00:05:48,600
Now, if this doesn't quite make sense yet,

124
00:05:48,600 --> 00:05:50,400
don't worry too much about it right now

125
00:05:50,400 --> 00:05:51,840
because we're going to dive much deeper

126
00:05:51,840 --> 00:05:54,780
into both subnetting and routing in their own lessons

127
00:05:54,780 --> 00:05:57,600
because we have barely scratched the surface so far.

128
00:05:57,600 --> 00:05:59,040
Now, the next thing we need to talk about

129
00:05:59,040 --> 00:06:01,830
is that it's important to realize that IPv4 addresses

130
00:06:01,830 --> 00:06:03,540
are going to be broken down into classes

131
00:06:03,540 --> 00:06:05,820
or groupings of ranges that can be used,

132
00:06:05,820 --> 00:06:09,090
and each class has its own default subnet mask.

133
00:06:09,090 --> 00:06:11,250
Each class is going to be identified by a letter,

134
00:06:11,250 --> 00:06:12,690
and there are five classes,

135
00:06:12,690 --> 00:06:17,250
class A, class B, class C, class D, and class E.

136
00:06:17,250 --> 00:06:18,300
To identify the class

137
00:06:18,300 --> 00:06:20,580
for a certain IPv4 address that you have,

138
00:06:20,580 --> 00:06:22,740
simply look at the first octet.

139
00:06:22,740 --> 00:06:24,450
A class A network's first octet

140
00:06:24,450 --> 00:06:27,540
will include a number between 1 and 127,

141
00:06:27,540 --> 00:06:32,400
and they're going to have a default subnet mask of 255.0.0.0

142
00:06:32,400 --> 00:06:34,590
This means that the network portion of the address

143
00:06:34,590 --> 00:06:37,680
is the first octet, and the second, third, and fourth octets

144
00:06:37,680 --> 00:06:39,840
will all make up the host portion.

145
00:06:39,840 --> 00:06:41,640
This allows a class A address

146
00:06:41,640 --> 00:06:46,200
to have up to 256 times 256 times 256 hosts

147
00:06:46,200 --> 00:06:47,400
on a single network,

148
00:06:47,400 --> 00:06:50,280
which means we have a total possible combination

149
00:06:50,280 --> 00:06:53,460
of 16.7 million IP addresses available

150
00:06:53,460 --> 00:06:58,260
for each one of our class A networks going from 1 to 127.

151
00:06:58,260 --> 00:07:00,150
A class B network's first octet

152
00:07:00,150 --> 00:07:03,540
is going to include a number between 128 and 191,

153
00:07:03,540 --> 00:07:08,460
and they have a default subnet mask of 255.255.0.0

154
00:07:08,460 --> 00:07:10,770
This means that the network portion of the address

155
00:07:10,770 --> 00:07:13,140
is made up of the first and second octets,

156
00:07:13,140 --> 00:07:15,360
and then the third and fourth octets will be reserved

157
00:07:15,360 --> 00:07:17,370
for that host portion of the address.

158
00:07:17,370 --> 00:07:19,080
This means that a class B network

159
00:07:19,080 --> 00:07:23,250
can have up to 256 times 256 hosts on a single network,

160
00:07:23,250 --> 00:07:28,020
which gives us 65,536 possible host IP addresses

161
00:07:28,020 --> 00:07:30,300
for each of our class B networks.

162
00:07:30,300 --> 00:07:32,340
Now, a class C network's first octet

163
00:07:32,340 --> 00:07:36,360
is going to include the number between 192 and 223,

164
00:07:36,360 --> 00:07:37,890
and these class C addresses

165
00:07:37,890 --> 00:07:39,480
are going to have a default subnet mask

166
00:07:39,480 --> 00:07:43,170
of 255.255.255.0

167
00:07:43,170 --> 00:07:45,180
This means that the network portion of the address

168
00:07:45,180 --> 00:07:47,580
is the first, second, and third octets,

169
00:07:47,580 --> 00:07:48,840
and then that fourth octet

170
00:07:48,840 --> 00:07:50,730
is going to make up your host portion.

171
00:07:50,730 --> 00:07:53,490
Because we only have a fourth octet for our host portion,

172
00:07:53,490 --> 00:07:55,800
this means a class C network will only be able to have

173
00:07:55,800 --> 00:08:00,540
up to 256 hosts or IP addresses on a single network.

174
00:08:00,540 --> 00:08:02,790
Now, a class D network's first octet

175
00:08:02,790 --> 00:08:06,990
is going to include the numbers between 224 and 239.

176
00:08:06,990 --> 00:08:08,130
Now, a class D address

177
00:08:08,130 --> 00:08:10,560
does not have a subnet mask assigned to them

178
00:08:10,560 --> 00:08:13,320
because these class D addresses are considered special,

179
00:08:13,320 --> 00:08:15,480
and they're reserved for something known as multicasting

180
00:08:15,480 --> 00:08:17,370
or multicast routing.

181
00:08:17,370 --> 00:08:20,220
Now, a multicast address is simply a logical identifier

182
00:08:20,220 --> 00:08:22,470
for a group of hosts in a computer network

183
00:08:22,470 --> 00:08:24,750
that are available to process datagrams or frames

184
00:08:24,750 --> 00:08:28,140
intended to be multicast for a designated network service.

185
00:08:28,140 --> 00:08:29,910
So the actual multicast address

186
00:08:29,910 --> 00:08:32,159
doesn't align to one specific host,

187
00:08:32,159 --> 00:08:34,919
but instead it refers to a group of hosts.

188
00:08:34,919 --> 00:08:36,900
Now, when you think about a multicast address,

189
00:08:36,900 --> 00:08:38,700
think about it like a group chat.

190
00:08:38,700 --> 00:08:39,870
You have a group chat name,

191
00:08:39,870 --> 00:08:41,820
in our case, a multicast address,

192
00:08:41,820 --> 00:08:43,890
and when you send a message to the group chat's name,

193
00:08:43,890 --> 00:08:46,740
all of the members of that group are going to get a copy of it.

194
00:08:46,740 --> 00:08:49,650
Well, the exact same thing happens in IPv4

195
00:08:49,650 --> 00:08:51,150
when you're using multicast,

196
00:08:51,150 --> 00:08:53,340
and that's what we use class D for.

197
00:08:53,340 --> 00:08:55,680
Now, the last class we have is known as class E,

198
00:08:55,680 --> 00:08:58,050
and class E's first octet is going to include a number

199
00:08:58,050 --> 00:09:00,990
between 240 and 255,

200
00:09:00,990 --> 00:09:02,640
and again, class E addresses

201
00:09:02,640 --> 00:09:04,860
do not have a subnet mask assigned to them

202
00:09:04,860 --> 00:09:06,270
because they are also special,

203
00:09:06,270 --> 00:09:08,610
and they're reserved for experimental purposes

204
00:09:08,610 --> 00:09:11,070
in terms of research and development only.

205
00:09:11,070 --> 00:09:12,690
This experimental range contains

206
00:09:12,690 --> 00:09:15,810
about 268 million IPv4 addresses

207
00:09:15,810 --> 00:09:18,990
that are reserved for what they call, quote, future use.

208
00:09:18,990 --> 00:09:21,090
Now, over the years, there have been a few proposals

209
00:09:21,090 --> 00:09:23,910
to reallocate these class E addresses for general use

210
00:09:23,910 --> 00:09:26,970
because we started running out of public IPv4 addresses

211
00:09:26,970 --> 00:09:30,780
over time inside of the class A, class B, and class C ranges

212
00:09:30,780 --> 00:09:32,850
because more and more devices have become connected

213
00:09:32,850 --> 00:09:34,560
to the internet over time.

214
00:09:34,560 --> 00:09:37,500
That said, to date, as of the time of me saying this,

215
00:09:37,500 --> 00:09:39,840
these class E addresses still remain allocated

216
00:09:39,840 --> 00:09:41,610
for experimental use only,

217
00:09:41,610 --> 00:09:44,190
and most IP implementations inside of our networks

218
00:09:44,190 --> 00:09:48,420
will consider any IP inside of the 240.0.0.0

219
00:09:48,420 --> 00:09:52,590
all the way up to 255.255.255.255 range

220
00:09:52,590 --> 00:09:54,600
to be considered invalid as the source

221
00:09:54,600 --> 00:09:56,850
or destination within your datagrams,

222
00:09:56,850 --> 00:09:59,040
and therefore, the datagram will be rejected

223
00:09:59,040 --> 00:10:00,840
by your destination system.

224
00:10:00,840 --> 00:10:03,270
For example, a Windows server or workstation

225
00:10:03,270 --> 00:10:05,610
will simply refuse to communicate with any device

226
00:10:05,610 --> 00:10:08,130
that's claiming it's in the class E address space

227
00:10:08,130 --> 00:10:10,380
because class E addresses should not be used

228
00:10:10,380 --> 00:10:12,870
in a production or workplace environment.

229
00:10:12,870 --> 00:10:14,370
All right, now that I've briefly discussed

230
00:10:14,370 --> 00:10:16,440
the concept of subnetting, I want to go ahead

231
00:10:16,440 --> 00:10:18,720
and point out that subnetting is just a process

232
00:10:18,720 --> 00:10:20,760
of taking a larger network portion

233
00:10:20,760 --> 00:10:23,670
and subdividing it down into smaller portions.

234
00:10:23,670 --> 00:10:26,100
Now, when it comes to subnetting and subnet masks,

235
00:10:26,100 --> 00:10:27,720
we have two different types.

236
00:10:27,720 --> 00:10:31,260
We have classful subnet masks and classless subnet masks.

237
00:10:31,260 --> 00:10:34,260
A classful subnet mask is one that uses the default

238
00:10:34,260 --> 00:10:36,570
with a particular IPv4 address.

239
00:10:36,570 --> 00:10:40,620
For example, if you have an address like 10.0.0.0,

240
00:10:40,620 --> 00:10:43,740
this is a class A address based on the first octet.

241
00:10:43,740 --> 00:10:46,470
So if we use a classful subnet mask with it,

242
00:10:46,470 --> 00:10:49,560
we're going to use 255.0.0.0,

243
00:10:49,560 --> 00:10:52,080
and this gives us 16.7 million hosts

244
00:10:52,080 --> 00:10:54,420
inside that single class A network.

245
00:10:54,420 --> 00:10:55,890
For a class B address,

246
00:10:55,890 --> 00:10:59,880
the default subnet mask is 255.255.0.0,

247
00:10:59,880 --> 00:11:03,090
and this gives us 65,536 hosts

248
00:11:03,090 --> 00:11:05,430
inside of the single class B network.

249
00:11:05,430 --> 00:11:07,920
For class C addresses, the default subnet mask

250
00:11:07,920 --> 00:11:11,550
is going to be 255.255.255.0,

251
00:11:11,550 --> 00:11:14,250
and this gives us up to 256 hosts

252
00:11:14,250 --> 00:11:16,320
in a single class C network.

253
00:11:16,320 --> 00:11:18,690
Now, unfortunately, these classful subnet masks

254
00:11:18,690 --> 00:11:20,100
often create network sizes

255
00:11:20,100 --> 00:11:22,290
that are way too big for us to use.

256
00:11:22,290 --> 00:11:24,120
For example, I probably don't need

257
00:11:24,120 --> 00:11:27,510
16.7 million host IP addresses for a home network,

258
00:11:27,510 --> 00:11:29,280
like a class A would provide me,

259
00:11:29,280 --> 00:11:33,990
nor do I need 65,536 hosts, like a class B provides.

260
00:11:33,990 --> 00:11:35,100
And to take it further,

261
00:11:35,100 --> 00:11:37,530
most of us also don't need 256 hosts,

262
00:11:37,530 --> 00:11:39,240
like a class C would provide.

263
00:11:39,240 --> 00:11:41,220
So instead, we might want to break down

264
00:11:41,220 --> 00:11:43,410
these larger networks into smaller portions

265
00:11:43,410 --> 00:11:46,050
using what's known as a classless subnet mask

266
00:11:46,050 --> 00:11:48,330
through a process known as subnetting.

267
00:11:48,330 --> 00:11:49,920
Now, a classless subnet mask

268
00:11:49,920 --> 00:11:51,720
is going to be used to borrow some of the host bits

269
00:11:51,720 --> 00:11:55,110
from an IPv4 address by reassigning them to a one

270
00:11:55,110 --> 00:11:57,960
in the binary representation of that subnet mask.

271
00:11:57,960 --> 00:11:59,700
And that way, we can increase

272
00:11:59,700 --> 00:12:00,840
the size of the network portion

273
00:12:00,840 --> 00:12:03,060
and decrease the size of the host portion

274
00:12:03,060 --> 00:12:05,280
for a given IPv4 address.

275
00:12:05,280 --> 00:12:07,680
For example, let's pretend I have an IP address

276
00:12:07,680 --> 00:12:11,070
of 192.168.1.0

277
00:12:11,070 --> 00:12:16,070
with a classful class C subnet mask of 255.255.255.0

278
00:12:16,470 --> 00:12:19,980
Now, this gives me 256 IPs for use in my network.

279
00:12:19,980 --> 00:12:23,340
But if I only need to use 64 IP addresses,

280
00:12:23,340 --> 00:12:25,920
I can instead borrow two bits from the host portion

281
00:12:25,920 --> 00:12:28,860
and assign them to the network portion of that subnet mask.

282
00:12:28,860 --> 00:12:33,390
And this gives me 255.255.255.192

283
00:12:33,390 --> 00:12:35,490
as my subnet mask instead.

284
00:12:35,490 --> 00:12:37,830
Now, since the default for a class C network

285
00:12:37,830 --> 00:12:41,190
is 255.255.255.0,

286
00:12:41,190 --> 00:12:42,510
and I'm choosing to use something else

287
00:12:42,510 --> 00:12:44,370
besides that as my subnet mask,

288
00:12:44,370 --> 00:12:47,700
I am now having a classless subnet mask.

289
00:12:47,700 --> 00:12:50,940
This process is known as classless inter-domain routing,

290
00:12:50,940 --> 00:12:54,390
or CIDR, and we usually abbreviate our IP addresses

291
00:12:54,390 --> 00:12:57,000
and subnet mask into one combined notation

292
00:12:57,000 --> 00:12:59,310
which we call CIDR notation,

293
00:12:59,310 --> 00:13:01,620
which we pronounce CIDR notation.

294
00:13:01,620 --> 00:13:06,030
For example, the IP address of 192.168.1.4

295
00:13:06,030 --> 00:13:10,560
with a subnet mask of 255.255.255.0

296
00:13:10,560 --> 00:13:15,560
could be abbreviated as 192.168.1.4/24

297
00:13:16,500 --> 00:13:18,630
if I'm writing it in CIDR notation.

298
00:13:18,630 --> 00:13:19,620
Now, you may be wondering,

299
00:13:19,620 --> 00:13:23,580
why did I put /24 to represent 255.255.255.0?

300
00:13:25,440 --> 00:13:27,900
Well, what we're really doing here is counting the number

301
00:13:27,900 --> 00:13:30,180
of binary digits that are listed as a one

302
00:13:30,180 --> 00:13:32,010
in the network portion of the address.

303
00:13:32,010 --> 00:13:36,090
So if we have 255.255.255.0,

304
00:13:36,090 --> 00:13:39,660
we actually have 24 ones followed by eight zeros,

305
00:13:39,660 --> 00:13:42,240
so we write this as a /24

306
00:13:42,240 --> 00:13:46,350
instead of having to write out 255.255.255.0

307
00:13:46,350 --> 00:13:50,010
This /24 is considered to be a classful subnet mask

308
00:13:50,010 --> 00:13:51,840
for any class c network.

309
00:13:51,840 --> 00:13:54,630
On the other hand, if I have the classless subnet mask

310
00:13:54,630 --> 00:13:58,440
of 255.255.255.192,

311
00:13:58,440 --> 00:14:02,417
I would write this IP address as 192.168.1.4/26

312
00:14:04,980 --> 00:14:07,410
Because, remember, we borrowed two host bits

313
00:14:07,410 --> 00:14:08,790
and changed them to ones,

314
00:14:08,790 --> 00:14:10,800
so they became part of the network bits.

315
00:14:10,800 --> 00:14:13,620
So now, instead of having 24 ones and eight zeros,

316
00:14:13,620 --> 00:14:16,380
I have 26 ones and only six zeros.

317
00:14:16,380 --> 00:14:19,680
This gives me a /26 class C subnet mask,

318
00:14:19,680 --> 00:14:21,090
which would be classless

319
00:14:21,090 --> 00:14:23,640
as a subnet mask for a class C network.

320
00:14:23,640 --> 00:14:25,650
Now, if you're using a class A subnet,

321
00:14:25,650 --> 00:14:27,120
it has to be considered classful

322
00:14:27,120 --> 00:14:29,490
if you have a /8 CIDR notation,

323
00:14:29,490 --> 00:14:33,150
which is a subnet mask of 255.0.0.0,

324
00:14:33,150 --> 00:14:35,130
to indicate that there are eight bits of ones

325
00:14:35,130 --> 00:14:38,070
and 24 bits of zeros in that subnet mask.

326
00:14:38,070 --> 00:14:40,710
For a class B subnet mask to be considered classful,

327
00:14:40,710 --> 00:14:43,440
it must have a CIDR notation of /16

328
00:14:43,440 --> 00:14:47,400
or a subnet mask of 255.255.0.0,

329
00:14:47,400 --> 00:14:49,590
which indicates that it has 16 bits of ones

330
00:14:49,590 --> 00:14:52,500
and 16 bits of zeros in that subnet mask.

331
00:14:52,500 --> 00:14:55,200
For a class C subnet masks to be considered classful,

332
00:14:55,200 --> 00:14:57,960
it must have a CIDR notation of /24

333
00:14:57,960 --> 00:15:02,160
or a subnet mask of 255.255.255.0

334
00:15:02,160 --> 00:15:04,020
to indicate that it has 24 bits of ones

335
00:15:04,020 --> 00:15:06,630
and eight bits of zeros in its subnet mask.

336
00:15:06,630 --> 00:15:09,300
So remember, IPv4 addresses are commonly used

337
00:15:09,300 --> 00:15:12,060
inside of our networks, and these IPv4 addresses

338
00:15:12,060 --> 00:15:15,450
are decimal representations of a 32-bit binary number

339
00:15:15,450 --> 00:15:17,910
that we would write out our IPv4 addresses in,

340
00:15:17,910 --> 00:15:19,560
our dotted-decimal notation,

341
00:15:19,560 --> 00:15:22,110
to represent each one of the four octets.

342
00:15:22,110 --> 00:15:24,390
These IPv4 addresses are further divided

343
00:15:24,390 --> 00:15:26,730
into network and host portions of the address

344
00:15:26,730 --> 00:15:28,470
based on their subnet masks.

345
00:15:28,470 --> 00:15:32,160
Remember that these IP addresses are classified into classes

346
00:15:32,160 --> 00:15:36,420
of class A, class B, class C, class D, and class E,

347
00:15:36,420 --> 00:15:38,850
depending on the first octet in their address,

348
00:15:38,850 --> 00:15:40,080
and then each of these classes

349
00:15:40,080 --> 00:15:42,390
has its own default subnet mask.

350
00:15:42,390 --> 00:15:44,310
When this default subnet mask is used,

351
00:15:44,310 --> 00:15:46,650
we call this a classful subnet mask.

352
00:15:46,650 --> 00:15:48,060
But if you use any subnet mask

353
00:15:48,060 --> 00:15:50,340
that is not the default for that specific class,

354
00:15:50,340 --> 00:15:53,043
we will call this a classless subnet mask instead.

