1
00:00:00,060 --> 00:00:01,650
In this lesson, we're going to discuss

2
00:00:01,650 --> 00:00:04,170
Internet Protocol version six addressing.

3
00:00:04,170 --> 00:00:05,220
Now, up until this point,

4
00:00:05,220 --> 00:00:07,530
we've really just talked about IP version four,

5
00:00:07,530 --> 00:00:08,940
including how to subnet it,

6
00:00:08,940 --> 00:00:11,100
but one of the problems we have with IPv4

7
00:00:11,100 --> 00:00:12,990
is its limited address space.

8
00:00:12,990 --> 00:00:16,110
Remember, an IPv4 address only has 32 bits

9
00:00:16,110 --> 00:00:17,340
of addressable space,

10
00:00:17,340 --> 00:00:20,250
which gives us about 4.3 billion addresses.

11
00:00:20,250 --> 00:00:22,680
Now, I know that sounds like a lot of IP addresses,

12
00:00:22,680 --> 00:00:24,348
but when you start taking out entire portions

13
00:00:24,348 --> 00:00:26,220
for things like APIPA addresses,

14
00:00:26,220 --> 00:00:28,230
the local host or loop back addresses,

15
00:00:28,230 --> 00:00:29,850
and the private IP addresses,

16
00:00:29,850 --> 00:00:31,590
and there's this huge amount of waste that happened

17
00:00:31,590 --> 00:00:33,960
before we started to have subnetting available to us,

18
00:00:33,960 --> 00:00:35,070
and so we started running out

19
00:00:35,070 --> 00:00:37,710
of network addresses in IP version four.

20
00:00:37,710 --> 00:00:41,010
This is known as address exhaustion, and it's a real thing.

21
00:00:41,010 --> 00:00:44,400
In fact, in November, 2019, RIPE NCC,

22
00:00:44,400 --> 00:00:46,470
which is the regional internet registry for Europe,

23
00:00:46,470 --> 00:00:48,690
West Asia and the former USSR,

24
00:00:48,690 --> 00:00:51,000
announced that they have exhausted its entire pool

25
00:00:51,000 --> 00:00:53,250
of IP version four addresses.

26
00:00:53,250 --> 00:00:54,630
Now, luckily for us though,

27
00:00:54,630 --> 00:00:57,420
the Internet Engineering Task Force, or IETF,

28
00:00:57,420 --> 00:00:59,280
had already started looking into the future,

29
00:00:59,280 --> 00:01:02,220
and they came up with the IPv6 standard all the way back

30
00:01:02,220 --> 00:01:05,099
in December of 1995 with an RFC

31
00:01:05,099 --> 00:01:07,800
that documented their vision for IPv6,

32
00:01:07,800 --> 00:01:12,060
which they termed IP Next Generation, or IP NG.

33
00:01:12,060 --> 00:01:14,970
You see, IP version six is actually a huge improvement

34
00:01:14,970 --> 00:01:16,980
over Internet Protocol version four

35
00:01:16,980 --> 00:01:19,350
in terms of the number of addresses available.

36
00:01:19,350 --> 00:01:21,900
This is because instead of using a 32-bit address,

37
00:01:21,900 --> 00:01:23,430
like we use in IPv4,

38
00:01:23,430 --> 00:01:27,750
we actually use a 128-bit address in IP version six.

39
00:01:27,750 --> 00:01:29,130
This gives us the possibility

40
00:01:29,130 --> 00:01:32,820
of 340 undecillion IP addresses,

41
00:01:32,820 --> 00:01:35,520
and that is enough IP addresses for every man, woman,

42
00:01:35,520 --> 00:01:37,170
and child on the planet,

43
00:01:37,170 --> 00:01:41,070
in fact, many, many IP addresses for each one of those.

44
00:01:41,070 --> 00:01:43,020
You may be asking, "What about version five?

45
00:01:43,020 --> 00:01:43,860
What happened to that?

46
00:01:43,860 --> 00:01:45,750
Why did we go from four to six?"

47
00:01:45,750 --> 00:01:47,220
Well, version five was created,

48
00:01:47,220 --> 00:01:48,600
but it was never fully accepted

49
00:01:48,600 --> 00:01:50,430
as an official protocol or standard,

50
00:01:50,430 --> 00:01:53,190
and therefore it never went into our production networks.

51
00:01:53,190 --> 00:01:55,980
Instead, a lot of the concepts from version five

52
00:01:55,980 --> 00:01:58,110
actually came forward into version six,

53
00:01:58,110 --> 00:01:59,910
because version five was just treated

54
00:01:59,910 --> 00:02:01,950
as an experimental protocol.

55
00:02:01,950 --> 00:02:04,500
So now that we understand that we're in version six,

56
00:02:04,500 --> 00:02:07,500
what are some of the benefits of IP version six?

57
00:02:07,500 --> 00:02:08,940
Well, one of the biggest benefits

58
00:02:08,940 --> 00:02:11,730
is that much larger address space that we just talked about

59
00:02:11,730 --> 00:02:14,040
because of the 128-bit addresses.

60
00:02:14,040 --> 00:02:16,620
In addition to that, IP version six also increases

61
00:02:16,620 --> 00:02:18,000
the efficiency of our network

62
00:02:18,000 --> 00:02:21,630
by removing IPv4's broadcast data flow type.

63
00:02:21,630 --> 00:02:24,030
IPv6 is also considered to be more secure,

64
00:02:24,030 --> 00:02:26,520
because there is no packet or datagram fragmentation

65
00:02:26,520 --> 00:02:27,810
within the standard.

66
00:02:27,810 --> 00:02:29,730
There are also no maximum transmission units

67
00:02:29,730 --> 00:02:31,470
for discovery within each session,

68
00:02:31,470 --> 00:02:33,930
unlike IPv4, which contained an MTU

69
00:02:33,930 --> 00:02:35,670
with a certain size for each packet,

70
00:02:35,670 --> 00:02:37,800
like 1500 bytes by default,

71
00:02:37,800 --> 00:02:41,190
or 9,000 bytes if you're using jumbo frames.

72
00:02:41,190 --> 00:02:43,170
In fact, back in IP version four,

73
00:02:43,170 --> 00:02:45,930
if you had a larger packet size like 2,000 bytes,

74
00:02:45,930 --> 00:02:48,270
but your MTU could only allow 1500 bytes,

75
00:02:48,270 --> 00:02:49,980
it would actually fragment those packets

76
00:02:49,980 --> 00:02:51,720
before sending them over the network.

77
00:02:51,720 --> 00:02:53,610
Then when it got to the other end,

78
00:02:53,610 --> 00:02:55,590
the destination would then reassemble them.

79
00:02:55,590 --> 00:02:57,900
The problem with this is it requires extra processing

80
00:02:57,900 --> 00:02:59,190
by that receiving end,

81
00:02:59,190 --> 00:03:00,960
and this actually slows down your network

82
00:03:00,960 --> 00:03:03,510
and becomes an extremely inefficient way to do things,

83
00:03:03,510 --> 00:03:04,980
especially in our modern networks,

84
00:03:04,980 --> 00:03:06,540
with our faster internet connections

85
00:03:06,540 --> 00:03:09,240
and our larger data sizes that we're trying to transfer.

86
00:03:09,240 --> 00:03:11,437
So IP version six just said,

87
00:03:11,437 --> 00:03:13,890
"No more fragmentation, it's gone."

88
00:03:13,890 --> 00:03:15,900
Another benefit of IP version six

89
00:03:15,900 --> 00:03:17,610
is that it has a simplified header.

90
00:03:17,610 --> 00:03:19,080
So instead of having 12 fields,

91
00:03:19,080 --> 00:03:20,760
like we had in IP version four,

92
00:03:20,760 --> 00:03:23,970
we only have five fields inside of IP version six,

93
00:03:23,970 --> 00:03:25,470
giving us this slimmed down header

94
00:03:25,470 --> 00:03:28,050
that's a lot more efficient to send over the network.

95
00:03:28,050 --> 00:03:29,251
So you may be wondering

96
00:03:29,251 --> 00:03:32,040
what does an IP version six header look like?

97
00:03:32,040 --> 00:03:33,480
Well, I'm going to show it to you here,

98
00:03:33,480 --> 00:03:35,460
but please realize you do not need

99
00:03:35,460 --> 00:03:37,050
to memorize this for the exam.

100
00:03:37,050 --> 00:03:38,520
This is just to show you the different fields

101
00:03:38,520 --> 00:03:40,710
that were in IPv4, which is on the top,

102
00:03:40,710 --> 00:03:42,810
versus IPv6, which is on the bottom,

103
00:03:42,810 --> 00:03:46,230
and you can see how much simpler IP version six really is.

104
00:03:46,230 --> 00:03:47,760
Alright, let's get back to some things

105
00:03:47,760 --> 00:03:49,740
that we need to understand for the exam.

106
00:03:49,740 --> 00:03:52,590
For example, what does an IP version six address

107
00:03:52,590 --> 00:03:53,850
even look like?

108
00:03:53,850 --> 00:03:56,850
Well, remember I said it's 128 binary digits

109
00:03:56,850 --> 00:03:58,200
or bits in length,

110
00:03:58,200 --> 00:04:00,990
so that means it will be a 128 ones or zeros

111
00:04:00,990 --> 00:04:02,970
if we wrote the whole thing out in binary,

112
00:04:02,970 --> 00:04:04,560
and that seems like a really bad idea,

113
00:04:04,560 --> 00:04:07,200
'cause there's a lot of chances for human error there.

114
00:04:07,200 --> 00:04:08,640
Now, what we could do is we could use

115
00:04:08,640 --> 00:04:11,460
a dotted decimal notation like we did in IPv4,

116
00:04:11,460 --> 00:04:12,360
but the problem with that

117
00:04:12,360 --> 00:04:14,550
is we'd still have a lot of octets to write out

118
00:04:14,550 --> 00:04:17,700
because we would need 16 octets instead of four octets

119
00:04:17,700 --> 00:04:21,870
to represent all 128 bits of an IP version six address.

120
00:04:21,870 --> 00:04:23,250
So to solve this,

121
00:04:23,250 --> 00:04:25,752
the Internet Engineering Task Force came up with a new idea

122
00:04:25,752 --> 00:04:29,670
and they decided we're going to use hexadecimal digits instead.

123
00:04:29,670 --> 00:04:32,190
You see, hexadecimal is base 16,

124
00:04:32,190 --> 00:04:33,330
and you may or not remember this

125
00:04:33,330 --> 00:04:35,640
back from your high school algebra classes,

126
00:04:35,640 --> 00:04:37,260
in hexadecimal notation,

127
00:04:37,260 --> 00:04:40,230
each hexadecimal digit is actually four bits,

128
00:04:40,230 --> 00:04:42,900
and this allows us to represent an IPv6 address

129
00:04:42,900 --> 00:04:45,330
by combining four hexadecimal digits together

130
00:04:45,330 --> 00:04:46,560
to make up a segment,

131
00:04:46,560 --> 00:04:48,930
and each segment gives us 16 bits,

132
00:04:48,930 --> 00:04:50,370
and then we add a colon.

133
00:04:50,370 --> 00:04:52,950
And we keep adding segments until we get to our total length

134
00:04:52,950 --> 00:04:56,340
of 128 bits being represented by eight segments

135
00:04:56,340 --> 00:04:58,380
of four hexadecimal digits each

136
00:04:58,380 --> 00:05:00,330
for a total of 32 digits,

137
00:05:00,330 --> 00:05:02,100
which is still pretty long,

138
00:05:02,100 --> 00:05:04,500
but it gives us that 128 bits that we needed

139
00:05:04,500 --> 00:05:07,230
by using 32 hexadecimal digits.

140
00:05:07,230 --> 00:05:10,410
Remember, a hexadecimal digit can represent anything

141
00:05:10,410 --> 00:05:13,620
from 0, one, two, three, four, five,

142
00:05:13,620 --> 00:05:15,870
six, seven, eight, nine,

143
00:05:15,870 --> 00:05:18,960
and then A, B, C, D, E and F

144
00:05:18,960 --> 00:05:21,510
to represent the numbers 10 through 15.

145
00:05:21,510 --> 00:05:24,270
So each single hexadecimal digit can be anything

146
00:05:24,270 --> 00:05:27,570
from zero to 15 in our decimal equivalent.

147
00:05:27,570 --> 00:05:31,530
Now, when we have 128 bits represented in an IPv6 address,

148
00:05:31,530 --> 00:05:34,800
it's going to be no more than 32 hexadecimal digits.

149
00:05:34,800 --> 00:05:36,210
Did you catch what I just said there?

150
00:05:36,210 --> 00:05:39,210
I said no more than 32 digits in length.

151
00:05:39,210 --> 00:05:41,490
Now, why wouldn't it just be 32 hexadecimal digits,

152
00:05:41,490 --> 00:05:43,770
because 32 times four bits each

153
00:05:43,770 --> 00:05:46,140
would give us 128 total bits?

154
00:05:46,140 --> 00:05:48,930
Well, this is because IP version six allows us

155
00:05:48,930 --> 00:05:50,580
to use a shorthand notation

156
00:05:50,580 --> 00:05:54,270
to simplify writing out these very long IPv6 addresses.

157
00:05:54,270 --> 00:05:55,620
Now, these rules for the shorthand

158
00:05:55,620 --> 00:05:56,730
are going to be really important,

159
00:05:56,730 --> 00:05:59,550
so I you study them and learn them for the exam,

160
00:05:59,550 --> 00:06:01,530
because you might get a question on them.

161
00:06:01,530 --> 00:06:03,810
Now, if you have four zeros for a segment,

162
00:06:03,810 --> 00:06:05,610
you can actually just put one zero down

163
00:06:05,610 --> 00:06:07,350
instead of all those leading zeros.

164
00:06:07,350 --> 00:06:08,610
They're going to get dropped.

165
00:06:08,610 --> 00:06:09,870
For example, let's pretend

166
00:06:09,870 --> 00:06:12,301
I have a really long IP version six address

167
00:06:12,301 --> 00:06:15,884
of 2018:0000:0000:0000:0000:0000:4815:54ae.

168
00:06:27,125 --> 00:06:30,128
Now, that's the 32 hexadecimal digits.

169
00:06:30,128 --> 00:06:31,860
Now, using the simple rule I just gave you,

170
00:06:31,860 --> 00:06:34,286
we can take away all the leading zeros

171
00:06:34,286 --> 00:06:36,068
and remove any series of zeros

172
00:06:36,068 --> 00:06:38,242
and replace them with a single zero.

173
00:06:38,242 --> 00:06:40,891
So this now gives me the shortened version

174
00:06:40,891 --> 00:06:43,224
of 2018:0:0:0:0:0:4815:54ae.

175
00:06:51,900 --> 00:06:54,570
Now, this does reduce my number of hexadecimal characters

176
00:06:54,570 --> 00:06:58,350
from the 32 I started with down to just 17 characters,

177
00:06:58,350 --> 00:07:00,240
so about half as long.

178
00:07:00,240 --> 00:07:01,410
Now, that's pretty good,

179
00:07:01,410 --> 00:07:03,120
but there's another rule that I can use

180
00:07:03,120 --> 00:07:05,220
in the world of IPv6 shorthand

181
00:07:05,220 --> 00:07:07,530
that can help me reduce this even further.

182
00:07:07,530 --> 00:07:10,320
Now, this rule says that if you have multiple segments

183
00:07:10,320 --> 00:07:11,670
that have just zeros

184
00:07:11,670 --> 00:07:14,070
and no other hexadecimal digits represented,

185
00:07:14,070 --> 00:07:17,100
you can summarize that by using a double colon.

186
00:07:17,100 --> 00:07:18,120
Now, this rule is special

187
00:07:18,120 --> 00:07:21,300
because you can only use this double colon thing one time

188
00:07:21,300 --> 00:07:22,830
inside your address.

189
00:07:22,830 --> 00:07:24,870
So, using the double colon rule,

190
00:07:24,870 --> 00:07:29,400
I can summarize all five sets of zeros into a double colon,

191
00:07:29,400 --> 00:07:33,210
and it will look like 2018::4815:54ae.

192
00:07:36,030 --> 00:07:37,200
Now, that is really good,

193
00:07:37,200 --> 00:07:41,010
because I went from 32 hexadecimal digits down to 17,

194
00:07:41,010 --> 00:07:44,820
and now I'm down all the way to 12 hexadecimal digits.

195
00:07:44,820 --> 00:07:46,170
You could see how using the shorthand

196
00:07:46,170 --> 00:07:48,150
is pretty darn helpful.

197
00:07:48,150 --> 00:07:51,840
So how can you recognize an IP version six address versus

198
00:07:51,840 --> 00:07:53,850
an IP version four address?

199
00:07:53,850 --> 00:07:55,170
Well, IP version four

200
00:07:55,170 --> 00:07:57,720
is always going to use dotted octet notation

201
00:07:57,720 --> 00:08:00,900
or dotted decimal notation in those four octets.

202
00:08:00,900 --> 00:08:03,360
So that means you're going to be looking for dots

203
00:08:03,360 --> 00:08:04,500
and not colons,

204
00:08:04,500 --> 00:08:07,230
and you're going to be looking for numbers from zero to 255,

205
00:08:07,230 --> 00:08:08,940
and there should be no letters in there,

206
00:08:08,940 --> 00:08:11,160
like A, B, C, D, E, or F,

207
00:08:11,160 --> 00:08:12,990
like you would see in hexadecimal.

208
00:08:12,990 --> 00:08:15,750
On the other hand, when you're looking at IP version six,

209
00:08:15,750 --> 00:08:18,000
you're going to be using hexadecimal digits,

210
00:08:18,000 --> 00:08:20,550
which includes numbers and the letters A through F,

211
00:08:20,550 --> 00:08:22,860
as well as colons to separate them

212
00:08:22,860 --> 00:08:25,110
into groups of four or less.

213
00:08:25,110 --> 00:08:26,610
Alright, to drive this point home,

214
00:08:26,610 --> 00:08:28,350
let's take a look at a sample question

215
00:08:28,350 --> 00:08:30,030
you may see on the exam.

216
00:08:30,030 --> 00:08:32,880
Which of the following is an IP version six address?

217
00:08:32,880 --> 00:08:34,440
Now, this is a fair question to ask,

218
00:08:34,440 --> 00:08:35,970
and you'll get a couple of options.

219
00:08:35,970 --> 00:08:38,400
For our use case, I'm just going to give you three.

220
00:08:38,400 --> 00:08:41,909
Option A, 192.168.1.1.

221
00:08:41,909 --> 00:08:46,910
Option B, 12:34:56:78:90:AB.

222
00:08:48,300 --> 00:08:53,220
Or 1234::5678:90AB.

223
00:08:54,288 --> 00:08:55,470
Now let's see,

224
00:08:55,470 --> 00:08:57,600
first, we can just knock out A, right,

225
00:08:57,600 --> 00:09:00,960
because A is clearly an IP version four address.

226
00:09:00,960 --> 00:09:03,660
We know that because it's got decimal numbers and dots

227
00:09:03,660 --> 00:09:05,940
and there are no colons and no letters.

228
00:09:05,940 --> 00:09:08,280
But the second two, B and C,

229
00:09:08,280 --> 00:09:11,730
both look like they could be an IP version six address.

230
00:09:11,730 --> 00:09:14,160
So how do we tell which one is and which one isn't?

231
00:09:14,160 --> 00:09:17,910
Well, the second one here is not an IP version six address.

232
00:09:17,910 --> 00:09:19,530
This is actually a MAC address,

233
00:09:19,530 --> 00:09:21,990
and the way you can remember this is that MAC addresses

234
00:09:21,990 --> 00:09:25,530
are always going to have 12 hexadecimal digits

235
00:09:25,530 --> 00:09:27,990
and they're always going to be separated by colons.

236
00:09:27,990 --> 00:09:30,060
Now, these 12 hexadecimal digits

237
00:09:30,060 --> 00:09:32,100
will be grouped in pairs of two.

238
00:09:32,100 --> 00:09:37,100
So for the second one, you see 12:34:56:78:90:AB,

239
00:09:39,450 --> 00:09:41,700
and that tells me that is a MAC address

240
00:09:41,700 --> 00:09:46,050
because it is six groupings of two separated by a colon.

241
00:09:46,050 --> 00:09:48,990
Now, the last one is an IP version six address,

242
00:09:48,990 --> 00:09:51,210
and one of the other things here that gives this away

243
00:09:51,210 --> 00:09:54,630
is not just the fact that we have some number of digits

244
00:09:54,630 --> 00:09:57,870
between zero and 32 that are hexadecimal,

245
00:09:57,870 --> 00:09:59,430
but we're also using colons

246
00:09:59,430 --> 00:10:01,920
and we're grouping things based on fours,

247
00:10:01,920 --> 00:10:03,990
and you're seeing a double colon there,

248
00:10:03,990 --> 00:10:06,930
which is used as that shorthand in IPv6.

249
00:10:06,930 --> 00:10:08,250
These are the clues you're looking for

250
00:10:08,250 --> 00:10:10,950
when trying to identify an IPv6 address.

251
00:10:10,950 --> 00:10:12,630
Make sure you're looking for hexadecimal,

252
00:10:12,630 --> 00:10:14,820
make sure you're looking for groups of four or less,

253
00:10:14,820 --> 00:10:16,620
and make sure you're looking for any double colons,

254
00:10:16,620 --> 00:10:18,900
because if you see that, it's a dead giveaway

255
00:10:18,900 --> 00:10:21,450
that this is an IP version six address.

256
00:10:21,450 --> 00:10:23,730
Alright, now that we've covered what the address looks like,

257
00:10:23,730 --> 00:10:25,920
let's talk about the different address types

258
00:10:25,920 --> 00:10:28,230
that you may come across with IP version six,

259
00:10:28,230 --> 00:10:29,640
and there's really three of them.

260
00:10:29,640 --> 00:10:32,497
These are unicast addresses, multicast addresses,

261
00:10:32,497 --> 00:10:34,200
and anycast addresses.

262
00:10:34,200 --> 00:10:36,900
Now, one of the interesting things about IP version six

263
00:10:36,900 --> 00:10:39,900
versus IP version four is that in IP version six

264
00:10:39,900 --> 00:10:42,660
you can actually assign a single interface on a client

265
00:10:42,660 --> 00:10:45,630
with multiple different IP version six addresses,

266
00:10:45,630 --> 00:10:47,370
and these assignments can be a mixture

267
00:10:47,370 --> 00:10:48,600
of the three different types,

268
00:10:48,600 --> 00:10:51,300
unicast, multicast, and anycast.

269
00:10:51,300 --> 00:10:53,430
So even if you only have one network interface card

270
00:10:53,430 --> 00:10:54,510
in your workstation,

271
00:10:54,510 --> 00:10:57,750
you can actually have multiple IP version six addresses,

272
00:10:57,750 --> 00:10:59,130
and you can have different types

273
00:10:59,130 --> 00:11:03,000
of IP version six addresses too assigned on that one card.

274
00:11:03,000 --> 00:11:05,160
Now, when we talk about a unicast address,

275
00:11:05,160 --> 00:11:08,490
unicast address are used to identify a single interface.

276
00:11:08,490 --> 00:11:11,340
These are broken down into globally-routed unicast addresses

277
00:11:11,340 --> 00:11:13,200
and link-local addresses.

278
00:11:13,200 --> 00:11:15,060
Now, a globally-routed unicast address

279
00:11:15,060 --> 00:11:17,610
is similar to what we had in IP version four

280
00:11:17,610 --> 00:11:21,360
when we talked about unicast class A, B, and C addresses.

281
00:11:21,360 --> 00:11:22,830
In IP version six,

282
00:11:22,830 --> 00:11:24,750
a globally-routed unicast address

283
00:11:24,750 --> 00:11:29,750
will always begin with 2000, all the way up to 3999.

284
00:11:29,940 --> 00:11:31,110
This will be your first segment

285
00:11:31,110 --> 00:11:33,540
inside your IP version six address.

286
00:11:33,540 --> 00:11:36,510
For example, if you see the IP version six address

287
00:11:36,510 --> 00:11:41,510
of 2584:0db8:8583:1234:5678:882e:0370:7334,

288
00:11:52,290 --> 00:11:54,720
this is a globally-routed unicast address

289
00:11:54,720 --> 00:11:57,960
because that first segment, which was 2584,

290
00:11:57,960 --> 00:12:02,400
is between 2000 and 3999 when you're reading it

291
00:12:02,400 --> 00:12:04,200
as a hexadecimal number.

292
00:12:04,200 --> 00:12:05,640
Now, a link-local address,

293
00:12:05,640 --> 00:12:07,770
which is also known as a local use address,

294
00:12:07,770 --> 00:12:11,610
is very much like a private IP inside of IP version four.

295
00:12:11,610 --> 00:12:13,410
A link-local address can only be used

296
00:12:13,410 --> 00:12:14,790
on your local area network,

297
00:12:14,790 --> 00:12:18,480
and it will always have FE80 as its first segment

298
00:12:18,480 --> 00:12:20,610
in the IP version six address.

299
00:12:20,610 --> 00:12:23,550
Now, whenever an IP version six system starts up itself,

300
00:12:23,550 --> 00:12:26,040
it's automatically going to create a link-local address

301
00:12:26,040 --> 00:12:29,190
for each IP version six interface on that system,

302
00:12:29,190 --> 00:12:30,780
even if a globally-routable address

303
00:12:30,780 --> 00:12:32,850
was already manually configured or obtained

304
00:12:32,850 --> 00:12:36,060
through a configuration protocol like DHCP.

305
00:12:36,060 --> 00:12:37,821
Now, to do this, it's going to use something known

306
00:12:37,821 --> 00:12:42,821
as a Stateless Address Autoconfiguration, or SLAAC.

307
00:12:42,870 --> 00:12:44,670
With stateless auto configuration,

308
00:12:44,670 --> 00:12:46,230
The host doesn't need to obtain addresses

309
00:12:46,230 --> 00:12:47,760
or other configuration information

310
00:12:47,760 --> 00:12:49,260
from a centralized server,

311
00:12:49,260 --> 00:12:51,720
and instead it can independently assign itself

312
00:12:51,720 --> 00:12:53,160
a link-local address,

313
00:12:53,160 --> 00:12:55,560
test the uniqueness of that link-local address,

314
00:12:55,560 --> 00:12:57,600
assign the link-local address to itself,

315
00:12:57,600 --> 00:12:58,650
contact the router,

316
00:12:58,650 --> 00:12:59,970
provide direction to the node

317
00:12:59,970 --> 00:13:02,010
on how to proceed with auto configuration,

318
00:13:02,010 --> 00:13:04,050
and even configure the global unicast address

319
00:13:04,050 --> 00:13:05,610
that it wants to use.

320
00:13:05,610 --> 00:13:07,890
We're going to come back to this concept in just a few minutes

321
00:13:07,890 --> 00:13:11,206
as we dive a bit deeper as we talk about EUI-64

322
00:13:11,206 --> 00:13:13,320
and the Neighbor Discovery Protocol,

323
00:13:13,320 --> 00:13:14,670
because both of these processes

324
00:13:14,670 --> 00:13:16,380
are going to be used with SLAAC,

325
00:13:16,380 --> 00:13:19,440
the Stateless Address Autoconfiguration Protocol.

326
00:13:19,440 --> 00:13:20,760
The next type of address we have

327
00:13:20,760 --> 00:13:22,980
is what's known as a multicast address.

328
00:13:22,980 --> 00:13:25,110
Now, multicast addresses are used to identify

329
00:13:25,110 --> 00:13:27,480
a group of interfaces so that a packet can be sent

330
00:13:27,480 --> 00:13:28,680
to a multicast address

331
00:13:28,680 --> 00:13:29,513
and then be delivered

332
00:13:29,513 --> 00:13:31,830
to all the interfaces inside of the group.

333
00:13:31,830 --> 00:13:34,170
In IP version six, a multicast address

334
00:13:34,170 --> 00:13:36,810
will always contain FF as the first two digits

335
00:13:36,810 --> 00:13:38,130
within the first segment.

336
00:13:38,130 --> 00:13:40,110
So if you see FF at the beginning

337
00:13:40,110 --> 00:13:41,730
of an IP version six address,

338
00:13:41,730 --> 00:13:44,490
remember, this is a multicast address.

339
00:13:44,490 --> 00:13:45,720
The final type we have

340
00:13:45,720 --> 00:13:48,030
is what's known as an anycast address.

341
00:13:48,030 --> 00:13:51,180
Anycast addresses are used to identify a set of interfaces

342
00:13:51,180 --> 00:13:54,030
so that a packet can be sent to any member of a set.

343
00:13:54,030 --> 00:13:55,950
We're going to talk more about how an anycast works

344
00:13:55,950 --> 00:13:59,370
as we cover IP version six data flows in a separate lesson,

345
00:13:59,370 --> 00:14:01,530
but anycast addresses are actually allocated

346
00:14:01,530 --> 00:14:03,450
from the unicast address space,

347
00:14:03,450 --> 00:14:04,770
so there's really no way to determine

348
00:14:04,770 --> 00:14:07,710
if an IP version six is unicast or anycast

349
00:14:07,710 --> 00:14:11,040
just by looking at the IP version six address on it.

350
00:14:11,040 --> 00:14:13,200
Alright, now let's go back and talk a little bit more about

351
00:14:13,200 --> 00:14:16,680
the Stateless Address Autoconfiguration, or SLAAC process.

352
00:14:16,680 --> 00:14:17,820
In IP version six,

353
00:14:17,820 --> 00:14:20,370
there's an autoconfiguration process known as SLAAC

354
00:14:20,370 --> 00:14:21,870
that's use to discover the current network

355
00:14:21,870 --> 00:14:23,460
that an interface is located on,

356
00:14:23,460 --> 00:14:26,400
and select its own host ID based on its MAC address

357
00:14:26,400 --> 00:14:29,190
using the EUI-64 process.

358
00:14:29,190 --> 00:14:32,460
This EUI, or Extended Unique Identifier process,

359
00:14:32,460 --> 00:14:33,900
will allow a host to assign itself

360
00:14:33,900 --> 00:14:37,800
a unique 64-bit IP version six interface identifier called

361
00:14:37,800 --> 00:14:40,650
an EUI-64.

362
00:14:40,650 --> 00:14:44,760
Now, the IPv6 EUI-64 format is obtained using

363
00:14:44,760 --> 00:14:47,280
the interface's 48-bit MAC address.

364
00:14:47,280 --> 00:14:51,060
The MAC address is first separate into two 24-bit portions.

365
00:14:51,060 --> 00:14:53,910
The first half of the MAC address contains the OUI,

366
00:14:53,910 --> 00:14:56,550
or the Organizationally Unique Identifier,

367
00:14:56,550 --> 00:14:58,230
and the second one is going to contain

368
00:14:58,230 --> 00:15:00,780
the specific network interface card identifier.

369
00:15:00,780 --> 00:15:05,670
Then we're going to put a 16-bit hexadecimal value of FFFE

370
00:15:05,670 --> 00:15:08,430
that we're going to insert between these two 24-bits

371
00:15:08,430 --> 00:15:11,580
to create the 64-bit EUI address.

372
00:15:11,580 --> 00:15:13,920
Now, this gives you the 64-bits that you would need

373
00:15:13,920 --> 00:15:16,080
to identify your interface on a network,

374
00:15:16,080 --> 00:15:18,720
and then the interface uses the auto discovery

375
00:15:18,720 --> 00:15:20,340
to determine the network that it's on

376
00:15:20,340 --> 00:15:23,400
and add the network portion of the IP version six address,

377
00:15:23,400 --> 00:15:25,320
which is the first 64 bits,

378
00:15:25,320 --> 00:15:27,960
to the front of this EUI-64 address

379
00:15:27,960 --> 00:15:30,090
that we just created from its own MAC address

380
00:15:30,090 --> 00:15:33,780
to create a unique unicast, globally-routable IPv6 address

381
00:15:33,780 --> 00:15:35,580
that it's going to be able to use.

382
00:15:35,580 --> 00:15:39,390
Now, DHCP can be used with IPv6 if you prefer,

383
00:15:39,390 --> 00:15:43,230
by using something known as the DHCPv6 protocol.

384
00:15:43,230 --> 00:15:44,063
This would allow you

385
00:15:44,063 --> 00:15:46,380
to have a DHCP server automatically assign things

386
00:15:46,380 --> 00:15:48,810
from a DHCP version six server,

387
00:15:48,810 --> 00:15:52,020
but since the autoconfiguration process with EUI-64

388
00:15:52,020 --> 00:15:54,930
is already built into the IPv6 protocol by default,

389
00:15:54,930 --> 00:15:57,810
you really don't need to use DHCP version six.

390
00:15:57,810 --> 00:16:00,840
If you do decide you want to use DHCP version six though,

391
00:16:00,840 --> 00:16:02,310
you can use this to assign

392
00:16:02,310 --> 00:16:05,100
what addresses each interface is going to get.

393
00:16:05,100 --> 00:16:07,320
As I said though, in IPv6,

394
00:16:07,320 --> 00:16:09,120
we're usually going to choose its own address

395
00:16:09,120 --> 00:16:11,130
based on its MAC address by default,

396
00:16:11,130 --> 00:16:13,500
and this uses something known as NDP,

397
00:16:13,500 --> 00:16:15,360
or the Neighbor Discovery Protocol,

398
00:16:15,360 --> 00:16:17,850
to learn more about the Layer 2 addresses on the network

399
00:16:17,850 --> 00:16:19,470
based on their MAC addresses,

400
00:16:19,470 --> 00:16:22,170
and then pick its own host ID based on that.

401
00:16:22,170 --> 00:16:25,230
So let's explore the Neighbor Discovery Protocol for a bit.

402
00:16:25,230 --> 00:16:26,550
The Neighbor Discovery Protocol

403
00:16:26,550 --> 00:16:28,320
is used to learn the Layer 2 addresses

404
00:16:28,320 --> 00:16:29,970
that are on a given network.

405
00:16:29,970 --> 00:16:32,460
NDP will perform router solicitation,

406
00:16:32,460 --> 00:16:35,160
router advertisement, neighbor solicitation,

407
00:16:35,160 --> 00:16:37,710
neighbor advertisement, and redirection.

408
00:16:37,710 --> 00:16:40,080
Router solicitation is when your client is going to send

409
00:16:40,080 --> 00:16:42,330
a message to locate the routers on its network,

410
00:16:42,330 --> 00:16:44,850
because it has to figure out what the default gateway is

411
00:16:44,850 --> 00:16:46,470
so it has a way to get out of your network

412
00:16:46,470 --> 00:16:47,880
and onto the internet.

413
00:16:47,880 --> 00:16:50,190
Routers can do advertisement over NDP as well,

414
00:16:50,190 --> 00:16:51,570
and say, "Hey, I'm a router.

415
00:16:51,570 --> 00:16:52,403
I'm over here.

416
00:16:52,403 --> 00:16:53,340
You can solicit me.

417
00:16:53,340 --> 00:16:55,080
I'm right here. Come to me."

418
00:16:55,080 --> 00:16:57,990
Neighbor solicitation is where your IPv6 starts going around

419
00:16:57,990 --> 00:17:00,720
and saying, "What other nodes are on this network?"

420
00:17:00,720 --> 00:17:02,640
This allows your interface to try to determine

421
00:17:02,640 --> 00:17:05,940
what link-layer addresses or Layer 2 addresses are out there

422
00:17:05,940 --> 00:17:08,940
so it can learn them and know how to talk to them directly.

423
00:17:08,940 --> 00:17:10,650
Neighbor advertisement is just like

424
00:17:10,650 --> 00:17:11,880
the router advertisement,

425
00:17:11,880 --> 00:17:13,230
but it happens with your neighbors.

426
00:17:13,230 --> 00:17:14,227
These are the other clients saying,

427
00:17:14,227 --> 00:17:15,569
"Hey, I'm over here.

428
00:17:15,569 --> 00:17:16,829
I'm a printer. I can do this."

429
00:17:16,829 --> 00:17:17,880
Or, "Hey, I'm over here.

430
00:17:17,880 --> 00:17:19,859
I'm a file server. I can do this for you."

431
00:17:19,859 --> 00:17:20,970
And that way, you know who's there

432
00:17:20,970 --> 00:17:22,589
and what they have to offer.

433
00:17:22,589 --> 00:17:24,240
Finally, we have redirection,

434
00:17:24,240 --> 00:17:26,099
and this is where the routers can inform the host

435
00:17:26,099 --> 00:17:27,810
of better first hop routers

436
00:17:27,810 --> 00:17:30,510
to increase the efficiency of your network over time.

437
00:17:30,510 --> 00:17:33,240
For example, if I'm sitting here in Orlando, Florida,

438
00:17:33,240 --> 00:17:36,120
and I think my best first hop router is going to be in New York

439
00:17:36,120 --> 00:17:37,620
to get over to California,

440
00:17:37,620 --> 00:17:40,140
that may not be the most efficient route for me to use.

441
00:17:40,140 --> 00:17:42,000
Instead, there could be another router sitting

442
00:17:42,000 --> 00:17:43,020
in Atlanta, Georgia,

443
00:17:43,020 --> 00:17:45,337
that might tell me it's a better first hop by saying,

444
00:17:45,337 --> 00:17:46,950
"Hey, I'm actually closer to you.

445
00:17:46,950 --> 00:17:48,030
You should talk to me.

446
00:17:48,030 --> 00:17:50,040
Don't go all the way to New York to get to California.

447
00:17:50,040 --> 00:17:51,750
Come to me first. I'll handle it for you.

448
00:17:51,750 --> 00:17:53,730
It's just a simple redirection."

449
00:17:53,730 --> 00:17:56,910
Now, for the exam, you don't need to know NDP in depth,

450
00:17:56,910 --> 00:17:59,010
but you should understand the concept of NDP

451
00:17:59,010 --> 00:18:00,990
and how it's used in IP version six,

452
00:18:00,990 --> 00:18:02,430
and how it takes a lot of the functions

453
00:18:02,430 --> 00:18:04,860
from Layer 2 and Layer 3 of the OSI model

454
00:18:04,860 --> 00:18:07,050
for router advertisement and neighbor discovery,

455
00:18:07,050 --> 00:18:09,090
and it handles all of those for you.

456
00:18:09,090 --> 00:18:10,620
Now, when it comes to the exam,

457
00:18:10,620 --> 00:18:12,450
I want you to remember a couple of key things

458
00:18:12,450 --> 00:18:14,310
for IP version six.

459
00:18:14,310 --> 00:18:18,720
First, IP version six has 128 bits of addressable space

460
00:18:18,720 --> 00:18:19,590
inside of it,

461
00:18:19,590 --> 00:18:23,490
as opposed to the 32 bits that we had in IP version four.

462
00:18:23,490 --> 00:18:26,520
Second, when you're dealing with IP version six,

463
00:18:26,520 --> 00:18:29,430
you can use a shorthand to shorten your addresses down,

464
00:18:29,430 --> 00:18:32,640
and that way you can take four zeros and make them one zero,

465
00:18:32,640 --> 00:18:33,900
or sets of zeros,

466
00:18:33,900 --> 00:18:36,690
and use a double colon to collapse those all down

467
00:18:36,690 --> 00:18:38,338
and make it shorter for you to write.

468
00:18:38,338 --> 00:18:41,700
Third, every time you're looking at an IPv6 address,

469
00:18:41,700 --> 00:18:44,070
you should remember that it's written in hexadecimal,

470
00:18:44,070 --> 00:18:45,510
not in decimal.

471
00:18:45,510 --> 00:18:48,000
This means you're going to have numbers zero through nine

472
00:18:48,000 --> 00:18:50,130
and letters A through F.

473
00:18:50,130 --> 00:18:51,630
And then the last thing I want you to remember

474
00:18:51,630 --> 00:18:55,200
is that we have three different types of IPv6 address types.

475
00:18:55,200 --> 00:18:57,990
These are unicast addresses, multicast addresses,

476
00:18:57,990 --> 00:18:59,463
and anycast addresses.

