1
00:00:00,540 --> 00:00:02,190
Routing fundamentals.

2
00:00:02,190 --> 00:00:05,610
All right, we still haven't left our local area network yet.

3
00:00:05,610 --> 00:00:07,080
Once we're ready to leave our network,

4
00:00:07,080 --> 00:00:08,160
this is where routers

5
00:00:08,160 --> 00:00:10,500
are really going to start coming into play.

6
00:00:10,500 --> 00:00:11,400
When we start talking about

7
00:00:11,400 --> 00:00:13,320
connecting to subnets within our network

8
00:00:13,320 --> 00:00:14,700
or connecting our internal network

9
00:00:14,700 --> 00:00:15,810
and an external network,

10
00:00:15,810 --> 00:00:17,670
we have to use a router.

11
00:00:17,670 --> 00:00:19,050
The first thing you must understand

12
00:00:19,050 --> 00:00:20,520
is the function of a router,

13
00:00:20,520 --> 00:00:22,320
which is to route traffic.

14
00:00:22,320 --> 00:00:23,640
Now, I know that sounds kind of silly,

15
00:00:23,640 --> 00:00:25,410
but essentially that's what it's going to do.

16
00:00:25,410 --> 00:00:27,960
It's going to forward the traffic in one direction or another

17
00:00:27,960 --> 00:00:29,070
between different subnets

18
00:00:29,070 --> 00:00:30,810
or between an internal and external network

19
00:00:30,810 --> 00:00:33,480
or between two different external networks.

20
00:00:33,480 --> 00:00:35,040
Each subnet or external network

21
00:00:35,040 --> 00:00:37,080
is going to be its own broadcast domain

22
00:00:37,080 --> 00:00:40,200
because routers are used to separate broadcast domains.

23
00:00:40,200 --> 00:00:42,300
Unlike switches, which are Layer 2 devices

24
00:00:42,300 --> 00:00:44,880
and therefore can only maintain one broadcast domain

25
00:00:44,880 --> 00:00:46,890
for everything that's connected to the switch,

26
00:00:46,890 --> 00:00:49,020
the routers are going to be Layer 3 devices,

27
00:00:49,020 --> 00:00:50,880
and they're used to separate and break apart

28
00:00:50,880 --> 00:00:53,220
those broadcast domains into smaller portions

29
00:00:53,220 --> 00:00:55,320
to provide additional efficiency and security

30
00:00:55,320 --> 00:00:56,490
to your networks.

31
00:00:56,490 --> 00:00:58,410
Now, before we go too far in this lesson,

32
00:00:58,410 --> 00:01:00,300
it's important to note that there's a difference

33
00:01:00,300 --> 00:01:02,670
between the real world and the exam.

34
00:01:02,670 --> 00:01:03,660
In the real world,

35
00:01:03,660 --> 00:01:06,510
you may often find yourself using a Layer 3 switch,

36
00:01:06,510 --> 00:01:08,700
also known as a multilayer switch.

37
00:01:08,700 --> 00:01:09,540
When you do this,

38
00:01:09,540 --> 00:01:11,850
it can perform routing functions for you.

39
00:01:11,850 --> 00:01:13,710
Many small-office, home-office networks

40
00:01:13,710 --> 00:01:15,480
or small and medium-sized businesses

41
00:01:15,480 --> 00:01:17,670
will often opt to use a Layer 3 switch

42
00:01:17,670 --> 00:01:19,560
because it can handle both functions.

43
00:01:19,560 --> 00:01:21,060
It can handle Layer 2 forwarding

44
00:01:21,060 --> 00:01:22,350
when it's acting like a switch

45
00:01:22,350 --> 00:01:25,200
and Layer 3 routing when it acts as a router.

46
00:01:25,200 --> 00:01:26,820
For the exam though, remember,

47
00:01:26,820 --> 00:01:28,830
if you're using a multilayer switch,

48
00:01:28,830 --> 00:01:30,720
it is functioning as a router,

49
00:01:30,720 --> 00:01:32,580
and so we're going to treat it as a router

50
00:01:32,580 --> 00:01:34,260
or a Layer 3 device.

51
00:01:34,260 --> 00:01:35,910
Now, in this entire section,

52
00:01:35,910 --> 00:01:38,460
we're going to be referring to these devices as a router,

53
00:01:38,460 --> 00:01:42,060
even if I'm using a multilayer switch in the real world.

54
00:01:42,060 --> 00:01:45,000
Now for the exam, if they say switch,

55
00:01:45,000 --> 00:01:47,430
they're talking about a standard Layer 2 switch.

56
00:01:47,430 --> 00:01:50,040
If they say multilayer switch or router,

57
00:01:50,040 --> 00:01:52,080
they're referring to Layer 3 functionality

58
00:01:52,080 --> 00:01:54,600
of a device that we call a router.

59
00:01:54,600 --> 00:01:58,230
So how does the basic router perform this work?

60
00:01:58,230 --> 00:02:00,240
Well, let's consider this diagram here.

61
00:02:00,240 --> 00:02:01,320
I have two networks,

62
00:02:01,320 --> 00:02:02,370
one on the left side

63
00:02:02,370 --> 00:02:04,140
and one on the right side of the screen.

64
00:02:04,140 --> 00:02:04,980
As you can see,

65
00:02:04,980 --> 00:02:07,020
PC1 is connected to our left network

66
00:02:07,020 --> 00:02:09,449
and PC2 is connected to our right network.

67
00:02:09,449 --> 00:02:11,550
Now, to connect these two networks together,

68
00:02:11,550 --> 00:02:13,890
we have two routers in a serial connection

69
00:02:13,890 --> 00:02:16,380
or wide area network connection between them.

70
00:02:16,380 --> 00:02:17,700
This could be a fiber connection,

71
00:02:17,700 --> 00:02:20,520
a serial connection, a satellite connection, a VPN,

72
00:02:20,520 --> 00:02:21,660
or any other kind of link.

73
00:02:21,660 --> 00:02:23,190
It really doesn't matter right now.

74
00:02:23,190 --> 00:02:24,120
As long as you understand

75
00:02:24,120 --> 00:02:26,580
that there is connectivity between these two routers

76
00:02:26,580 --> 00:02:27,870
and they can communicate to each other

77
00:02:27,870 --> 00:02:29,220
over that WAN connection,

78
00:02:29,220 --> 00:02:30,690
that's all we need to know.

79
00:02:30,690 --> 00:02:32,520
Now, if I'm sitting at PC1

80
00:02:32,520 --> 00:02:34,500
and I want to send a message to PC2,

81
00:02:34,500 --> 00:02:37,290
I can't just send it through ARP like I did with a switch.

82
00:02:37,290 --> 00:02:38,610
If you remember back in switching,

83
00:02:38,610 --> 00:02:40,320
we talked about how PC1

84
00:02:40,320 --> 00:02:41,697
would send an ARP packet to the switch,

85
00:02:41,697 --> 00:02:43,620
and if it didn't know where to deliver it,

86
00:02:43,620 --> 00:02:45,780
it would send it out every single switch port

87
00:02:45,780 --> 00:02:47,280
based on that MAC address.

88
00:02:47,280 --> 00:02:50,520
Well, PC1 can and will still do that.

89
00:02:50,520 --> 00:02:51,780
But what's going to happen here

90
00:02:51,780 --> 00:02:54,180
is that our ARP request is going to go up to the switch

91
00:02:54,180 --> 00:02:55,770
and the switch is going to realize

92
00:02:55,770 --> 00:02:57,090
that it doesn't know the MAC address

93
00:02:57,090 --> 00:02:58,620
associated with that request,

94
00:02:58,620 --> 00:03:01,530
so it's going to forward it out its default gateway.

95
00:03:01,530 --> 00:03:03,660
The default gateway is the router.

96
00:03:03,660 --> 00:03:06,480
Now, that router is then going to respond to the ARP request

97
00:03:06,480 --> 00:03:08,610
on behalf of the destination device.

98
00:03:08,610 --> 00:03:09,510
At this point,

99
00:03:09,510 --> 00:03:12,210
we're now going to have to leave MAC addresses behind

100
00:03:12,210 --> 00:03:15,390
because MAC addresses only work internally in our network.

101
00:03:15,390 --> 00:03:16,560
Once we get to the router,

102
00:03:16,560 --> 00:03:18,480
we're going to switch to using IP addresses,

103
00:03:18,480 --> 00:03:21,030
or logical addressing at Layer 3.

104
00:03:21,030 --> 00:03:22,170
This is where we begin to make

105
00:03:22,170 --> 00:03:24,690
our Layer 2 to Layer 3 transitions.

106
00:03:24,690 --> 00:03:27,330
At this point, PC1 has determined the MAC address

107
00:03:27,330 --> 00:03:28,500
for where the router is

108
00:03:28,500 --> 00:03:29,970
because it needs to send the packet

109
00:03:29,970 --> 00:03:31,710
to get out of this local area network

110
00:03:31,710 --> 00:03:34,470
and leave to go find this device.

111
00:03:34,470 --> 00:03:35,820
The left router in this case

112
00:03:35,820 --> 00:03:37,950
wants to send the information to PC2

113
00:03:37,950 --> 00:03:40,230
'cause that's what PC1 told it to do.

114
00:03:40,230 --> 00:03:41,063
To do that,

115
00:03:41,063 --> 00:03:42,900
it's going to pass the information over to Router 2,

116
00:03:42,900 --> 00:03:45,180
and then Router 1 is going to get the data frame,

117
00:03:45,180 --> 00:03:47,640
which is Layer 2, from PC1.

118
00:03:47,640 --> 00:03:50,010
The router will repackage it up as a packet,

119
00:03:50,010 --> 00:03:51,060
which is Layer 3,

120
00:03:51,060 --> 00:03:53,100
and then add an IP header to it.

121
00:03:53,100 --> 00:03:54,360
This allows Router 1

122
00:03:54,360 --> 00:03:56,880
to then push the data over its default connection

123
00:03:56,880 --> 00:03:58,200
as an IP packet,

124
00:03:58,200 --> 00:04:00,510
and the data will then be sent across the serial connection

125
00:04:00,510 --> 00:04:02,070
to get to Router 2.

126
00:04:02,070 --> 00:04:04,350
All right, once that packet gets to Router 2,

127
00:04:04,350 --> 00:04:06,420
Router 2 is going to strip off the IP header

128
00:04:06,420 --> 00:04:08,880
and bring it back down to Layer 2 data frames

129
00:04:08,880 --> 00:04:11,310
by adding a MAC address for PC2.

130
00:04:11,310 --> 00:04:14,010
This way it's going to correlate PC2's MAC address

131
00:04:14,010 --> 00:04:15,870
with the destination IP of the packet

132
00:04:15,870 --> 00:04:17,850
because Router 2 knows who PC2 is,

133
00:04:17,850 --> 00:04:19,230
it's on its network.

134
00:04:19,230 --> 00:04:22,290
Now, since Router 2 knows the MAC address for PC2,

135
00:04:22,290 --> 00:04:25,080
it can call it to PC2 directly over Layer 2

136
00:04:25,080 --> 00:04:27,330
and send that data frame through the switch.

137
00:04:27,330 --> 00:04:28,860
The switch is going to take that information

138
00:04:28,860 --> 00:04:31,770
and push it from Router 2 down to PC2,

139
00:04:31,770 --> 00:04:33,570
just as if the two of them were computers

140
00:04:33,570 --> 00:04:36,480
sitting on the same switch trying to communicate locally.

141
00:04:36,480 --> 00:04:39,090
When PC2 wants to send a response to PC1,

142
00:04:39,090 --> 00:04:41,130
this process is going to be reversed,

143
00:04:41,130 --> 00:04:43,710
and that way the communication can continue back and forth

144
00:04:43,710 --> 00:04:46,320
between PC1, its switch, Router 1,

145
00:04:46,320 --> 00:04:49,890
the WAN connection, Router 2, its switch, and PC2.

146
00:04:49,890 --> 00:04:51,240
All right, so a quick summary

147
00:04:51,240 --> 00:04:53,520
of what we just saw in terms of data flow.

148
00:04:53,520 --> 00:04:55,650
We started out with Layer 2 pieces of information

149
00:04:55,650 --> 00:04:58,260
called a data frame coming from PC1.

150
00:04:58,260 --> 00:04:59,460
When it got to Router 1,

151
00:04:59,460 --> 00:05:01,800
it got packaged up as a Layer 3 packet

152
00:05:01,800 --> 00:05:03,480
to cross the wide area network.

153
00:05:03,480 --> 00:05:04,800
When it got to Router 2,

154
00:05:04,800 --> 00:05:06,840
it stripped it back down to Layer 2

155
00:05:06,840 --> 00:05:08,250
to make it a data frame again,

156
00:05:08,250 --> 00:05:10,890
using MAC addresses to deliver it to PC2

157
00:05:10,890 --> 00:05:12,270
on its local network.

158
00:05:12,270 --> 00:05:14,580
Essentially, this is how routing works.

159
00:05:14,580 --> 00:05:16,500
Now at this point, it's pretty simple,

160
00:05:16,500 --> 00:05:18,450
but it's going to get a lot more complicated

161
00:05:18,450 --> 00:05:20,160
as we start to move packets across

162
00:05:20,160 --> 00:05:22,380
not just a direct WAN link like this one,

163
00:05:22,380 --> 00:05:24,810
but over the world's largest wide area network,

164
00:05:24,810 --> 00:05:25,643
the internet.

