1
00:00:00,300 --> 00:00:02,969
In this lesson, I'm going to show you DHCP

2
00:00:02,969 --> 00:00:04,740
and how it works behind the scenes

3
00:00:04,740 --> 00:00:07,440
by looking at the packet as they go across our network.

4
00:00:07,440 --> 00:00:09,060
Now, when we look at DHCP here,

5
00:00:09,060 --> 00:00:11,010
I'm going to do it in a very simplistic manner,

6
00:00:11,010 --> 00:00:13,050
and I'm going to use a small office home office

7
00:00:13,050 --> 00:00:15,150
wireless router or wireless gateway.

8
00:00:15,150 --> 00:00:17,850
You can see that here on the left side of the screen.

9
00:00:17,850 --> 00:00:19,530
All right, so let's go ahead and get started here.

10
00:00:19,530 --> 00:00:21,210
We have a wireless router at the top,

11
00:00:21,210 --> 00:00:24,330
and I've got two clients, PC0 and PC1.

12
00:00:24,330 --> 00:00:26,940
Right now, PC0 is statically assigned,

13
00:00:26,940 --> 00:00:29,340
and PC1 is dynamically assigned.

14
00:00:29,340 --> 00:00:30,810
You can see that if I click on them.

15
00:00:30,810 --> 00:00:32,009
Here's PC1.

16
00:00:32,009 --> 00:00:33,810
You can see it is set up for DHCP,

17
00:00:33,810 --> 00:00:37,590
and it's pulled an address of 182.168.0.1

18
00:00:37,590 --> 00:00:39,030
as it's default gateway.

19
00:00:39,030 --> 00:00:40,920
And if I look at its actual interface card,

20
00:00:40,920 --> 00:00:44,460
you could see its IP address over here at 192.168.0.101.

21
00:00:46,380 --> 00:00:49,500
Now, if I look at PC0, you're going to see on PC0

22
00:00:49,500 --> 00:00:51,720
that I have a statically assigned default gateway,

23
00:00:51,720 --> 00:00:53,820
and that gateway doesn't match the DHCP one,

24
00:00:53,820 --> 00:00:54,660
which is why I'm having some

25
00:00:54,660 --> 00:00:56,190
communication problems with this one.

26
00:00:56,190 --> 00:00:58,770
So I decided I'm just going to make my life easy

27
00:00:58,770 --> 00:01:00,360
and set up DHCP.

28
00:01:00,360 --> 00:01:02,460
So I'm going to click on DHCP,

29
00:01:02,460 --> 00:01:05,010
and it will automatically switch me to DHCP.

30
00:01:05,010 --> 00:01:08,250
Now, once I click on DHCP, I'm going to minimize this window,

31
00:01:08,250 --> 00:01:09,960
and that way we can see it as it steps through

32
00:01:09,960 --> 00:01:11,400
the DORA process.

33
00:01:11,400 --> 00:01:12,900
So the first packet that's going to go out

34
00:01:12,900 --> 00:01:16,200
is going to be a broadcast message for the discover process.

35
00:01:16,200 --> 00:01:17,820
Notice here the destination.

36
00:01:17,820 --> 00:01:22,820
It is 255.255.255.255, and this tells us that

37
00:01:23,070 --> 00:01:25,740
that is the broadcast for layer three.

38
00:01:25,740 --> 00:01:26,670
And so we're going to send this out,

39
00:01:26,670 --> 00:01:28,440
and everybody connected over layer three

40
00:01:28,440 --> 00:01:30,030
is going to get this message.

41
00:01:30,030 --> 00:01:31,590
In this case, the only other person

42
00:01:31,590 --> 00:01:34,620
that's connected over layer three is wireless router zero.

43
00:01:34,620 --> 00:01:36,150
So when I do this

44
00:01:36,150 --> 00:01:38,700
and I hit the next button, we're going to send that packet up.

45
00:01:38,700 --> 00:01:40,500
It gets to wireless router zero.

46
00:01:40,500 --> 00:01:43,070
When it gets there, it accepts that and it processes it.

47
00:01:43,070 --> 00:01:45,720
It says, "Oh, somebody on this network

48
00:01:45,720 --> 00:01:47,370
wants to get an IP address."

49
00:01:47,370 --> 00:01:49,080
So this was the discovery phase.

50
00:01:49,080 --> 00:01:51,690
Since this wireless router has a DHCP server,

51
00:01:51,690 --> 00:01:54,390
it's going to say, "Great, I can give you an IP address,

52
00:01:54,390 --> 00:01:55,740
and I'm going to offer you one."

53
00:01:55,740 --> 00:01:57,570
So it's going to send a packet back,

54
00:01:57,570 --> 00:01:58,890
and when it sends that packet,

55
00:01:58,890 --> 00:02:00,900
we are going to send that out as a broadcast,

56
00:02:00,900 --> 00:02:03,740
so it goes to both PC0 and PC1.

57
00:02:03,740 --> 00:02:07,200
In this case, PC0 accepted it and PC1 didn't.

58
00:02:07,200 --> 00:02:08,729
Why didn't PC1 accept it?

59
00:02:08,729 --> 00:02:10,139
Because it didn't ask for it,

60
00:02:10,139 --> 00:02:11,550
it didn't do the discover process.

61
00:02:11,550 --> 00:02:13,140
So it says, "This isn't meant for me,"

62
00:02:13,140 --> 00:02:14,850
and it simply drops that packet.

63
00:02:14,850 --> 00:02:15,683
Now, on the other hand,

64
00:02:15,683 --> 00:02:17,790
PC0 says, "I was looking for a message."

65
00:02:17,790 --> 00:02:19,740
And so this message came as a broadcast.

66
00:02:19,740 --> 00:02:22,470
You could see the destination there is listed as broadcast.

67
00:02:22,470 --> 00:02:24,510
Now, because this was sent as a broadcast message,

68
00:02:24,510 --> 00:02:26,850
it's coming over layer three at the broadcast.

69
00:02:26,850 --> 00:02:29,160
So again, you could see the destination IP address

70
00:02:29,160 --> 00:02:32,430
of 255.255.255.255,

71
00:02:32,430 --> 00:02:35,160
so everyone on this network got a copy of that,

72
00:02:35,160 --> 00:02:37,170
but only PC0 wanted it,

73
00:02:37,170 --> 00:02:39,390
so it's the only one that's going to process that message

74
00:02:39,390 --> 00:02:42,180
as indicated by those blue lines going over it.

75
00:02:42,180 --> 00:02:44,010
So next we're going to get that,

76
00:02:44,010 --> 00:02:46,470
and we've discovered where we asked for it,

77
00:02:46,470 --> 00:02:48,060
we received it as an offer,

78
00:02:48,060 --> 00:02:49,950
so now we need to request it

79
00:02:49,950 --> 00:02:52,110
and say, "Can I keep that address?"

80
00:02:52,110 --> 00:02:53,250
Now remember, we just sent that out to

81
00:02:53,250 --> 00:02:54,270
everybody in the network,

82
00:02:54,270 --> 00:02:55,800
so maybe there was two or three clients

83
00:02:55,800 --> 00:02:57,030
that wanted that address,

84
00:02:57,030 --> 00:02:58,410
so whichever one requests it

85
00:02:58,410 --> 00:03:00,720
is then going to get an acknowledgement from the server.

86
00:03:00,720 --> 00:03:04,680
So PC0 is going to go back and say, "I want this IP address."

87
00:03:04,680 --> 00:03:07,620
And so it sends its request as part of the DORA process.

88
00:03:07,620 --> 00:03:09,600
That goes up to wireless router zero.

89
00:03:09,600 --> 00:03:11,460
When it gets it, it's going to see it,

90
00:03:11,460 --> 00:03:13,800
and in this case, we are sending this as,

91
00:03:13,800 --> 00:03:15,300
again, a broadcast message

92
00:03:15,300 --> 00:03:17,430
because everything is being done in broadcasting

93
00:03:17,430 --> 00:03:19,080
or using DHCP.

94
00:03:19,080 --> 00:03:20,220
Now, once it gets up there

95
00:03:20,220 --> 00:03:21,810
and wireless router zero sees it,

96
00:03:21,810 --> 00:03:23,167
it's going to process that message and say,

97
00:03:23,167 --> 00:03:26,430
"Okay, I acknowledge that PC0 can have this."

98
00:03:26,430 --> 00:03:28,470
And so it sends out another message to everybody,

99
00:03:28,470 --> 00:03:30,210
and this goes to all the PCs,

100
00:03:30,210 --> 00:03:33,060
and again, just like before, this is a broadcast message,

101
00:03:33,060 --> 00:03:36,210
so if it wasn't intended for you, you're just going to drop it.

102
00:03:36,210 --> 00:03:39,030
This case, PC0 wanted it, so it accepts it,

103
00:03:39,030 --> 00:03:40,560
and we get that green check mark.

104
00:03:40,560 --> 00:03:44,520
At this point, PC0 should now have an IP address.

105
00:03:44,520 --> 00:03:46,200
So if we go into PC0,

106
00:03:46,200 --> 00:03:49,110
we should now see that there is a DHCP address assigned.

107
00:03:49,110 --> 00:03:53,400
Now notice we have a default gateway of 192.168.0.1

108
00:03:53,400 --> 00:03:57,240
that has been assigned as a dynamic DHCP gateway for us.

109
00:03:57,240 --> 00:03:59,460
Now, if we look at the wireless interface itself,

110
00:03:59,460 --> 00:04:01,050
we will see its actual IP address,

111
00:04:01,050 --> 00:04:04,710
in this case, 192.168.0.100

112
00:04:04,710 --> 00:04:08,610
with a subnet mask of 255.255.255.255.0

113
00:04:08,610 --> 00:04:10,950
which means we are now on this network,

114
00:04:10,950 --> 00:04:12,210
we have a valid IP,

115
00:04:12,210 --> 00:04:13,320
and we can start to communicate

116
00:04:13,320 --> 00:04:14,760
with other computers on this network,

117
00:04:14,760 --> 00:04:17,760
or out through that default gateway over to the internet

118
00:04:17,760 --> 00:04:19,980
if that wireless router is connected to a cable modem,

119
00:04:19,980 --> 00:04:21,660
or something else like that.

120
00:04:21,660 --> 00:04:25,260
All right, that is the quick and dirty way of how DHCP works

121
00:04:25,260 --> 00:04:26,553
through the DORA process.

122
00:04:26,553 --> 00:04:28,260
Now, the other thing we might want to look at

123
00:04:28,260 --> 00:04:30,480
is inside the wireless router itself.

124
00:04:30,480 --> 00:04:31,830
Now I'm going to go ahead and maximize this

125
00:04:31,830 --> 00:04:33,150
so you can see it a little better.

126
00:04:33,150 --> 00:04:36,210
And over here on the front page, you see the DHCP server.

127
00:04:36,210 --> 00:04:37,350
It is enabled here.

128
00:04:37,350 --> 00:04:39,720
That's why this wireless router was answering up

129
00:04:39,720 --> 00:04:41,340
and handing out IP addresses,

130
00:04:41,340 --> 00:04:43,500
because it has a DHCP server enabled.

131
00:04:43,500 --> 00:04:45,030
And you can see that the router has

132
00:04:45,030 --> 00:04:48,930
an IP address of 192.168.0.1.

133
00:04:48,930 --> 00:04:50,490
This is the default gateway,

134
00:04:50,490 --> 00:04:53,070
and this router is acting as that default gateway.

135
00:04:53,070 --> 00:04:57,570
We also see it's subnet mask, 255.255.255.255.0

136
00:04:57,570 --> 00:05:00,480
That means that we have 256 total IPs,

137
00:05:00,480 --> 00:05:02,880
one for the broadcast, one for the network name,

138
00:05:02,880 --> 00:05:05,280
and 254 that are reserved for clients.

139
00:05:05,280 --> 00:05:07,680
Now, when it comes to handing out DHCP addresses,

140
00:05:07,680 --> 00:05:09,120
where are we going to start that?

141
00:05:09,120 --> 00:05:11,430
Well, here you could see the start IP address.

142
00:05:11,430 --> 00:05:15,180
It's set at 192.168.0.100.

143
00:05:15,180 --> 00:05:18,420
Now, the maximum number of users we're going to hand out is 50.

144
00:05:18,420 --> 00:05:20,670
That means we're only going to hand out IP addresses

145
00:05:20,670 --> 00:05:24,540
that start with 192.168.0.100

146
00:05:24,540 --> 00:05:28,980
all the way up to 192.168.0.149

147
00:05:28,980 --> 00:05:31,680
giving me 50 total clients that we can use.

148
00:05:31,680 --> 00:05:33,060
Now, if you have a particular device

149
00:05:33,060 --> 00:05:35,250
that you want to always get the same IP address,

150
00:05:35,250 --> 00:05:38,310
like maybe a wireless printer, or a laptop, or a server,

151
00:05:38,310 --> 00:05:40,950
you can do that using DHCP reservations.

152
00:05:40,950 --> 00:05:43,680
In this device, you just click DHCP reservations,

153
00:05:43,680 --> 00:05:45,450
and here you'll see it's already been configured

154
00:05:45,450 --> 00:05:46,830
so that there are two devices

155
00:05:46,830 --> 00:05:48,750
that are getting IP addresses this way.

156
00:05:48,750 --> 00:05:53,040
We have one set at 192.168.0.101,

157
00:05:53,040 --> 00:05:54,090
and we know which one that was.

158
00:05:54,090 --> 00:05:55,410
That was PC1,

159
00:05:55,410 --> 00:06:00,090
and then we had 192.168.0.100, which was PC0,

160
00:06:00,090 --> 00:06:01,380
the one we just turned on

161
00:06:01,380 --> 00:06:03,300
and went through the DORA process for.

162
00:06:03,300 --> 00:06:05,310
This means that anytime I turn off that thing

163
00:06:05,310 --> 00:06:07,620
and I put it static, and I come back to doing dynamic,

164
00:06:07,620 --> 00:06:09,390
I'm always going to get the same address,

165
00:06:09,390 --> 00:06:11,190
because this is what I reserved for it.

166
00:06:11,190 --> 00:06:13,560
Now, if I didn't care what address I had for this device,

167
00:06:13,560 --> 00:06:15,360
I can go ahead and remove the mapping.

168
00:06:15,360 --> 00:06:16,470
In the instance of a laptop,

169
00:06:16,470 --> 00:06:18,570
I really don't care which IP it has,

170
00:06:18,570 --> 00:06:20,550
but if I had a printer, or a file server,

171
00:06:20,550 --> 00:06:21,840
or something like that,

172
00:06:21,840 --> 00:06:23,940
I might want to have a DHCP reservation,

173
00:06:23,940 --> 00:06:25,740
so it doesn't change each time.

174
00:06:25,740 --> 00:06:27,480
If you want to add something to this list,

175
00:06:27,480 --> 00:06:28,500
you can just give it a name,

176
00:06:28,500 --> 00:06:30,210
for instance, let's say I have a printer.

177
00:06:30,210 --> 00:06:32,580
I'm going to say that is going to be 103,

178
00:06:32,580 --> 00:06:34,890
and I'm going to save the MAC address for that printer.

179
00:06:34,890 --> 00:06:36,413
And nominally, I'm just going to say it's

180
00:06:36,413 --> 00:06:40,980
11:22:33:44:55:66, and then I'll hit add,

181
00:06:40,980 --> 00:06:43,350
and you'll see that it is now being reserved.

182
00:06:43,350 --> 00:06:44,730
Down here we have printer.

183
00:06:44,730 --> 00:06:48,570
We have the IP address of 192.168.0.103,

184
00:06:48,570 --> 00:06:50,910
and the MAC address that I just assigned.

185
00:06:50,910 --> 00:06:52,860
If I know longer want to have that reservation,

186
00:06:52,860 --> 00:06:54,960
I simply go over and click remove.

187
00:06:54,960 --> 00:06:57,000
Then because this is a graphical user interface,

188
00:06:57,000 --> 00:06:59,850
always click save settings so that your settings are saved

189
00:06:59,850 --> 00:07:01,380
and it is applied to that router.

190
00:07:01,380 --> 00:07:02,910
All right, hopefully you enjoyed

191
00:07:02,910 --> 00:07:05,190
that little demonstration with DHCP,

192
00:07:05,190 --> 00:07:06,780
and it helps you understand a little better

193
00:07:06,780 --> 00:07:10,080
how the whole DORA process works with a DHCP server,

194
00:07:10,080 --> 00:07:11,850
and when you might want to use scopes

195
00:07:11,850 --> 00:07:14,403
and reservations inside your DHCP setup.

