1
00:00:00,050 --> 00:00:01,170
In this lesson,

2
00:00:01,170 --> 00:00:04,470
we're going to discuss the Simple Network Management Protocol.

3
00:00:04,470 --> 00:00:06,210
SNMP is an internet protocol

4
00:00:06,210 --> 00:00:08,189
for collecting and organizing information

5
00:00:08,189 --> 00:00:10,590
about managed devices on IP networks,

6
00:00:10,590 --> 00:00:12,270
and for modifying that information

7
00:00:12,270 --> 00:00:14,280
to change the device's behavior.

8
00:00:14,280 --> 00:00:16,470
When we talk about managed devices, we're referring

9
00:00:16,470 --> 00:00:19,800
to any device that can communicate with an SNMP manager,

10
00:00:19,800 --> 00:00:23,580
known as the management information base, or MIB.

11
00:00:23,580 --> 00:00:25,665
Now, this includes things like routers, and switches,

12
00:00:25,665 --> 00:00:28,380
and firewalls, and printers, and servers,

13
00:00:28,380 --> 00:00:30,671
and even your end user client devices.

14
00:00:30,671 --> 00:00:32,622
SNMP can be used to send and receive data

15
00:00:32,622 --> 00:00:34,410
from these managed devices

16
00:00:34,410 --> 00:00:37,170
back to a centralized network management station.

17
00:00:37,170 --> 00:00:39,540
When you're configuring your SNMP architecture,

18
00:00:39,540 --> 00:00:42,360
you have to have a manager, and then you have agents.

19
00:00:42,360 --> 00:00:44,829
Now, the SNMP manager could be any machine on your network

20
00:00:44,829 --> 00:00:46,667
that's running the SNMP protocol

21
00:00:46,667 --> 00:00:48,510
to collect and process information

22
00:00:48,510 --> 00:00:50,910
from the devices on your LAN or WAN.

23
00:00:50,910 --> 00:00:53,580
Normally though, you're going to set this up on a server,

24
00:00:53,580 --> 00:00:56,220
especially in a large enterprise environment.

25
00:00:56,220 --> 00:00:58,350
Now, the agents are different network devices

26
00:00:58,350 --> 00:01:00,300
that are sending information about themselves

27
00:01:00,300 --> 00:01:02,760
over the network back to that manager.

28
00:01:02,760 --> 00:01:04,998
Usually, an agent is just running a background service

29
00:01:04,998 --> 00:01:06,930
to collect the data and send it back

30
00:01:06,930 --> 00:01:08,550
to the manager at regular intervals

31
00:01:08,550 --> 00:01:11,695
or when they're requested to do so by that manager.

32
00:01:11,695 --> 00:01:14,910
Now, the SNMP manager is essentially a master node,

33
00:01:14,910 --> 00:01:17,280
and it's going to be able to send and receive these messages

34
00:01:17,280 --> 00:01:20,160
to those agents using three different message types.

35
00:01:20,160 --> 00:01:23,370
These are Set, Get, and Trap messages.

36
00:01:23,370 --> 00:01:26,400
Now, the set and get messages are pretty straightforward.

37
00:01:26,400 --> 00:01:29,160
The set request is a manager to an agent request,

38
00:01:29,160 --> 00:01:31,230
and it's going to change the value of a variable

39
00:01:31,230 --> 00:01:32,880
or a list of variables.

40
00:01:32,880 --> 00:01:34,770
When this request is received by the agent,

41
00:01:34,770 --> 00:01:37,080
it's going to update its variables to the latest status

42
00:01:37,080 --> 00:01:39,150
and then provide a response to the manager

43
00:01:39,150 --> 00:01:41,940
with a list of all the new values for that variable.

44
00:01:41,940 --> 00:01:44,160
A get request is a manager-to-agent request

45
00:01:44,160 --> 00:01:47,250
to retrieve the value of a variable or a list of variables.

46
00:01:47,250 --> 00:01:48,197
Using a get request,

47
00:01:48,197 --> 00:01:50,670
one or more variable values can be requested

48
00:01:50,670 --> 00:01:52,200
from the agent by the manager.

49
00:01:52,200 --> 00:01:54,621
Now, a trap message is a little bit different, though,

50
00:01:54,621 --> 00:01:56,874
because these are going to be sent asynchronously

51
00:01:56,874 --> 00:02:00,240
as notifications from the agent to the manager.

52
00:02:00,240 --> 00:02:01,770
In the case of trap messages,

53
00:02:01,770 --> 00:02:03,150
the agent is going to send the information

54
00:02:03,150 --> 00:02:05,820
without first being requested from the manager.

55
00:02:05,820 --> 00:02:08,430
This allows the agents to notify the management station

56
00:02:08,430 --> 00:02:09,263
of any significant events

57
00:02:09,263 --> 00:02:11,730
that are occurring in near real time.

58
00:02:11,730 --> 00:02:13,895
In general, traps are going to be used to provide events

59
00:02:13,895 --> 00:02:17,400
or alarm notifications to the manager from the agent.

60
00:02:17,400 --> 00:02:19,747
Since trap messages are unsolicited information being sent

61
00:02:19,747 --> 00:02:22,650
from the managed devices back to your network manager,

62
00:02:22,650 --> 00:02:25,200
you might be wondering what kind of information is contained

63
00:02:25,200 --> 00:02:27,300
within an SNMP trap message.

64
00:02:27,300 --> 00:02:29,520
Well, this can include lots of things.

65
00:02:29,520 --> 00:02:31,920
Things like uptime, configuration changes,

66
00:02:31,920 --> 00:02:34,350
unexpected downtime of a particular network link,

67
00:02:34,350 --> 00:02:36,630
or other essential information on your network

68
00:02:36,630 --> 00:02:37,680
that's used in the monitoring

69
00:02:37,680 --> 00:02:40,920
and detection of unforeseen events and network outages.

70
00:02:40,920 --> 00:02:43,380
Now, there are two different methods used to encode the data

71
00:02:43,380 --> 00:02:45,554
inside your SNMP trap messages.

72
00:02:45,554 --> 00:02:49,470
These can be sent as granular traps or verbose traps.

73
00:02:49,470 --> 00:02:52,473
With a granular trap, each SNMP trap message is sent

74
00:02:52,473 --> 00:02:55,680
with a unique object identifier, or OID.

75
00:02:55,680 --> 00:02:57,465
This number allows the SNMP manager

76
00:02:57,465 --> 00:02:58,692
to distinguish each message

77
00:02:58,692 --> 00:03:01,170
as a unique message being received.

78
00:03:01,170 --> 00:03:04,020
Now, an OID is a unique object identifier,

79
00:03:04,020 --> 00:03:06,090
which identifies a variable that can be read

80
00:03:06,090 --> 00:03:08,220
or set via SNMP.

81
00:03:08,220 --> 00:03:10,500
As these individual OIDs are received,

82
00:03:10,500 --> 00:03:11,640
they're going to be consolidated

83
00:03:11,640 --> 00:03:15,210
and stored inside a translation file known as the MIB,

84
00:03:15,210 --> 00:03:17,340
or management information base.

85
00:03:17,340 --> 00:03:18,771
The MIB is used to describe the structure

86
00:03:18,771 --> 00:03:21,600
of the management data of a device subsystem

87
00:03:21,600 --> 00:03:23,190
using a hierarchal namespace

88
00:03:23,190 --> 00:03:25,710
containing the object identifier, that OID,

89
00:03:25,710 --> 00:03:27,330
as well as other information.

90
00:03:27,330 --> 00:03:30,600
Since the MIB contains all the details about the OID,

91
00:03:30,600 --> 00:03:32,970
this now allows the SNMP trap messages

92
00:03:32,970 --> 00:03:35,940
to send just the changes for particular OID

93
00:03:35,940 --> 00:03:38,850
and not the entire list of data known about every variable

94
00:03:38,850 --> 00:03:41,250
or measure on a specific device or system.

95
00:03:41,250 --> 00:03:43,020
This saves bandwidth on the network for us

96
00:03:43,020 --> 00:03:45,660
because SNMP traps don't send redundant information

97
00:03:45,660 --> 00:03:46,590
over the network.

98
00:03:46,590 --> 00:03:49,920
Instead, they seek to conserve network resources for us.

99
00:03:49,920 --> 00:03:51,840
Now, if we're using verbose traps,

100
00:03:51,840 --> 00:03:53,256
the SNMP traps may be configured

101
00:03:53,256 --> 00:03:56,040
to contain all the information about a given alert

102
00:03:56,040 --> 00:03:57,510
or event as a payload.

103
00:03:57,510 --> 00:03:58,710
Since more data's being sent

104
00:03:58,710 --> 00:04:00,120
to the manager from the device,

105
00:04:00,120 --> 00:04:02,790
it's going to take up more resources on that server

106
00:04:02,790 --> 00:04:04,470
for it to be able to analyze the data contained

107
00:04:04,470 --> 00:04:05,700
within each trap.

108
00:04:05,700 --> 00:04:06,602
This takes more resources

109
00:04:06,602 --> 00:04:08,730
and it's going to use up more bandwidth

110
00:04:08,730 --> 00:04:10,470
as it goes over our network.

111
00:04:10,470 --> 00:04:13,170
Now, data in these SNMP traps are going to be sent

112
00:04:13,170 --> 00:04:15,840
and stored in a key value pair configuration,

113
00:04:15,840 --> 00:04:17,880
this is known as variable binding.

114
00:04:17,880 --> 00:04:20,190
For example, I might have a list of variable bindings

115
00:04:20,190 --> 00:04:21,390
for a particular router.

116
00:04:21,390 --> 00:04:23,332
Things like SiteName, PR-Branch,

117
00:04:23,332 --> 00:04:26,700
criticality, high, severity, low,

118
00:04:26,700 --> 00:04:28,620
alarm description, high temperature,

119
00:04:28,620 --> 00:04:31,320
and other pertinent information for a given alarm or event,

120
00:04:31,320 --> 00:04:32,670
basically, that's going to be reported

121
00:04:32,670 --> 00:04:34,620
through one of these trap messages.

122
00:04:34,620 --> 00:04:37,140
Now, when you're implementing SNMP in your network,

123
00:04:37,140 --> 00:04:38,010
you need to keep in mind

124
00:04:38,010 --> 00:04:40,470
that there are three different versions of SNMP,

125
00:04:40,470 --> 00:04:42,180
and they're not all created equal.

126
00:04:42,180 --> 00:04:45,210
SNMP Version One, Version Two, and Version Three

127
00:04:45,210 --> 00:04:47,610
have different and varying levels of security.

128
00:04:47,610 --> 00:04:48,930
Now, as you can probably guess,

129
00:04:48,930 --> 00:04:50,571
SNMP Version Three is the newest,

130
00:04:50,571 --> 00:04:52,470
and it was built as an improved version

131
00:04:52,470 --> 00:04:56,130
over Version One and Version Two, making it the most secure.

132
00:04:56,130 --> 00:04:58,890
When you're dealing with SNMP Version One and Version Two,

133
00:04:58,890 --> 00:05:01,740
these versions use a community string to give them access

134
00:05:01,740 --> 00:05:04,290
to the devices as their security mechanism.

135
00:05:04,290 --> 00:05:07,110
Now, these community strings act as a shared secret key,

136
00:05:07,110 --> 00:05:09,475
but in SNMP Version One and Version Two,

137
00:05:09,475 --> 00:05:11,940
it was set and stored in plain text,

138
00:05:11,940 --> 00:05:13,680
making it really insecure.

139
00:05:13,680 --> 00:05:16,230
Now, these default community strings are either public,

140
00:05:16,230 --> 00:05:18,600
read-only, or private, read-write,

141
00:05:18,600 --> 00:05:21,390
and the devices are considered a huge security risk

142
00:05:21,390 --> 00:05:23,490
when they're using these default community strings

143
00:05:23,490 --> 00:05:27,600
in SNMPv1 and v2 because they're vulnerable to attack.

144
00:05:27,600 --> 00:05:29,880
So, in SNMP Version Three,

145
00:05:29,880 --> 00:05:32,730
there was some added security to overcome this issue.

146
00:05:32,730 --> 00:05:34,795
To mitigate the vulnerability with the community strings,

147
00:05:34,795 --> 00:05:38,280
SNMP Version Three provides three security enhancements,

148
00:05:38,280 --> 00:05:41,460
which added integrity, authentication, and confidentiality

149
00:05:41,460 --> 00:05:43,140
to the SNMP protocol.

150
00:05:43,140 --> 00:05:46,110
So, how does SNMP solve all these problems?

151
00:05:46,110 --> 00:05:48,750
Well, for integrity, they started hashing the messages

152
00:05:48,750 --> 00:05:50,160
before they were being transmitted

153
00:05:50,160 --> 00:05:51,630
to make sure nobody could alter the data

154
00:05:51,630 --> 00:05:54,540
as it was being sent from the routers or switches

155
00:05:54,540 --> 00:05:55,950
to the management node.

156
00:05:55,950 --> 00:05:56,880
For authentication,

157
00:05:56,880 --> 00:05:58,920
they start validating the source of the messages,

158
00:05:58,920 --> 00:06:00,750
that way, you knew where they came from.

159
00:06:00,750 --> 00:06:02,790
For confidentiality, they added encryption,

160
00:06:02,790 --> 00:06:04,050
and they started using DES,

161
00:06:04,050 --> 00:06:05,610
or the Data Encryption Standard,

162
00:06:05,610 --> 00:06:07,214
with a 56-bit encryption key

163
00:06:07,214 --> 00:06:09,930
to provide confidentiality and privacy.

164
00:06:09,930 --> 00:06:11,215
Now, if you know anything about encryption,

165
00:06:11,215 --> 00:06:14,130
you know that DES is considered a weak algorithm,

166
00:06:14,130 --> 00:06:17,070
and so, over time, it's been replaced by 3DES

167
00:06:17,070 --> 00:06:19,650
and now AES, the Advanced Encryption Standard,

168
00:06:19,650 --> 00:06:22,530
in newer devices, they rely on SNMPv3,

169
00:06:22,530 --> 00:06:24,990
but you can only use those newer algorithms

170
00:06:24,990 --> 00:06:26,591
if you have a firmware on your device

171
00:06:26,591 --> 00:06:28,740
that supports those newer algorithms.

172
00:06:28,740 --> 00:06:31,380
If not, you're still going to have to rely on DES.

173
00:06:31,380 --> 00:06:33,750
Now, another benefit of SNMP Version Three

174
00:06:33,750 --> 00:06:35,820
is that it groups our SNMP components

175
00:06:35,820 --> 00:06:38,370
into different entities to increase security.

176
00:06:38,370 --> 00:06:40,590
Each group can then be given different authorizations

177
00:06:40,590 --> 00:06:43,200
and access privileges, such as read, write,

178
00:06:43,200 --> 00:06:44,483
or read-write access.

179
00:06:44,483 --> 00:06:45,776
By allowing us to create groups

180
00:06:45,776 --> 00:06:47,850
of smaller and smaller sizes,

181
00:06:47,850 --> 00:06:49,410
we can better protect our networks

182
00:06:49,410 --> 00:06:51,960
and the SNMP traps that are being sent across them.

