1
00:00:00,300 --> 00:00:01,260
In this lesson,

2
00:00:01,260 --> 00:00:03,240
we're going to discuss the various tools we use

3
00:00:03,240 --> 00:00:05,460
when working at the physical layer of our networks,

4
00:00:05,460 --> 00:00:07,860
especially with copper and fiber cabling.

5
00:00:07,860 --> 00:00:10,650
This includes snips and cutters, cable, strippers,

6
00:00:10,650 --> 00:00:14,850
cable crimpers, cable testers, wire maps, cable certifiers,

7
00:00:14,850 --> 00:00:18,030
multimeters, punch down tools, tone generators,

8
00:00:18,030 --> 00:00:20,910
loopback adapters, time-domain reflectometers,

9
00:00:20,910 --> 00:00:23,010
optical time-domain reflectometers,

10
00:00:23,010 --> 00:00:25,890
fiber light meters, fusion splicers, TAPs,

11
00:00:25,890 --> 00:00:27,630
and a spectrum analyzer.

12
00:00:27,630 --> 00:00:29,790
Whew, lots of stuff we're going to cover.

13
00:00:29,790 --> 00:00:31,770
All right, the first cabling tool we have

14
00:00:31,770 --> 00:00:34,080
is probably the most basic one that we're going to cover,

15
00:00:34,080 --> 00:00:35,910
and it's a snip or a cutter.

16
00:00:35,910 --> 00:00:38,760
A snip or a cutter is used to simply cut a piece of cable

17
00:00:38,760 --> 00:00:41,220
off of a larger spool or run of cable.

18
00:00:41,220 --> 00:00:43,530
Now a snip looks a lot like a pair of scissors,

19
00:00:43,530 --> 00:00:45,090
but it has stronger blades

20
00:00:45,090 --> 00:00:46,500
because we're going to use it to cut off

21
00:00:46,500 --> 00:00:49,290
twisted pair copper cables, coaxial cables,

22
00:00:49,290 --> 00:00:51,540
or even larger cable bundles.

23
00:00:51,540 --> 00:00:53,580
Next we have cable strippers.

24
00:00:53,580 --> 00:00:55,230
Now once we cut the piece of cabling

25
00:00:55,230 --> 00:00:57,450
off the larger spool using our snips,

26
00:00:57,450 --> 00:00:59,910
we now need to strip off the end of the cable

27
00:00:59,910 --> 00:01:03,480
and prepare it for attachment to a plastic RJ45 connector

28
00:01:03,480 --> 00:01:05,580
or whatever kind of connector we're going to use.

29
00:01:05,580 --> 00:01:08,670
For example, let's say I wanted to create a crossover cable.

30
00:01:08,670 --> 00:01:11,160
I'm going to cut off some twisted copper from the spool.

31
00:01:11,160 --> 00:01:13,800
Then I'm going to strip both ends using a cable stripper.

32
00:01:13,800 --> 00:01:16,320
This allows me to remove around six to 12 inches

33
00:01:16,320 --> 00:01:18,870
from the outer plastic jacket at the end of the cable.

34
00:01:18,870 --> 00:01:20,880
And then I can spread out those inner wires,

35
00:01:20,880 --> 00:01:23,460
prepare to attach the RJ45 connector to them,

36
00:01:23,460 --> 00:01:26,670
and then I'm going to have to use a crimper to do that.

37
00:01:26,670 --> 00:01:28,770
Now if I'm making a coaxial cable,

38
00:01:28,770 --> 00:01:31,410
I would then use a coaxial specific wire stripper

39
00:01:31,410 --> 00:01:34,530
to remove the outer jacket of the cable and the insulation,

40
00:01:34,530 --> 00:01:37,050
so I can now get to that center conduit

41
00:01:37,050 --> 00:01:39,570
for that RG6 connector to go through

42
00:01:39,570 --> 00:01:41,730
and be put on the end of that cable.

43
00:01:41,730 --> 00:01:43,800
Next we're going to use a cable crimper,

44
00:01:43,800 --> 00:01:45,330
and this is how we attach the connector

45
00:01:45,330 --> 00:01:46,680
to the end of the cable.

46
00:01:46,680 --> 00:01:49,260
Again, let's say I'm making that crossover cable.

47
00:01:49,260 --> 00:01:51,390
I need to use an RJ45 connector

48
00:01:51,390 --> 00:01:54,030
and RJ45-specific cable crimper.

49
00:01:54,030 --> 00:01:56,040
Normally, your cable crimper is going to be used

50
00:01:56,040 --> 00:01:57,360
for twisted pair cabling

51
00:01:57,360 --> 00:02:01,320
and it's going to support both RJ45 and RJ11 connectors.

52
00:02:01,320 --> 00:02:03,210
If you're working with coaxial cables,

53
00:02:03,210 --> 00:02:05,130
there's a different cable crimper you'll use

54
00:02:05,130 --> 00:02:09,120
that'll support RJ6 or RG59 connectors.

55
00:02:09,120 --> 00:02:10,710
All right, now that we've created our cable

56
00:02:10,710 --> 00:02:13,080
using our snips and cutters, our cable stripper,

57
00:02:13,080 --> 00:02:14,310
and our cable crimper,

58
00:02:14,310 --> 00:02:15,810
we need to test the cable

59
00:02:15,810 --> 00:02:18,150
and this is where we use a cable tester.

60
00:02:18,150 --> 00:02:20,880
A cable tester is going to be used to verify the continuity

61
00:02:20,880 --> 00:02:22,710
of each of the eight individual wires

62
00:02:22,710 --> 00:02:24,840
inside of that twisted pair cable.

63
00:02:24,840 --> 00:02:27,300
This will verify there's no breaks inside the cable,

64
00:02:27,300 --> 00:02:30,150
and then we have good continuity from one end to the other.

65
00:02:30,150 --> 00:02:31,560
By using a cable tester,

66
00:02:31,560 --> 00:02:33,600
we can verify the pin outs were done properly

67
00:02:33,600 --> 00:02:36,150
and that each individual wire in the twisted pair cable

68
00:02:36,150 --> 00:02:38,190
is properly connected for a straight through

69
00:02:38,190 --> 00:02:40,980
or crossover cable, whichever one we were making.

70
00:02:40,980 --> 00:02:42,480
Now, there are different types of testers

71
00:02:42,480 --> 00:02:44,010
for different types of cable.

72
00:02:44,010 --> 00:02:45,780
If you're testing an ethernet cable,

73
00:02:45,780 --> 00:02:49,020
you're going to need one with an RJ45 connector on the cable

74
00:02:49,020 --> 00:02:50,730
and that cable tester.

75
00:02:50,730 --> 00:02:51,840
Now, if you work with a lot

76
00:02:51,840 --> 00:02:53,280
of different types of networks though,

77
00:02:53,280 --> 00:02:55,470
you may want to use a multi-tester.

78
00:02:55,470 --> 00:02:57,210
A multi-tester isn't going to support

79
00:02:57,210 --> 00:02:59,940
just ethernet cables using RJ45,

80
00:02:59,940 --> 00:03:03,450
but it can also support BNC connectors for coaxial cables,

81
00:03:03,450 --> 00:03:05,310
IDE connectors for hard drives,

82
00:03:05,310 --> 00:03:08,370
PATA and SATA connectors for internal computer devices,

83
00:03:08,370 --> 00:03:12,330
RJ45, again, for your ethernet, RJ11 for your telephones,

84
00:03:12,330 --> 00:03:17,330
fiber, DB25, DB9s, and anything else you might need to test.

85
00:03:17,520 --> 00:03:19,770
Next, we have a wire mapping tool.

86
00:03:19,770 --> 00:03:22,110
Now, a wire map tool is like a cable tester,

87
00:03:22,110 --> 00:03:25,200
but it works specifically for twisted pair ethernet cables.

88
00:03:25,200 --> 00:03:27,360
In addition to testing the cable from end to end,

89
00:03:27,360 --> 00:03:29,400
we can diagnose any issues with that cable

90
00:03:29,400 --> 00:03:31,650
such as an open pair, a shorted pair,

91
00:03:31,650 --> 00:03:34,800
a short between the pairs, a reverse pair, a cross pair,

92
00:03:34,800 --> 00:03:36,090
or a split pair.

93
00:03:36,090 --> 00:03:38,670
Now, an open pair occurs when one or more conductors

94
00:03:38,670 --> 00:03:41,220
in the pair are not connected on one of the pins

95
00:03:41,220 --> 00:03:42,690
at either end of the cable.

96
00:03:42,690 --> 00:03:45,300
In other words, the electrical continuity of the conductor

97
00:03:45,300 --> 00:03:46,830
is being interrupted.

98
00:03:46,830 --> 00:03:48,000
This can occur if the conductor

99
00:03:48,000 --> 00:03:50,040
has been physically broken somewhere in the middle

100
00:03:50,040 --> 00:03:51,720
or because you had an incomplete

101
00:03:51,720 --> 00:03:54,480
or improper punch down on a patch panel.

102
00:03:54,480 --> 00:03:57,210
Now, a short can occur when conductors of a wire pair

103
00:03:57,210 --> 00:03:59,310
are connected to each other at any location

104
00:03:59,310 --> 00:04:00,570
within the cable.

105
00:04:00,570 --> 00:04:02,250
A short between the pairs occurs

106
00:04:02,250 --> 00:04:04,710
when the conductors of two wires in different pairs

107
00:04:04,710 --> 00:04:07,380
are connected at any location within the cable.

108
00:04:07,380 --> 00:04:10,200
A reverse pair occurs when two wires in a single pair

109
00:04:10,200 --> 00:04:12,720
are connected to the opposite pins of that pair

110
00:04:12,720 --> 00:04:14,430
on the other end of the cable.

111
00:04:14,430 --> 00:04:17,760
And cross pairs occur when both wires of one color pair

112
00:04:17,760 --> 00:04:19,800
are connected to the pins of a different color pair

113
00:04:19,800 --> 00:04:21,450
on the opposite end.

114
00:04:21,450 --> 00:04:23,970
Split pairs occur when a wire from one pair

115
00:04:23,970 --> 00:04:25,410
is split away from the other

116
00:04:25,410 --> 00:04:28,260
and crosses over the wire into an adjacent pair.

117
00:04:28,260 --> 00:04:29,310
Because this type of fault

118
00:04:29,310 --> 00:04:30,780
essentially requires the same mistake

119
00:04:30,780 --> 00:04:32,940
to be made at both ends of the cable,

120
00:04:32,940 --> 00:04:34,740
it usually doesn't happen very often

121
00:04:34,740 --> 00:04:36,840
unless somebody meant to do it.

122
00:04:36,840 --> 00:04:38,910
Next we have a cable certifier.

123
00:04:38,910 --> 00:04:41,490
Now, cable certifier is used with an existing cable

124
00:04:41,490 --> 00:04:44,100
to determine its category or data throughput.

125
00:04:44,100 --> 00:04:45,270
I can plug into your network

126
00:04:45,270 --> 00:04:47,190
and find out is it a Cat5,

127
00:04:47,190 --> 00:04:50,340
Cat6, Cat5e, Cat7, or Cat8 network.

128
00:04:50,340 --> 00:04:53,040
It's going to tell me, based on the frequency range being used,

129
00:04:53,040 --> 00:04:54,570
what the throughput of the cables are

130
00:04:54,570 --> 00:04:57,060
and the standard output is shown here on the screen

131
00:04:57,060 --> 00:04:58,380
as you can see.

132
00:04:58,380 --> 00:05:00,420
Now, notice I have a wire mapping here

133
00:05:00,420 --> 00:05:01,890
that shows my pins are correct,

134
00:05:01,890 --> 00:05:03,450
that it's a straight through cable.

135
00:05:03,450 --> 00:05:06,000
It's also going to tell me how long this cable is.

136
00:05:06,000 --> 00:05:08,160
In this case, it knows it's 10 feet.

137
00:05:08,160 --> 00:05:10,440
Then it's going to tell me what the delay is on the cable.

138
00:05:10,440 --> 00:05:12,390
It tells me what the resistance is on the cable.

139
00:05:12,390 --> 00:05:14,490
All that type of good information can be gotten

140
00:05:14,490 --> 00:05:16,140
from a cable certifier.

141
00:05:16,140 --> 00:05:18,330
Essentially, it can do a lot of the same functions

142
00:05:18,330 --> 00:05:19,470
as a cable tester,

143
00:05:19,470 --> 00:05:22,440
but it goes further and gives you additional details

144
00:05:22,440 --> 00:05:24,240
such as length and throughput.

145
00:05:24,240 --> 00:05:26,550
So I can use this to determine the length

146
00:05:26,550 --> 00:05:28,620
and make sure it's right for a particular cable

147
00:05:28,620 --> 00:05:30,690
or if the cable has been crimped properly

148
00:05:30,690 --> 00:05:32,280
just like a cable tester does.

149
00:05:32,280 --> 00:05:35,250
But all this other information is really good too.

150
00:05:35,250 --> 00:05:37,350
Now, because of all this extra information,

151
00:05:37,350 --> 00:05:39,480
these devices are more expensive.

152
00:05:39,480 --> 00:05:41,400
When you're dealing with a simple cable tester,

153
00:05:41,400 --> 00:05:43,350
you can buy that for about $10,

154
00:05:43,350 --> 00:05:48,350
but a cable certifier might cost you $100 or $200 or $300.

155
00:05:48,390 --> 00:05:50,310
Next, we have a multimeter.

156
00:05:50,310 --> 00:05:52,890
A multimeter is a way to check the voltage or amperage

157
00:05:52,890 --> 00:05:55,080
or the resistance of a copper cable.

158
00:05:55,080 --> 00:05:57,420
This can be used to verify if a cable is broken or not

159
00:05:57,420 --> 00:05:58,950
by checking its resistance.

160
00:05:58,950 --> 00:06:01,590
Now, if I check a copper cable from end to end,

161
00:06:01,590 --> 00:06:04,800
I should get something at zero resistance or zero ohms

162
00:06:04,800 --> 00:06:07,770
because the center of that wire is pure copper.

163
00:06:07,770 --> 00:06:10,890
Now, if there's a high level of resistance or an overload,

164
00:06:10,890 --> 00:06:13,410
that means there's a break in the cable somewhere.

165
00:06:13,410 --> 00:06:16,410
Now, multimeters can be used to check coaxial cables as well

166
00:06:16,410 --> 00:06:17,880
to ensure there's no cuts or breaks

167
00:06:17,880 --> 00:06:19,470
in the middle of a patch run.

168
00:06:19,470 --> 00:06:23,130
Or it can be used to test power sources and power cords.

169
00:06:23,130 --> 00:06:24,990
For example, before I plug a computer

170
00:06:24,990 --> 00:06:27,030
or a switch or a router into an outlet,

171
00:06:27,030 --> 00:06:28,320
I might want to check that outlet

172
00:06:28,320 --> 00:06:30,660
and verify I'm getting the right voltage.

173
00:06:30,660 --> 00:06:34,680
Is it getting 115 to 125 volts here in America?

174
00:06:34,680 --> 00:06:35,670
That would be right.

175
00:06:35,670 --> 00:06:39,300
If I'm in Europe, I should be getting 230 to 240 volts.

176
00:06:39,300 --> 00:06:41,910
Either way, I can test that using my multimeter

177
00:06:41,910 --> 00:06:44,400
and make sure I'm getting good, clean, reliable power

178
00:06:44,400 --> 00:06:47,310
before I connect my very expensive switches, routers,

179
00:06:47,310 --> 00:06:49,680
other gear into those power outlets.

180
00:06:49,680 --> 00:06:51,450
Next, we have a punch down tools.

181
00:06:51,450 --> 00:06:53,220
If I'm going to be using a 66 block

182
00:06:53,220 --> 00:06:55,860
or a 110 block for either my phones or my networks

183
00:06:55,860 --> 00:06:57,600
or even my network jacks in the wall,

184
00:06:57,600 --> 00:07:00,780
I'm going to be using punch down tools to install those cables.

185
00:07:00,780 --> 00:07:03,300
This is going to terminate the wire on the punch down block

186
00:07:03,300 --> 00:07:05,220
and strip off the excess insulation

187
00:07:05,220 --> 00:07:08,640
and trimming off all the extra wires that we no longer need.

188
00:07:08,640 --> 00:07:12,360
Next, we have a tone generator, also known as a toner probe.

189
00:07:12,360 --> 00:07:14,370
Now, a tone generator allows a technician

190
00:07:14,370 --> 00:07:16,620
to generate a tone on one end of the connection

191
00:07:16,620 --> 00:07:19,110
and use the probe to audibly detect the wire connected

192
00:07:19,110 --> 00:07:20,520
on the other side.

193
00:07:20,520 --> 00:07:22,710
This is often called a fox and hound

194
00:07:22,710 --> 00:07:24,900
because the fox generates the tone

195
00:07:24,900 --> 00:07:26,910
and then the hound is used to sniff it out

196
00:07:26,910 --> 00:07:29,220
and find it using that toner probe.

197
00:07:29,220 --> 00:07:31,320
A tone generator is going to be used to understand

198
00:07:31,320 --> 00:07:33,930
where the cables are running inside of your walls

199
00:07:33,930 --> 00:07:36,087
whenever you have an unlabeled or undocumented network

200
00:07:36,087 --> 00:07:38,310
and you need to figure out which wire is connected

201
00:07:38,310 --> 00:07:40,500
to which jack inside your building.

202
00:07:40,500 --> 00:07:43,860
Next, we have a loopback adapter or a loopback device.

203
00:07:43,860 --> 00:07:45,930
These loopback adapters are going to be different

204
00:07:45,930 --> 00:07:48,060
depending on whether or not you're using ethernet

205
00:07:48,060 --> 00:07:49,710
or fiber in your networks.

206
00:07:49,710 --> 00:07:52,170
Now, if you're using twisted pair cabling in your networks,

207
00:07:52,170 --> 00:07:54,870
you can create your own inexpensive loopback adapter

208
00:07:54,870 --> 00:07:57,420
by simply connecting some of the twisted pair wires

209
00:07:57,420 --> 00:07:59,670
from the transmit side to the receive pins

210
00:07:59,670 --> 00:08:02,430
inside the same RJ45 connector.

211
00:08:02,430 --> 00:08:04,680
Essentially, you need to have your transmit plus going

212
00:08:04,680 --> 00:08:07,980
to your receive plus, which means pin one goes to pin three.

213
00:08:07,980 --> 00:08:10,590
Then you need transmit minus going to receive minus.

214
00:08:10,590 --> 00:08:13,020
This is pin two going to pin six.

215
00:08:13,020 --> 00:08:14,790
If you're using fiber in your networks,

216
00:08:14,790 --> 00:08:16,680
you can simply connect your transmit port

217
00:08:16,680 --> 00:08:19,230
to your receive port using a fiber patch cable,

218
00:08:19,230 --> 00:08:21,240
and this creates a loopback for you.

219
00:08:21,240 --> 00:08:23,640
This is extremely easy to do if you're using an ST

220
00:08:23,640 --> 00:08:24,930
or SC connection,

221
00:08:24,930 --> 00:08:27,120
and they do make specialized loopback plugs

222
00:08:27,120 --> 00:08:28,500
in a small form factor

223
00:08:28,500 --> 00:08:29,790
so you can carry these in your pocket

224
00:08:29,790 --> 00:08:31,740
when you're working as a network technician.

225
00:08:31,740 --> 00:08:33,539
Now, once you connect your loopback adapter

226
00:08:33,539 --> 00:08:34,373
to your network,

227
00:08:34,373 --> 00:08:36,659
you can then use specialized diagnostic software

228
00:08:36,659 --> 00:08:38,280
to test the connectivity of the client

229
00:08:38,280 --> 00:08:40,470
and ensure everything's working properly.

230
00:08:40,470 --> 00:08:42,330
Next, we have a TDR,

231
00:08:42,330 --> 00:08:44,820
which is known as a time-domain reflectometer.

232
00:08:44,820 --> 00:08:47,520
Now a time-domain reflectometer is going to locate breaks

233
00:08:47,520 --> 00:08:50,400
in a copper cable and provide an estimate of the severity

234
00:08:50,400 --> 00:08:52,200
and the distance to that break.

235
00:08:52,200 --> 00:08:54,750
If I have cable running underground between two buildings

236
00:08:54,750 --> 00:08:56,460
and I need to figure out where it's broken

237
00:08:56,460 --> 00:08:57,660
because my network stopped working

238
00:08:57,660 --> 00:08:59,610
and I need to dig a hole and fix that,

239
00:08:59,610 --> 00:09:03,240
I can use a TDR to locate at exactly where that break is.

240
00:09:03,240 --> 00:09:04,560
When the TDR is run,

241
00:09:04,560 --> 00:09:06,120
it's going to report back that there's a break

242
00:09:06,120 --> 00:09:08,100
at approximately 87 feet away,

243
00:09:08,100 --> 00:09:10,230
and now I know exactly where to dig,

244
00:09:10,230 --> 00:09:13,050
being able to access that cable and then patch that cable.

245
00:09:13,050 --> 00:09:14,910
Now, there's also an optical version of this

246
00:09:14,910 --> 00:09:18,450
called an optical time-domain reflectometer, or OTDR.

247
00:09:18,450 --> 00:09:20,550
This is going to be used for fiber optic cables.

248
00:09:20,550 --> 00:09:21,870
It works the same way,

249
00:09:21,870 --> 00:09:23,970
but instead of using the resistance of the wire,

250
00:09:23,970 --> 00:09:26,220
we're using light and the bounce back for it.

251
00:09:26,220 --> 00:09:28,950
This is really helpful, especially with fiber optic cables.

252
00:09:28,950 --> 00:09:31,830
'cause remember, your fiber optic cables can be many,

253
00:09:31,830 --> 00:09:33,060
many miles long,

254
00:09:33,060 --> 00:09:36,270
and so knowing that the break is at 3.57 miles away

255
00:09:36,270 --> 00:09:37,890
is a lot more useful than trying

256
00:09:37,890 --> 00:09:39,720
to figure out where it is on your own.

257
00:09:39,720 --> 00:09:42,780
This is going to be essential if you're using fiber underground

258
00:09:42,780 --> 00:09:44,927
and you want to make sure you have an OTDR

259
00:09:44,927 --> 00:09:47,370
'cause you won't be able to visually inspect your fiber

260
00:09:47,370 --> 00:09:48,750
if it's buried.

261
00:09:48,750 --> 00:09:50,820
Next, we have a fiber light meter,

262
00:09:50,820 --> 00:09:53,130
also known as an optical power meter.

263
00:09:53,130 --> 00:09:54,780
Now, a fiber light meter is a device

264
00:09:54,780 --> 00:09:57,720
that provides a continuous wave of stable source of energy

265
00:09:57,720 --> 00:09:59,490
for attenuation measurements.

266
00:09:59,490 --> 00:10:02,040
Essentially, this device is going to include a source

267
00:10:02,040 --> 00:10:03,630
like a laser or an LED,

268
00:10:03,630 --> 00:10:04,620
and it's going to be stabilized

269
00:10:04,620 --> 00:10:06,690
using an automatic gain control mechanism

270
00:10:06,690 --> 00:10:07,860
so it can accurately measure

271
00:10:07,860 --> 00:10:09,750
how effective a fiber optic cable

272
00:10:09,750 --> 00:10:11,670
is transmitting that light.

273
00:10:11,670 --> 00:10:13,470
If you're using multimode fibers,

274
00:10:13,470 --> 00:10:16,320
you're going to use an LED-based fiber light meter.

275
00:10:16,320 --> 00:10:18,000
If you're using single mode fibers,

276
00:10:18,000 --> 00:10:21,060
you need to use a laser-based fiber light meter.

277
00:10:21,060 --> 00:10:22,800
Basically, you're going to connect one part

278
00:10:22,800 --> 00:10:23,880
of the fiber light meter

279
00:10:23,880 --> 00:10:25,860
to each end of the fiber connection.

280
00:10:25,860 --> 00:10:27,837
One end is going to send light down the fiber.

281
00:10:27,837 --> 00:10:30,720
The other end is going to measure how much is being received.

282
00:10:30,720 --> 00:10:33,000
Then it's going to report back to you in decibels

283
00:10:33,000 --> 00:10:34,440
the amount of loss experienced

284
00:10:34,440 --> 00:10:36,630
as the light traveled along the cable.

285
00:10:36,630 --> 00:10:39,210
If the loss is higher than 0.5 decibels,

286
00:10:39,210 --> 00:10:41,790
both ends of the fiber should be cleaned, polished,

287
00:10:41,790 --> 00:10:43,410
and retested once more.

288
00:10:43,410 --> 00:10:45,300
Next, we have fusion splicers.

289
00:10:45,300 --> 00:10:47,370
Now, a fusion splicer is a machine that's used

290
00:10:47,370 --> 00:10:49,740
to permanently join two fibers together.

291
00:10:49,740 --> 00:10:51,540
If you have a break in a fiber cable,

292
00:10:51,540 --> 00:10:54,090
a fusion splicer is going to be used to cut out that break

293
00:10:54,090 --> 00:10:57,300
and then reconnect or splice them back together again.

294
00:10:57,300 --> 00:10:59,280
If you're dealing with a fiber patch cable,

295
00:10:59,280 --> 00:11:01,410
I wouldn't bother using a fusion splicer.

296
00:11:01,410 --> 00:11:03,510
Instead, you're just going to replace the cable.

297
00:11:03,510 --> 00:11:06,090
But if you have a really long fiber cable running

298
00:11:06,090 --> 00:11:08,100
between two buildings or across the city,

299
00:11:08,100 --> 00:11:09,930
that is a time where it's going to be a lot cheaper

300
00:11:09,930 --> 00:11:12,990
to fix that broken fiber by using a fusion splicer

301
00:11:12,990 --> 00:11:13,950
than it would be to dig up

302
00:11:13,950 --> 00:11:16,380
and replace the entire cable again.

303
00:11:16,380 --> 00:11:18,180
Fusion splicers are going to require training

304
00:11:18,180 --> 00:11:19,350
to properly use them.

305
00:11:19,350 --> 00:11:20,940
It's a very specialized skillset

306
00:11:20,940 --> 00:11:22,770
and a job for a network technician

307
00:11:22,770 --> 00:11:24,630
who works a lot with fiber networks.

308
00:11:24,630 --> 00:11:27,300
I'll tell you personally, I've never used a fusion splicer.

309
00:11:27,300 --> 00:11:29,640
I've hired people when I had that need.

310
00:11:29,640 --> 00:11:31,140
Next we have a TAP.

311
00:11:31,140 --> 00:11:32,880
A TAP is a simple device that connects

312
00:11:32,880 --> 00:11:34,770
directly to the cable infrastructure

313
00:11:34,770 --> 00:11:37,890
and splits or copies those packets for use and analysis,

314
00:11:37,890 --> 00:11:40,320
security, or general network management.

315
00:11:40,320 --> 00:11:41,760
You're going to need to purchase and install

316
00:11:41,760 --> 00:11:43,890
the appropriate TAP for your type of network

317
00:11:43,890 --> 00:11:46,470
depending on if you're using copper or fiber.

318
00:11:46,470 --> 00:11:48,780
Now, basically you're going to connect the TAP in line

319
00:11:48,780 --> 00:11:49,620
to your network

320
00:11:49,620 --> 00:11:52,500
and it's going to create a duplicate copy of every frame,

321
00:11:52,500 --> 00:11:54,750
one going out the TAP port where it's going to be collected

322
00:11:54,750 --> 00:11:57,030
and analyzed by your cybersecurity tool set

323
00:11:57,030 --> 00:11:58,590
and the other one out to your network

324
00:11:58,590 --> 00:12:00,720
so it can be processed by the equipment.

325
00:12:00,720 --> 00:12:02,730
This is used heavily in cybersecurity,

326
00:12:02,730 --> 00:12:04,530
but can also be used in network management

327
00:12:04,530 --> 00:12:06,270
and network operations.

328
00:12:06,270 --> 00:12:08,520
Finally, we have a spectrum analyzer.

329
00:12:08,520 --> 00:12:10,560
A spectrum analyzer is a device that measures

330
00:12:10,560 --> 00:12:12,330
and displays the signal amplitude

331
00:12:12,330 --> 00:12:14,910
or the strength as it varies by frequency

332
00:12:14,910 --> 00:12:17,820
within its frequency range known as the spectrum.

333
00:12:17,820 --> 00:12:20,310
Now, the frequency is going to appear on the X-axis,

334
00:12:20,310 --> 00:12:21,990
or the horizontal axis,

335
00:12:21,990 --> 00:12:24,570
and the amplitude is going to be displayed on the Y-axis,

336
00:12:24,570 --> 00:12:26,250
or the vertical axis.

337
00:12:26,250 --> 00:12:27,960
A spectrum analyzer is going to be used

338
00:12:27,960 --> 00:12:29,400
to measure the electrical signals

339
00:12:29,400 --> 00:12:31,530
that are being passed over that medium.

340
00:12:31,530 --> 00:12:33,690
Now, the medium could be a copper cable,

341
00:12:33,690 --> 00:12:35,550
such as ethernet or coaxial,

342
00:12:35,550 --> 00:12:37,530
or it could be a radio frequency

343
00:12:37,530 --> 00:12:39,810
if you're listening to a particular radio wave.

344
00:12:39,810 --> 00:12:42,030
If you're working with a satellite connection, for instance,

345
00:12:42,030 --> 00:12:43,890
you might use a spectrum analyzer

346
00:12:43,890 --> 00:12:46,380
to ensure your modem and radio are properly sending

347
00:12:46,380 --> 00:12:49,770
and receiving the carrier waves to and from that satellite.

348
00:12:49,770 --> 00:12:51,990
Again, this is a more specialized tool

349
00:12:51,990 --> 00:12:53,610
than most entry-level network technicians

350
00:12:53,610 --> 00:12:55,710
are not going to find themselves operating.

351
00:12:55,710 --> 00:12:57,840
All right, I know that was a lot of different tools

352
00:12:57,840 --> 00:12:59,130
that we just covered.

353
00:12:59,130 --> 00:13:01,080
Remember, when you're dealing with the physical layer

354
00:13:01,080 --> 00:13:01,913
of your network,

355
00:13:01,913 --> 00:13:04,590
especially if you're dealing with copper or fiber cabling,

356
00:13:04,590 --> 00:13:06,570
you're going to be using a lot of different tools

357
00:13:06,570 --> 00:13:08,100
for a lot of different things.

358
00:13:08,100 --> 00:13:10,320
This includes things like snips and cutters,

359
00:13:10,320 --> 00:13:13,500
cable strippers, cable crimpers, cable testers,

360
00:13:13,500 --> 00:13:17,880
wire maps, cable certifiers, multimeters, punch down tools,

361
00:13:17,880 --> 00:13:20,190
tone generators, loopback adapters,

362
00:13:20,190 --> 00:13:21,870
time-domain reflectometers,

363
00:13:21,870 --> 00:13:25,020
optical time-domain reflectometers, fiber light meters,

364
00:13:25,020 --> 00:13:28,680
fusion splicers, TAPs, and spectrum analyzers.

365
00:13:28,680 --> 00:13:30,750
For the exam, it's important for you to understand

366
00:13:30,750 --> 00:13:33,030
which tool you might use to troubleshoot

367
00:13:33,030 --> 00:13:35,230
which type of cable and which type of issue.

