1
00:00:00,320 --> 00:00:02,100
In this video, we're going to cover

2
00:00:02,100 --> 00:00:05,550
the ipconfig, ifconfig, and ip command line tools

3
00:00:05,550 --> 00:00:07,680
and how we use them in maintaining and troubleshooting

4
00:00:07,680 --> 00:00:08,670
our networks.

5
00:00:08,670 --> 00:00:10,590
First, we have ipconfig.

6
00:00:10,590 --> 00:00:13,650
ipconfig, or IP configuration is used to display

7
00:00:13,650 --> 00:00:16,920
all of the current TCP/IP network configuration values

8
00:00:16,920 --> 00:00:19,950
and refreshes the DHCP and DNS settings

9
00:00:19,950 --> 00:00:21,990
for a Windows client or server.

10
00:00:21,990 --> 00:00:24,210
If you enter ipconfig at the command prompt,

11
00:00:24,210 --> 00:00:26,280
you're going to get some basic information back

12
00:00:26,280 --> 00:00:28,470
about the TCP/IP network configuration

13
00:00:28,470 --> 00:00:30,660
in use by your Windows client.

14
00:00:30,660 --> 00:00:33,990
In this example, you can see my IPv6 link local address,

15
00:00:33,990 --> 00:00:37,350
my IPv4 address of 10.0.2.15,

16
00:00:37,350 --> 00:00:41,250
my subnet mask of 255.255.255.0,

17
00:00:41,250 --> 00:00:44,610
and my default gateway of 10.0.2.2.

18
00:00:44,610 --> 00:00:46,320
There isn't a whole lot of details here,

19
00:00:46,320 --> 00:00:48,510
but it does give you the basics.

20
00:00:48,510 --> 00:00:51,030
Now, for example, if I entered ipconfig

21
00:00:51,030 --> 00:00:55,280
and my IP address was listed as 169.254.132.51,

22
00:00:56,580 --> 00:00:58,830
that would indicate I have a DHCP issue

23
00:00:58,830 --> 00:01:01,350
because my computer is now assigned an APIPA address

24
00:01:01,350 --> 00:01:04,050
or Automatic Private IP Address value.

25
00:01:04,050 --> 00:01:06,930
Now, if this was the case, I could try to get a new IP

26
00:01:06,930 --> 00:01:08,610
by releasing and renewing my connection

27
00:01:08,610 --> 00:01:10,470
or by rebooting my machine.

28
00:01:10,470 --> 00:01:11,610
If that doesn't work,

29
00:01:11,610 --> 00:01:13,680
then I can troubleshoot the DHCP server

30
00:01:13,680 --> 00:01:15,930
and ensure that it's functioning properly.

31
00:01:15,930 --> 00:01:17,730
To release the current IP address,

32
00:01:17,730 --> 00:01:20,820
you have to enter the ipconfig /release command

33
00:01:20,820 --> 00:01:21,960
and hit enter.

34
00:01:21,960 --> 00:01:23,340
At this point, you're going to see

35
00:01:23,340 --> 00:01:25,410
your IP configuration displayed again,

36
00:01:25,410 --> 00:01:29,070
this time showing you have no IPv4 address, no subnet mask,

37
00:01:29,070 --> 00:01:31,050
and no default gateway assigned.

38
00:01:31,050 --> 00:01:33,210
To attempt to get a new DHCP address,

39
00:01:33,210 --> 00:01:35,640
you're going to enter ipconfig /renew,

40
00:01:35,640 --> 00:01:37,110
and then you press enter.

41
00:01:37,110 --> 00:01:40,320
Now you're going to get an IPv4 address, a subnet mask,

42
00:01:40,320 --> 00:01:43,320
and a default gateway assigned through the DHCP DORA

43
00:01:43,320 --> 00:01:46,860
or Discover, Offer, Request, and Acknowledge process.

44
00:01:46,860 --> 00:01:49,350
Now, you may remember that DHCP actually gives up

45
00:01:49,350 --> 00:01:51,270
a bit more information though, right?

46
00:01:51,270 --> 00:01:53,310
What is our DNS servers IP address?

47
00:01:53,310 --> 00:01:56,190
When is my lease going to be obtained and when does it expire?

48
00:01:56,190 --> 00:01:57,630
How can I find my Mac address

49
00:01:57,630 --> 00:01:59,100
if I need to know the physical address

50
00:01:59,100 --> 00:02:01,500
for some kind of troubleshooting of Layer 2 issues?

51
00:02:01,500 --> 00:02:03,750
All of these details simply aren't being displayed

52
00:02:03,750 --> 00:02:06,360
when I type in ipconfig and hitting enter though,

53
00:02:06,360 --> 00:02:09,930
so I want to enter ipconfig /all.

54
00:02:09,930 --> 00:02:12,510
Then I'll be able to see all these additional details

55
00:02:12,510 --> 00:02:15,060
about my TCP/IP configuration.

56
00:02:15,060 --> 00:02:18,630
Now here I can see my host name, MSEDGEWIN10,

57
00:02:18,630 --> 00:02:19,680
I can also see a description

58
00:02:19,680 --> 00:02:21,210
of the model of the network adapter,

59
00:02:21,210 --> 00:02:23,430
or the network interface part I have installed.

60
00:02:23,430 --> 00:02:24,690
I can see the physical address

61
00:02:24,690 --> 00:02:27,360
and the fact that DHCP is enabled on this machine,

62
00:02:27,360 --> 00:02:29,370
as well as the autoconfiguration being enabled

63
00:02:29,370 --> 00:02:31,800
if DHCP fails to get an IP address,

64
00:02:31,800 --> 00:02:34,260
which means I can have an APIPA address assigned

65
00:02:34,260 --> 00:02:35,160
if I need to.

66
00:02:35,160 --> 00:02:37,470
I can also see the IP address and subnet mask

67
00:02:37,470 --> 00:02:39,990
just like I did in the summarized ipconfig version,

68
00:02:39,990 --> 00:02:41,760
but now I also see my lease times

69
00:02:41,760 --> 00:02:44,730
of the issue and expiration for that DHCP address.

70
00:02:44,730 --> 00:02:46,620
I also see my default gateway,

71
00:02:46,620 --> 00:02:49,950
my DHCP server and DNS servers IP addresses.

72
00:02:49,950 --> 00:02:51,570
That is a lot of information

73
00:02:51,570 --> 00:02:54,000
and it can be really helpful to you as a network technician

74
00:02:54,000 --> 00:02:55,860
during your troubleshooting efforts.

75
00:02:55,860 --> 00:02:57,780
Next, we have ifconfig.

76
00:02:57,780 --> 00:03:00,600
Now ifconfig stands for interface configuration,

77
00:03:00,600 --> 00:03:03,030
and it's the command line tool used in Unix, Linux,

78
00:03:03,030 --> 00:03:06,270
and OS X systems to display IP address information

79
00:03:06,270 --> 00:03:08,880
just like we did with ipconfig in Windows.

80
00:03:08,880 --> 00:03:10,770
ipconfig only works in Windows,

81
00:03:10,770 --> 00:03:11,730
so if you're going to be working

82
00:03:11,730 --> 00:03:15,840
on a Unix, Linux, or OSX system, you have to use ifconfig.

83
00:03:15,840 --> 00:03:18,720
Now, ifconfig is used to configure your network interfaces

84
00:03:18,720 --> 00:03:20,910
and troubleshoot network connectivity issues.

85
00:03:20,910 --> 00:03:22,920
If you enter the command ifconfig by itself

86
00:03:22,920 --> 00:03:24,810
and you press enter, the system is going to display

87
00:03:24,810 --> 00:03:27,300
the status of the currently active interfaces.

88
00:03:27,300 --> 00:03:30,630
If you only want to see a single interface though, like en0,

89
00:03:30,630 --> 00:03:33,330
you can enter ifconfig en0.

90
00:03:33,330 --> 00:03:34,260
Now, if you want to display

91
00:03:34,260 --> 00:03:36,270
all the interfaces available on a system,

92
00:03:36,270 --> 00:03:38,430
even if those interfaces are currently down,

93
00:03:38,430 --> 00:03:40,830
you would enter ifconfig -a,

94
00:03:40,830 --> 00:03:42,300
which is like the slash all command

95
00:03:42,300 --> 00:03:44,130
that we used inside of Windows.

96
00:03:44,130 --> 00:03:47,820
Now, the big difference here between ifconfig and ipconfig

97
00:03:47,820 --> 00:03:48,653
is that you're going to get

98
00:03:48,653 --> 00:03:50,910
the same amount of information with ifconfig,

99
00:03:50,910 --> 00:03:53,010
regardless of whether you're using it by itself,

100
00:03:53,010 --> 00:03:55,860
with an active interface, or with the dash-a option.

101
00:03:55,860 --> 00:03:58,530
There's no brief version of it, the only difference

102
00:03:58,530 --> 00:04:00,720
is the number of interfaces that are going to be returned,

103
00:04:00,720 --> 00:04:02,430
whether you're saying a single interface,

104
00:04:02,430 --> 00:04:05,130
the active interfaces, or all the interfaces.

105
00:04:05,130 --> 00:04:07,140
Notice here I typed in ifconfig,

106
00:04:07,140 --> 00:04:09,930
and under en0 you can see inet6,

107
00:04:09,930 --> 00:04:12,060
which lists out my IPv6 address.

108
00:04:12,060 --> 00:04:14,700
And I see inet, which is my IPv4 address,

109
00:04:14,700 --> 00:04:18,269
which is 192.168.1.54.

110
00:04:18,269 --> 00:04:20,550
All the other information I need is there too.

111
00:04:20,550 --> 00:04:22,260
This includes things like my physical address

112
00:04:22,260 --> 00:04:24,600
or Mac address, which is listed as ether,

113
00:04:24,600 --> 00:04:26,520
my net mask or subnet mask,

114
00:04:26,520 --> 00:04:28,320
which is shown in hexadecimal equivalent,

115
00:04:28,320 --> 00:04:32,310
but it's still going to be equivalent to 255.255.255.0

116
00:04:32,310 --> 00:04:33,330
like you're used to.

117
00:04:33,330 --> 00:04:35,430
It's going to have the broadcast IP for this network

118
00:04:35,430 --> 00:04:37,350
and the fact that this network is up.

119
00:04:37,350 --> 00:04:38,790
As you can see, by default,

120
00:04:38,790 --> 00:04:41,940
ifconfig has more details than ipconfig does

121
00:04:41,940 --> 00:04:43,410
on a Windows client.

122
00:04:43,410 --> 00:04:45,030
Now, if you need additional details,

123
00:04:45,030 --> 00:04:48,450
you can enter ifconfig dash-v and then the interface.

124
00:04:48,450 --> 00:04:50,490
The dash-v stands for verbose,

125
00:04:50,490 --> 00:04:52,530
meaning tell me a lot about this thing.

126
00:04:52,530 --> 00:04:54,810
So you can see here I get a lot more details

127
00:04:54,810 --> 00:04:56,130
including the type of the connection,

128
00:04:56,130 --> 00:04:57,690
in this case, it's wifi,

129
00:04:57,690 --> 00:05:00,330
the speed of the transmission for the uplinks and downlinks,

130
00:05:00,330 --> 00:05:02,220
and if the quality of service is enabled or not.

131
00:05:02,220 --> 00:05:05,700
ifconfig can also be used to control the network connection

132
00:05:05,700 --> 00:05:07,920
and not simply display information about it.

133
00:05:07,920 --> 00:05:10,470
If, for example, I want to turn off that connection,

134
00:05:10,470 --> 00:05:12,510
I can use ifconfig down,

135
00:05:12,510 --> 00:05:14,550
and this will shut down the network interface.

136
00:05:14,550 --> 00:05:16,110
If I use ifconfig up,

137
00:05:16,110 --> 00:05:18,150
this will activate that network interface.

138
00:05:18,150 --> 00:05:20,250
If you're using static assignments on an interface,

139
00:05:20,250 --> 00:05:22,260
you first need to shut down that interface

140
00:05:22,260 --> 00:05:24,537
and then set the new address and subnet mask,

141
00:05:24,537 --> 00:05:26,550
and then you can activate the interface again

142
00:05:26,550 --> 00:05:28,770
by using ifconfig up.

143
00:05:28,770 --> 00:05:30,570
Remember, ifconfig down

144
00:05:30,570 --> 00:05:32,400
turns off your network interface card,

145
00:05:32,400 --> 00:05:33,750
and if you enter ifconfig up,

146
00:05:33,750 --> 00:05:36,420
it'll turn that network interface card back on.

147
00:05:36,420 --> 00:05:38,040
These are really important to remember

148
00:05:38,040 --> 00:05:39,960
because if you're not seeing any network connectivity

149
00:05:39,960 --> 00:05:41,520
on a Linux client or server,

150
00:05:41,520 --> 00:05:43,590
it could be that somebody mistakenly turned off

151
00:05:43,590 --> 00:05:44,610
that network card

152
00:05:44,610 --> 00:05:48,270
and you just need to enter ifconfig up to turn it back on.

153
00:05:48,270 --> 00:05:49,920
Now, as of this recording,

154
00:05:49,920 --> 00:05:52,350
ifconfig is considered officially deprecated,

155
00:05:52,350 --> 00:05:53,610
which means it's now considered to be

156
00:05:53,610 --> 00:05:55,170
obsolete in modern systems,

157
00:05:55,170 --> 00:05:57,270
and network administrators should instead be using

158
00:05:57,270 --> 00:05:59,550
the ip command, which has replaced it.

159
00:05:59,550 --> 00:06:02,520
That said, many systems still support ifconfig,

160
00:06:02,520 --> 00:06:04,800
at least for now, so you should still learn it

161
00:06:04,800 --> 00:06:07,020
in case you're working on an older system.

162
00:06:07,020 --> 00:06:09,000
Now, finally, we have ip.

163
00:06:09,000 --> 00:06:11,580
The ip command is going to be used to assign an address

164
00:06:11,580 --> 00:06:12,690
to a network interface

165
00:06:12,690 --> 00:06:14,550
or configure a network interface parameter

166
00:06:14,550 --> 00:06:17,850
on a Unix, Linux, or OSX operating system.

167
00:06:17,850 --> 00:06:19,260
ip is a newer tool

168
00:06:19,260 --> 00:06:22,440
and it was designed as a modern replacement for ifconfig.

169
00:06:22,440 --> 00:06:25,020
The ip command stands for internet protocol

170
00:06:25,020 --> 00:06:27,900
and it supports all the same functions as the if command.

171
00:06:27,900 --> 00:06:30,630
The ip command though can do a whole lot more.

172
00:06:30,630 --> 00:06:33,210
Now the ip command is actually an entire suite of tools

173
00:06:33,210 --> 00:06:35,850
that supports not just configuring your interface address,

174
00:06:35,850 --> 00:06:38,040
but also things like routing, creating tunnels,

175
00:06:38,040 --> 00:06:40,530
and much, much more that is way beyond the scope

176
00:06:40,530 --> 00:06:43,170
of this particular course and this exam.

177
00:06:43,170 --> 00:06:44,640
Now, instead, I want to focus

178
00:06:44,640 --> 00:06:47,760
on how we can replace the if command using what we learned

179
00:06:47,760 --> 00:06:51,000
with similar features inside of the ip command suite.

180
00:06:51,000 --> 00:06:52,440
Now first, if I want to display

181
00:06:52,440 --> 00:06:54,270
the configuration of my interfaces,

182
00:06:54,270 --> 00:06:58,860
I can simply enter ip space a instead of using ifconfig,

183
00:06:58,860 --> 00:07:01,110
and this is going to gimme the same type of information.

184
00:07:01,110 --> 00:07:04,770
The ip space a stands for ip space address

185
00:07:04,770 --> 00:07:06,990
inside of the ip suite of tools.

186
00:07:06,990 --> 00:07:08,490
Second, if I need to assign

187
00:07:08,490 --> 00:07:10,290
a static IP address to an interface,

188
00:07:10,290 --> 00:07:15,290
I can use ip space a space add the IP address space dev

189
00:07:15,480 --> 00:07:17,340
space whatever device I'm using.

190
00:07:17,340 --> 00:07:19,440
For example, this will set the IP address

191
00:07:19,440 --> 00:07:23,280
to the device interface known as eth0 or ethernet zero,

192
00:07:23,280 --> 00:07:27,240
as 192.168.1.123.

193
00:07:27,240 --> 00:07:29,430
Third, we can remove that static ip address

194
00:07:29,430 --> 00:07:33,690
by entering ip space a space del space ip address

195
00:07:33,690 --> 00:07:35,700
space dev space device,

196
00:07:35,700 --> 00:07:38,160
and that will be able to take out that ip address

197
00:07:38,160 --> 00:07:39,570
from that device.

198
00:07:39,570 --> 00:07:41,880
Now fourth, if we want to change our Mac address,

199
00:07:41,880 --> 00:07:44,610
we can conduct Mac spoofing simply by entering

200
00:07:44,610 --> 00:07:49,290
ip space link space set space dev space the device,

201
00:07:49,290 --> 00:07:52,325
in this case eth0, space address space,

202
00:07:52,325 --> 00:07:54,030
and the Mac address you want to use,

203
00:07:54,030 --> 00:07:59,030
in this case 00:11:22:33:44:55

204
00:07:59,040 --> 00:08:01,230
or whatever other Mac address you want to use.

205
00:08:01,230 --> 00:08:03,630
Fifth, if you want to make your network interface card

206
00:08:03,630 --> 00:08:05,310
operate in promiscuous mode,

207
00:08:05,310 --> 00:08:07,830
this will allow it to listen to all the traffic on a network

208
00:08:07,830 --> 00:08:10,710
and not just the traffic destined for its own Mac address.

209
00:08:10,710 --> 00:08:15,710
To do this, you can enter ip space link space set space dev

210
00:08:15,750 --> 00:08:18,360
space your device, eth0 in this case,

211
00:08:18,360 --> 00:08:20,970
space promisc space on.

212
00:08:20,970 --> 00:08:23,580
This is really useful if you're setting up a packet sniffer

213
00:08:23,580 --> 00:08:27,000
or a packet capture on a Linux client or a server.

214
00:08:27,000 --> 00:08:28,530
Finally, if you need to disable

215
00:08:28,530 --> 00:08:30,120
or enable a network interface,

216
00:08:30,120 --> 00:08:35,120
you can use ip space link space set space eth0 space down

217
00:08:35,760 --> 00:08:37,620
to turn off eth0,

218
00:08:37,620 --> 00:08:42,620
or ip link set eth0 up to turn it back on.

219
00:08:42,750 --> 00:08:44,580
Now we really only just scratched the surface

220
00:08:44,580 --> 00:08:46,230
of what the ip command can do,

221
00:08:46,230 --> 00:08:48,480
but if you're working heavily with Linux systems,

222
00:08:48,480 --> 00:08:50,010
I recommend you spend a little time

223
00:08:50,010 --> 00:08:51,720
learning more about the ip command

224
00:08:51,720 --> 00:08:53,730
and all the different functions it has.

225
00:08:53,730 --> 00:08:55,500
For this certification exam, though,

226
00:08:55,500 --> 00:08:57,570
we covered exactly what you need to know

227
00:08:57,570 --> 00:08:59,720
to make sure you're successful on test day.

