1
00:00:00,090 --> 00:00:01,920
In this lesson, we're going to do a quick review

2
00:00:01,920 --> 00:00:04,110
of the different specifications, limitations,

3
00:00:04,110 --> 00:00:07,380
considerations, and applications of network cables.

4
00:00:07,380 --> 00:00:09,780
First, let's consider the different specifications

5
00:00:09,780 --> 00:00:11,460
and limitations of our twisted pair

6
00:00:11,460 --> 00:00:15,210
of copper cables in terms of throughput, speed and distance.

7
00:00:15,210 --> 00:00:17,190
CAT 5, also known as fast ethernet

8
00:00:17,190 --> 00:00:20,880
or 100BASE-TX operates at 100 megabits per second

9
00:00:20,880 --> 00:00:23,070
at distance of up to a hundred meters.

10
00:00:23,070 --> 00:00:25,410
CAT 5e known as gigabit ethernet,

11
00:00:25,410 --> 00:00:29,100
or 1000BASE-T operates at 1000 megabits per second,

12
00:00:29,100 --> 00:00:33,390
or one gigabit per second at distance of up to 100 meters.

13
00:00:33,390 --> 00:00:37,320
CAT 6, also known as 1000BASE-T or 10GBASE-T

14
00:00:37,320 --> 00:00:39,510
can operate at 1000 megabits per second,

15
00:00:39,510 --> 00:00:41,820
or one gigabit per second at a distance up

16
00:00:41,820 --> 00:00:44,550
to a hundred meters, or it can reach speeds

17
00:00:44,550 --> 00:00:48,840
of 10 gigabits per second at a distance of up to 55 meters.

18
00:00:48,840 --> 00:00:52,770
Cat 6a and CAT 7 are also known as 10GBASE-T,

19
00:00:52,770 --> 00:00:55,440
and both of these operate at 10 gigabits per second

20
00:00:55,440 --> 00:00:57,780
at distance of up to a hundred meters.

21
00:00:57,780 --> 00:01:00,930
CAT 8 is also known as 40GBASE-T,

22
00:01:00,930 --> 00:01:03,600
and it operates at 40 gigabits per second at distance

23
00:01:03,600 --> 00:01:05,370
of up to 30 meters.

24
00:01:05,370 --> 00:01:07,890
Alright, let's consider the different specifications

25
00:01:07,890 --> 00:01:09,750
and limitations of our coaxial

26
00:01:09,750 --> 00:01:11,460
and twinaxial copper cables

27
00:01:11,460 --> 00:01:13,110
in terms of throughput, speed

28
00:01:13,110 --> 00:01:16,230
and distance, coaxial cables can support speeds of up

29
00:01:16,230 --> 00:01:18,480
to a hundred megabits per second at a distance of up

30
00:01:18,480 --> 00:01:21,390
to 500 meters when using ethernet.

31
00:01:21,390 --> 00:01:24,067
Now, coaxial cables can offer us this longer distance

32
00:01:24,067 --> 00:01:25,950
over a twisted pair cable,

33
00:01:25,950 --> 00:01:27,960
but they can't reach the higher speeds

34
00:01:27,960 --> 00:01:29,910
that twisted pair cables can reach in our modern

35
00:01:29,910 --> 00:01:30,930
networks.

36
00:01:30,930 --> 00:01:33,900
Twinaxial cables though can support higher speeds of up

37
00:01:33,900 --> 00:01:35,550
to 10 gigabits per second,

38
00:01:35,550 --> 00:01:37,110
but they're limited to a distance

39
00:01:37,110 --> 00:01:39,240
of only five meters or less.

40
00:01:39,240 --> 00:01:41,910
Newer twinaxial cables can also increase their speeds up

41
00:01:41,910 --> 00:01:44,550
to 100 gigabits per second at a maximum

42
00:01:44,550 --> 00:01:46,230
distance of seven meters.

43
00:01:46,230 --> 00:01:49,080
But again, these are not mainstream in use yet.

44
00:01:49,080 --> 00:01:51,420
Next, let's consider the different specifications

45
00:01:51,420 --> 00:01:53,460
and limitations of our fiber cables,

46
00:01:53,460 --> 00:01:54,960
in terms of throughput, speed

47
00:01:54,960 --> 00:01:59,040
and distance, 100BASE-FX operates at 100 megabits per

48
00:01:59,040 --> 00:02:00,330
second at distance of up

49
00:02:00,330 --> 00:02:03,450
to two kilometers using a multimode fiber.

50
00:02:03,450 --> 00:02:07,170
100BASE-SX is going to operate at 100 megabits per second

51
00:02:07,170 --> 00:02:11,100
at distance of up to 300 meters using a multimode fiber.

52
00:02:11,100 --> 00:02:14,580
1000BASE-SX is going to operate at 1000 megabits per second

53
00:02:14,580 --> 00:02:18,570
or one gigabit per second for distance of up to 220 meters

54
00:02:18,570 --> 00:02:22,050
to 500 meters or more using a multimode fiber.

55
00:02:22,050 --> 00:02:25,560
1000BASE-LX is going to operate at 1000 megabits per second

56
00:02:25,560 --> 00:02:28,020
or one gigabit per second at a distance of up

57
00:02:28,020 --> 00:02:31,050
to 550 meters using a multimode fiber

58
00:02:31,050 --> 00:02:32,490
and up to five kilometers

59
00:02:32,490 --> 00:02:34,620
if we're using a single mode fiber,

60
00:02:34,620 --> 00:02:38,580
now 10GBASE-SR is going to operate at 10 gigabits per second

61
00:02:38,580 --> 00:02:41,933
at distance of up to 400 meters using a multimode fiber.

62
00:02:41,933 --> 00:02:46,140
10GBASE-LR is going to operate at 10 gigabits per second

63
00:02:46,140 --> 00:02:47,940
at distance of up to 10 kilometers

64
00:02:47,940 --> 00:02:50,040
using a single mode fiber.

65
00:02:50,040 --> 00:02:53,250
Next, we need to discuss some cable considerations such

66
00:02:53,250 --> 00:02:57,150
as shielded versus unshielded and plenum versus riser rated.

67
00:02:57,150 --> 00:02:58,620
First, we have two types of

68
00:02:58,620 --> 00:03:00,360
twisted pair cable, shielded

69
00:03:00,360 --> 00:03:02,850
and unshielded, at their core, both shielded

70
00:03:02,850 --> 00:03:04,830
and unshielded twisted pair cables are created

71
00:03:04,830 --> 00:03:06,420
the exact same way.

72
00:03:06,420 --> 00:03:09,120
The only difference is that shielded twisted pair cables

73
00:03:09,120 --> 00:03:10,590
have each of their individual pairs

74
00:03:10,590 --> 00:03:12,990
of wires wrapped in a foil shielding.

75
00:03:12,990 --> 00:03:15,750
This gives them a little bit more protection from EMI.

76
00:03:15,750 --> 00:03:18,660
Then all four of those wrapped pairs are also wrapped

77
00:03:18,660 --> 00:03:21,840
with another foil layer for some additional protection.

78
00:03:21,840 --> 00:03:24,240
This extra shielding does help protect the shielded twisted

79
00:03:24,240 --> 00:03:26,610
pair cables from electromagnetic interference

80
00:03:26,610 --> 00:03:28,320
and power frequency interruptions,

81
00:03:28,320 --> 00:03:31,110
but it does add cost to it making shielded,

82
00:03:31,110 --> 00:03:34,320
twisted pair more expensive than unshielded twisted pair,

83
00:03:34,320 --> 00:03:35,940
so you really only use it

84
00:03:35,940 --> 00:03:38,490
for specific business cases and applications.

85
00:03:38,490 --> 00:03:40,890
For example, let's say you're running a network inside

86
00:03:40,890 --> 00:03:44,010
of a radio station or an airport, those areas are placed

87
00:03:44,010 --> 00:03:46,290
with a lot of electromagnetic interference,

88
00:03:46,290 --> 00:03:48,914
so you probably want to opt to use shielded twisted pair

89
00:03:48,914 --> 00:03:50,220
to provide the network with

90
00:03:50,220 --> 00:03:52,200
a little bit of extra protection.

91
00:03:52,200 --> 00:03:54,510
Additionally, if you're running a twisted pair network

92
00:03:54,510 --> 00:03:56,670
inside of a factory with heavy machinery

93
00:03:56,670 --> 00:03:58,890
or generators, it's also going to be a good idea

94
00:03:58,890 --> 00:04:00,750
to use shielded twisted pair here

95
00:04:00,750 --> 00:04:03,450
because there's extra frequencies of EMI

96
00:04:03,450 --> 00:04:05,550
that are going to be exposed to your cables.

97
00:04:05,550 --> 00:04:07,620
Now, if you're truly worried about electromagnetic

98
00:04:07,620 --> 00:04:10,290
interference or EMI though it would actually be a better

99
00:04:10,290 --> 00:04:12,630
idea to upgrade to a fiber based network

100
00:04:12,630 --> 00:04:15,420
because fiber cables are truly immune to EMI

101
00:04:15,420 --> 00:04:17,220
because they rely on light signals instead

102
00:04:17,220 --> 00:04:19,829
of electrical impulses to send their data.

103
00:04:19,829 --> 00:04:22,260
Now, unshielded twisted pair of cabling on the other hand,

104
00:04:22,260 --> 00:04:24,960
is also used in a lot of our local area networks

105
00:04:24,960 --> 00:04:28,080
because it's inexpensive, easy to install, lightweight,

106
00:04:28,080 --> 00:04:29,580
and really flexible.

107
00:04:29,580 --> 00:04:31,170
Regardless of whether you're going to use shielded

108
00:04:31,170 --> 00:04:33,780
twisted pair or unshielded twisted pair, you need

109
00:04:33,780 --> 00:04:35,970
to keep your cable lengths under the maximum recommended

110
00:04:35,970 --> 00:04:37,905
length of 100 meters.

111
00:04:37,905 --> 00:04:40,800
Next, we have to think about plenum versus

112
00:04:40,800 --> 00:04:42,300
riser rated cables.

113
00:04:42,300 --> 00:04:44,760
Now, plenum cables are going to be used when the cable is going to

114
00:04:44,760 --> 00:04:46,740
be run in the spaces between the ceiling

115
00:04:46,740 --> 00:04:49,350
and the floor above it, such as where you put your heating

116
00:04:49,350 --> 00:04:50,970
and air conditioning duct work.

117
00:04:50,970 --> 00:04:53,249
Now, these plenum cables have a higher fire rating

118
00:04:53,249 --> 00:04:56,130
and they're designed with fire retardant plastic jackets

119
00:04:56,130 --> 00:04:57,677
that use low smoke PVC

120
00:04:57,677 --> 00:05:01,830
or fluorinated ethanol polymer known as FEP.

121
00:05:01,830 --> 00:05:04,680
Now, usually plenum rated cables are going to be used when

122
00:05:04,680 --> 00:05:06,900
you're running cables horizontally in your building

123
00:05:06,900 --> 00:05:08,700
across a particular level.

124
00:05:08,700 --> 00:05:10,770
Riser cables, on the other hand, are going to be used

125
00:05:10,770 --> 00:05:12,450
to run network cables vertically

126
00:05:12,450 --> 00:05:15,630
between the floors in a building inside a cable riser

127
00:05:15,630 --> 00:05:17,370
or an elevator shaft.

128
00:05:17,370 --> 00:05:20,970
These riser cables are used in non plenum areas as well.

129
00:05:20,970 --> 00:05:23,760
These cables are built with special coatings that allow them

130
00:05:23,760 --> 00:05:24,780
to self extinguish,

131
00:05:24,780 --> 00:05:27,330
and they prevent the flame from burning through the cable

132
00:05:27,330 --> 00:05:29,760
and traveling upwards between the floors.

133
00:05:29,760 --> 00:05:31,980
Now, building codes are specific to the location

134
00:05:31,980 --> 00:05:33,900
of the building itself, and they're going to be determined

135
00:05:33,900 --> 00:05:36,240
by your state or county that you live in.

136
00:05:36,240 --> 00:05:37,860
In general, most fire

137
00:05:37,860 --> 00:05:39,930
and building codes will allow plenum cables

138
00:05:39,930 --> 00:05:42,810
to be used in both plenum and riser spaces,

139
00:05:42,810 --> 00:05:45,990
but riser cables can only be used in the risers

140
00:05:45,990 --> 00:05:47,879
and not in plenum spaces.

141
00:05:47,879 --> 00:05:52,500
This is because riser cables are not made from PVC or FEP,

142
00:05:52,500 --> 00:05:54,690
and therefore they can actually release chemicals

143
00:05:54,690 --> 00:05:57,750
and smoke into the air ducts if they caught fire.

144
00:05:57,750 --> 00:06:00,360
Finally, let's take a look at some cable applications you

145
00:06:00,360 --> 00:06:03,090
may come across when working as a network technician.

146
00:06:03,090 --> 00:06:04,650
These include things like rollover

147
00:06:04,650 --> 00:06:07,050
and console cables, crossover cables,

148
00:06:07,050 --> 00:06:08,910
and power over ethernet.

149
00:06:08,910 --> 00:06:11,250
Now, a rollover or console cable is a type

150
00:06:11,250 --> 00:06:12,960
of null modem cable that's used

151
00:06:12,960 --> 00:06:16,110
to connect a computer terminal to a router's console port.

152
00:06:16,110 --> 00:06:17,790
This cable is typically flat

153
00:06:17,790 --> 00:06:19,190
and has a light blue color to it

154
00:06:19,190 --> 00:06:21,990
to help you distinguish it from other networking cables.

155
00:06:21,990 --> 00:06:25,290
Typically, one side of the cable has an RJ 45 connector

156
00:06:25,290 --> 00:06:27,690
that's used to connect directly to a router's console port.

157
00:06:27,690 --> 00:06:30,090
The other side of the cable traditionally has a DB nine

158
00:06:30,090 --> 00:06:33,150
serial connection that'll connect to a laptop computer.

159
00:06:33,150 --> 00:06:35,210
This specialized cable is used to allow the technician

160
00:06:35,210 --> 00:06:37,020
to directly connect to the router

161
00:06:37,020 --> 00:06:38,932
and make changes to the configuration as a form

162
00:06:38,932 --> 00:06:41,220
of out-of-band communication.

163
00:06:41,220 --> 00:06:44,017
Now, a crossover cable is a special type of network cable

164
00:06:44,017 --> 00:06:46,860
that's used to connect two ethernet devices directly.

165
00:06:46,860 --> 00:06:48,630
So if you have two computers

166
00:06:48,630 --> 00:06:50,490
and you don't have a switch or router between them,

167
00:06:50,490 --> 00:06:52,950
you can use a crossover cable to connect them.

168
00:06:52,950 --> 00:06:54,930
They're also used to send and receive data

169
00:06:54,930 --> 00:06:58,080
by enabling complex data transfers between two computers,

170
00:06:58,080 --> 00:07:00,960
two routers, or two other network devices.

171
00:07:00,960 --> 00:07:02,970
Usually a crossover cable is created

172
00:07:02,970 --> 00:07:07,320
by using a TIA 568 B pinout on one side of the cable

173
00:07:07,320 --> 00:07:11,520
and the TIA 568 A pinout on the other side of the cable.

174
00:07:11,520 --> 00:07:14,070
If you need to connect a computer to a computer, a router

175
00:07:14,070 --> 00:07:16,050
to a router, a switch to a switch,

176
00:07:16,050 --> 00:07:17,854
then you're going to use a crossover cable.

177
00:07:17,854 --> 00:07:20,595
Now finally, we have power over ethernet.

178
00:07:20,595 --> 00:07:23,730
Power over ethernet, or POE is a technology

179
00:07:23,730 --> 00:07:26,610
that passes electrical power over a twisted pair of ethernet

180
00:07:26,610 --> 00:07:28,530
cables to power devices.

181
00:07:28,530 --> 00:07:31,260
Now, this can be done to go to a wireless access point,

182
00:07:31,260 --> 00:07:34,008
an IP camera or VoIP phone to give them data

183
00:07:34,008 --> 00:07:36,277
and power on the same cable.

184
00:07:36,277 --> 00:07:39,150
This enables one cable to give you both data

185
00:07:39,150 --> 00:07:41,730
and electrical power to these power devices instead

186
00:07:41,730 --> 00:07:43,650
of having to have a separate cable for each,

187
00:07:43,650 --> 00:07:45,720
make it really easy to install things like

188
00:07:45,720 --> 00:07:47,550
IP security cameras.

189
00:07:47,550 --> 00:07:49,560
To support power over ethernet, you need

190
00:07:49,560 --> 00:07:51,270
to have at least a category 5E

191
00:07:51,270 --> 00:07:53,430
or better copper twisted pair cable.

192
00:07:53,430 --> 00:07:55,290
Otherwise, it's not going to function right

193
00:07:55,290 --> 00:07:56,910
and it could be dangerous.

194
00:07:56,910 --> 00:08:00,690
Now, power over ethernet can provide 15.4 to 60 watts

195
00:08:00,690 --> 00:08:04,320
of power using two of the twisted pairs inside of the cable,

196
00:08:04,320 --> 00:08:06,630
or you can get 60 to a 100 watts

197
00:08:06,630 --> 00:08:08,370
of power if you're using all four

198
00:08:08,370 --> 00:08:10,380
of the twisted pairs inside of a cable.

199
00:08:10,380 --> 00:08:12,780
Just like other twisted pair cable installations,

200
00:08:12,780 --> 00:08:14,880
power over ethernet can only transmit data

201
00:08:14,880 --> 00:08:18,330
and power up to the maximum distance of 100 meters.

202
00:08:18,330 --> 00:08:20,199
Alright, I know that was a lot of information

203
00:08:20,199 --> 00:08:21,840
and I gave it to you really quick,

204
00:08:21,840 --> 00:08:24,180
but I hope you found this quick review of copper

205
00:08:24,180 --> 00:08:26,500
and fiber cables and all their different specifications,

206
00:08:26,500 --> 00:08:28,710
limitations, considerations,

207
00:08:28,710 --> 00:08:31,660
and applications helpful as you're preparing for your exam.

