1
00:00:00,792 --> 00:00:02,338
In this lesson,

2
00:00:02,338 --> 00:00:03,180
we're going to discuss the various fiber cable issues

3
00:00:03,180 --> 00:00:05,910
you may experience, such as incorrect transceivers,

4
00:00:05,910 --> 00:00:09,300
transmit receiver being reversed or dirty optical cables.

5
00:00:09,300 --> 00:00:11,220
Now, first we might experience issues

6
00:00:11,220 --> 00:00:12,960
with incorrect transceivers.

7
00:00:12,960 --> 00:00:14,550
A transceiver is a transmitter

8
00:00:14,550 --> 00:00:16,860
and a receiver in a single device.

9
00:00:16,860 --> 00:00:18,000
Transceivers are going to be used

10
00:00:18,000 --> 00:00:20,580
to convert a network connection from one type to another,

11
00:00:20,580 --> 00:00:23,340
and they work at layer one of the OSI model.

12
00:00:23,340 --> 00:00:25,403
In your routers and switches,

13
00:00:25,403 --> 00:00:27,390
it's common to use a transceiver for your fiber connections,

14
00:00:27,390 --> 00:00:29,730
but if you're going to be using the wrong transceiver,

15
00:00:29,730 --> 00:00:31,980
this connection simply won't work.

16
00:00:31,980 --> 00:00:34,530
Many transceivers are considered hot-pluggable,

17
00:00:34,530 --> 00:00:37,588
and they can be taken out and replaced without shutting down

18
00:00:37,588 --> 00:00:39,900
the associated router, switch or SAN device.

19
00:00:39,900 --> 00:00:42,270
If a transceiver fails and you need to replace it,

20
00:00:42,270 --> 00:00:43,650
this becomes quite easy

21
00:00:43,650 --> 00:00:45,900
since you can simply unplug the bad transceiver

22
00:00:45,900 --> 00:00:47,550
and plug in your replacement,

23
00:00:47,550 --> 00:00:50,340
but you need to ensure you're using the correct transceiver.

24
00:00:50,340 --> 00:00:52,200
Otherwise, you're going to have problems.

25
00:00:52,200 --> 00:00:54,840
If you put in the wrong type of SFP transceiver,

26
00:00:54,840 --> 00:00:56,070
you're going to have data loss

27
00:00:56,070 --> 00:00:58,320
and a loss of connectivity over time.

28
00:00:58,320 --> 00:01:00,120
Remember, transceivers are designed

29
00:01:00,120 --> 00:01:01,800
to support a certain type of connection

30
00:01:01,800 --> 00:01:03,450
and a certain type of cable.

31
00:01:03,450 --> 00:01:06,210
If you're using a longwave SFP transceiver,

32
00:01:06,210 --> 00:01:08,610
but then connect a shortwave fiber cable to them,

33
00:01:08,610 --> 00:01:09,723
that's not going to work.

34
00:01:10,872 --> 00:01:12,510
Therefore, if you have a device that's no longer working

35
00:01:12,510 --> 00:01:14,610
and you recently changed out your transceiver,

36
00:01:14,610 --> 00:01:16,080
you should go back and double check

37
00:01:16,080 --> 00:01:18,030
that you're using the right model for your device

38
00:01:18,030 --> 00:01:19,800
and your associated cabling.

39
00:01:19,800 --> 00:01:22,530
Next, we can sometimes have issues when our transmit

40
00:01:22,530 --> 00:01:24,690
and receive ends are being reversed.

41
00:01:24,690 --> 00:01:25,980
Now, while this may occur

42
00:01:25,980 --> 00:01:28,050
in a twisted pair network occasionally,

43
00:01:28,050 --> 00:01:29,820
this is really going to be the biggest issue

44
00:01:29,820 --> 00:01:31,950
inside your fiber-based networks.

45
00:01:31,950 --> 00:01:34,680
Remember, most of our fiber connections are going to consist

46
00:01:34,680 --> 00:01:37,800
of two individual cables, one for transmission of data,

47
00:01:37,800 --> 00:01:39,720
and one for receiving that data.

48
00:01:39,720 --> 00:01:41,460
For example, if you're connecting a switch

49
00:01:41,460 --> 00:01:43,860
to a workstation using a network interface card,

50
00:01:43,860 --> 00:01:45,660
that is ST connections on it,

51
00:01:45,660 --> 00:01:48,150
one of those is going to be labeled TX for transmit.

52
00:01:48,150 --> 00:01:50,670
The other one is going to be RX for receive.

53
00:01:50,670 --> 00:01:53,730
Now, if you connect the transmit cable to the RX connection

54
00:01:53,730 --> 00:01:55,920
and the receive cable to the TX connection,

55
00:01:55,920 --> 00:01:57,930
you're not going to get a valid link or connection

56
00:01:57,930 --> 00:01:58,763
to that switch.

57
00:01:59,908 --> 00:02:01,200
If this happens, you can quickly identify

58
00:02:01,200 --> 00:02:03,630
and fix this by simply disconnecting the TX

59
00:02:03,630 --> 00:02:06,720
and RX port cables and swapping those cables.

60
00:02:06,720 --> 00:02:08,100
Then when you do that,

61
00:02:08,100 --> 00:02:10,949
you can check the LED link activity lights on your NIC,

62
00:02:10,949 --> 00:02:12,750
and you're going to see the link is now online

63
00:02:12,750 --> 00:02:15,540
and available as indicated by a solid orange light

64
00:02:15,540 --> 00:02:17,340
or a blinking orange light if the network

65
00:02:17,340 --> 00:02:19,500
is actively communicating again.

66
00:02:19,500 --> 00:02:22,020
Finally, we have dirty optical cables.

67
00:02:22,020 --> 00:02:23,310
Dirty fiber optic cables

68
00:02:23,310 --> 00:02:25,740
and connectors can cause major performance issues

69
00:02:25,740 --> 00:02:28,110
or connection problems inside your network.

70
00:02:28,110 --> 00:02:30,510
A dirty fiber just means something is interfering

71
00:02:30,510 --> 00:02:32,910
with the clear optical connection between the cable,

72
00:02:32,910 --> 00:02:34,560
the connector, and the connection port

73
00:02:34,560 --> 00:02:36,060
for the fiber connection.

74
00:02:36,060 --> 00:02:38,130
Even something as small as some dust or dirt

75
00:02:38,130 --> 00:02:40,860
or your fingerprints can really severely block the light

76
00:02:40,860 --> 00:02:42,630
being sent down that cable.

77
00:02:42,630 --> 00:02:45,810
Now remember, multimode fibers are only 50

78
00:02:45,810 --> 00:02:47,880
to 62 microns in diameter,

79
00:02:47,880 --> 00:02:50,880
so it really doesn't take much to block these connections.

80
00:02:50,880 --> 00:02:53,070
If you find yourself with a dirty optical cable

81
00:02:53,070 --> 00:02:55,110
or connector, you really just need to clean it

82
00:02:55,110 --> 00:02:57,900
using a dry cleaning or wet cleaning method.

83
00:02:57,900 --> 00:03:00,240
Dry cleaning involves simply using light pressure

84
00:03:00,240 --> 00:03:03,240
while rubbing the end face of a fiber cable or connector

85
00:03:03,240 --> 00:03:06,180
using a dry cleaning cloth in one direction.

86
00:03:06,180 --> 00:03:08,310
This will usually be used when you need to clean dust

87
00:03:08,310 --> 00:03:10,350
or dirt off the face of a connector.

88
00:03:10,350 --> 00:03:11,940
This same technique can be used

89
00:03:11,940 --> 00:03:13,950
for a fiber connection port on a switch

90
00:03:13,950 --> 00:03:15,990
or network interface card too.

91
00:03:15,990 --> 00:03:18,150
Wet cleaning involves lightly moistening a piece

92
00:03:18,150 --> 00:03:21,150
of lint-free cloth with a fiber optic cleaning solution,

93
00:03:21,150 --> 00:03:22,830
and then wiping the end face of the cable

94
00:03:22,830 --> 00:03:24,720
in one direction as well.

95
00:03:24,720 --> 00:03:27,480
This cleaning solution should be 91% or higher

96
00:03:27,480 --> 00:03:30,720
isopropanol alcohol if you're using a solution.

97
00:03:30,720 --> 00:03:33,000
Now, wet cleaning is considered more invasive

98
00:03:33,000 --> 00:03:35,070
than dry cleaning, but it is useful

99
00:03:35,070 --> 00:03:37,470
when trying to remove oil residues or films

100
00:03:37,470 --> 00:03:39,210
off those cables and connectors,

101
00:03:39,210 --> 00:03:41,670
such as if somebody has put their fingerprints on them.

102
00:03:41,670 --> 00:03:42,840
You're going to have to use wet clean

103
00:03:42,840 --> 00:03:44,550
to get those fingerprints off.

104
00:03:44,550 --> 00:03:46,560
Now, if you start receiving a large amount

105
00:03:46,560 --> 00:03:48,300
of errors over a fiber connection

106
00:03:48,300 --> 00:03:50,220
or your performance begins to slow down,

107
00:03:50,220 --> 00:03:51,570
it could be the indication

108
00:03:51,570 --> 00:03:53,820
that you need to clean a dirty fiber.

109
00:03:53,820 --> 00:03:55,710
This can also be quantitatively determined

110
00:03:55,710 --> 00:03:57,540
if you're using a fiber light meter

111
00:03:57,540 --> 00:03:59,280
because you can compare the decibel reading

112
00:03:59,280 --> 00:04:02,583
from your baseline of a clean fiber versus this dirty fiber.

