1
00:00:00,000 --> 00:00:01,650
In this video, we're going to discuss

2
00:00:01,650 --> 00:00:02,483
routing issues

3
00:00:02,483 --> 00:00:04,290
that you may come across in your networks,

4
00:00:04,290 --> 00:00:05,880
including multicast flooding,

5
00:00:05,880 --> 00:00:08,400
asymmetrical routing, and missing routes.

6
00:00:08,400 --> 00:00:11,220
Now, first we're going to talk about multicast flooding.

7
00:00:11,220 --> 00:00:13,470
If you remember, multicast networks operate

8
00:00:13,470 --> 00:00:15,780
by sending out group communications that are addressed

9
00:00:15,780 --> 00:00:18,930
to a group of destination computers simultaneously.

10
00:00:18,930 --> 00:00:21,210
For this to work, the multicast message is sent

11
00:00:21,210 --> 00:00:22,920
to a single multicast address,

12
00:00:22,920 --> 00:00:25,920
and then the message can be distributed to the entire group.

13
00:00:25,920 --> 00:00:27,600
This is great most of the time,

14
00:00:27,600 --> 00:00:29,550
but sometimes things can malfunction

15
00:00:29,550 --> 00:00:31,740
and a multicast flood can occur.

16
00:00:31,740 --> 00:00:34,710
Now, multicast flooding happens when no specific host is

17
00:00:34,710 --> 00:00:37,466
associated with the multicast MAC address

18
00:00:37,466 --> 00:00:39,247
inside the CAM table of the switch.

19
00:00:39,247 --> 00:00:41,280
When this occurs, multitask traffic is going to be flooded

20
00:00:41,280 --> 00:00:42,840
throughout the entire local area network

21
00:00:42,840 --> 00:00:44,877
or VLAN, creating unnecessary traffic

22
00:00:44,877 --> 00:00:47,070
and wasting network resources.

23
00:00:47,070 --> 00:00:49,560
To prevent this issue, you need to configure your switch

24
00:00:49,560 --> 00:00:51,840
to block unknown multicast packets.

25
00:00:51,840 --> 00:00:53,460
Now for the exam, you don't need

26
00:00:53,460 --> 00:00:54,930
to know the specific commands on how

27
00:00:54,930 --> 00:00:57,120
to block multicast traffic on a switchboard,

28
00:00:57,120 --> 00:00:59,850
but you do need to know that blocking it will solve this

29
00:00:59,850 --> 00:01:01,830
type of multitask flood issue.

30
00:01:01,830 --> 00:01:04,200
Next, we have asymmetrical routing.

31
00:01:04,200 --> 00:01:07,050
Asymmetrical routing occurs when network packets leave via

32
00:01:07,050 --> 00:01:09,187
one path and they return via a different path.

33
00:01:09,187 --> 00:01:12,540
This can occur when traffic is flowing across two different

34
00:01:12,540 --> 00:01:15,930
layer two bridge pair interfaces on a router or a firewall,

35
00:01:15,930 --> 00:01:18,210
or when there's flows across different routers

36
00:01:18,210 --> 00:01:21,090
or firewalls in a high availability cluster.

37
00:01:21,090 --> 00:01:22,800
Now, if you're using load balancing

38
00:01:22,800 --> 00:01:26,517
and using a protocol like HSRP, asymmetric routing can occur

39
00:01:26,517 --> 00:01:28,710
and it's something you need to think about.

40
00:01:28,710 --> 00:01:30,690
This is a problem if you're using security devices

41
00:01:30,690 --> 00:01:33,660
and network appliances to perform deep packet inspection

42
00:01:33,660 --> 00:01:35,760
or you're using a stateful firewall

43
00:01:35,760 --> 00:01:38,850
because these devices need to see all the packets associated

44
00:01:38,850 --> 00:01:42,210
with a given packet flow, otherwise, issues happen.

45
00:01:42,210 --> 00:01:44,040
Now, well, modern routers will attempt

46
00:01:44,040 --> 00:01:46,080
to forward packets in a consistent next top

47
00:01:46,080 --> 00:01:47,550
for each packet in the flow.

48
00:01:47,550 --> 00:01:49,050
This only applies in one

49
00:01:49,050 --> 00:01:50,910
direction when they do their forwarding.

50
00:01:50,910 --> 00:01:53,760
Our routers will make no attempt in directing return traffic

51
00:01:53,760 --> 00:01:55,080
to the originating router

52
00:01:55,080 --> 00:01:56,970
because they only want to ensure the fastest

53
00:01:56,970 --> 00:01:59,250
and most efficient delivery of those packets.

54
00:01:59,250 --> 00:02:01,459
Now, this behavior presents problems for our firewalls

55
00:02:01,459 --> 00:02:03,600
and our security appliance clusters

56
00:02:03,600 --> 00:02:05,850
because they don't support asymmetric routing

57
00:02:05,850 --> 00:02:08,660
because of the set of cluster nodes all provide a path

58
00:02:08,660 --> 00:02:10,199
to the same networks.

59
00:02:10,199 --> 00:02:12,540
So routers forwarding packets to networks

60
00:02:12,540 --> 00:02:14,850
through the cluster can choose any of the cluster nodes

61
00:02:14,850 --> 00:02:18,533
as their next hop, and this causes asymmetric routing

62
00:02:18,533 --> 00:02:20,580
to occur, and the flow packets in one direction goes out a

63
00:02:20,580 --> 00:02:23,520
different node than what comes back in the return path.

64
00:02:23,520 --> 00:02:25,440
Because of this difference in packet flow,

65
00:02:25,440 --> 00:02:27,060
network traffic can be dropped by one

66
00:02:27,060 --> 00:02:28,830
or both of the firewalls in the cluster

67
00:02:28,830 --> 00:02:30,210
because they aren't seeing all the

68
00:02:30,210 --> 00:02:31,830
traffic from the packet flow.

69
00:02:31,830 --> 00:02:33,810
So how do we solve this problem?

70
00:02:33,810 --> 00:02:36,120
Well, the solution to this is to adjust the placement

71
00:02:36,120 --> 00:02:37,923
of your firewalls and internal routing so

72
00:02:37,923 --> 00:02:40,320
that the traffic will flow in both directions

73
00:02:40,320 --> 00:02:41,670
to the same firewall,

74
00:02:41,670 --> 00:02:44,100
even if the incoming traffic is entering the networks

75
00:02:44,100 --> 00:02:45,690
through a different router than the router

76
00:02:45,690 --> 00:02:47,970
that handled the matching outgoing traffic.

77
00:02:47,970 --> 00:02:50,342
Essentially, we need to put all of our firewalls closer

78
00:02:50,342 --> 00:02:53,250
to the systems they're protecting instead of at the edge

79
00:02:53,250 --> 00:02:54,840
of the network, and this will avoid

80
00:02:54,840 --> 00:02:56,640
asymmetric routing problems.

81
00:02:56,640 --> 00:02:58,920
Remember, asymmetric routing doesn't cause

82
00:02:58,920 --> 00:03:00,660
any routing issues necessarily,

83
00:03:00,660 --> 00:03:02,970
but they do cause issues with drop packet flows

84
00:03:02,970 --> 00:03:05,010
because our security devices like firewalls

85
00:03:05,010 --> 00:03:07,230
and unified threat management system need to be able

86
00:03:07,230 --> 00:03:08,880
to see the entire flow.

87
00:03:08,880 --> 00:03:10,680
So you need to consider the design

88
00:03:10,680 --> 00:03:11,940
of your network architecture

89
00:03:11,940 --> 00:03:13,770
to prevent this issue from occurring.

90
00:03:13,770 --> 00:03:16,289
If you don't, then packet flow drops are going to occur

91
00:03:16,289 --> 00:03:18,330
and your clients can experience network

92
00:03:18,330 --> 00:03:20,070
intermittent connectivity.

93
00:03:20,070 --> 00:03:22,740
Finally, we need to talk about missing routes.

94
00:03:22,740 --> 00:03:25,080
Now, missing routes occur when a router cannot reach a

95
00:03:25,080 --> 00:03:27,060
destination because there's a missing route

96
00:03:27,060 --> 00:03:28,710
inside the routing table.

97
00:03:28,710 --> 00:03:30,510
These missing routes can occur for lots

98
00:03:30,510 --> 00:03:31,980
of different reasons depending on

99
00:03:31,980 --> 00:03:33,870
what routing protocol is being used to share

100
00:03:33,870 --> 00:03:35,430
that routing information.

101
00:03:35,430 --> 00:03:37,290
Now, missing routes are commonly found

102
00:03:37,290 --> 00:03:39,660
as an issue when network administrators are using static

103
00:03:39,660 --> 00:03:42,690
routes and manually adding them to the routing tables.

104
00:03:42,690 --> 00:03:44,340
If the administrator mistypes a route

105
00:03:44,340 --> 00:03:46,740
or the command, the proper route will not get added

106
00:03:46,740 --> 00:03:48,827
to the routing table, and this causes problems.

107
00:03:48,827 --> 00:03:51,206
So if you suspect you're missing a route,

108
00:03:51,206 --> 00:03:54,540
you should enter the show ip route command from the command

109
00:03:54,540 --> 00:03:55,920
line interface of your switch,

110
00:03:55,920 --> 00:03:58,380
and that'll display the routes available to it.

111
00:03:58,380 --> 00:04:00,180
Now, if you're working on a Windows client

112
00:04:00,180 --> 00:04:02,539
or server, you can enter the route print command

113
00:04:02,539 --> 00:04:04,980
to see the routing table for your system.

114
00:04:04,980 --> 00:04:07,883
If you're using dynamic routing protocols like OSPF

115
00:04:07,883 --> 00:04:09,600
or BGP, there may also be issues

116
00:04:09,600 --> 00:04:11,550
where the routers are not properly establishing their

117
00:04:11,550 --> 00:04:13,830
neighbor states, and this can cause the routers

118
00:04:13,830 --> 00:04:16,860
to not reach convergence across their routing tables.

119
00:04:16,860 --> 00:04:18,534
To troubleshoot this kind of issue, you need

120
00:04:18,534 --> 00:04:20,950
to verify the dynamic routing protocol is enabled

121
00:04:20,950 --> 00:04:23,670
and that the two routers can communicate with each other.

122
00:04:23,670 --> 00:04:26,370
To verify this, you should run the ping command from one

123
00:04:26,370 --> 00:04:27,970
router to the destination router

124
00:04:28,846 --> 00:04:30,270
and validate the connectivity exists.

125
00:04:30,270 --> 00:04:32,190
If you identify that a router is missing,

126
00:04:32,190 --> 00:04:34,650
you can statically add that route from the command line,

127
00:04:34,650 --> 00:04:36,600
or you can work with a network administrator

128
00:04:36,600 --> 00:04:39,360
or network engineer to troubleshoot the underlying dynamic

129
00:04:39,360 --> 00:04:42,110
routing protocols that are being used by these routers.

