1 00:00:00,475 --> 00:00:05,722 In the previous section, we already learn about dynamic routing eigrp. 2 00:00:06,381 --> 00:00:11,929 Next in this section, we are going learn about dynamic routing ospf. 3 00:00:12,783 --> 00:00:18,215 But before that, let’s setup the topology first, as always, 4 00:00:18,215 --> 00:00:21,372 we will learn ospf with 2 router first. 5 00:00:21,948 --> 00:00:30,216 So here let’s import 2 router, and let’s also import 2 pc. Let’s change the name, 6 00:00:30,566 --> 00:00:33,836 this is router 2 and this is router 1. 7 00:00:34,700 --> 00:00:39,498 This is pc 2, and this is pc 1. 8 00:00:47,143 --> 00:00:56,066 Let’s connecting router 1 to router 2, router 1 to pc 1, and router 2 to pc 2. 9 00:00:57,000 --> 00:01:09,416 For ip addressing, here router 1, the ip address is 10.10.10.1/24, here 10.10.10.2/24, 10 00:01:11,351 --> 00:01:22,388 router 1 that connected to pc 1 is 192.168.1.1/24, pc1 192.168.1.2/24, 11 00:01:24,662 --> 00:01:35,384 router 2 that connected to pc2 is 192.168.2.1/24, and pc2 192.168.2.2/24. 12 00:01:36,516 --> 00:01:44,091 Okay now let’s configure the ip address on all router and pc. Let’s start with router 1. 13 00:01:47,446 --> 00:02:00,565 No, enable, configure terminal, let’s start with fa0/0, so interface fa0/0, no shutdown, 14 00:02:01,192 --> 00:02:08,418 the ip address is 10.10.10.1 255.255.255.0, 15 00:02:09,364 --> 00:02:23,432 Next for fa0/1, interface fa0/1, no shutdown, ip address 192.168.1.1 255.255.255.0. 16 00:02:24,513 --> 00:02:30,646 Okay now we have done on router 1, next let’s configure router 2. 17 00:02:31,778 --> 00:02:40,496 No, enable, configure terminal, let’s start with fa0/0, interface fa0/0, no shutdown, 18 00:02:41,957 --> 00:02:56,605 ip address 10.10.10.2 255.255.255.0, next for fa0/1, interface fa0/1, no shutdown, 19 00:02:58,138 --> 00:03:04,466 ip address 192.168.2.1 255.255.255.0 20 00:03:05,784 --> 00:03:12,935 Okay now we have done configuring ip address on router 1 and router 2, next let’s configure 21 00:03:12,935 --> 00:03:24,540 the ip address on pc 1 and pc 2, let’s start with pc 1, the ip address is 192.168.1.2 22 00:03:26,187 --> 00:03:30,093 and the gateway is 192.168.1.1, 23 00:03:31,060 --> 00:03:43,056 Next for pc 2, the ip address is 192.168.2.2 and the gateway is 192.168.2.1 24 00:03:44,043 --> 00:03:49,184 Okay now we have done configuring ip address on all router and pc. 25 00:03:49,750 --> 00:03:57,059 I think enough for this video. In the next video, we are going to configure dynamic routing ospf 26 00:03:57,265 --> 00:04:01,896 so pc 1 and pc 2 will able to communicate each others. 27 00:04:02,503 --> 00:04:06,102 Thankyou for watching and see you on the next video.