1 00:00:00,580 --> 00:00:07,546 In the previous video, we have done looping to do configuration on multiple router at once. 2 00:00:08,202 --> 00:00:13,895 Next in this video, we are going to learn about write configuration. 3 00:00:14,530 --> 00:00:20,413 Remember that in cisco, the configuration is not saved automatically. 4 00:00:21,000 --> 00:00:22,371 Let’s check here, 5 00:00:26,821 --> 00:00:30,666 do show ip interface brief exclude unassign. 6 00:00:32,050 --> 00:00:39,272 Here we can see that we have loopback0 until 2, but we don’t save this configuration yet. 7 00:00:40,034 --> 00:00:48,089 If the router is suddenly restart or shutdown, the configuration will be gone. Let’s try, 8 00:00:48,514 --> 00:00:52,467 stop the router, and then start again. 9 00:01:00,265 --> 00:01:06,472 Let’s see the interface again, do show ip interface brief exclude unassign. 10 00:01:08,892 --> 00:01:18,106 Here we can see that loopback0 until 3 is gone. But fa0/0 is not gone, 11 00:01:18,610 --> 00:01:27,256 why? This is because we already save the configuration after configuring fa0/0, 12 00:01:27,996 --> 00:01:35,823 so the last time we save the configuration is after configuring fa0/0 and ssh. 13 00:01:36,543 --> 00:01:42,211 After configuring loopback0 until 3, we don’t save the configuration yet. 14 00:01:42,728 --> 00:01:53,043 This is why loopback0 until 3 is gone. But configuration on fa0/0 and ssh is not gone. 15 00:01:54,720 --> 00:02:05,002 Let’s check it, ssh cisco@10.10.10.5, this is the ip address of router 5, 16 00:02:05,608 --> 00:02:14,501 Okay this is success, so the configuration on fa0/0 and ssh is still exists. 17 00:02:15,263 --> 00:02:20,021 But the configuraiton of loopback0 until 2 is gone. 18 00:02:20,960 --> 00:02:29,052 Okay, so now, let’s add the script to save the configuration. So here after configuring the 19 00:02:29,052 --> 00:02:36,653 loopback, let’s save the configuration Here let’s add the command, do write. 20 00:02:41,040 --> 00:02:50,423 Change the interface, let’s configure loopback3, the ip address is 10.4.1.x, save. 21 00:02:51,465 --> 00:02:53,891 Let’s execute the script again. 22 00:03:00,063 --> 00:03:02,120 Just enter enter here. 23 00:03:04,585 --> 00:03:11,600 Okay here we can see that we in router 1, we success to save the configuration, 24 00:03:12,118 --> 00:03:16,639 but in router 2, we are not success to save the configuration, 25 00:03:19,141 --> 00:03:26,666 router 3 success, router 4 success, router 5 is also not success. 26 00:03:27,318 --> 00:03:33,148 This is because we forget to use time sleep after do write. 27 00:03:33,768 --> 00:03:40,232 Let’s put time sleep here, let’s say we will stop the program for 2 second. 28 00:03:41,040 --> 00:03:49,078 Save, execute the script again, enter enter here. 29 00:03:54,366 --> 00:03:58,702 Router 1 is success, so here configuring loopback, 30 00:04:01,427 --> 00:04:06,914 do write is success, and we can see the result of show interface. 31 00:04:07,608 --> 00:04:14,880 router 2 is still failed to save the configuration. Router 3 is also failed, router 4 is 32 00:04:14,880 --> 00:04:26,198 success, router 5 is also failed. And also the show is not success. so the time sleep is not enough. 33 00:04:26,894 --> 00:04:32,089 Let’s edit the script again, let’s change this become 3, and then in the show interface, 34 00:04:32,450 --> 00:04:42,000 let’s change this to 1, save, execute the script again, enter enter here. 35 00:04:46,800 --> 00:04:58,616 Router 1 is success, router 2 is success, router 3 is success, 36 00:05:00,601 --> 00:05:02,523 router4 is success, 37 00:05:06,000 --> 00:05:09,271 and router 5 is also success. 38 00:05:10,067 --> 00:05:14,152 Okay so now we are success to save the configuration. 39 00:05:15,814 --> 00:05:25,739 Let’s check it, let’s say router 5, show ip interface brief exclude unassign. 40 00:05:28,434 --> 00:05:31,390 Here we can see that we have loopback3, 41 00:05:31,852 --> 00:05:38,080 Shutdown the router, and then start again. 42 00:05:46,737 --> 00:05:54,725 Now let’s check the interface again, do show ip interface brief exclude unassign. 43 00:05:57,090 --> 00:06:01,030 Here we can see that the loopback3 is still exist. 44 00:06:01,688 --> 00:06:04,889 Okay I think enough for this video. 45 00:06:04,889 --> 00:06:08,650 Thank you for watching and see you on the next video.