1 00:00:00,477 --> 00:00:06,127 In the previous video, we have done create a script to remote multiple router at once 2 00:00:06,127 --> 00:00:07,670 using netmiko. 3 00:00:08,465 --> 00:00:13,238 But the script is only to show interface on each router. 4 00:00:14,264 --> 00:00:20,402 Now in this video, we are going to do configuration on all router at once. 5 00:00:21,366 --> 00:00:26,730 Let’s say we will try to create loopback interface on each router. 6 00:00:27,988 --> 00:00:31,564 Let’s move this script before show ip interface brief. 7 00:00:32,457 --> 00:00:33,834 Uncomment this. 8 00:00:36,413 --> 00:00:45,845 Okay so here let’s say we will create 2 loopback interface on each router, loopback0 9 00:00:45,845 --> 00:00:52,386 and loopback1, and then let’s just remove do show ip interface brief. 10 00:00:53,127 --> 00:00:57,732 Because we already show interface brief using send_command. 11 00:00:58,973 --> 00:01:04,135 And then let’s change the ip address of loopback based on n. 12 00:01:05,153 --> 00:01:12,506 Let’s say the ip address of loopback 0 will be 10.1.1 and then the last number will be 13 00:01:12,506 --> 00:01:20,438 based on n. so here we need to use f string, and then change this to n. 14 00:01:21,714 --> 00:01:29,808 Let’s also change the ip address of loopback1, let’s say the ip address is 10.2.2.n, we 15 00:01:30,701 --> 00:01:33,253 also need to use f string here. 16 00:01:34,467 --> 00:01:40,672 Okay, next we send this config to the router using send_config_set. 17 00:01:41,850 --> 00:01:47,185 After configuring the loopback, we send a command to show interface, 18 00:01:53,094 --> 00:02:00,318 Here we print the divider, let’s move this divider before print the first output. 19 00:02:04,254 --> 00:02:06,115 Let’s also move this script. 20 00:02:08,757 --> 00:02:14,353 Let’s just change this to Router and then the ip address of the router. 21 00:02:15,531 --> 00:02:25,698 Okay we have done here, save, back to the terminal, and then let’s execute the script. 22 00:02:28,626 --> 00:02:51,552 Router 1 success, router 2 success, router 3 success, router 4 success, and router 5 is also succes. 23 00:02:52,150 --> 00:02:58,550 Okay so now we are success to configure multiple router at once using netmiko 24 00:02:59,540 --> 00:03:01,790 I think enough for this video. 25 00:03:02,040 --> 00:03:05,298 Thank you for watching and see you on the next video.