1 00:00:00,600 --> 00:00:06,120 In this video, we are going to learn how to connect the mikrotik router and Cisco router 2 00:00:06,140 --> 00:00:14,920 to our computer. If we look at this topology, note that the computer is connected to a switch, 3 00:00:15,440 --> 00:00:23,600 then the mikrotik and Cisco router are also connected to the switch. Later we will configure 4 00:00:23,740 --> 00:00:34,800 the ip address 192.168.1.1 on the computer, 192.168.1.2 on the mikrotik, and 192.168.1.3 5 00:00:34,800 --> 00:00:45,120 on cisco. Here we know that mikrotik and cisco are on gns3, meaning we need to create a virtual 6 00:00:45,220 --> 00:00:55,560 interface on our computer, why? Because gns3 is virtual, so we must make a virtual interface 7 00:00:55,620 --> 00:01:01,480 on our computer to connecting our computer with router on gns3. 8 00:01:02,660 --> 00:01:13,299 To create a virtual interface, you can enter start, then type hdwwiz, this stands for hardware 9 00:01:13,300 --> 00:01:32,640 wizard. next, here, chose recommended, next, next, choose network adapters, , select Microsoft 10 00:01:32,760 --> 00:01:47,940 on the left, and on the right, choose loopback adapter, next, next, and finish. 11 00:01:48,940 --> 00:01:56,420 After create a virtual interface, we need to restart our computer. But before that let’s 12 00:01:56,420 --> 00:01:59,760 save our project on gns3 first. 13 00:02:04,340 --> 00:02:12,280 Okay, I'm done restarting my computer. To prove that our virtual interface is already up 14 00:02:12,280 --> 00:02:20,800 We can enter the open network and sharing center. Then change adapter settings 15 00:02:22,080 --> 00:02:30,020 here we can see that we have Microsoft loopback adapter, which is the Local area connection 2 16 00:02:30,030 --> 00:02:37,960 Now let’s configure the ip address for this interface. According to our topology, 17 00:02:37,960 --> 00:02:42,400 the IP Address is 192.168.1.1. 18 00:02:50,900 --> 00:03:04,120 Next, let’s open our project on gns3. enter the project library, select our project, then ok 19 00:03:06,940 --> 00:03:14,640 Okay here we see mikrotik and cisco router. Next we need to import a cloud 20 00:03:15,560 --> 00:03:25,920 the cloud will act as our computer. We also need to import an Ethernet switch. 21 00:03:27,740 --> 00:03:36,320 Next we need to configure this cloud to act as our computer. Right click on it, and choose configure 22 00:03:37,460 --> 00:03:42,400 Here we have to check show special Ethernet interface 23 00:03:43,020 --> 00:03:53,120 Here select local area connection 2, local area connection 2 is our loopback adapter interface. Then choose add 24 00:03:53,120 --> 00:03:59,280 and okay. Finally, let’s connect the cable from our computer to the switch 25 00:04:01,600 --> 00:04:14,360 from the switch to the mikrotik, from Cisco to the switch. Now let’s turn on the mikrotik & cisco router 26 00:04:20,580 --> 00:04:27,520 if the cpu usage reach 100%, we can do auto idle pc on Cisco router. 27 00:04:36,220 --> 00:04:43,200 Now let’s try to configure the IP address on the mikrotik and Cisco router, but before 28 00:04:43,200 --> 00:04:49,880 that it is strongly recommended to look at the interface that is installed on the mikrotik 29 00:04:49,880 --> 00:04:58,420 and Cisco, by clicking this icon, here we can see that the mikrotik is in Ether 0 30 00:04:58,640 --> 00:05:06,820 but the interface naming on mikrotik router is started from ethernet1, so ether 0 here means 31 00:05:06,820 --> 00:05:14,360 ether1, then on the cisco, the interface is fa0 / 0. 32 00:05:14,360 --> 00:05:19,400 Ok, let’s configure the ip address on the mikrotik router first. 33 00:05:23,380 --> 00:05:38,760 The mikrotik ip address will be 192.168.1.2. Next let’s configure the ip address on the Cisco router. 34 00:05:42,120 --> 00:05:47,920 The ip address of cisco router will be 192.168.1.3. 35 00:05:57,160 --> 00:06:02,800 Now, let’s try to ping from our computer to the Mikrotik and Cisco router. 36 00:06:03,000 --> 00:06:13,820 Open the command prompt, let’s ping the mikrotik first, which is 192.168.1.2, okay it works, 37 00:06:14,460 --> 00:06:27,900 then let’s try ping to the Cisco router. Okay, it also works. Now we have successfully 38 00:06:27,900 --> 00:06:31,960 connected our computer with Cisco and Mikrotik routers. 39 00:06:32,740 --> 00:06:39,220 In the next video, we are going to learn how to configure ssh on mikrotik & cisco. 40 00:06:39,520 --> 00:06:43,160 Thankyou for watching and see you on the next video