1 00:00:00,454 --> 00:00:04,929 In the previous video, we have done configuring telnet in the router. 2 00:00:05,482 --> 00:00:12,113 But if we see here, we only need to type password when remote the router using telnet. 3 00:00:12,647 --> 00:00:15,000 We don’t need to use username. 4 00:00:15,800 --> 00:00:16,490 Why? 5 00:00:16,703 --> 00:00:22,959 This is because, when we configure telnet, we use command login like this. 6 00:00:23,880 --> 00:00:30,445 So remember that if we use command login like this, we will only need to type password when 7 00:00:30,445 --> 00:00:33,096 remote the cisco devices using telnet. 8 00:00:33,648 --> 00:00:35,661 We don’t need a username. 9 00:00:36,679 --> 00:00:43,450 The question is, how we can configure so when we remote the route using telnet, 10 00:00:43,799 --> 00:00:46,609 we will need to type username and password? 11 00:00:48,373 --> 00:00:50,531 Okay let’s just try it. 12 00:00:50,957 --> 00:00:55,995 The first thing that we need to do is, create a username and password. 13 00:00:56,887 --> 00:01:05,129 The command is username and the the user, let’s say I create user1, then secret, 14 00:01:05,352 --> 00:01:09,888 and the password, let’s say the password is password1. 15 00:01:10,838 --> 00:01:15,274 So the username is user1 and the password is password1. 16 00:01:16,689 --> 00:01:23,401 Next let’s go to line vty again, and then let’s type login local. 17 00:01:24,060 --> 00:01:28,823 This command means that if we want to remote the router using telnet, 18 00:01:29,017 --> 00:01:31,500 we need to type username and password. 19 00:01:32,120 --> 00:01:37,210 In this case the username will be user1 and the password is password1, 20 00:01:39,479 --> 00:01:48,704 Now let’s try from the pc, here open telnet or ssh client. 21 00:01:49,296 --> 00:01:54,059 Choose telnet, type the router Ip address and then connect. 22 00:01:55,213 --> 00:02:01,453 Okay here we can see that now we need to type username, the username is user1, 23 00:02:02,742 --> 00:02:05,431 and then here we need to type the password. 24 00:02:05,858 --> 00:02:08,119 The password is password1. 25 00:02:09,312 --> 00:02:13,168 Okay here we are successfully remote the router using telnet. 26 00:02:13,672 --> 00:02:19,046 And now we need to type username and password when remote the router using telnet. 27 00:02:20,336 --> 00:02:28,350 May be some of you have a question, how If we want to have not just 1 user, is that possible? 28 00:02:29,183 --> 00:02:31,724 Yes absolutely, let’s try it. 29 00:02:32,354 --> 00:02:39,324 Here let’s create new user name, let’s say the user is user2 and the password is 30 00:02:39,324 --> 00:02:40,302 password2. 31 00:02:42,813 --> 00:02:46,316 To verify it, we can use do show run. 32 00:02:50,747 --> 00:02:57,465 Okay here we can see that now we have 2 user, which is user1 and user2. 33 00:02:58,318 --> 00:03:02,560 Now let’s try to login using telnet from other client. 34 00:03:03,200 --> 00:03:10,424 Open telnet or ssh client, here choose telnet, put the ip address of the router, 35 00:03:10,657 --> 00:03:18,000 and then connect, okay here we can type the username, let’s say we will use user2, 36 00:03:18,659 --> 00:03:21,228 and then the password is password2. 37 00:03:25,542 --> 00:03:30,774 Okay here we can see that now we are success to login using user2. 38 00:03:32,451 --> 00:03:34,940 Okay I think enough for this video 39 00:03:35,270 --> 00:03:38,398 Thankyou for watching and see you on the next video.