WEBVTT 00:00.680 --> 00:05.210 So now we're on the last step to fix the problems and run Carly. 00:06.200 --> 00:12.620 Now, in this lecture, I will assume that you do have trouble with network connections and I'm going 00:12.620 --> 00:15.980 to give you some solutions so that you can fix the problem. 00:18.080 --> 00:24.470 Now, hopefully you're not facing such a problem, so if you don't have a network situation, please, 00:24.470 --> 00:27.980 you don't have to apply any of these solutions in this lesson. 00:27.980 --> 00:33.320 But it's good to have you on the ride and you can always sharpen your troubleshooting skills. 00:34.680 --> 00:40.440 So first off, let's reboot the machine to understand whether the problem is an exception for the initial 00:40.440 --> 00:41.060 run or not. 00:41.990 --> 00:48.050 So I shut down the virtual machine because I want to look at the settings of now select Caleigh and 00:48.350 --> 00:55.310 click the settings button and click this system tab, I want to make the RAM three gigabytes. 00:58.040 --> 01:01.190 So now I can click the start button to boot it again. 01:07.950 --> 01:10.380 Username and password are both Kelly. 01:14.860 --> 01:21.460 OK, we are in again, so let's check the network connection by clicking the network icon at the upper 01:21.460 --> 01:22.390 right hand corner. 01:23.020 --> 01:26.190 So I think there's a problem on the DHC of the VMM. 01:26.470 --> 01:29.570 Well, anyway, we can live without DHP as well. 01:31.000 --> 01:33.090 So I'm looking at the Wired network. 01:33.640 --> 01:34.450 Don't be confused. 01:34.450 --> 01:40.150 Even though you share the wireless connection of your host machine, it's simulated as a wired network 01:40.150 --> 01:40.810 in the VM. 01:41.950 --> 01:45.310 So let's open a terminal screen and look at the networking service. 01:45.310 --> 01:52.240 If it's running right service networking and press tab twice to see the available commands of the service. 01:53.230 --> 01:59.710 Networking service does not have status command, so I'll assume that it's not started and try to start 01:59.710 --> 01:59.800 it. 02:02.990 --> 02:09.020 And if you are still not connected at this point, let's go to network settings, you can go to network 02:09.020 --> 02:12.710 settings via advanced network settings under the menu. 02:17.460 --> 02:23.580 Or you can right click on the network icon in the upper right corner and select edit connections. 02:25.540 --> 02:28.870 Now click the wheel icon under the wire tab. 02:28.900 --> 02:36.610 OK, OK, I go to the IPV for tab to set the IP manually, click the manual option. 02:37.180 --> 02:38.800 I'll choose an IP for the new COLLY. 02:39.950 --> 02:48.560 Now, the IP block of my virtual network is 10 zero two zero through 24, so I'll choose an IP from 02:48.560 --> 02:49.160 this block. 02:49.970 --> 02:56.930 Net mask is 255 255 255 zero for 24 IP block. 02:59.000 --> 03:02.180 The gateway is 10 zero, not two to. 03:03.720 --> 03:08.880 So I can use a Google DNS is my DNS server, and right now you can click the Saban. 03:10.620 --> 03:14.250 OK, I'll reboot the machine to be sure that the changes are applied. 03:26.650 --> 03:27.250 Completed. 03:28.630 --> 03:35.050 So open the terminal screen and first type pseudo as you just switch the user to route so that you don't 03:35.050 --> 03:41.560 have to write pseudo for every command that requires privileges and then run the F config command to 03:41.560 --> 03:44.170 see the IP address of Caleigh. 03:45.090 --> 03:46.170 And it's 200. 03:47.650 --> 03:53.950 So let's ping a remote system, for example, Google DNS eight eight eight eight eight. 03:55.550 --> 04:01.220 Yes, we received the response packages, and that works OK now, so to double check, open a browser 04:01.250 --> 04:02.810 and visit any Web site.