WEBVTT

0:00:02.640000 --> 0:00:07.860000
 In this video, we're going to take a
 look at multiple directors and why

0:00:07.860000 --> 0:00:12.280000
 we might have multiple directories
 in our environment.

0:00:12.280000 --> 0:00:14.720000
 Let's take a look at what we're
 going to take a look at.

0:00:14.720000 --> 0:00:19.500000
 We start out looking at the architecture
 of implementing multiple directories,

0:00:19.500000 --> 0:00:21.880000
 which is actually really
 pretty straightforward.

0:00:21.880000 --> 0:00:27.140000
 Then I want to go ahead and demonstrate
 the process of provisioning multiple

0:00:27.140000 --> 0:00:30.940000
 directories, or at least provisioning
 one extra directory.

0:00:30.940000 --> 0:00:36.800000
 Before we go into the details of it,
 I want to map it out just a little

0:00:36.800000 --> 0:00:45.860000
 bit so we get a good feeling for
 what multiple directories work.

0:00:45.860000 --> 0:00:48.760000
 I'm going to start out
 with an account.

0:00:48.760000 --> 0:00:51.840000
 Now, this could be a
 Microsoft account.

0:00:51.840000 --> 0:00:55.060000
 It could be an enterprise account if
 you've got an enterprise agreement.

0:00:55.060000 --> 0:00:56.040000
 But I have an account.

0:00:56.040000 --> 0:01:03.660000
 This is separate from Azure AD.

0:01:03.660000 --> 0:01:08.480000
 Then I am going to simply, initially,
 in order to use Azure, you're going

0:01:08.480000 --> 0:01:15.360000
 to provision an Azure AD tenant.

0:01:15.360000 --> 0:01:21.540000
 Now, I will use the words tenant and
 directory interchangeably because

0:01:21.540000 --> 0:01:27.820000
 for now at least a tenant is a directory
 is a tenant in Azure AD.

0:01:27.820000 --> 0:01:32.580000
 I can have multiple directories associated
 with the same account, which,

0:01:32.580000 --> 0:01:36.440000
 again, could be a Microsoft account,
 could be an enterprise account.

0:01:36.440000 --> 0:01:42.840000
 You can have up to 20 directories associated,
 that's a terrible A, up

0:01:42.840000 --> 0:01:47.360000
 to 20 directories associated
 with a single account.

0:01:47.360000 --> 0:01:53.820000
 Then you can associate Azure subscriptions
 with your account.

0:01:53.820000 --> 0:01:58.060000
 So this could be just, I'm
 going to say, A for Azure.

0:01:58.060000 --> 0:02:01.040000
 And I can have multiple Azure subscriptions
 where I'm going to have resource

0:02:01.040000 --> 0:02:05.940000
 groups and I'm going to have resources
 within those subscriptions.

0:02:05.940000 --> 0:02:09.140000
 And I can have those associated
 with different Azure ADs.

0:02:09.140000 --> 0:02:15.820000
 Or I might have an Azure AD that's
 simply used for some kind of cloud

0:02:15.820000 --> 0:02:19.140000
 service such as Microsoft 365.

0:02:19.140000 --> 0:02:28.120000
 And that really gets to why you might
 have multiple directories or tenants.

0:02:28.120000 --> 0:02:34.180000
 In most cases, an organization
 can have a single tenant.

0:02:34.180000 --> 0:02:37.420000
 And again, I'm using the words tenant
 and directory interchangeably.

0:02:37.420000 --> 0:02:40.720000
 I tend to use tenant, but that's just
 because I try to be consistent with

0:02:40.720000 --> 0:02:45.220000
 it. But I could have an organization
 as long as I'm on a higher tier,

0:02:45.220000 --> 0:02:47.580000
 not the free tier of Azure AD.

0:02:47.580000 --> 0:02:50.660000
 I can have unlimited
 objects in Azure AD.

0:02:50.660000 --> 0:02:54.600000
 So I don't need to have multiple
 directories to take care of that.

0:02:54.600000 --> 0:02:57.280000
 But there may be reasons I want
 to have multiple directories.

0:02:57.280000 --> 0:03:01.300000
 For example, maybe I've got a development
 environment that I want to be

0:03:01.300000 --> 0:03:06.720000
 really similar to my actual production
 environment for my cloud based

0:03:06.720000 --> 0:03:09.260000
 applications, my software
 as a service applications.

0:03:09.260000 --> 0:03:13.300000
 But I really want test users and that
 kind of thing that my dev team can

0:03:13.300000 --> 0:03:15.680000
 work with. So I might
 split that off.

0:03:15.680000 --> 0:03:18.840000
 Or this is an architecture
 that I've implemented.

0:03:18.840000 --> 0:03:25.540000
 I might want one Azure AD tenant for
 managing the resources in Azure and

0:03:25.540000 --> 0:03:30.100000
 then a second Azure AD tenant that I'm
 really replicating with my on premises

0:03:30.100000 --> 0:03:34.700000
 environment so that all of my on-prem
 users go into that second Azure

0:03:34.700000 --> 0:03:38.880000
 AD tenant and that second tenant is
 then connected to all of my cloud

0:03:38.880000 --> 0:03:40.100000
 based applications.

0:03:40.100000 --> 0:03:46.380000
 A couple of advantages of having multiple
 subscriptions associated with

0:03:46.380000 --> 0:03:48.100000
 the same account.

0:03:48.100000 --> 0:03:53.700000
 First of all, when I'm managing multiple
 subscriptions, and again, reasons

0:03:53.700000 --> 0:03:56.220000
 for having multiple subscriptions
 are similar.

0:03:56.220000 --> 0:04:01.200000
 I may have different frankly, charge
 codes that need to be completely

0:04:01.200000 --> 0:04:05.320000
 separate. And of course, you're paying
 at the subscription level.

0:04:05.320000 --> 0:04:10.060000
 And I may want different groups having
 different rights at the subscription

0:04:10.060000 --> 0:04:15.560000
 level. Or maybe we just acquired a
 new company and I want that company

0:04:15.560000 --> 0:04:20.120000
 to have their subscription under
 my directory, under my tenant.

0:04:20.120000 --> 0:04:24.460000
 So lots of reason you have that cool thing
 about having multiple directories

0:04:24.460000 --> 0:04:29.820000
 or multiple subscriptions under the same
 tenant is that I can manage those

0:04:29.820000 --> 0:04:31.780000
 together as long as I have rights.


0:04:31.780000 --> 0:04:36.280000
 So in other words, if we're looking
 at this first environment here where

0:04:36.280000 --> 0:04:38.980000
 I've got Azure AD.

0:04:38.980000 --> 0:04:44.660000
 And that's my let's say my
 primary resource tenant.

0:04:44.660000 --> 0:04:50.480000
 I can go into the portal and from the
 portal because these are in the

0:04:50.480000 --> 0:04:59.160000
 same, or they're using the same primary
 tenant, then from the portal,

0:04:59.160000 --> 0:05:03.380000
 I can actually access and manage
 both of those simultaneously.

0:05:03.380000 --> 0:05:04.760000
 And I can filter and
 lots of other stuff.

0:05:04.760000 --> 0:05:09.480000
 So lots of reasons for having multiple
 tenants, lots of reasons for having

0:05:09.480000 --> 0:05:12.420000
 multiple objects within
 your tenants.

0:05:12.420000 --> 0:05:17.600000
 Now let's talk about some details relative
 to multiple directory or multiple

0:05:17.600000 --> 0:05:19.220000
 tenant architecture.

0:05:19.220000 --> 0:05:22.360000
 So just some things
 to think about.

0:05:22.360000 --> 0:05:27.540000
 First of all, tenants and directories
 are the same thing.

0:05:27.540000 --> 0:05:33.640000
 And again, I'll try to use the word
 tenant as often as possible just for

0:05:33.640000 --> 0:05:37.840000
 consistency. But again, if you use
 either word, just know that they're

0:05:37.840000 --> 0:05:40.660000
 really relating to the same thing.


0:05:40.660000 --> 0:05:44.300000
 All right, each subscription is associated
 with a primary tenant or with

0:05:44.300000 --> 0:05:47.840000
 a tenant. You can actually pull the
 subscription information and see the

0:05:47.840000 --> 0:05:50.720000
 tenant that a subscription
 is associated with.

0:05:50.720000 --> 0:05:56.560000
 Now you can transfer a subscription
 from one tenant to another tenant.

0:05:56.560000 --> 0:06:01.400000
 But if you do that, all of your RBAC
 in that subscription will be wiped

0:06:01.400000 --> 0:06:03.420000
 out, which kind of
 makes sense, right?

0:06:03.420000 --> 0:06:06.100000
 Because you have a really completely
 different set of users.

0:06:06.100000 --> 0:06:07.580000
 But do be aware of that.

0:06:07.580000 --> 0:06:11.380000
 That if you do transfer a subscription,
 there would be probably a fair

0:06:11.380000 --> 0:06:14.560000
 bit of work making sure that
 that's up and running.

0:06:14.560000 --> 0:06:18.900000
 And as I said, a single tenant can
 be the primary tenant for multiple

0:06:18.900000 --> 0:06:24.320000
 subscriptions. And also keep in mind
 that there are different directory

0:06:24.320000 --> 0:06:28.480000
 tiers and there's licensing
 that goes with that.

0:06:28.480000 --> 0:06:32.300000
 When you first create a tenant, it's
 going to be on the free tier, which

0:06:32.300000 --> 0:06:35.140000
 gives you up to top of my head
 50,000 objects, I believe.

0:06:35.140000 --> 0:06:37.180000
 It's 50 or 500,000
 one of the other.

0:06:37.180000 --> 0:06:39.260000
 I know that's a big difference.

0:06:39.260000 --> 0:06:42.840000
 But make sure you have
 that solid for an exam.

0:06:42.840000 --> 0:06:46.480000
 But in any case, you've got the free
 tier and it has some functionality.

0:06:46.480000 --> 0:06:48.460000
 There's a basic tier above that.

0:06:48.460000 --> 0:06:53.940000
 And then there's also a premium
 P1 tier and a premium P2 tier.

0:06:53.940000 --> 0:06:58.860000
 Many of the things that we cover in this
 course are dependent on the premium

0:06:58.860000 --> 0:07:03.560000
 P2 tier. So just be aware of that as
 you're thinking about how you want

0:07:03.560000 --> 0:07:06.380000
 to implement your Azure licensing.


0:07:06.380000 --> 0:07:12.520000
 Now the Azure AD licensing, the way that
 works is it's on a per user basis.

0:07:12.520000 --> 0:07:20.580000
 And just because you have the P2 license
 active for an Azure AD tenant

0:07:20.580000 --> 0:07:24.440000
 doesn't mean that every single user account
 in there will take a license.

0:07:24.440000 --> 0:07:27.160000
 It depends on how you're using
 them certain things.

0:07:27.160000 --> 0:07:31.420000
 For example, if you're using multi
-factor authentication and a number

0:07:31.420000 --> 0:07:35.160000
 of other capabilities that come into
 play are going to be charged based

0:07:35.160000 --> 0:07:37.100000
 on how you implement them.

0:07:37.100000 --> 0:07:43.600000
 Also be aware that you do have this concept
 of business to business connectivity.

0:07:43.600000 --> 0:07:46.960000
 And what that is within Azure
 is actually pretty simple.

0:07:46.960000 --> 0:07:53.380000
 And I'm going to just go ahead and draw
 this out really, really simple.

0:07:53.380000 --> 0:07:56.340000
 I could actually manage to
 use my tools properly.

0:07:56.340000 --> 0:07:57.940000
 We can do that. There we go.

0:07:57.940000 --> 0:08:01.320000
 All right. Here is the idea
 with business to business.

0:08:01.320000 --> 0:08:04.620000
 And it's a multi-tenant concept.

0:08:04.620000 --> 0:08:07.640000
 Okay. So here I have tenant AAD1.

0:08:07.640000 --> 0:08:12.440000
 You can't name your tenant
 that by the way.

0:08:12.440000 --> 0:08:17.900000
 And over here I have tenant AAD2.

0:08:17.900000 --> 0:08:22.300000
 And AAD1 has some resource, let's
 say it's a resource group.

0:08:22.300000 --> 0:08:29.980000
 And I've got a user, this is
 as good as my drawing gets.

0:08:29.980000 --> 0:08:36.760000
 I've got a user that's in AAD2, but that
 user is collaborating on a project

0:08:36.760000 --> 0:08:38.580000
 that uses that resource group.

0:08:38.580000 --> 0:08:41.900000
 But that resource group is in a subscription
 that's associated with AAD1.

0:08:41.900000 --> 0:08:45.760000
 Well, what you can do is you can have
 what are called guest users, which

0:08:45.760000 --> 0:08:50.840000
 are simply users from another tenant
 that are registered in your tenant

0:08:50.840000 --> 0:08:56.660000
 and then can be assigned access to whatever
 cloud applications your tenant

0:08:56.660000 --> 0:09:01.500000
 is responsible for, including
 the Azure subscription.

0:09:01.500000 --> 0:09:08.620000
 So that concept is the business
 to business concept.

0:09:08.620000 --> 0:09:13.680000
 And really that gives us the ideas
 behind having multiple directories.

0:09:13.680000 --> 0:09:21.300000
 Now what I want to do is I want to go
 ahead and I want to shift over and

0:09:21.300000 --> 0:09:24.740000
 demonstrate how to go about
 creating a directory.

0:09:24.740000 --> 0:09:28.120000
 The process of creating a directory
 is actually really straightforward.

0:09:28.120000 --> 0:09:31.300000
 I'm going to go in and say I use the
 directory instead of tenant, sorry

0:09:31.300000 --> 0:09:36.200000
 about that. I'm going
 to type in active.

0:09:36.200000 --> 0:09:43.820000
 As soon as I type in active, I've got
 Azure Active Directory and I'm going

0:09:43.820000 --> 0:09:47.140000
 to create an Azure
 Active Directory.

0:09:47.140000 --> 0:09:49.860000
 This is a pretty simple
 demonstration.

0:09:49.860000 --> 0:09:51.500000
 I'm going to give this
 an organization name.

0:09:51.500000 --> 0:09:58.580000
 Now the organization name must be unique
 within the Azure environment.

0:09:58.580000 --> 0:10:00.320000
 And I'll tell you why that
 isn't just about it.

0:10:00.320000 --> 0:10:04.640000
 It really has to be unique within
 the overall Microsoft environment.

0:10:04.640000 --> 0:10:09.660000
 And so I'm going to
 call this az300.2.

0:10:09.660000 --> 0:10:13.780000
 And the actual, the organization name
 doesn't have to be, but the initial

0:10:13.780000 --> 0:10:15.340000
 domain name does.

0:10:15.340000 --> 0:10:20.360000
 So let's go INE az300.2.

0:10:20.360000 --> 0:10:24.540000
 And then you'll notice that it
 has the dot on Microsoft.com.

0:10:24.540000 --> 0:10:29.320000
 That is going to be the
 name of that domain.

0:10:29.320000 --> 0:10:33.640000
 So you're really creating a directory
 with a public domain name.

0:10:33.640000 --> 0:10:39.780000
 And that's it. So the actual process,
 all that talk about working with

0:10:39.780000 --> 0:10:44.280000
 multiple directories, the process for
 provisioning a new directory is

0:10:44.280000 --> 0:10:46.560000
 really very straightforward.

0:10:46.560000 --> 0:10:51.140000
 And what you need to think about architecturally
 is do I need to have

0:10:51.140000 --> 0:10:52.180000
 multiple directories?

0:10:52.180000 --> 0:10:54.440000
 Why would I use multiple
 directories?

0:10:54.440000 --> 0:10:58.400000
 And then the implementation of said directories
 is fairly straightforward.

