WEBVTT

0:00:02.840000 --> 0:00:08.960000
 In this video, we're going to deal with
 resource policies and initiatives.

0:00:08.960000 --> 0:00:12.260000
 And there are a number of
 topics related to this.

0:00:12.260000 --> 0:00:16.620000
 They're not really particularly difficult,
 but I do find they come kind

0:00:16.620000 --> 0:00:18.640000
 of a few old sideways
 at a lot of people.

0:00:18.640000 --> 0:00:20.700000
 They're not necessarily
 familiar with this.

0:00:20.700000 --> 0:00:23.960000
 So I'm going to take my time, make sure
 that I am as clear as possible,

0:00:23.960000 --> 0:00:27.820000
 which I'm doing all the time, but
 we'll make sure that right now.

0:00:27.820000 --> 0:00:29.900000
 All right. So we're going to
 cover the following topics.

0:00:29.900000 --> 0:00:33.540000
 We're going to look at what
 our back policies are.

0:00:33.540000 --> 0:00:35.740000
 And then we'll go through
 the process.

0:00:35.740000 --> 0:00:39.260000
 We'll look at how to
 define a policy.

0:00:39.260000 --> 0:00:41.880000
 Then we'll look at how
 to assign a policy.

0:00:41.880000 --> 0:00:45.320000
 And then we'll look at how to create
 an initiative, which is really a

0:00:45.320000 --> 0:00:47.480000
 group of policies.

0:00:47.480000 --> 0:00:51.580000
 And finally, we'll take a look at really
 the relationship between policies

0:00:51.580000 --> 0:00:54.440000
 and roles and what people
 think of as our back.

0:00:54.440000 --> 0:00:57.320000
 And I know that can be a little bit
 confusing because these are referred

0:00:57.320000 --> 0:01:02.320000
 often as our back policies, but I think
 of the concept of policy as being

0:01:02.320000 --> 0:01:07.560000
 a little bit separate from the concept
 of roles and really complementary.

0:01:07.560000 --> 0:01:10.840000
 So let's just go ahead and
 let's dive into this.

0:01:10.840000 --> 0:01:14.580000
 I want to start out by talking
 about what policies do.

0:01:14.580000 --> 0:01:17.960000
 Policies have specific use cases.

0:01:17.960000 --> 0:01:20.600000
 And the most common first use
 case you'll find is deny.

0:01:20.600000 --> 0:01:26.740000
 And what that means is I can define
 a policy that will deny actions that

0:01:26.740000 --> 0:01:28.800000
 meet certain criteria.

0:01:28.800000 --> 0:01:30.380000
 Right, which almost sounds
 a little bit backwards.

0:01:30.380000 --> 0:01:34.860000
 But let's say, for example, that you
 are provisioning storage accounts.

0:01:34.860000 --> 0:01:41.920000
 And I want to ensure that you only provision
 storage accounts that require

0:01:41.920000 --> 0:01:44.100000
 or enforce HTTPS.

0:01:44.100000 --> 0:01:50.220000
 I could create a policy that would deny
 the ability to provision a storage

0:01:50.220000 --> 0:01:55.100000
 account. If that storage account does
 not have the appropriate settings

0:01:55.100000 --> 0:01:58.700000
 in the case of the example
 enforcing HTTPS security.

0:01:58.700000 --> 0:02:02.280000
 There are other things that
 you can do as well.

0:02:02.280000 --> 0:02:06.680000
 You can set up policies
 to monitor.

0:02:06.680000 --> 0:02:11.560000
 And monitor and audit are very similar
 monitors, just really looking at

0:02:11.560000 --> 0:02:16.340000
 what value is. Audit is setting thresholds
 or conditions that are going

0:02:16.340000 --> 0:02:20.260000
 to give you some kind of notification
 if they do not pass.

0:02:20.260000 --> 0:02:22.160000
 And then we also have the ability.


0:02:22.160000 --> 0:02:24.960000
 This was actually pretty
 cool to correct.

0:02:24.960000 --> 0:02:29.200000
 So let's say, for example, that take
 the first example rather than a deny.

0:02:29.200000 --> 0:02:35.160000
 Maybe I set a correct policy so that
 if you are creating storage accounts

0:02:35.160000 --> 0:02:41.540000
 that don't have HTTPS and force, I could
 create a policy that would correct

0:02:41.540000 --> 0:02:44.280000
 that. That would be run periodically
 and it would update that.

0:02:44.280000 --> 0:02:46.380000
 There's a lot of complexity
 to the correct.

0:02:46.380000 --> 0:02:50.340000
 Other than the fact that it exists, I'm
 not going to go into that in this

0:02:50.340000 --> 0:02:55.020000
 course. Really going to stick pretty
 much to deny as the example.

0:02:55.020000 --> 0:03:01.220000
 Now components. What are
 the parts of a policy?

0:03:01.220000 --> 0:03:03.320000
 The parts of the policy
 are pretty simple.

0:03:03.320000 --> 0:03:06.320000
 And we'll take a look at these in
 some detail in just a moment.

0:03:06.320000 --> 0:03:08.540000
 But we've got the filter.

0:03:08.540000 --> 0:03:13.120000
 And the filter is going to define what
 conditions this policy applies

0:03:13.120000 --> 0:03:17.700000
 to. And you typically think of policies
 as being in the negative.

0:03:17.700000 --> 0:03:22.940000
 And so what set of conditions
 would negatively trigger this?

0:03:22.940000 --> 0:03:26.420000
 So in other words, I'm looking
 to take that earlier example.

0:03:26.420000 --> 0:03:31.600000
 I'm looking for the storage accounts
 that don't have HTTPS and force,

0:03:31.600000 --> 0:03:33.180000
 just as an example.

0:03:33.180000 --> 0:03:34.820000
 Then there's the action.

0:03:34.820000 --> 0:03:38.360000
 And the action simply really
 kind of goes up there.

0:03:38.360000 --> 0:03:41.060000
 What do I want to do with
 this particular policy?

0:03:41.060000 --> 0:03:42.220000
 Is this going to be a deny?

0:03:42.220000 --> 0:03:43.820000
 Is it just going to be an audit?

0:03:43.820000 --> 0:03:46.200000
 Possibly as I said,
 even a correct.

0:03:46.200000 --> 0:03:47.580000
 And then finally parameters.

0:03:47.580000 --> 0:03:50.580000
 Now parameters are really interesting
 because what they allow you to do

0:03:50.580000 --> 0:03:58.140000
 is they allow you to define very flexible,
 very general policies, which

0:03:58.140000 --> 0:04:02.500000
 then when they are applied
 can be made more specific.

0:04:02.500000 --> 0:04:07.960000
 These are used frequently with built
-in policies as opposed to the ones

0:04:07.960000 --> 0:04:09.420000
 that you might create.

0:04:09.420000 --> 0:04:12.900000
 Typically I find when I create my own
 policies, I don't usually use a

0:04:12.900000 --> 0:04:17.080000
 lot of parameters only because I'm
 defining a very specific policy.

0:04:17.080000 --> 0:04:21.400000
 But there are limits to the number
 of policies that you can provision.

0:04:21.400000 --> 0:04:28.060000
 So you might want to, if you have the
 need to create a more generic policy

0:04:28.060000 --> 0:04:31.240000
 that can then be applied specifically,
 you might want to do that.

0:04:31.240000 --> 0:04:35.100000
 Let's say for example, you
 have a cost center policy.

0:04:35.100000 --> 0:04:38.080000
 You want to make sure that cost center
 is always applied to your resources.

0:04:38.080000 --> 0:04:42.500000
 In fact, you want to automatically
 apply the appropriate cost center.

0:04:42.500000 --> 0:04:46.020000
 Well, the cost center may change
 let's say by resource group.

0:04:46.020000 --> 0:04:51.700000
 So I could create a generic cost center
 policy that has a parameter for

0:04:51.700000 --> 0:04:53.200000
 the actual cost center value.

0:04:53.200000 --> 0:04:57.140000
 And then every time I apply that policy
 to let's say a resource group,

0:04:57.140000 --> 0:05:02.140000
 I would then specify at the time it's
 assigned what that value for that

0:05:02.140000 --> 0:05:04.900000
 parameter is. So that's
 how they apply.

0:05:04.900000 --> 0:05:08.120000
 Now what about the policies
 themselves?

0:05:08.120000 --> 0:05:11.000000
 And that's where we go
 into defining policies.

0:05:11.000000 --> 0:05:16.260000
 And what you'll find with policies as
 with many things, most things now

0:05:16.260000 --> 0:05:20.960000
 in Azure, is that they're defined using
 JSON, JavaScript object notation.

0:05:20.960000 --> 0:05:28.540000
 Not a particularly complex standard,
 it's a data standard.

0:05:28.540000 --> 0:05:35.340000
 I will tell you that the logic within
 policies can get a little bit complex.

0:05:35.340000 --> 0:05:38.920000
 But the policy itself
 is pretty simple.

0:05:38.920000 --> 0:05:41.900000
 You've got really a few things.

0:05:41.900000 --> 0:05:51.700000
 I've got my display
 name for the policy.

0:05:51.700000 --> 0:05:57.140000
 I've got the type of policy
 and I've got built in.

0:05:57.140000 --> 0:06:03.420000
 The mode can be all or I'm sorry,
 policy type is built in mode.

0:06:03.420000 --> 0:06:06.700000
 I put up their separate so are on
 the same line so I could fix it.

0:06:06.700000 --> 0:06:11.060000
 Mode is a separate attribute,
 a separate property.

0:06:11.060000 --> 0:06:15.860000
 Index are specific attributes
 that are pre-indexed.

0:06:15.860000 --> 0:06:18.240000
 Description, that's pretty
 straightforward.

0:06:18.240000 --> 0:06:20.460000
 Metadata is just more information.


0:06:20.460000 --> 0:06:22.820000
 In this case, I've
 got a parameter.

0:06:22.820000 --> 0:06:27.220000
 This is one of the built in, as you
 can see, the policy type built in,

0:06:27.220000 --> 0:06:30.240000
 and list of allowed SKUs.

0:06:30.240000 --> 0:06:36.460000
 And what this does is that ties the
 SKUs you're putting in and then if

0:06:36.460000 --> 0:06:41.480000
 it's not all of those, then
 the effect is to deny.

0:06:41.480000 --> 0:06:47.940000
 This would be used when you want to say
 that only certain virtual machine

0:06:47.940000 --> 0:06:51.720000
 sizes are available in a particular
 resource group, for example.

0:06:51.720000 --> 0:06:55.060000
 And I actually use a variation
 of this quite frequently.

0:06:55.060000 --> 0:06:59.580000
 And so that's the definition of a policy,
 but then the assignment of a

0:06:59.580000 --> 0:07:03.180000
 policy, there's a few different ways
 that you can assign a policy.

0:07:03.180000 --> 0:07:10.540000
 One is you can assign a policy using,
 of course, PowerShell or the CLI,

0:07:10.540000 --> 0:07:13.080000
 pretty straightforward, new
 AZ policy assignment.

0:07:13.080000 --> 0:07:18.060000
 Now, the scope has to be the ID of what
 you're assigning the policy to.

0:07:18.060000 --> 0:07:24.040000
 Typically again, either a resource group
 or a subscription, although it

0:07:24.040000 --> 0:07:28.300000
 may go a level above a subscription, you
 can actually assign it to a management

0:07:28.300000 --> 0:07:33.400000
 group as well. Demo name or display name,
 pretty straightforward, description,

0:07:33.400000 --> 0:07:34.480000
 pretty straightforward.

0:07:34.480000 --> 0:07:36.900000
 What matters is policy
 definitions.

0:07:36.900000 --> 0:07:40.480000
 So the two things that matter when you
 are assigning a policy or the scope

0:07:40.480000 --> 0:07:42.740000
 and the definition.

0:07:42.740000 --> 0:07:50.040000
 Now a policy can also be assigned
 through the portal.

0:07:50.040000 --> 0:07:53.480000
 That's what we have here,
 pretty straightforward.

0:07:53.480000 --> 0:07:58.060000
 And this is actually looking at not only
 where I can go to assign policies,

0:07:58.060000 --> 0:08:00.320000
 but also view policies.

0:08:00.320000 --> 0:08:04.100000
 So in this particular screen, in the
 resource group that I'm associated

0:08:04.100000 --> 0:08:08.700000
 with. So this is the resource group that
 this particular one is associated

0:08:08.700000 --> 0:08:11.500000
 with. I've got two policies.

0:08:11.500000 --> 0:08:14.360000
 One of the policies
 is non-compliant.

0:08:14.360000 --> 0:08:15.020000
 That's a problem.

0:08:15.020000 --> 0:08:16.480000
 The other one is compliant.

0:08:16.480000 --> 0:08:20.540000
 Now the non-compliant, you'll
 see a lot of these policies.

0:08:20.540000 --> 0:08:24.180000
 And that is actually an
 Azure Security Center.

0:08:24.180000 --> 0:08:30.240000
 And so it's actually looking at all of
 the rules associated with the Security

0:08:30.240000 --> 0:08:31.920000
 Center, all the best practices.

0:08:31.920000 --> 0:08:35.060000
 And there's a few of the resources
 in there that are non-compliant.

0:08:35.060000 --> 0:08:39.360000
 In fact, I can see
 that two out of 89.

0:08:39.360000 --> 0:08:43.240000
 Now that's also pretty interesting because
 notice non-compliant policies,

0:08:43.240000 --> 0:08:45.280000
 this is I have 89 policies.

0:08:45.280000 --> 0:08:48.260000
 But if I look over here, this
 looks like two policies.

0:08:48.260000 --> 0:08:49.820000
 So what's going on there?

0:08:49.820000 --> 0:08:52.800000
 Well, what's going on there
 is the next topic.

0:08:52.800000 --> 0:08:55.340000
 And that is initiatives.

0:08:55.340000 --> 0:09:00.420000
 Rather than having a lot of individual
 policies that you need to assign,

0:09:00.420000 --> 0:09:04.260000
 if you have a number of policies that are
 related, you can tie those together

0:09:04.260000 --> 0:09:06.420000
 in what's called an initiative.

0:09:06.420000 --> 0:09:09.720000
 And in fact, Azure Security Center,
 that's how that works.

0:09:09.720000 --> 0:09:12.920000
 There are a number of policies
 that Security Center uses.

0:09:12.920000 --> 0:09:16.420000
 And rather than assigning each of those
 policies individually, there are

0:09:16.420000 --> 0:09:20.620000
 initiatives that are
 tie those together.

0:09:20.620000 --> 0:09:24.100000
 And so that's really simply
 put what an initiative is.

0:09:24.100000 --> 0:09:29.180000
 It is simply a grouping of policies
 that are applied as a unit.

0:09:29.180000 --> 0:09:31.100000
 So they're all applied together.

0:09:31.100000 --> 0:09:35.360000
 Now what is important about this, in addition
 to the fact that can simplify

0:09:35.360000 --> 0:09:40.940000
 things for you, particularly if you have
 a complex application of policies,

0:09:40.940000 --> 0:09:44.840000
 is that the policy itself
 has parameters.

0:09:44.840000 --> 0:09:48.360000
 Every, excuse me, the initiative
 has parameters.

0:09:48.360000 --> 0:09:52.640000
 Every policy that you add to an initiative
 can have its own parameters.

0:09:52.640000 --> 0:09:56.140000
 And you need to define how
 they're going to be set.

0:09:56.140000 --> 0:09:58.040000
 And those can be set two ways.

0:09:58.040000 --> 0:10:02.420000
 It can be set for the policy as part
 of the initiative, so within the

0:10:02.420000 --> 0:10:07.100000
 initiative itself, or it can surface
 when the initiative is assigned to

0:10:07.100000 --> 0:10:10.400000
 act just like an individual
 policy parameter would.

0:10:10.400000 --> 0:10:15.020000
 And as I mentioned, the initiatives
 are used by Azure, they're used by

0:10:15.020000 --> 0:10:16.800000
 Security Center.

0:10:16.800000 --> 0:10:20.940000
 One more topic here, and then we really
 have all the concept related to

0:10:20.940000 --> 0:10:21.860000
 policies and initiatives.

0:10:21.860000 --> 0:10:28.700000
 And that is, what is that relationship
 between policy and role?

0:10:28.700000 --> 0:10:32.440000
 And the way it works is that if you
 think about RBAC, if you think about

0:10:32.440000 --> 0:10:35.820000
 roles, roles really focus
 on permissions.

0:10:35.820000 --> 0:10:41.800000
 What can a particular
 principle do?

0:10:41.800000 --> 0:10:47.040000
 And it's tied to permissions, it's tied
 in that way to users or to principles.

0:10:47.040000 --> 0:10:52.420000
 Policy focuses on resource
 properties.

0:10:52.420000 --> 0:10:58.020000
 And RBAC defaults to deny,
 policy defaults to allow.

0:10:58.020000 --> 0:11:00.820000
 And you want to use
 those together.

0:11:00.820000 --> 0:11:03.740000
 And an example, and to me, I kind of
 wanted to get down to the example

0:11:03.740000 --> 0:11:07.920000
 because I think it really ties this
 concept of policy and RBAC together.

0:11:07.920000 --> 0:11:12.620000
 Let's say that you've got
 a role VM contributor.

0:11:12.620000 --> 0:11:17.940000
 I could grant you contributor role
 on a particular resource group, VM

0:11:17.940000 --> 0:11:19.720000
 contributors specifically.

0:11:19.720000 --> 0:11:23.400000
 And what that will allow you to do
 is provision virtual machines, and

0:11:23.400000 --> 0:11:27.560000
 it will allow you to provision the resources
 required for virtual machines,

0:11:27.560000 --> 0:11:30.000000
 in addition to the virtual
 machine itself.

0:11:30.000000 --> 0:11:34.440000
 However, what that will allow you to
 do, and what I have no control over,

0:11:34.440000 --> 0:11:40.200000
 from the standpoint of the role, is
 that it will allow you to create any

0:11:40.200000 --> 0:11:42.180000
 size virtual machine.

0:11:42.180000 --> 0:11:47.140000
 And if you take a look at the cost of,
 say, an A1 size virtual machine,

0:11:47.140000 --> 0:11:51.460000
 versus the cost of an H32 size virtual
 machine, you'll notice that there

0:11:51.460000 --> 0:11:53.860000
 is a significant cost
 difference there.

0:11:53.860000 --> 0:11:57.340000
 And so what I might want to do is allow
 you to provision virtual machines,

0:11:57.340000 --> 0:12:03.380000
 but also be able to control the size
 or the skew of the virtual machines.

0:12:03.380000 --> 0:12:09.000000
 And that's where I can use a role,
 and I can use a policy together.

0:12:09.000000 --> 0:12:13.320000
 Now I assign the policy to a resource
 group, and that means anybody in

0:12:13.320000 --> 0:12:17.100000
 that resource group is going
 to be subject to that policy.

0:12:17.100000 --> 0:12:22.400000
 And that's also, by the way, where
 the role of owner comes into play,

0:12:22.400000 --> 0:12:24.160000
 so there's multiple layers here.

0:12:24.160000 --> 0:12:28.580000
 If I'm an owner, I can control policies
 at the object level, right?

0:12:28.580000 --> 0:12:31.940000
 So if I own a resource group, and there's
 a policy I don't want the resource

0:12:31.940000 --> 0:12:35.520000
 group to adhere to, I can
 just make that go away.

0:12:35.520000 --> 0:12:38.680000
 And that's one of the reasons, kind
 of all of this being circular, is

0:12:38.680000 --> 0:12:42.260000
 that you may, for example, want to define
 your own custom roles, because

0:12:42.260000 --> 0:12:46.140000
 maybe I want a just a little bit less
 than owner role that does almost

0:12:46.140000 --> 0:12:51.500000
 everything but can't disable policy,
 for example, or assign policy.

0:12:51.500000 --> 0:12:55.340000
 And so these are the things that you
 want to think about as you blend

0:12:55.340000 --> 0:12:58.020000
 the concept of roles and
 policies together.

0:12:58.020000 --> 0:13:02.600000
 I will say that I think policies are
 a little bit more complex to work

0:13:02.600000 --> 0:13:06.660000
 with in roles simply because there's
 more that you can do with them.

