WEBVTT

0:00:02.860000 --> 0:00:09.600000
 I am a huge proponent of containerizing
 your workloads.

0:00:09.600000 --> 0:00:12.620000
 But if you're going to run containers,
 you want to make sure that you

0:00:12.620000 --> 0:00:17.340000
 are running those containers securely,
 and that is really what this video

0:00:17.340000 --> 0:00:21.480000
 is about. We're going to talk about container
 security in the Azure environment

0:00:21.480000 --> 0:00:27.800000
 and the topics that we're going to cover,
 include container resource protection,

0:00:27.800000 --> 0:00:31.520000
 we're going to look at container authentication,
 and specifically we're

0:00:31.520000 --> 0:00:36.420000
 going to look at Azure Container Registry
 Authentication, and I'm going

0:00:36.420000 --> 0:00:37.700000
 to demonstrate that.

0:00:37.700000 --> 0:00:41.520000
 We'll also talk about container isolation,
 what are some options that

0:00:41.520000 --> 0:00:46.560000
 we have there. We will talk about container
 networking, and I'll talk

0:00:46.560000 --> 0:00:50.280000
 about a solution that I personally think
 might be a little bit overcomplicated,

0:00:50.280000 --> 0:00:53.680000
 at least in some circumstances, and then
 I'm going to go through a demonstration

0:00:53.680000 --> 0:00:56.900000
 of container networking as well.

0:00:56.900000 --> 0:01:01.840000
 So let's go ahead and let's
 dive right into this.

0:01:01.840000 --> 0:01:09.420000
 Now, in some senses, containers are
 just ordinary resources, right?

0:01:09.420000 --> 0:01:15.480000
 And so we want to really effectively
 protect those, like we would any

0:01:15.480000 --> 0:01:19.900000
 other resource. So for example, we've
 got role-based access control.

0:01:19.900000 --> 0:01:21.980000
 All right, cool.

0:01:21.980000 --> 0:01:26.400000
 We've got that for managing the resources,
 really all of our resources,

0:01:26.400000 --> 0:01:31.520000
 and as you'll see, actually even authenticating
 down to the data level,

0:01:31.520000 --> 0:01:35.140000
 right? Going beyond the control plane
 to the data plane in Azure Container

0:01:35.140000 --> 0:01:39.200000
 Registries. Also, our vulnerability
 scanning that is part of Security

0:01:39.200000 --> 0:01:43.320000
 Center applies to Azure
 Container Registries.

0:01:43.320000 --> 0:01:49.180000
 And if you've got IIS Container Solutions,
 in other words, if you're running

0:01:49.180000 --> 0:01:54.740000
 Docker or another Container Solution
 on a virtual machine, you actually

0:01:54.740000 --> 0:01:57.900000
 have agent-based threat
 monitoring.

0:01:57.900000 --> 0:02:01.260000
 And if you're using Azure Kubernetes
 service, it's actually built in and

0:02:01.260000 --> 0:02:03.720000
 you have agent-less
 threat monitoring.

0:02:03.720000 --> 0:02:10.360000
 So you don't need to actually install anything
 to get that threat monitoring.

0:02:10.360000 --> 0:02:16.100000
 Now, as far as security hardening in
 general, okay, the Kubernetes in

0:02:16.100000 --> 0:02:21.200000
 particular is certified by CIS Center
 for Internet Security, the Docker

0:02:21.200000 --> 0:02:26.820000
 benchmark policy, all right, and that
 monitoring has been set up in Security

0:02:26.820000 --> 0:02:30.660000
 Center and it has gotten
 a seal of approval.

0:02:30.660000 --> 0:02:37.220000
 If you are working with IaaS, in other
 words, if you're working with virtual

0:02:37.220000 --> 0:02:41.240000
 machines, then you have to take into
 account that you are responsible

0:02:41.240000 --> 0:02:48.440000
 for everything from the operating system
 up, which includes your Container

0:02:48.440000 --> 0:02:52.680000
 System, right? So there's things, of
 course, that you can do in the Azure

0:02:52.680000 --> 0:02:57.000000
 environment, but in addition to that,
 you are gonna have to do some work

0:02:57.000000 --> 0:03:03.140000
 at a minimum, for example, maybe installing
 the agent for threat monitoring,

0:03:03.140000 --> 0:03:06.780000
 okay? If you're using Kubernetes, there
 are a lot of capabilities built

0:03:06.780000 --> 0:03:09.960000
 in and there are some capabilities that
 are built in that are currently

0:03:09.960000 --> 0:03:14.860000
 in preview at the time of this
 recording, which is in May.

0:03:14.860000 --> 0:03:20.960000
 Now, if, again, you're using Kubernetes
 just because those tools are baked

0:03:20.960000 --> 0:03:26.260000
 in, doesn't mean that you can just spin
 it up, of course, and ignore it.

0:03:26.260000 --> 0:03:32.080000
 So keep that in mind and with that, we're
 gonna go ahead and we are going

0:03:32.080000 --> 0:03:45.200000
 to move on. Okay, next, I wanna talk about
 Container Authentication, right?

0:03:45.200000 --> 0:03:50.940000
 So how are you going to get to the data
 plane within the Container environment

0:03:50.940000 --> 0:03:56.620000
 itself? And really, as you can see, the
 options you have are really dependent

0:03:56.620000 --> 0:04:00.420000
 upon the platform that
 you are implementing.

0:04:00.420000 --> 0:04:02.720000
 Let's take a look at these.

0:04:02.720000 --> 0:04:05.500000
 First of all, fairly
 straightforward.

0:04:05.500000 --> 0:04:11.020000
 If you're using Azure Container Instances,
 well, then there really isn't

0:04:11.020000 --> 0:04:13.260000
 anything built in for
 authentication.

0:04:13.260000 --> 0:04:16.180000
 Now, that doesn't mean you can't have
 some sort of authentication system

0:04:16.180000 --> 0:04:20.620000
 built in to the containers themselves
 and to your workload, but other

0:04:20.620000 --> 0:04:24.120000
 than at the control plane, in other
 words, being able to start, stop,

0:04:24.120000 --> 0:04:28.360000
 create and delete the Container Instances
 themselves, there's really no

0:04:28.360000 --> 0:04:31.740000
 other additional help
 you're gonna get.

0:04:31.740000 --> 0:04:37.800000
 Now, containers that are hosted on IaaS,
 well, that's gonna be like any

0:04:37.800000 --> 0:04:41.360000
 other VM. You do have the administrator
 login, and that of course is and

0:04:41.360000 --> 0:04:46.720000
 can be controlled through the Azure
 environment, through the portal, or

0:04:46.720000 --> 0:04:48.200000
 even through the command line.

0:04:48.200000 --> 0:04:51.480000
 But beyond that, that's really
 pretty much it, right?

0:04:51.480000 --> 0:04:55.600000
 Because once you get into the virtual
 machine, then really managing Docker,

0:04:55.600000 --> 0:04:59.380000
 managing your container
 environment is on you.

0:04:59.380000 --> 0:05:05.740000
 Now, the Azure Container Registry,
 a little bit more interesting.

0:05:05.740000 --> 0:05:12.380000
 Azure Container Registry allows
 for Azure AD authentication.

0:05:12.380000 --> 0:05:16.140000
 And in fact, we're gonna take a look at
 some roles that are actually specific

0:05:16.140000 --> 0:05:20.440000
 to the Azure Container Registry
 or ACR data plane.

0:05:20.440000 --> 0:05:24.160000
 In other words, going beyond just
 managing it as a resource.

0:05:24.160000 --> 0:05:30.120000
 The Azure Container Registry does
 have its own managed identity.

0:05:30.120000 --> 0:05:37.740000
 Also, if you are using AKS, AKS has
 its own managed identity as well.

0:05:37.740000 --> 0:05:42.500000
 And I would take my managed identity
 from AKS and authenticate it into

0:05:42.500000 --> 0:05:43.820000
 an Azure Container Registry.

0:05:43.820000 --> 0:05:49.700000
 In fact, as you will see in another
 video, if you watch a video on AKS

0:05:49.700000 --> 0:05:56.380000
 or Azure Kubernetes Service, you actually
 select a container registry

0:05:56.380000 --> 0:06:01.160000
 that you want to have it registered
 with and kind of use as its own, if

0:06:01.160000 --> 0:06:02.880000
 you will, repository.

0:06:02.880000 --> 0:06:06.100000
 But that's gonna be not really covered
 in this video, but it is covered

0:06:06.100000 --> 0:06:08.000000
 elsewhere within INA.

0:06:08.000000 --> 0:06:09.900000
 Two other things we have.

0:06:09.900000 --> 0:06:16.460000
 You have the ability to implement an
 admin user for your ACR, for your

0:06:16.460000 --> 0:06:18.120000
 Azure Container Registry.

0:06:18.120000 --> 0:06:24.900000
 And that is kind of a traditional
 Container Registry user account.

0:06:24.900000 --> 0:06:26.940000
 It's got full privileges.

0:06:26.940000 --> 0:06:29.800000
 You can have the account created, the
 account will be the same name as

0:06:29.800000 --> 0:06:34.120000
 the registry. And then there are two passwords,
 two secrets that are created

0:06:34.120000 --> 0:06:36.080000
 and you can regenerate them.

0:06:36.080000 --> 0:06:40.880000
 And you can choose to use that, but
 if possible, the recommendation is

0:06:40.880000 --> 0:06:45.000000
 to use Azure AD for your authentication
 purposes because you have much

0:06:45.000000 --> 0:06:48.700000
 better granular control,
 monitoring, et cetera.

0:06:48.700000 --> 0:06:55.060000
 You can also generate what's called
 a repository scoped access token.

0:06:55.060000 --> 0:07:02.700000
 When you access an ACR, when you access
 any container registry, you do

0:07:02.700000 --> 0:07:05.380000
 so via an access token.

0:07:05.380000 --> 0:07:11.200000
 And you can, actually, for example,
 use the Azure CLI to just generate

0:07:11.200000 --> 0:07:14.540000
 that token. So if I needed to generate
 the token that I was gonna use

0:07:14.540000 --> 0:07:18.880000
 in some other process, I could do that
 and then having that token, though

0:07:18.880000 --> 0:07:23.300000
 you'd have to be careful, would give you
 the ability to log in with whatever

0:07:23.300000 --> 0:07:26.100000
 rights are associated with it.

0:07:26.100000 --> 0:07:32.580000
 So in terms of container authentication,
 the two big topics are ACR, which

0:07:32.580000 --> 0:07:33.820000
 we're covering in this video.

0:07:33.820000 --> 0:07:39.020000
 And then Kubernetes also, of course,
 has its own spin in things to think

0:07:39.020000 --> 0:07:41.400000
 about when it comes
 to authentication.

0:07:41.400000 --> 0:07:47.800000
 But what I'd like to do now is I would
 like to demonstrate authenticating

0:07:47.800000 --> 0:07:54.560000
 into the ACR. And what I'm gonna do,
 I've got an Azure Container Registry.

0:07:54.560000 --> 0:07:57.920000
 I'm gonna go through the process of provisioning
 a new container registry

0:07:57.920000 --> 0:07:59.980000
 just so you can see those options.


0:07:59.980000 --> 0:08:05.040000
 Then I'm really gonna go in and drill
 into my container registry, and

0:08:05.040000 --> 0:08:07.940000
 what's already there, and take a
 look at the options with that.

0:08:07.940000 --> 0:08:13.520000
 And then I'm gonna take a look at how
 you can leverage Azure AD and the

0:08:13.520000 --> 0:08:19.400000
 Azure CLI to simplify the process of
 interacting with your Azure Container

0:08:19.400000 --> 0:08:24.160000
 Registry. So let's go ahead
 and let's jump into this.

0:08:24.160000 --> 0:08:31.060000
 All right, that was actually not exactly
 where I wanna be, there we go.

0:08:31.060000 --> 0:08:41.140000
 Okay, if I wanted to provision a container
 registry, so you just go, let

0:08:41.140000 --> 0:08:42.120000
 me just do registry.

0:08:42.120000 --> 0:08:43.400000
 Yeah, there we go.

0:08:43.400000 --> 0:08:46.960000
 There's a container registry.

0:08:46.960000 --> 0:08:52.960000
 Which to me, it's icon, when it's gonna
 show close up, looks like an overflowing

0:08:52.960000 --> 0:08:57.040000
 bucket of popcorn, but that really
 has nothing to do with anything.

0:08:57.040000 --> 0:08:59.220000
 Okay, so what are my options here?


0:08:59.220000 --> 0:09:01.440000
 First of all, I can put
 it in a resource group.

0:09:01.440000 --> 0:09:04.660000
 So let's say for example, I
 was gonna demo containers.

0:09:04.660000 --> 0:09:06.740000
 I would have to give
 it a registry name.

0:09:06.740000 --> 0:09:12.140000
 The registry name is a
 prefix to .AzureCR.io.

0:09:12.140000 --> 0:09:15.100000
 You can take an exam, that's
 real good to know.

0:09:15.100000 --> 0:09:19.840000
 Because it is a prefix to a public DNS
 fully qualified domain name, it's

0:09:19.840000 --> 0:09:20.900000
 gonna be unique.

0:09:20.900000 --> 0:09:29.360000
 So I could say, I-any, ACR demo.

0:09:29.360000 --> 0:09:30.860000
 Okay, give it a location.

0:09:30.860000 --> 0:09:34.040000
 Now, SKUs, basic, standard,
 and premium.

0:09:34.040000 --> 0:09:36.060000
 Basic is gonna be the cheapest.

0:09:36.060000 --> 0:09:40.020000
 You get more features
 as you go up in tier.

0:09:40.020000 --> 0:09:44.260000
 Okay, let's see if we get the info on
 what you get, because it's always

0:09:44.260000 --> 0:09:46.360000
 good to know the differences
 there.

0:09:46.360000 --> 0:09:48.260000
 Okay, so here's your pricing.

0:09:48.260000 --> 0:09:52.760000
 Basic is 16 cents, US,
 East US, right now.

0:09:52.760000 --> 0:09:55.980000
 Standard, more expensive, premium,
 more expensive than that.

0:09:55.980000 --> 0:09:57.980000
 That's per day though,
 that's still not bad.

0:09:57.980000 --> 0:10:02.280000
 You can see increasing
 amounts of storage.

0:10:02.280000 --> 0:10:05.180000
 Also, webhooks, so you
 can automate processes.

0:10:05.180000 --> 0:10:09.480000
 And if you go to premium, you have
 geo-replication capabilities.

0:10:09.480000 --> 0:10:13.980000
 And again, geo-replication, giving you
 multiple copies, giving you really

0:10:13.980000 --> 0:10:16.640000
 an added security benefit.

0:10:16.640000 --> 0:10:21.980000
 Okay, anyways, we'll stick
 for this with standard.

0:10:21.980000 --> 0:10:23.560000
 And then networking.

0:10:23.560000 --> 0:10:29.180000
 Okay, you cannot connect
 this using to a private.

0:10:29.180000 --> 0:10:30.940000
 I don't have this set up.

0:10:30.940000 --> 0:10:35.200000
 It's only available for premium.

0:10:35.200000 --> 0:10:38.820000
 So let's go back, let's go and do
 premium, just so you can see that.

0:10:38.820000 --> 0:10:45.280000
 There we go. Now, I could
 create a private endpoint.

0:10:45.280000 --> 0:10:50.960000
 Okay, and control and restrict access
 to my container registry.

0:10:50.960000 --> 0:10:52.400000
 I'm gonna do that right now.

0:10:52.400000 --> 0:10:55.660000
 Encryption, your data is encrypted, but
 you also have the ability to have

0:10:55.660000 --> 0:11:02.360000
 a custom managed key, which I can either
 have in Key Vault or enter a

0:11:02.360000 --> 0:11:07.540000
 direct key URI. But I'm fine
 with their management of it.

0:11:07.540000 --> 0:11:09.740000
 Should add tags, but
 I'm not going to.

0:11:09.740000 --> 0:11:12.480000
 And at that point,
 I would create it.

0:11:12.480000 --> 0:11:17.320000
 All right, so that's all
 the setup for a registry.

0:11:17.320000 --> 0:11:20.700000
 All right, next, I'm gonna go to my
 existing registry that I've already

0:11:20.700000 --> 0:11:25.780000
 provisioned. And I'm gonna take
 a look at the registry itself.

0:11:25.780000 --> 0:11:29.560000
 And in particular, I'm gonna
 go to access control.

0:11:29.560000 --> 0:11:33.400000
 And let's say I wanted
 to grant access.

0:11:33.400000 --> 0:11:37.900000
 I'm gonna see if I can zoom
 in a little bit on that.

0:11:37.900000 --> 0:11:39.940000
 Okay, there are a few roles.

0:11:39.940000 --> 0:11:43.980000
 And if you're studying, for an example,
 probably want to look these up.

0:11:43.980000 --> 0:11:47.040000
 Some of them are pretty self
-evident, like ACR delete.

0:11:47.040000 --> 0:11:51.460000
 There are right now, what do I think,
 seven, six or seven, six.

0:11:51.460000 --> 0:11:56.380000
 Six different roles that are specific
 to the data plane of Azure Container

0:11:56.380000 --> 0:11:59.560000
 Registry. There's delete,
 there's image signer.

0:11:59.560000 --> 0:12:01.960000
 So if you're using signed images and
 you want some to be able to sign

0:12:01.960000 --> 0:12:04.460000
 them, but that's maybe
 all you want.

0:12:04.460000 --> 0:12:06.640000
 There's pull, there's push.

0:12:06.640000 --> 0:12:08.460000
 There's also quarantine.

0:12:08.460000 --> 0:12:12.280000
 So if you've got quarantine set up
 with your vulnerability assessment,

0:12:12.280000 --> 0:12:17.140000
 then you have the ability
 to implement that.

0:12:17.140000 --> 0:12:22.540000
 And so I could add, let's say, for
 example, ACR pull, and then I could

0:12:22.540000 --> 0:12:25.720000
 add that to some user account.

0:12:25.720000 --> 0:12:29.800000
 I'm not going to because I don't
 want to just jump things up.

0:12:29.800000 --> 0:12:35.880000
 Okay, now I also, as it turns out,
 I'm going to come down here.

0:12:35.880000 --> 0:12:39.260000
 I've got a number of repositories.


0:12:39.260000 --> 0:12:42.660000
 And I'm just going to go kind
 of randomly to one of them.

0:12:42.660000 --> 0:12:50.680000
 This has a lot of versions, so I've got
 this set up with a CI CD workflow.

0:12:50.680000 --> 0:12:54.000000
 And I've got a Docker
 pull command for this.

0:12:54.000000 --> 0:13:03.180000
 So let's say that I wanted to retrieve
 this particular image from this

0:13:03.180000 --> 0:13:16.440000
 ACR. Okay, now as it turns out, I have
 Docker installed on my own system

0:13:16.440000 --> 0:13:19.880000
 here. Let's bring that
 up a little bit.

0:13:19.880000 --> 0:13:22.600000
 Okay, and, it's entirely possible.


0:13:22.600000 --> 0:13:24.800000
 I'll make sure I had everything
 right before I did this.

0:13:24.800000 --> 0:13:27.800000
 All right, so we'll go ahead
 and we'll put that in.

0:13:27.800000 --> 0:13:29.040000
 And I get an error.

0:13:29.040000 --> 0:13:33.080000
 Error response tells me unauthorized
 authentication required.

0:13:33.080000 --> 0:13:34.400000
 Now here's the cool thing.

0:13:34.400000 --> 0:13:39.520000
 So I'm using Azure AD authentication,
 but Docker doesn't know what Azure

0:13:39.520000 --> 0:13:41.320000
 ID authentication is.

0:13:41.320000 --> 0:13:51.000000
 So if I have the Azure CLI, we'll
 drill down into this a little bit.

0:13:51.000000 --> 0:13:57.260000
 I'm going to azacrhelp.

0:13:57.260000 --> 0:14:03.140000
 And here are the different things
 that I've got azacr log in.

0:14:03.140000 --> 0:14:05.340000
 So let's take a look at that.

0:14:05.340000 --> 0:14:19.780000
 Okay, so when I go azacr log in, I need
 to specify the name of a registry.

0:14:19.780000 --> 0:14:25.180000
 Now I could also, if I'm using that
 administrative user, I can put in

0:14:25.180000 --> 0:14:26.480000
 the username and password to that.


0:14:26.480000 --> 0:14:31.660000
 If I don't put in the username and
 password, then it's going to assume

0:14:31.660000 --> 0:14:34.460000
 that I want to use Azure
 AD authentication.

0:14:34.460000 --> 0:14:36.580000
 So let's go ahead and do that.

0:14:36.580000 --> 0:14:55.940000
 I need demos. Okay, so I have now
 used the Azure CLI to log me in.

0:14:55.940000 --> 0:15:00.800000
 Now I go back to that same
 Docker pull command.

0:15:00.800000 --> 0:15:04.660000
 And now it's pulling.

0:15:04.660000 --> 0:15:10.960000
 The cool thing is I am now logged
 in to that ACR on my machine.

0:15:10.960000 --> 0:15:14.980000
 In fact, before this demonstration,
 I had to remember to log out.

0:15:14.980000 --> 0:15:18.680000
 It was kind of what that upper information
 was that was on the screen

0:15:18.680000 --> 0:15:21.360000
 when I first popped over here, because
 I remembered to log out for the

0:15:21.360000 --> 0:15:23.200000
 demonstration, but I
 forgot to clear that.

0:15:23.200000 --> 0:15:24.680000
 So my apologies.

0:15:24.680000 --> 0:15:26.620000
 But in any case, it's
 cranky now, right?

0:15:26.620000 --> 0:15:28.240000
 Awesome. We're good to go.

0:15:28.240000 --> 0:15:32.620000
 Now let's go back and take
 in a little more content.

0:15:32.620000 --> 0:15:36.860000
 So we've gone through and seen
 Azure ACR authentication.

0:15:36.860000 --> 0:15:43.300000
 The next thing I'm going to do is I'm going
 to talk about container isolation.

0:15:43.300000 --> 0:15:48.060000
 Now with containers, right, if we think
 about containers and we think

0:15:48.060000 --> 0:15:55.020000
 about kind of the traditional environment
 for containers, I've got, and

0:15:55.020000 --> 0:15:59.340000
 I'm going to freehand this, so part
 of my inability to draw a straight

0:15:59.340000 --> 0:16:03.140000
 line. All right, let's say I'm
 on a physical host, right?

0:16:03.140000 --> 0:16:06.300000
 And the physical host's
 got a BIOS.

0:16:06.300000 --> 0:16:14.240000
 It's got an operating system.

0:16:14.240000 --> 0:16:18.580000
 It's got a container
 management system.

0:16:18.580000 --> 0:16:21.000000
 We'll say Docker.

0:16:21.000000 --> 0:16:28.760000
 And above that, I've
 got my containers.

0:16:28.760000 --> 0:16:35.460000
 Now these containers are logically isolated,
 but they're still using the

0:16:35.460000 --> 0:16:37.000000
 same kernel, right?

0:16:37.000000 --> 0:16:40.040000
 And so that looks like
 a scary robot.

0:16:40.040000 --> 0:16:45.000000
 But aside from that, they're
 still using the same kernel.

0:16:45.000000 --> 0:16:50.740000
 So that could be somewhat problematic
 from a security standpoint.

0:16:50.740000 --> 0:16:53.180000
 You could argue either direction.

0:16:53.180000 --> 0:17:02.820000
 There is within Windows containerization,
 another solution.

0:17:02.820000 --> 0:17:06.880000
 And let's say that I'm in Azure.

0:17:06.880000 --> 0:17:09.500000
 And so I've got Azure.

0:17:09.500000 --> 0:17:20.180000
 And I've got a VM
 running in Azure.

0:17:20.180000 --> 0:17:29.200000
 Now I could install Docker directly
 on that, but I can also run hyper

0:17:29.200000 --> 0:17:37.720000
 V. All right, I'm going to say hyper
 V D because I can run hyper V and

0:17:37.720000 --> 0:17:43.840000
 Docker. And then when I'm running containers,
 those containers are actually

0:17:43.840000 --> 0:17:50.380000
 OS isolated because they're each running
 as their own independent virtual

0:17:50.380000 --> 0:17:53.220000
 machine. So I'm running them as virtual
 machines, essentially inside of

0:17:53.220000 --> 0:17:57.420000
 a virtual machine,
 giving me OS level.

0:17:57.420000 --> 0:18:06.340000
 Let's see here, get
 back away from that.

0:18:06.340000 --> 0:18:11.340000
 Ah, there we go.

0:18:11.340000 --> 0:18:18.180000
 So that hyper V isolation, by the way,
 is a standard element of Windows

0:18:18.180000 --> 0:18:20.320000
 server containerization.

0:18:20.320000 --> 0:18:26.740000
 Okay, but it also works
 for container instances.

0:18:26.740000 --> 0:18:34.740000
 Okay. Now, if you are running IAS,
 IAS by definition is giving you VM

0:18:34.740000 --> 0:18:36.280000
 level isolation, right?

0:18:36.280000 --> 0:18:38.960000
 You don't necessarily need to have
 that hyper V on top of it.

0:18:38.960000 --> 0:18:43.400000
 Although you can, if you're running
 Windows virtual machines, if you've

0:18:43.400000 --> 0:18:47.100000
 got, there's a lot that needs to go
 into, but you can run hyper V on a

0:18:47.100000 --> 0:18:51.100000
 virtual machine that's on Azure and
 so you could take advantage of that

0:18:51.100000 --> 0:18:58.120000
 isolation. You also, if you want really
 the highest level of isolation,

0:18:58.120000 --> 0:19:01.340000
 Azure does offer Azure
 dedicated hosts, right?

0:19:01.340000 --> 0:19:03.820000
 And what that means is exactly
 what it sounds like.

0:19:03.820000 --> 0:19:07.860000
 You are going to get physical hosts
 that are dedicated specifically to

0:19:07.860000 --> 0:19:12.320000
 you. Okay, giving you really that isolation
 down to the hardware level.

0:19:12.320000 --> 0:19:20.140000
 If you need that much isolation,
 that capability is in fact there.

0:19:20.140000 --> 0:19:26.620000
 Now, the next thing that I want to
 talk about is container networking.

0:19:26.620000 --> 0:19:30.720000
 Now, there's a few things with container
 networking, one of which you

0:19:30.720000 --> 0:19:34.920000
 already saw. And that is the Azure Container
 Registry has its own service

0:19:34.920000 --> 0:19:40.380000
 endpoint. Okay. Currently in
 preview, but it is there.

0:19:40.380000 --> 0:19:44.540000
 Also, if you're running infrastructure
 as a service, you have the standard

0:19:44.540000 --> 0:19:46.720000
 networking. It is
 a virtual machine.

0:19:46.720000 --> 0:19:48.540000
 It is running on a
 virtual network.

0:19:48.540000 --> 0:19:53.360000
 You can choose to have a public
 IP address or not to.

0:19:53.360000 --> 0:19:58.980000
 And then what you can do is you can
 use that in conjunction with your

0:19:58.980000 --> 0:20:03.740000
 Docker networking definition
 and designation.

0:20:03.740000 --> 0:20:05.480000
 Okay. Container instances.

0:20:05.480000 --> 0:20:10.960000
 If you're using container instances,
 then you have port mapping.

0:20:10.960000 --> 0:20:12.520000
 That's really what you have.

0:20:12.520000 --> 0:20:14.240000
 There's nothing beyond that.

0:20:14.240000 --> 0:20:16.680000
 So right now, just
 be aware of that.

0:20:16.680000 --> 0:20:18.920000
 Now, there is a plugin.

0:20:18.920000 --> 0:20:23.560000
 The Azure Virtual Network Container
 Network Interface plugin, which is

0:20:23.560000 --> 0:20:25.140000
 kind of hard to say.

0:20:25.140000 --> 0:20:30.060000
 What this plugin does
 is it sets it up.

0:20:30.060000 --> 0:20:34.700000
 You install this plugin
 in your virtual machine.

0:20:34.700000 --> 0:20:38.680000
 Okay. Or you use it
 with Kubernetes.

0:20:38.680000 --> 0:20:42.720000
 Okay. So if I'm running infrastructure
 as a service, I can install this

0:20:42.720000 --> 0:20:44.560000
 on a Docker host.

0:20:44.560000 --> 0:20:50.820000
 And what it's going to do is every
 time I create a new container, it's

0:20:50.820000 --> 0:20:56.920000
 actually going to map that container
 to a new private IP address on a

0:20:56.920000 --> 0:20:57.740000
 virtual network.

0:20:57.740000 --> 0:21:03.260000
 And so now, instead of having one virtual
 IP address and then kind of

0:21:03.260000 --> 0:21:12.820000
 delegating out ports to differentiate
 any network communication, now each

0:21:12.820000 --> 0:21:17.680000
 one of your containers could have its
 own private IP address in the virtual

0:21:17.680000 --> 0:21:19.800000
 network and you can go from there.


0:21:19.800000 --> 0:21:27.480000
 This works well, frankly,
 in Kubernetes service.

0:21:27.480000 --> 0:21:33.200000
 It's fine. Personally, I have found
 that if you're using infrastructure

0:21:33.200000 --> 0:21:36.560000
 as a service, if you're using your own
 Docker host, I don't really find

0:21:36.560000 --> 0:21:38.660000
 this network plugin worthwhile.

0:21:38.660000 --> 0:21:43.020000
 And the reason why is because it's really
 not that hard to configure the

0:21:43.020000 --> 0:21:44.560000
 networking on your own.

0:21:44.560000 --> 0:21:49.700000
 And that is actually what I'm going
 to show you in the next demo.

0:21:49.700000 --> 0:21:54.780000
 And what I'm going to do with this
 demo is I have a virtual machine in

0:21:54.780000 --> 0:21:58.760000
 Azure that is running Docker.

0:21:58.760000 --> 0:22:03.280000
 It's a Ubuntu machine, I think 1804,
 doesn't really matter, but it's a

0:22:03.280000 --> 0:22:05.660000
 Ubuntu machine that
 is running Docker.

0:22:05.660000 --> 0:22:10.780000
 And what I want to do is I want
 to fire up a container.

0:22:10.780000 --> 0:22:15.180000
 And I want to use Docker's port mapping
 capability so that that container

0:22:15.180000 --> 0:22:20.240000
 has an active port on
 the VM host itself.

0:22:20.240000 --> 0:22:25.040000
 Then I'm going to tie that in
 to an application gateway.

0:22:25.040000 --> 0:22:29.440000
 And I'll use the application gateway
 that has the web application firewall

0:22:29.440000 --> 0:22:36.760000
 already configured to allow access, but
 allow protected access to my individual

0:22:36.760000 --> 0:22:39.460000
 container. So a few
 moving parts there.

0:22:39.460000 --> 0:22:40.560000
 I've got the container.

0:22:40.560000 --> 0:22:43.160000
 It's on a VM host running Docker.

0:22:43.160000 --> 0:22:47.760000
 And I've got a application gateway
 set up in that network.

0:22:47.760000 --> 0:22:49.260000
 And I'll show you all of this.

0:22:49.260000 --> 0:22:51.080000
 But that's really what
 I'm going to do.

0:22:51.080000 --> 0:22:55.900000
 So I'll simple container excuse me
 that has a web application and then

0:22:55.900000 --> 0:23:00.080000
 make sure that I can get to that web application
 via my application gateway.

0:23:00.080000 --> 0:23:05.720000
 Let's take a look at
 this demonstration.

0:23:05.720000 --> 0:23:17.000000
 Okay. If I go to my container now,
 I am connected to my container.

0:23:17.000000 --> 0:23:19.380000
 You probably can't see this.

0:23:19.380000 --> 0:23:23.960000
 But what I'm about to run, I've got
 this up in a text file, making it

0:23:23.960000 --> 0:23:25.060000
 nice and simple.

0:23:25.060000 --> 0:23:26.920000
 All right. I've got a Docker run.

0:23:26.920000 --> 0:23:28.420000
 It's going to run
 in the background.

0:23:28.420000 --> 0:23:38.160000
 And I'm mapping port 8080 on the actual
 host to port 80 of the actual

0:23:38.160000 --> 0:23:41.660000
 container. Given a name.

0:23:41.660000 --> 0:23:46.220000
 And then I'm basing it off of some
 instance, just simple instance.

0:23:46.220000 --> 0:23:54.420000
 And I run this. And it starts up now,
 I'm going to make a slight variation.

0:23:54.420000 --> 0:23:58.980000
 I'm going to run a second
 instance of this.

0:23:58.980000 --> 0:24:01.780000
 Cleverly named demo one.

0:24:01.780000 --> 0:24:06.020000
 I'm just going to
 map that to 81 81.

0:24:06.020000 --> 0:24:09.720000
 A little cavalier, but it'll work.


0:24:09.720000 --> 0:24:12.380000
 Okay. And now even though you may not
 be able to see it's a little small,

0:24:12.380000 --> 0:24:20.740000
 but if I run a Docker PS, you should
 see that I've got two containers

0:24:20.740000 --> 0:24:27.420000
 running. One is mapped to port 8080
 and the other's mapped to port 8081.

0:24:27.420000 --> 0:24:29.040000
 They do the same thing.

0:24:29.040000 --> 0:24:31.860000
 Now the reason why it's so small, and
 I didn't just say, oh, let me just

0:24:31.860000 --> 0:24:35.980000
 SSH into that, is because I really tried
 to implement some basic security

0:24:35.980000 --> 0:24:39.540000
 measures. And I'm going
 to take a look at that.

0:24:39.540000 --> 0:24:46.200000
 Okay. Here is the resource group that I've
 got for this particular container.

0:24:46.200000 --> 0:24:48.480000
 And what I'm going to do is I'm going
 to pop into the container itself

0:24:48.480000 --> 0:24:52.480000
 and notice a couple things.

0:24:52.480000 --> 0:24:55.380000
 Oh, I did actually, I
 meant to take away.

0:24:55.380000 --> 0:24:56.220000
 Ah, there we go.

0:24:56.220000 --> 0:25:03.060000
 Even though I do have a public IP address,
 and I did allow port 8080 access.

0:25:03.060000 --> 0:25:06.180000
 Okay. So I can get
 access that way.

0:25:06.180000 --> 0:25:10.760000
 Notice that there's no port
 22, so I can't just SSH in.

0:25:10.760000 --> 0:25:14.300000
 All right. So if I wanted to test that,
 I could take this public IP here

0:25:14.300000 --> 0:25:27.080000
 and go to 8080. And there we go.

0:25:27.080000 --> 0:25:29.960000
 Now I've got access, but that really
 kind of violates what I was talking

0:25:29.960000 --> 0:25:34.940000
 about. I don't want direct public
 access to that virtual machine.

0:25:34.940000 --> 0:25:41.200000
 So instead, what I could do is I could
 go to my VM and I could remove

0:25:41.200000 --> 0:25:46.600000
 this rule. I'm going
 to delete that rule.

0:25:46.600000 --> 0:25:54.480000
 Now, I'm not going to try it again right
 away because it sometimes takes

0:25:54.480000 --> 0:26:00.960000
 a few minutes for the NSG rules, network
 security group rules to fully

0:26:00.960000 --> 0:26:02.940000
 propagate. Okay.

0:26:02.940000 --> 0:26:06.480000
 But that will prevent
 direct access.

0:26:06.480000 --> 0:26:10.220000
 Now in the meantime,
 go back up here.

0:26:10.220000 --> 0:26:17.020000
 All right. I want to notice my
 private IP address is 10.0.1.4.

0:26:17.020000 --> 0:26:22.040000
 I also happen to have an
 application gateway.

0:26:22.040000 --> 0:26:29.080000
 All right. So I've got an application
 gateway set up.

0:26:29.080000 --> 0:26:36.080000
 And if I take a look, notice that
 I've got WAF version two.

0:26:36.080000 --> 0:26:38.640000
 So that's the web application
 firewall.

0:26:38.640000 --> 0:26:41.340000
 I've got two instances
 of this running.

0:26:41.340000 --> 0:26:44.880000
 So I could configure my web
 application firewall.

0:26:44.880000 --> 0:26:48.100000
 Now I've got a back end pool.

0:26:48.100000 --> 0:26:52.980000
 And the back end pool
 has one item.

0:26:52.980000 --> 0:26:56.380000
 And I've got a back end target.

0:26:56.380000 --> 0:27:01.720000
 And I've got the virtual machine,
 which is the container.

0:27:01.720000 --> 0:27:05.320000
 Okay. That's my back end pool.

0:27:05.320000 --> 0:27:09.980000
 All right. Now I've got a front
 end IP configuration.

0:27:09.980000 --> 0:27:11.560000
 I've got a public IP address.

0:27:11.560000 --> 0:27:14.040000
 And you can see that
 public IP address.

0:27:14.040000 --> 0:27:18.420000
 I've got listeners.

0:27:18.420000 --> 0:27:21.180000
 I have a web app listener.

0:27:21.180000 --> 0:27:26.840000
 Okay. And the web app listener
 is listening to port 80.

0:27:26.840000 --> 0:27:29.220000
 It's a basic listener.

0:27:29.220000 --> 0:27:36.980000
 Pretty simple. And if I go
 to rules, I have one rule.

0:27:36.980000 --> 0:27:40.900000
 And what it's going to do, it's going
 to take that web app listener, which

0:27:40.900000 --> 0:27:47.700000
 again, is listening to my public endpoint
 on the application gateway.

0:27:47.700000 --> 0:27:54.040000
 And it's going to map it to my back
 end target, which is just that web

0:27:54.040000 --> 0:27:56.600000
 app, which is my container
 machine.

0:27:56.600000 --> 0:28:00.500000
 And it has HTTP settings.

0:28:00.500000 --> 0:28:01.680000
 Okay. So what are those?

0:28:01.680000 --> 0:28:03.380000
 A lot of parts to this.

0:28:03.380000 --> 0:28:07.380000
 If I go to HTTP settings.

0:28:07.380000 --> 0:28:11.380000
 Here I've got my back end port.

0:28:11.380000 --> 0:28:12.480000
 So there it is right there.

0:28:12.480000 --> 0:28:14.480000
 It's mapping to port 8080.

0:28:14.480000 --> 0:28:18.500000
 And that's really what
 I care about most.

0:28:18.500000 --> 0:28:25.460000
 And I'm going to override with the
 request with whatever the host name

0:28:25.460000 --> 0:28:28.660000
 is from the back end target,
 which is fine.

0:28:28.660000 --> 0:28:30.460000
 Not going to use a custom probe.

0:28:30.460000 --> 0:28:35.320000
 So I've got the end of the day, I've
 got this application gateway setup

0:28:35.320000 --> 0:28:42.100000
 to provide access over port 80
 to that back end container.

0:28:42.100000 --> 0:28:45.820000
 And so what I'm going to do is I'm
 going to make sure that works.

0:28:45.820000 --> 0:28:54.560000
 And there we go.

0:28:54.560000 --> 0:28:58.840000
 So I went through that and I got
 to that back end container.

0:28:58.840000 --> 0:29:04.480000
 So that's this is what the container
 that's running on my back end server

0:29:04.480000 --> 0:29:05.900000
 is actually doing.

0:29:05.900000 --> 0:29:07.220000
 And it got to itself.

0:29:07.220000 --> 0:29:08.420000
 And that's fantastic.

0:29:08.420000 --> 0:29:12.920000
 Now in this case, now that I know I've
 got the application gateway, really

0:29:12.920000 --> 0:29:18.960000
 at this point, what I would want to
 do is simply go back to that network

0:29:18.960000 --> 0:29:26.680000
 interface and go to my IP configuration
 for that network interface and

0:29:26.680000 --> 0:29:29.880000
 actually disassociate
 the public IP.

0:29:29.880000 --> 0:29:38.660000
 Right. And so now there is no direct public
 access to my Docker host that's

0:29:38.660000 --> 0:29:39.960000
 running my container.

0:29:39.960000 --> 0:29:43.760000
 Instead, any public access is going through
 the application gateway, which

0:29:43.760000 --> 0:29:47.040000
 is running the web application firewall,
 making sure that it's looking

0:29:47.040000 --> 0:29:48.620000
 for common threats.

0:29:48.620000 --> 0:29:53.040000
 Right. And just in general, not giving
 direct access to that underlying

0:29:53.040000 --> 0:29:54.760000
 virtual machine.

0:29:54.760000 --> 0:29:57.860000
 Furthermore, I've got
 bastion set up.

0:29:57.860000 --> 0:30:01.420000
 So I don't need to get
 to that via port 22.

0:30:01.420000 --> 0:30:03.380000
 I don't have a gateway.

0:30:03.380000 --> 0:30:05.760000
 I don't have a VPN gateway or
 an express route gateway.

0:30:05.760000 --> 0:30:09.060000
 So I'm just going through the portal,
 but that still gives me more security.

0:30:09.060000 --> 0:30:12.660000
 And that's really what you want to think
 about when you're dealing with

0:30:12.660000 --> 0:30:15.540000
 containerized solutions and you're
 thinking about securities.

0:30:15.540000 --> 0:30:17.440000
 OK, I've got this container.

0:30:17.440000 --> 0:30:19.540000
 It's running an Azure.

0:30:19.540000 --> 0:30:20.940000
 What do I need to do?

0:30:20.940000 --> 0:30:24.280000
 Well, I've shown you the
 Azure things you can do.

0:30:24.280000 --> 0:30:27.900000
 Right. But particularly if you're running
 this in infrastructure as a

0:30:27.900000 --> 0:30:30.880000
 service, you also to keep in mind that
 you're going to be responsible

0:30:30.880000 --> 0:30:33.260000
 for the operating
 system and above.

