WEBVTT

00:13.290 --> 00:14.150
Hello.

00:14.370 --> 00:18.100
My name is she had from Teach Epix.

00:18.180 --> 00:27.780
We welcome you all to Cisco firewalls course in this video we will cover introduction to firewalls technologies

00:28.140 --> 00:32.360
and services which is part of Cisco firewalls.

00:32.360 --> 00:42.860
Course by the end of this video you will be able to understand the main concepts of firewalls and why

00:42.920 --> 00:46.440
we need a firewall in our network.

00:46.490 --> 00:50.110
So let's start our presentation here

00:54.190 --> 01:04.930
as we may all hurt a firewall is considered a security device that monitors incoming and outgoing network

01:04.930 --> 01:12.030
traffic and decides to either allow or block specific traffic.

01:12.190 --> 01:21.940
And this is of course based on a defined set of rules firewalls has been has been used for the past

01:21.970 --> 01:34.550
25 years as a security solution and a firewall can be either a hardware or software or even both

01:37.390 --> 01:42.130
as we can see here in this figure.

01:42.260 --> 01:45.580
This is a firewall here.

01:45.600 --> 01:56.150
This is our internal network and this is the outside world which is mainly the internet so the firewall

01:56.150 --> 02:05.810
here represents a barrier between your Insight Network and the outside world

02:10.930 --> 02:12.880
so why do we need the firewalls

02:16.240 --> 02:27.520
as we can see in this figure we have here our inside which we consider a trusted network and the outside

02:27.520 --> 02:32.920
world which we consider untrusted because we don't know what's coming from there.

02:34.180 --> 02:45.230
So here is the firewall between our trusted and the untrusted outside world which is mainly the Internet

02:47.690 --> 02:58.150
so we can see the purpose of the firewall is to control what traffic is allowed to pass from one side

02:58.150 --> 03:05.750
to another either from the outside to the inside or even from the inside to the outside

03:09.640 --> 03:20.860
a firewall come block traffic intended for a particular IP address or server ports which means if I

03:20.860 --> 03:33.050
have here my internal network and I have specific requirements in my company that outside users cannot

03:33.710 --> 03:43.930
access some or all of the internal servers for example the internal Web server or the Internal DNS server.

03:44.750 --> 03:56.360
So I can configure a firewall rule here to block traffic from the outside to the inside.

03:56.530 --> 04:06.900
Of course every company has its own technical requirements so mainly we can see any firewall as a general

04:06.900 --> 04:13.680
rule has two network interfaces or two connection sites one

04:16.390 --> 04:22.630
interface is connected to the outside world which is the external side and the other side is connected

04:22.630 --> 04:27.920
to the inside network or your local LAN

04:32.800 --> 04:34.630
in our next video.

04:34.870 --> 04:41.440
We will cover the general firewall characteristics.

04:41.520 --> 04:43.980
I hope you enjoy the video.

04:43.980 --> 04:45.750
Thank you very much for watching.
