OK, finally, we got to the part where we will install our machine with all the interesting hacking
tools that we will use, hopefully you're excited since by the end of this video you will have your
Linux machine running and ready to use.
Here in our virtual box, in order to start the process of installation, we must first select our virtual
machine and then click on the start button right here.
This will start up a virtual machine and it will start the process of installation of operating system.
OK, so let me enlarge this, even though the screen of the installation will stay smaller size, but
that is just during the installation.
So don't worry.
And right here in the installer menu, we're interested in two different options, either graphical
install or install.
They're pretty much the same, just graphical install is prettier.
So that's why we are going to go with that one here, enter.
The next thing it asks us is to choose the language and for the purposes of discourse, I will proceed
with English and you can pick whichever language you want.
So just select whichever language you want.
I will select English and I will continue.
In the education part, this is only important if you want to have the correct time zone correspondent
with your country and right here, it also tells us that these countries from which we can choose are
strictly based on the language that we picked in the previous step.
So in case your country is not on the list like my isn't, you can go right here on other and select
your country.
If it is on the list, select it and click on continue.
Now, since this really isn't that important step, I will just proceed with the United States.
And here, under the configuration of the keyboard, I will select American English and I will click
on CONTINUE.
After setting up our keyboard, the installation process will configure some staff required for our
machine to run, and you will notice most of the stuff is done automatically.
So we don't need to worry about it too much whenever a certain question pops up.
I will tell you what you need to select to proceed to the next step of installation.
OK, so after a few seconds, here is the first question, let us read what it wants from us.
So it says, Please enter the hostname for the system.
And the course name is a single word that identifies your system to the network.
If you don't know what your host name should be, consult your network administrator.
If you're setting up your own home network, you can make something up here.
OK, so we're not network administrators, therefore we can just make something up as a hostname, so
let let's just go with Kelly.
Why not and let us go on, continue.
Domain name, this is something that we want to leave empty, so just delete everything right here and
proceed to the next step.
OK, so we got set up users and passwords step.
Now, in the previous versions of Linux, it usually asked you to set up the password for the root account.
And unlike, for example, on Windows, we got the user accounts and administrator on Linux, we got
the user accounts and a router account, what a router counties is basically the same as an administrator
in Windows.
It has elevated privileges.
It can execute commands that users account cannot execute.
And in this newest version of Linux, we're required to set up a user account.
So here we got the step where we need to specify full name for the new user.
And it tells us that specifying our full name would be a reasonable choice.
And if it was any other course, instead of a hacking course, I would also tell you to specify your
name here.
But I must teach you to also think like a hacker.
And we hackers want to stay as low key as possible.
So specifying our real name is not an option for us here.
We can just make something up instead.
Let us go with Mr. Hacker.
Why not let silicone continue and the user name, we can also leave to be Mr. Hacker, there's nothing
really to change here.
Of course, if you want, you can specify something other than Mr. Hacker.
It is completely up to you.
Just make sure you remember the user name since you will need it to log into your machine after the
installation.
So I will leave it on Mr. Hacker and click on CONTINUE.
And here is a step where we need to choose a password now, password is the important stuff.
We must make sure we choose a strong password for any type of account we create.
Let me tell you one interesting fact.
A lot of black hat hackers were caught because they had a weak password.
We are white hat hackers, but it is still a good practice to always choose a long and strong password.
So let us do it.
I will type mine right here.
And free, enter the password, I will type it once again.
You can choose any passport that you want in case you want to make sure that you typed what you wanted
to type, you can click right here, show password and clear as well as in the second step.
You can also check your password in clear.
And after you change your password, you can click on continue.
So here, configure the clock, you can select your time zone, our go with Eastern.
And here, after loading a few more additional components, ask us about this partitioning here in the
partitioning disk, we have a few options and we are interested in the first one which is guided to
use entire disk.
We're not really interested in encrypted hard disks or anything like that.
So just select using our disk and click on continue.
Here we get the warning that all data on the disk you select will be erased, and this right here is
a hard disk that we created in the previous video when I created my virtual machine.
And you remember that I gave around 30 gigabytes to my virtual hard disk.
So this is that one.
And I will select it and click and continue.
Here, it gives us some of the options as to how this can be partitioned.
We will proceed with the first option, which is all files in one partition, which is also recommended
for new users.
Don't worry about these other two options which mention slash home slash VA slash DMP.
These are all just standard Linux directories, which we will see shortly after installation.
So just click right here.
All files in one petition we can continue.
The final steps are finished partitioning and five changes to this we want to click on continue there
as well.
And right here, it will just ask us, are we sure that we want to ride the changes to the disk we want
to select right here?
Yes.
And we want to click on CONTINUE.
So after have to continue, the installation process will start and it will take some time, it can
take possibly around 20 to 30 minutes, maybe even longer.
And it will also ask us a couple more questions.
In meantime.
I will fast forward to the first question that pops up and you just pause the video until you get to
that step of installation.
OK, so here is the next question, configuring the package manager and it asks us for the HTTP proxy
information, leave blank for none and we do want to leave blank.
So we are not going to type anything here.
And we are going to click on CONTINUE.
Here in this ultra selection, we want to leave all of the check things and we also want to add the
large option.
So leave everything checked that you see right here and click right here on large.
What this will do is it will install additional tools in our clinics and we want as many hacking tools
installed with our operating system so we don't have to waste time installing them later on.
So just double check that all of these options of check, desktop environment X, FCC, these lower
three and Delarge option as well should be checked.
After you get all of that, they can continue.
And this step of installing software will take some time.
So just go grab a cup of coffee or take some snack and I will see you in around 20 to 30 minutes.
OK, so after a long, long installation, here is another question and it asks us, should we install
the great bootloader to the master?
Both record.
First of all, what is Grupp?
Well, KRUP Bootloader is a software that load's Linux kernel, it is the first software that started
that system, but.
Let us read what it asks us here.
It seems that this new installation is the only operating system on this computer.
If so, it should be safe to install the grapple closer to the master built record of your first heart
rate warning.
If the installer failed to detect another operating system that is present on your computer, modifying
the master boot record will make that operating system temporarily and portable, though GRUP can be
manually configured later to put it.
We want to click here, yes, and you might be asking point, Alexa, but I'm running other operating
systems.
I'm running Mac OS or Windows.
Don't worry.
Remember, this is a virtual machine.
It doesn't know about your main operating system for this virtual machine.
This is the only operating system that is being installed.
So it is safe to select.
Yes.
And proceed to the next step.
And in here, we want to step flesh as the and click on continue.
This will proceed to finish up our installation and it might ask us a question or two more, and then
we should be ready to use our Caledonius machine.
OK, and this final step says installation complete, so it is time to, in turn your system.
Make sure to remove the installation video so that you put into the new system rather than restarting
the installation, since we do not have an installation media.
And this is probably referring to a USB drive in case you install an operating system or USB.
And we didn't install it in virtual machine.
So we can simply just click on continue.
This will finish up the installation and then it will reboot our machine and open up our Linux desktop.
Here it is, our virtual machine is starting up for the first time.
Finally, here is our login screen to our Caledonius machine here, we want to input the username that
we typed in during the installation.
So in my case, it is Mr. Hacker.
And down here you want to input the password that you used during the installation.
Then you can click on login.
And here it is, our first hacking machine.
Now, in case you're wondering, why is it smaller screen, well, to fix that, in most cases you can
simply just do this, lower the screen and then enlarge it once again.
And now it should be in full screen mode.
In case this didn't work, don't worry.
In the next video, we're going to perform some of the checks of our virtual machine to check the Internet
connection, whether it is in full screen mode and other things as well.
So don't worry, if your machine isn't in full screen mode, it will be after the next video.