1
00:00:01,210 --> 00:00:02,060
Hi, everyone.

2
00:00:02,080 --> 00:00:09,160
In this lecture, we are going to talk about the ACP, so dynamic host configuration protocol assigns

3
00:00:09,190 --> 00:00:14,900
IP addresses dynamically, so dynamic host configuration protocol meets the ACP.

4
00:00:15,640 --> 00:00:20,290
So this means that you do not have the same IP address all the time.

5
00:00:20,860 --> 00:00:27,190
So most of the time these IP addresses assignments are on local area network.

6
00:00:27,460 --> 00:00:33,760
So remember that on local area networks we use private IP addresses.

7
00:00:34,270 --> 00:00:39,730
So when each device is connected to the LAN, it must be request an IP address.

8
00:00:40,270 --> 00:00:50,110
So the device that simply sends the request to the DCP servers, then the server will simply assign

9
00:00:50,110 --> 00:00:52,030
the IP address to it.

10
00:00:52,780 --> 00:00:58,890
So each time you connect to the LAN, you are likely to receive a different or dynamic IP address,

11
00:00:59,260 --> 00:01:02,800
but usually the range will be one.

12
00:01:03,950 --> 00:01:07,100
92 one 68.

13
00:01:08,580 --> 00:01:11,280
Door zero zero to.

14
00:01:13,380 --> 00:01:16,650
Two one 92.

15
00:01:17,730 --> 00:01:26,710
One sixty eight door two five five two two five five.

16
00:01:27,060 --> 00:01:38,130
So, guys, if it is not readable, then I'm going to read it one 92 168 dot zero zero and it will be

17
00:01:38,130 --> 00:01:43,490
till 192 168 dot two five 5.5.

18
00:01:43,500 --> 00:01:53,420
So this is the range of DCP when it comes to enlargement of dynamic host configuration protocol.

19
00:01:53,430 --> 00:01:58,020
All we can say, not confusion, protocol, dynamic address allotment.

20
00:01:58,260 --> 00:02:00,330
OK, so guys, this is all for this lecture.

21
00:02:00,330 --> 00:02:01,530
Thank you for watching this lecture.
