1 00:00:00,120 --> 00:00:09,120 Now, let's understand that how we can create the payload for the back door or the payload for the target 2 00:00:09,120 --> 00:00:09,490 machine. 3 00:00:09,510 --> 00:00:13,560 So for that, you need to open your values and tool by spreading. 4 00:00:15,240 --> 00:00:24,000 By just pressing here and hitting the softer entry, we need to see the list of the tools we have inside 5 00:00:24,000 --> 00:00:26,780 this framework, so we have to do so now. 6 00:00:26,830 --> 00:00:30,540 I'm going to type use one and dental. 7 00:00:32,950 --> 00:00:43,720 Was one, and so now, as you can see that we have these many pillows with us, so as we have seen that 8 00:00:44,170 --> 00:00:49,740 we have to use that number of particular pillows and the number. 9 00:00:50,530 --> 00:00:56,920 So now we are going to type here, used 50 and tendo so often. 10 00:00:57,260 --> 00:01:01,510 But as you can see, these many things needed to be completed. 11 00:01:01,910 --> 00:01:05,310 OK, so here are some things that is very important to complete. 12 00:01:05,320 --> 00:01:09,700 Which one of them is and host Albert Sleep. 13 00:01:10,120 --> 00:01:12,220 And one more thing is processor's. 14 00:01:13,030 --> 00:01:20,440 So now let's say the L word is almost almost as nothing, but it is what we can say. 15 00:01:20,440 --> 00:01:23,320 It is the IP address of your machine. 16 00:01:23,350 --> 00:01:28,890 So why do we need to use and also for understanding the use of Elmore's? 17 00:01:29,200 --> 00:01:36,820 Let's suppose that if it is a targeted machine and this is the attacker machine, then when you send 18 00:01:36,820 --> 00:01:44,080 your payload into this particular machine, then if someone just clicked on this particular payload, 19 00:01:44,230 --> 00:01:50,860 it will start connecting with your device and for connecting with your device, it needs something to 20 00:01:50,860 --> 00:01:52,180 connect with your device. 21 00:01:52,190 --> 00:01:54,080 So it needs IP address. 22 00:01:54,100 --> 00:01:56,380 Okay, so that's why we need to sit here. 23 00:01:56,380 --> 00:01:58,840 And Horst, which is an IP address. 24 00:01:58,870 --> 00:02:06,940 OK, so now we understand that how it works, why we need to set and host so far seeing the IP address, 25 00:02:07,210 --> 00:02:15,040 what do we need to do is we need to simply open a new terminal and type it if configured so that we 26 00:02:15,040 --> 00:02:17,160 can see the IP address of our device. 27 00:02:17,350 --> 00:02:22,340 So I'm having IP address then dot, dot, dot, dot six. 28 00:02:22,630 --> 00:02:24,160 So now I'm going to copy it. 29 00:02:26,960 --> 00:02:32,210 And let's get back to our main phenomena, so I'm going to paste it here. 30 00:02:33,580 --> 00:02:34,690 So this is. 31 00:02:38,240 --> 00:02:41,060 This, as my iPad does, that I'm going to. 32 00:02:42,070 --> 00:02:45,190 I think it is not working. 33 00:02:45,220 --> 00:02:50,190 OK, so now I'm going to press enter, so my lawsuit has been set. 34 00:02:50,440 --> 00:02:53,150 So now it's time to set our elbow to elbow. 35 00:02:53,380 --> 00:02:54,080 Going to use it. 36 00:02:54,080 --> 00:02:57,750 But now I will tell you later when I'm using Apiata al-Quds. 37 00:03:01,490 --> 00:03:04,220 OK, so now I'm going to use AT&T. 38 00:03:04,610 --> 00:03:06,530 So now I'm going to press enter. 39 00:03:06,680 --> 00:03:11,270 So now, as you can see, we need to also set processers and sleep. 40 00:03:11,630 --> 00:03:15,190 So these these are not very important. 41 00:03:15,420 --> 00:03:21,970 So I'm not going to explain you very deeply what this processors and what a sleep processor simply means. 42 00:03:21,980 --> 00:03:27,230 A minimum number of processors you want to give to this particular payload and sleep simply means how 43 00:03:27,230 --> 00:03:34,670 much time you want it to just activate on a four processor I'm going to die from. 44 00:03:36,460 --> 00:03:47,290 Says so, and I'm going to give it one for the sleep, I'm going to give it suppose six and Hatano, 45 00:03:47,650 --> 00:03:50,790 so now I think it is completers. 46 00:03:50,800 --> 00:03:53,290 So now I want to see that. 47 00:03:54,290 --> 00:03:55,850 Is it completed or not? 48 00:03:55,880 --> 00:03:58,980 I did something I did one mistake here. 49 00:03:59,270 --> 00:04:02,640 So now let's find out what is the mistake, not the sender. 50 00:04:02,810 --> 00:04:09,890 As you can see that it was not completed because it is saying that you need to use set command for setting 51 00:04:09,890 --> 00:04:10,370 anything. 52 00:04:10,380 --> 00:04:19,910 So for that, I need to add set before any particular book and then seal to zero six. 53 00:04:20,540 --> 00:04:28,670 And I said L code, which is 88 and now said. 54 00:04:30,700 --> 00:04:32,250 Processors. 55 00:04:32,500 --> 00:04:38,740 OK, processors one and said SLE. 56 00:04:39,990 --> 00:04:46,140 Two, six, and tend to not see it is updated or not, so you can see. 57 00:04:48,280 --> 00:04:56,890 We have successfully updated our needed team, so my alost is this airport as this and Processo, I'm 58 00:04:56,890 --> 00:04:59,110 going to give it one and the sleep is one. 59 00:04:59,350 --> 00:05:10,450 So now I'm in confusion that let's check my I.P. address again so that 026 and yes, it is. 60 00:05:11,500 --> 00:05:11,990 Correct. 61 00:05:12,010 --> 00:05:16,120 So now, as you can see here, we have completely done our. 62 00:05:17,190 --> 00:05:21,280 This work, so now I'm going to tie Chinnery and Hatano. 63 00:05:22,020 --> 00:05:27,540 So what it will do, it will just be asking to me that please enter the base name for the output file. 64 00:05:27,780 --> 00:05:30,210 So I'm going to give it reverse. 65 00:05:33,020 --> 00:05:34,850 As deep, deep south. 66 00:05:37,520 --> 00:05:42,080 You'd be scenario to see how much time it will take. 67 00:05:45,500 --> 00:05:48,860 So at the starting building of a back door. 68 00:05:52,080 --> 00:05:57,030 It will take some time and depends upon your system contribution. 69 00:05:58,400 --> 00:05:59,130 And the. 70 00:06:01,030 --> 00:06:05,570 As you can see our head and try to continue. 71 00:06:05,770 --> 00:06:10,430 So as you can see here, this is our file, our payload has been completed. 72 00:06:10,690 --> 00:06:13,190 So now let's get the wider view. 73 00:06:13,450 --> 00:06:17,940 So this is our part where our payload is being seen. 74 00:06:18,430 --> 00:06:23,320 So now let's copy it so that we can use it for the upcoming weeks. 75 00:06:23,590 --> 00:06:25,600 So this is how we can create payload.