1
00:00:00,420 --> 00:00:02,450
Hello, everyone, and Distomo.

2
00:00:02,490 --> 00:00:05,610
I'm going to show you how to create Stenner partitions.

3
00:00:06,970 --> 00:00:09,460
First step, I need to check a list.

4
00:00:09,520 --> 00:00:13,330
The plot devices, some point to under comment in this block.

5
00:00:14,500 --> 00:00:17,630
As you can see here, we have the blog devices on the left side.

6
00:00:17,710 --> 00:00:27,420
For example, is is D.B. as DC and as Didi, I'm going to use this blog device in order to create standard

7
00:00:27,430 --> 00:00:28,150
partitions.

8
00:00:29,260 --> 00:00:33,490
If I would like to run options with the comment Ellis block, I can't run this option.

9
00:00:33,490 --> 00:00:34,060
Dash Dash.

10
00:00:34,120 --> 00:00:40,030
If s in order to show more information about the block device, for example, we have the five system

11
00:00:40,060 --> 00:00:40,540
type.

12
00:00:41,290 --> 00:00:46,630
We have the label here and we have the user I.D. and we have the Mount Point.

13
00:00:46,870 --> 00:00:52,420
So the idea here is associated with the block device and the same thing he did with the launch point,

14
00:00:52,500 --> 00:00:58,490
the slash board, for example, he is associated with the block device or the partition SDK.

15
00:00:58,830 --> 00:00:59,070
What?

16
00:00:59,980 --> 00:01:07,150
So he has you can see it that is dear has two partitions is the one and is the two.

17
00:01:07,510 --> 00:01:09,790
So would this partition the SDP?

18
00:01:09,820 --> 00:01:12,220
I'm going to create three partitions.

19
00:01:13,060 --> 00:01:15,880
Now let's move on to the next step.

20
00:01:16,510 --> 00:01:22,150
Step two, I'm going to run the command F desk in order to create standard partitions.

21
00:01:22,670 --> 00:01:26,080
F this commandment manipulates the disk partition table.

22
00:01:26,920 --> 00:01:28,570
So I'm going to type first.

23
00:01:28,570 --> 00:01:30,160
I'm going to tap Elice Block.

24
00:01:31,390 --> 00:01:34,810
As I said that I'm going to use this lock device.

25
00:01:34,840 --> 00:01:35,410
This DP.

26
00:01:35,410 --> 00:01:41,760
So f desc then slash dev slash is D, B slash.

27
00:01:41,760 --> 00:01:45,010
So then this block there is DBI comes under the slash dev.

28
00:01:45,100 --> 00:01:47,620
So we have to ride the whole bath to enter.

29
00:01:48,740 --> 00:01:52,890
So you can see here before I would like to get more information or help.

30
00:01:54,070 --> 00:01:56,020
How to use the commands inside the disk.

31
00:01:56,140 --> 00:01:57,550
We got to type in.

32
00:01:58,800 --> 00:02:00,150
There's a shortage for help.

33
00:02:00,540 --> 00:02:06,170
Tenter can see we have those litters and we can use those liters, for example, the D.

34
00:02:06,720 --> 00:02:11,480
If we'd like to data partition L Lorqess a list.

35
00:02:11,820 --> 00:02:12,000
No.

36
00:02:12,000 --> 00:02:13,200
One, partition types.

37
00:02:13,670 --> 00:02:20,300
And and if I would like to add a new partition p if I would like to print a partition table to changed

38
00:02:20,310 --> 00:02:22,020
up the partition type.

39
00:02:22,400 --> 00:02:25,320
And the most important thing we have here is two types.

40
00:02:26,010 --> 00:02:36,960
We have the W, DSW or ice tables to disk and exit and a queue quits without serving changes.

41
00:02:37,110 --> 00:02:40,920
So since I'm going to create a new partition, so I'm going to type in.

42
00:02:42,230 --> 00:02:42,590
Enter.

43
00:02:43,720 --> 00:02:44,910
I'm going to use the default here.

44
00:02:44,990 --> 00:02:45,700
The primary.

45
00:02:46,240 --> 00:02:46,690
Yes.

46
00:02:47,530 --> 00:02:49,550
And also I'm going to use a default here.

47
00:02:49,660 --> 00:02:50,160
Default one.

48
00:02:50,320 --> 00:02:51,040
Yes.

49
00:02:52,150 --> 00:02:53,650
This is going to be the first partition.

50
00:02:54,550 --> 00:02:55,390
The first sector.

51
00:02:55,500 --> 00:03:02,230
I'm not going to type anything because it's going to start the partition from the first sector and the

52
00:03:02,230 --> 00:03:02,800
device.

53
00:03:03,640 --> 00:03:10,330
However, in the last sector, I have to indicate the size in order to create that partition.

54
00:03:10,990 --> 00:03:12,280
So I'm going to type here.

55
00:03:12,730 --> 00:03:18,490
Plus five hundred mega, as we can see here, is plus then the size a number.

56
00:03:18,580 --> 00:03:23,740
Then I can pick one of those kilobyte megabyte or gigabyte a terabyte.

57
00:03:24,400 --> 00:03:29,980
And I had inter then P in order to bring the table partition table.

58
00:03:30,130 --> 00:03:33,000
So can see we have the first partition.

59
00:03:33,010 --> 00:03:35,170
Here is D the one.

60
00:03:36,190 --> 00:03:38,020
Now I'm going to add another partition.

61
00:03:39,510 --> 00:03:40,740
Default, yes.

62
00:03:40,810 --> 00:03:46,120
Its primary is default, two years is a second partition, good first sector.

63
00:03:46,140 --> 00:03:49,170
So the first sector for the second partition is going to start.

64
00:03:50,520 --> 00:03:54,630
After the last sector in the phase, partition.

65
00:03:55,710 --> 00:03:56,770
And we hit enter.

66
00:03:58,120 --> 00:04:00,430
Now, I'm going to mention the size here.

67
00:04:00,490 --> 00:04:03,910
Also, five hundred mega for a second partition hit into.

68
00:04:05,230 --> 00:04:06,370
I will say yes.

69
00:04:07,510 --> 00:04:09,850
Don't be too, Brent.

70
00:04:10,750 --> 00:04:14,610
As you can see over here, I have the D.B., too.

71
00:04:16,089 --> 00:04:17,529
And you can see the size here.

72
00:04:17,560 --> 00:04:18,550
And we have the type.

73
00:04:19,240 --> 00:04:22,610
Now, what I'm going to do, I'm going to cure yet the third one.

74
00:04:23,660 --> 00:04:26,960
So the third partition, the three.

75
00:04:26,990 --> 00:04:27,530
Yes.

76
00:04:28,060 --> 00:04:29,690
And is it so the sector.

77
00:04:30,110 --> 00:04:32,450
And the third partition is going to start after.

78
00:04:32,510 --> 00:04:35,240
The last sector and the second partition.

79
00:04:36,130 --> 00:04:40,420
Now, I want also to give the SAS 500 Maiga for the third one to enter.

80
00:04:41,780 --> 00:04:45,700
I'm going to remove the signature because it has a like five system.

81
00:04:45,740 --> 00:04:47,300
So I don't need that file system.

82
00:04:47,380 --> 00:04:49,070
You're also going to delete it.

83
00:04:50,540 --> 00:04:55,010
Dan, I'm going to type B, as we can see over here.

84
00:04:55,880 --> 00:05:01,370
So what we did for the first, the second and the third we wiped because it has a file system.

85
00:05:01,400 --> 00:05:02,900
So I deleted everything.

86
00:05:02,930 --> 00:05:06,490
So I just created a new three partitions, as we can see.

87
00:05:06,500 --> 00:05:06,870
Or for you.

88
00:05:07,280 --> 00:05:14,320
We have the SD B1 as DP two and SD DBC last thing before I'm going to safe.

89
00:05:14,900 --> 00:05:20,570
If I would like to get I'm going to get more information about.

90
00:05:21,580 --> 00:05:24,890
List knowing partition types, I'm going to tell you.

91
00:05:26,080 --> 00:05:31,840
So if I would like to change that type of that partition, so I'm going to type B, as we can see over

92
00:05:31,840 --> 00:05:32,170
here.

93
00:05:32,740 --> 00:05:34,870
This is the type, if I would like to change it.

94
00:05:35,650 --> 00:05:38,040
So I'm going to, for example, Earl here.

95
00:05:38,770 --> 00:05:39,420
Let's change it.

96
00:05:39,460 --> 00:05:42,850
I'm going to change one of them to pay it to 85.

97
00:05:43,360 --> 00:05:48,530
So I'm going to type T before I want to type to use on what you see here.

98
00:05:48,580 --> 00:05:50,220
Change a partition type.

99
00:05:50,470 --> 00:05:54,610
So I'm going to type T hit enter, then default.

100
00:05:54,640 --> 00:05:56,200
So this is the last partition.

101
00:05:56,590 --> 00:05:58,260
Partition three is DP.

102
00:05:58,630 --> 00:05:59,290
Yes.

103
00:05:59,730 --> 00:06:01,390
Then I'm going to type the code.

104
00:06:01,520 --> 00:06:03,110
Eighty five it entered.

105
00:06:03,220 --> 00:06:07,890
Then B, as you can see here, we have changed the type two lennix extinct.

106
00:06:08,470 --> 00:06:08,910
Extend it.

107
00:06:08,970 --> 00:06:10,600
So but I need to change it back.

108
00:06:10,630 --> 00:06:14,390
I'm just going to give you an example how we can use the T and the L.

109
00:06:14,860 --> 00:06:17,260
So the L if you would like to get the code.

110
00:06:18,140 --> 00:06:20,240
And we can see them beside each cord.

111
00:06:20,270 --> 00:06:24,130
You can see what is what is indicates or represent to.

112
00:06:24,560 --> 00:06:26,490
So I'm going to change it to 83 years.

113
00:06:26,580 --> 00:06:35,020
So I'm going to tag T genter for the different three years, then l I'm going to type 83.

114
00:06:35,420 --> 00:06:38,330
It entered in B, as you can see over here.

115
00:06:38,420 --> 00:06:42,680
We have changed the type two to Lennix again.

116
00:06:43,580 --> 00:06:46,760
Now I have created a three partitions.

117
00:06:48,070 --> 00:06:54,640
The next step I need to see if I'm going to m again, if I don't know how I can save an exit, as you

118
00:06:54,640 --> 00:06:58,540
can see here, right table to exit to the desk and exit.

119
00:06:59,400 --> 00:07:02,130
If I would like to quit without saving, change it.

120
00:07:02,180 --> 00:07:04,020
I'm going to take a cue.

121
00:07:04,270 --> 00:07:07,600
But in our case, I'm going to type W, then hit enter.

122
00:07:08,410 --> 00:07:13,000
As you can see over here, the partition tables has been alert.

123
00:07:13,030 --> 00:07:15,070
It means that we have created it.

124
00:07:15,130 --> 00:07:16,780
Three partition.

125
00:07:16,780 --> 00:07:18,910
So I'm going to double check Dallas Block.

126
00:07:19,930 --> 00:07:22,390
As you can see, we have three new partitions.

127
00:07:23,870 --> 00:07:26,620
HDB one, maybe two, maybe three.

128
00:07:26,730 --> 00:07:30,620
And we have decisis here as less block here.

129
00:07:30,880 --> 00:07:31,990
Dash, Dash Everiss.

130
00:07:33,810 --> 00:07:38,240
So as we can see here, we get to make a fire system for these three partitions.

131
00:07:38,900 --> 00:07:40,580
But before we're going to do that.

132
00:07:41,880 --> 00:07:42,720
Is the third step.

133
00:07:42,750 --> 00:07:49,530
I'm going to run the part to probe comment in order to inform the operating system of partition table

134
00:07:49,530 --> 00:07:50,150
changes.

135
00:07:51,000 --> 00:08:00,750
We need to do that in order to tell the system, the operating system, that we have made changes on

136
00:08:00,750 --> 00:08:01,790
their partition table.

137
00:08:01,920 --> 00:08:08,760
So I'm going to type part prop then the device SD be hit, enter.

138
00:08:09,690 --> 00:08:12,480
Now we have run this command.

139
00:08:12,600 --> 00:08:15,210
We are good to go right now for the fourth step.

140
00:08:16,020 --> 00:08:19,260
Now I'm going to run the make fill a makefile system.

141
00:08:20,170 --> 00:08:21,420
I'm going just before that.

142
00:08:21,560 --> 00:08:21,850
Earlier.

143
00:08:22,390 --> 00:08:23,000
Let's look.

144
00:08:23,430 --> 00:08:26,400
As you can see, of all it is look, dash, dash.

145
00:08:26,430 --> 00:08:31,680
If s as you can see here, we don't have a file system for those three partitions.

146
00:08:31,950 --> 00:08:35,820
So I'm going to make a five system for these three partitions.

147
00:08:36,659 --> 00:08:41,059
So I'm going to run the command make file system.

148
00:08:42,480 --> 00:08:49,560
In order to build a Lennix five system for the day for these partitions, and then I'm going to type

149
00:08:49,560 --> 00:08:57,930
T is a type two to tell the system what is the type of the file system that we want to build for this

150
00:08:57,930 --> 00:08:58,560
partition.

151
00:08:59,220 --> 00:09:06,750
Then I'm going to type the party, the five system type that I would like to assign to this partition.

152
00:09:06,750 --> 00:09:10,950
For example, slash diff slash is the be one.

153
00:09:11,580 --> 00:09:19,830
So I'm going to, as you can see, mic five system identity in order to assign this five system type

154
00:09:19,830 --> 00:09:20,460
to this.

155
00:09:21,360 --> 00:09:23,430
Sorry, sir, to this partition.

156
00:09:24,720 --> 00:09:25,860
I'm going to hit enter.

157
00:09:26,940 --> 00:09:36,300
As you can see here, we have created a new fire system with a 500 megabytes to this partition.

158
00:09:36,840 --> 00:09:38,700
Now I'm going to do it for the next one.

159
00:09:39,370 --> 00:09:42,810
Make our system Dashty.

160
00:09:42,960 --> 00:09:51,450
Dan, I'm going to use the fire system type heat the x t for and I'm going to do it for SBB to this

161
00:09:51,450 --> 00:09:52,520
time had enter.

162
00:09:53,580 --> 00:09:54,180
Perfect.

163
00:09:54,960 --> 00:09:56,910
Now I'm going to do it for the last one.

164
00:09:57,690 --> 00:10:00,180
Dashty then the type x f.

165
00:10:00,270 --> 00:10:06,060
S then slash diff slash sd b three hit enter.

166
00:10:06,780 --> 00:10:11,950
Perfect and will create the screen L as Glock dash dash.

167
00:10:12,000 --> 00:10:21,660
If s as we can see over here, we have created a five system tie for these partitions.

168
00:10:23,580 --> 00:10:24,720
So now let's move on.

169
00:10:24,810 --> 00:10:25,830
What is the fifth step.

170
00:10:25,860 --> 00:10:26,310
The festive.

171
00:10:26,450 --> 00:10:30,060
I need to add the new partitions in the file.

172
00:10:31,340 --> 00:10:33,240
It is a five slash ADC.

173
00:10:35,320 --> 00:10:36,410
Slash every step.

174
00:10:38,500 --> 00:10:47,560
So I need to add the new partitions in this five in order to mount them on the board and on the demand.

175
00:10:48,250 --> 00:10:56,680
So this fired slash EDC, slash EVERIST, every step is a fight, is a system configuration file that

176
00:10:56,680 --> 00:10:58,840
contains all variable.

177
00:11:00,420 --> 00:11:03,510
And available disk disk partitions.

178
00:11:04,630 --> 00:11:12,820
And there are options wherever we add a new disc or re partitions and an existing disc.

179
00:11:13,920 --> 00:11:15,840
We need to modify this fight.

180
00:11:16,110 --> 00:11:23,040
If we want to fix the amount that associated with the partition or the device.

181
00:11:24,370 --> 00:11:27,070
Let's imagine that we want to build a house.

182
00:11:28,420 --> 00:11:34,880
So I consider that the device I'm going just going back here to show you what I'm talking about in this

183
00:11:34,890 --> 00:11:35,300
block.

184
00:11:36,520 --> 00:11:38,920
So as I said, let's imagine that we want to build the house.

185
00:11:40,030 --> 00:11:43,870
So I consider the device here that is D.B..

186
00:11:45,170 --> 00:11:45,980
Is the house.

187
00:11:47,120 --> 00:11:52,070
And I consider the partitions, here is DBE one, is DBI two.

188
00:11:52,150 --> 00:11:52,860
And these DVC.

189
00:11:52,900 --> 00:11:56,980
I consider those are the rooms inside the house.

190
00:11:59,120 --> 00:12:06,440
So right now, I have the house and I have two rooms, and I need to create doors for these storms.

191
00:12:07,370 --> 00:12:12,590
So the doors here, first I'm going to kill it directories in order to.

192
00:12:14,250 --> 00:12:18,230
Let us enter this partitions.

193
00:12:18,660 --> 00:12:25,200
So without a mar cheer, as we can see here on this side, we cannot access these partitions.

194
00:12:25,650 --> 00:12:27,650
So we have the house room.

195
00:12:27,990 --> 00:12:33,810
Now, I'm going to make the doors in order to get into inside these partitions.

196
00:12:34,230 --> 00:12:40,920
So that's why we need to add the demand and use partitions inside the slash.

197
00:12:41,460 --> 00:12:41,820
What?

198
00:12:42,350 --> 00:12:44,390
The slash EDC slash.

199
00:12:44,510 --> 00:12:49,950
If I stop by before I'm going dad, I'm going to create three partitions.

200
00:12:50,010 --> 00:12:56,570
So I'm going to add these three partitions and add a slash Margitza, slash M, M and T.

201
00:12:57,120 --> 00:12:58,620
So the first one would be Linux.

202
00:13:00,450 --> 00:13:02,910
Next one will be empty.

203
00:13:03,150 --> 00:13:05,700
Then the next one would be that it is perfect.

204
00:13:06,180 --> 00:13:08,830
Third line slash amanti slash network.

205
00:13:10,500 --> 00:13:14,610
Interred in c d slash n t less.

206
00:13:14,700 --> 00:13:19,050
As we can see here, you're gonna see we have the three detectors.

207
00:13:19,680 --> 00:13:24,030
Now I'm going to at these doors.

208
00:13:24,840 --> 00:13:25,320
Cindy.

209
00:13:25,660 --> 00:13:26,220
Cindy.

210
00:13:29,070 --> 00:13:31,480
So what I'm saying that this block.

211
00:13:31,860 --> 00:13:34,290
So those three directories that I created them.

212
00:13:34,320 --> 00:13:41,310
So I'm going to mom them in order to get access to these partitions.

213
00:13:41,820 --> 00:13:43,230
So I need to go inside.

214
00:13:43,770 --> 00:13:46,850
Five This came for us.

215
00:13:46,960 --> 00:13:50,220
Then slash ATC, slash F-stop.

216
00:13:51,330 --> 00:13:53,250
And I'm going to add a new line here.

217
00:13:53,280 --> 00:13:56,710
So before I'm going to add a new line, let me explain.

218
00:13:58,790 --> 00:14:01,450
What is the attributes over here?

219
00:14:01,520 --> 00:14:08,510
For example, the first one is the Mount Device, for example, the mount device that I would like to

220
00:14:09,090 --> 00:14:12,630
amount to the first partition def slashed SD beat one.

221
00:14:12,800 --> 00:14:14,180
This is the mount device.

222
00:14:14,960 --> 00:14:19,490
Now, the next one, which I'm going to do is the Mount Point.

223
00:14:20,270 --> 00:14:20,780
The door.

224
00:14:22,050 --> 00:14:23,340
So I have the room here.

225
00:14:24,630 --> 00:14:29,080
Now I have to draw like, sorry, the door, the door of natural.

226
00:14:29,190 --> 00:14:32,180
So I'm going to type that Derek Cheese.

227
00:14:32,280 --> 00:14:34,410
So the phrase directory will be Linux.

228
00:14:36,380 --> 00:14:36,920
Perfect.

229
00:14:37,730 --> 00:14:43,730
Now, the third option here, we have the five system types, or as we know that the five system type

230
00:14:43,730 --> 00:14:49,150
for that for the first partition is E, x, t three.

231
00:14:50,120 --> 00:14:52,160
Then we have the option.

232
00:14:52,190 --> 00:14:55,520
This is the fourth field is the Mt. option.

233
00:14:55,520 --> 00:14:58,010
Just usually we leave, it defaults.

234
00:15:00,230 --> 00:15:03,380
Then we have two valleys here.

235
00:15:03,740 --> 00:15:04,430
Two numbers.

236
00:15:05,330 --> 00:15:06,890
We have the back up operation.

237
00:15:08,040 --> 00:15:15,570
It's used for that dumped to utilize if it's one Dendur dump or two and should should do it should back

238
00:15:15,570 --> 00:15:18,030
up a partition if it's zero.

239
00:15:19,260 --> 00:15:23,010
You don't have to back up the partition, so I'm going to just leave it to you.

240
00:15:24,000 --> 00:15:27,100
Now, the second value, as we can see here, is the file system.

241
00:15:27,100 --> 00:15:28,390
Check order.

242
00:15:29,590 --> 00:15:31,810
So we have the five system check.

243
00:15:32,850 --> 00:15:38,550
That defies or partition for erodes and to put time where we can to rebuild the system, if there is

244
00:15:38,640 --> 00:15:44,430
any problem with the device or anything inside, this fight is going to notify us.

245
00:15:44,790 --> 00:15:46,110
So there is three bodies.

246
00:15:46,530 --> 00:15:49,320
If I'm going to type zero, it means that don't check.

247
00:15:49,870 --> 00:15:53,190
Out if there is in order, don't check if if it's Swon.

248
00:15:54,820 --> 00:16:00,550
Check the partition first, if it's to then shake the partition next.

249
00:16:01,450 --> 00:16:02,840
So I'm going to leave it Zeo.

250
00:16:04,220 --> 00:16:06,180
So this is for the first part to shore up.

251
00:16:06,260 --> 00:16:09,920
Now we have created a demand for that first partition.

252
00:16:10,730 --> 00:16:14,780
Now the second partition, I'm going to use the label.

253
00:16:15,800 --> 00:16:16,670
This is another way.

254
00:16:17,360 --> 00:16:19,670
By the way, either we can use the.

255
00:16:20,730 --> 00:16:25,020
The device or we can use the label or the third.

256
00:16:25,180 --> 00:16:27,760
I'm going to use this as for the third partition.

257
00:16:27,910 --> 00:16:28,990
I'm going to use the U.

258
00:16:28,990 --> 00:16:29,320
U.

259
00:16:29,430 --> 00:16:31,350
I should be uppercase u.

260
00:16:31,360 --> 00:16:31,890
U i.

261
00:16:32,310 --> 00:16:32,760
I do.

262
00:16:34,060 --> 00:16:35,470
So we have three.

263
00:16:36,740 --> 00:16:40,120
Types that we can use for the device or demand device.

264
00:16:40,910 --> 00:16:47,540
Either we use the device namea or we can use the label or you you idee.

265
00:16:48,740 --> 00:16:52,350
I still need to create a new idea and I need to copy the story.

266
00:16:52,550 --> 00:16:54,470
I still need to create the label.

267
00:16:54,890 --> 00:16:58,240
And I'm going to copy the new ideas for the third.

268
00:16:58,400 --> 00:17:01,870
So I'm going just to save and I'm going to come.

269
00:17:02,030 --> 00:17:03,770
I'm going to save this file first.

270
00:17:04,550 --> 00:17:10,869
And I'm going to come back here in order to finish and fill the rest of the options.

271
00:17:11,290 --> 00:17:11,930
Hit enter.

272
00:17:13,640 --> 00:17:19,880
Now, if I would like to create a label, I can run this command E to label.

273
00:17:21,020 --> 00:17:25,460
Then I'm going to tie the partition name as D.

274
00:17:26,319 --> 00:17:27,130
B two.

275
00:17:27,980 --> 00:17:30,740
I said that I'm going to use the label for the SDD, too.

276
00:17:31,860 --> 00:17:32,990
Then space.

277
00:17:33,080 --> 00:17:36,440
I'm going to call this Stan Stander.

278
00:17:39,660 --> 00:17:42,860
Standard number one quote is a standard.

279
00:17:45,520 --> 00:17:46,780
So I'm going to call this.

280
00:17:48,030 --> 00:17:48,830
Partitioned.

281
00:17:48,970 --> 00:17:53,820
Or I'm going to give a label to this partition standard hit enter.

282
00:17:55,080 --> 00:17:55,590
Perfect.

283
00:17:56,160 --> 00:18:01,980
Now for the third partition, what I'm going to do, I would like to get the new ideas, so I'm going

284
00:18:01,980 --> 00:18:03,030
to type the command.

285
00:18:03,190 --> 00:18:08,040
Look, Idee, as you can see here, this is the third partition.

286
00:18:08,100 --> 00:18:10,980
And this is the you you I.D. for that third partition.

287
00:18:10,980 --> 00:18:16,590
So I'm going just to cobie the numbers here between the quotation marks.

288
00:18:16,920 --> 00:18:21,060
I'm going to copy this if I would like to generate.

289
00:18:22,630 --> 00:18:25,110
I.e., A, you your idea for this device.

290
00:18:25,150 --> 00:18:27,880
I can do it like this with you, you I.

291
00:18:28,240 --> 00:18:35,110
D Dan Gynt, which is generate didn't the name of the device as D B three.

292
00:18:36,220 --> 00:18:44,200
Hit enter, as you can see here, we have generated a new you I.D., so I'm going to use this one.

293
00:18:44,340 --> 00:18:49,860
I cannot use the old one anymore because I have generated a new Ubaidi now.

294
00:18:49,860 --> 00:18:51,480
So we have the label, each standard.

295
00:18:51,800 --> 00:18:53,010
And we have what?

296
00:18:54,540 --> 00:18:58,860
We have this is the new I.D. just to double check a..

297
00:18:59,640 --> 00:19:03,470
As you can see here, we already have used this door, the Lennix.

298
00:19:03,810 --> 00:19:05,880
Now we have to use the database.

299
00:19:07,150 --> 00:19:09,700
And we need also to use the network over here.

300
00:19:10,850 --> 00:19:13,880
So we're going to use the database and we're going to use the network.

301
00:19:14,510 --> 00:19:23,120
So I'm going back again here inside slash, ATC slash, if I step it into the level here, I'm going

302
00:19:23,120 --> 00:19:28,370
to type set dirt standard.

303
00:19:28,580 --> 00:19:32,450
OK, I'm going to give the mount heave.

304
00:19:33,980 --> 00:19:35,680
So here is the mount device.

305
00:19:35,720 --> 00:19:37,700
Then we have to see the Mount Point.

306
00:19:38,180 --> 00:19:41,120
So I'm going to give it to the database.

307
00:19:41,750 --> 00:19:53,030
And as we know, that deck that the five of five system time for this database, it's x, t, x, e,

308
00:19:53,030 --> 00:19:54,150
x, t four.

309
00:19:55,070 --> 00:19:58,350
Then we're going to type default, the default.

310
00:19:58,490 --> 00:20:02,190
Then here I'm going to leave it zero zero to enter.

311
00:20:02,780 --> 00:20:03,920
I'm not going to just go here.

312
00:20:04,310 --> 00:20:05,630
So I'm going to paste.

313
00:20:07,080 --> 00:20:07,580
Oh, OK.

314
00:20:08,020 --> 00:20:09,490
I'm going to do it here.

315
00:20:10,250 --> 00:20:14,240
I don't know if a just just double check here one second.

316
00:20:19,030 --> 00:20:20,920
I'm going to pass to you idee here.

317
00:20:20,950 --> 00:20:21,580
Perfect.

318
00:20:22,630 --> 00:20:29,120
Then I'm going to type them out point and A. then.

319
00:20:29,830 --> 00:20:33,790
So the last door or the last directory here is the network.

320
00:20:36,030 --> 00:20:39,310
Then the fire, the fire system.

321
00:20:39,350 --> 00:20:45,800
Time for this partition is X if s, then we going to the default.

322
00:20:48,890 --> 00:20:53,490
Then I'm going to type zero zero and I hit I'm going to say 55.

323
00:20:53,650 --> 00:20:53,880
Here.

324
00:20:56,410 --> 00:20:57,880
Yes, to double check.

325
00:20:58,360 --> 00:21:01,000
So I'm going to type the command to dash.

326
00:21:01,100 --> 00:21:02,320
And then three.

327
00:21:03,450 --> 00:21:08,010
Dan, here is the first step.

328
00:21:09,190 --> 00:21:10,620
Enter, as we can see here.

329
00:21:11,190 --> 00:21:11,910
This is the mine.

330
00:21:12,010 --> 00:21:18,000
But Mollet pointed out we had added game inside if top five.

331
00:21:18,120 --> 00:21:19,350
So the configuration file.

332
00:21:22,350 --> 00:21:23,930
Also, I'm going to use the command L.

333
00:21:24,010 --> 00:21:24,850
S block.

334
00:21:26,360 --> 00:21:27,000
Let's look.

335
00:21:27,110 --> 00:21:27,910
Dash, dash, F.

336
00:21:27,950 --> 00:21:28,400
S.

337
00:21:29,560 --> 00:21:36,010
As we can see over here, we have a defined system times and we have the partitions.

338
00:21:36,970 --> 00:21:43,060
However, even though that we created the Mount Point, we still have one last tip.

339
00:21:43,150 --> 00:21:43,870
We need to do.

340
00:21:44,650 --> 00:21:53,500
We need to modify system that was founded on the disk to the big structure for the Lennix five system

341
00:21:53,610 --> 00:21:55,060
garrotted under a statute.

342
00:21:55,690 --> 00:21:55,910
Okay.

343
00:21:55,950 --> 00:21:59,440
I'm going to do a Mount Dash A.

344
00:22:00,470 --> 00:22:01,300
This is for all.

345
00:22:01,700 --> 00:22:06,440
If there is in know, it will show us if we have anyone inside the slash DC slash of estab, I'm going

346
00:22:06,440 --> 00:22:07,100
to enter.

347
00:22:07,850 --> 00:22:11,730
So we cannot find a you I.D. So I'm going to troubleshoot this one first.

348
00:22:12,440 --> 00:22:17,690
So we're going to do the block I.D., as you can see over here.

349
00:22:17,750 --> 00:22:19,910
So I'm going to copy this one here.

350
00:22:22,900 --> 00:22:25,360
Again, and I'm going to go inside.

351
00:22:25,460 --> 00:22:31,120
If estab just double check here, I'm going to change this one here.

352
00:22:37,670 --> 00:22:39,740
We want to change this one here.

353
00:22:40,690 --> 00:22:46,360
Then I'm going to burst and you want to save the file again.

354
00:22:46,600 --> 00:22:49,900
Go back, then I'm going to type Mount Dash, air it, enter.

355
00:22:49,990 --> 00:22:50,310
Yep.

356
00:22:50,350 --> 00:22:50,950
Perfect.

357
00:22:51,310 --> 00:22:52,270
They don't have in error.

358
00:22:52,750 --> 00:22:55,850
Now, I'm going to type in this look dash dash F.

359
00:22:55,870 --> 00:22:56,240
S.

360
00:22:56,770 --> 00:23:00,720
As we can see over here, we have the mounts.

361
00:23:01,330 --> 00:23:02,530
So here is the mount point.

362
00:23:02,980 --> 00:23:05,350
I mean, look what they explained to you guys before.

363
00:23:05,670 --> 00:23:06,610
This is the doors.

364
00:23:06,970 --> 00:23:07,690
This is the doors.

365
00:23:07,690 --> 00:23:08,110
For what?

366
00:23:08,230 --> 00:23:09,130
For the rooms.

367
00:23:10,040 --> 00:23:13,330
And this is the Hoppes, if I would like to.

368
00:23:15,510 --> 00:23:18,060
Unmount any of those?

369
00:23:19,260 --> 00:23:20,410
Let me go inside.

370
00:23:20,430 --> 00:23:26,580
For example, he had a slash ADC slashed stop, for example.

371
00:23:26,640 --> 00:23:31,560
This is the last partitioning, if I would like to unmount this one.

372
00:23:32,070 --> 00:23:36,570
So I'm going just to add the hash here.

373
00:23:36,580 --> 00:23:38,820
Then I have to save the file again here.

374
00:23:39,390 --> 00:23:43,770
And I go back here in what they have to do.

375
00:23:43,800 --> 00:23:45,570
I said unmount.

376
00:23:46,530 --> 00:23:51,340
So this command is going to unmount the device five system.

377
00:23:51,450 --> 00:23:59,220
So the comment is you mount then def s d b three and I hit enter.

378
00:24:00,280 --> 00:24:02,280
Then if I would like to check again.

379
00:24:02,310 --> 00:24:03,450
Ellis' look dash dash.

380
00:24:03,480 --> 00:24:09,860
If s as we can see here, we don't have Mt. Hood or a door for that Chaum anymore.

381
00:24:11,530 --> 00:24:17,320
And if I would like to add agentic back is simple, I just can go back to the fight slash DC slash like

382
00:24:17,320 --> 00:24:24,130
a stop go interview and I'm going to delete the hash over here and I'm going to save the file again

383
00:24:24,130 --> 00:24:24,460
here.

384
00:24:25,060 --> 00:24:27,580
And I'm going to do the mound dash all for all.

385
00:24:28,450 --> 00:24:31,210
And then Ellis Block Dash Dash F.

386
00:24:31,270 --> 00:24:35,420
S As you can see here, we got the Mount Point again.

387
00:24:36,690 --> 00:24:40,240
I hope that's, uh, clear.

388
00:24:40,480 --> 00:24:48,280
And and if I hope that I explain all the concepts about how we can create a standard partitions using

389
00:24:48,280 --> 00:24:56,950
the F disk, then after that to use the bar to probe, then how we can add dismount to to what?

390
00:24:57,990 --> 00:24:59,460
To the slash if we stop.

391
00:24:59,900 --> 00:25:03,620
Just last thing big before I'm going to add decision, just to make it clear.

392
00:25:03,730 --> 00:25:05,710
You guys just think about that.

393
00:25:05,920 --> 00:25:10,750
This is a device I consider just what is like a house and this one is like a room.

394
00:25:11,380 --> 00:25:19,930
And in order to get into this entire this room, we need a door, a directory in order to access this

395
00:25:20,470 --> 00:25:21,010
partition.

396
00:25:22,190 --> 00:25:23,420
That's conclude our session.

397
00:25:23,570 --> 00:25:23,990
Thank you.

398
00:25:24,060 --> 00:25:25,350
I'll see you in the next lesson.