1 00:00:00,660 --> 00:00:05,370 Hello, everyone, and this demo, I'm going to show you how to create a square partition. 2 00:00:07,080 --> 00:00:13,540 The main objective of a swab space is to be a second memory after the RAM memory is fully utter lies. 3 00:00:14,040 --> 00:00:15,690 And the system needs more space. 4 00:00:17,040 --> 00:00:23,400 When we insert a Linux operating system, the operating system is going to create a swab space. 5 00:00:24,180 --> 00:00:28,170 And this is swab space is going to be used as a fresh water memory. 6 00:00:29,530 --> 00:00:35,860 If I would like to list the swaps in my system, I can under comment cat selection, rock slash swaps. 7 00:00:36,930 --> 00:00:40,270 As you can see here, we have one partition so far for the swap. 8 00:00:40,980 --> 00:00:44,260 Also, there is another comment, free dash each. 9 00:00:45,290 --> 00:00:47,530 And so here we have the swab and the size. 10 00:00:47,750 --> 00:00:51,840 It's one Gega, and there is also from going to the comet. 11 00:00:52,130 --> 00:00:54,020 This bloke can see you. 12 00:00:54,050 --> 00:00:56,240 The swab comes under. 13 00:00:56,250 --> 00:00:57,730 The device is DNA. 14 00:00:57,950 --> 00:01:03,090 And also, there is a market point inside the slash ADC slash F-stop. 15 00:01:04,459 --> 00:01:07,880 Now, I would like to create a swap partition. 16 00:01:08,480 --> 00:01:09,680 I'm going to use this device. 17 00:01:09,710 --> 00:01:13,310 I still have space is already. 18 00:01:13,340 --> 00:01:19,250 I already have used one point, Gega five, so I can use one Gigha for the swap. 19 00:01:19,250 --> 00:01:21,140 So I'm going to create a new partition. 20 00:01:22,070 --> 00:01:32,750 So it's going to be s dbe for someone to use if disk slash def slash is DBI, it enter and create. 21 00:01:33,080 --> 00:01:34,560 So I'm going to use primary. 22 00:01:34,790 --> 00:01:36,050 Yup, very. 23 00:01:36,050 --> 00:01:39,870 Sector is going to start after the last sector and partition three. 24 00:01:40,660 --> 00:01:45,200 There's just one is going to be partition for tenter. 25 00:01:45,650 --> 00:01:49,250 Now last sector as I said that I'm going to. 26 00:01:51,560 --> 00:01:56,050 Assign one giga pi to this partition to enter. 27 00:01:56,770 --> 00:01:57,460 Yes. 28 00:01:58,580 --> 00:02:05,500 P, as we can see over here, we have created what, a new partition and the time is Linux. 29 00:02:05,530 --> 00:02:10,340 I can't change the types I can type L if I would like to change this. 30 00:02:10,360 --> 00:02:12,700 For example, Linux swap eighty two. 31 00:02:12,760 --> 00:02:15,110 So I can take T then. 32 00:02:15,400 --> 00:02:17,310 Eighty two noro. 33 00:02:17,920 --> 00:02:18,940 This is the default forward. 34 00:02:18,970 --> 00:02:19,880 This is for by the ship. 35 00:02:19,930 --> 00:02:20,470 Yes. 36 00:02:20,920 --> 00:02:22,420 And the code will be eighty two. 37 00:02:22,570 --> 00:02:24,400 It enter P. 38 00:02:25,030 --> 00:02:31,420 As we can see here we have changed that type tool in a swap after I have created this partition. 39 00:02:31,450 --> 00:02:32,200 I need to. 40 00:02:32,880 --> 00:02:35,170 So I'm going to write an exit. 41 00:02:37,600 --> 00:02:38,460 Now, what is an X? 42 00:02:38,590 --> 00:02:47,080 I need to use the part to prop in order to inform the operating system of the partition table changes. 43 00:02:47,140 --> 00:02:53,700 So part brog slash dev slash SDD hit enter. 44 00:02:54,340 --> 00:02:54,880 Perfect. 45 00:02:55,890 --> 00:02:57,960 Now, the next step, I'm going to run. 46 00:02:58,920 --> 00:03:02,880 Make swap as we maybe as a as. 47 00:03:02,910 --> 00:03:04,710 As we have explained in the. 48 00:03:06,590 --> 00:03:14,690 Previous session, if I would like to format or assign a fire system, I'm going to use the make five 49 00:03:14,690 --> 00:03:15,230 system. 50 00:03:15,590 --> 00:03:18,430 But for the swab, I'm going to use make swap. 51 00:03:20,000 --> 00:03:25,910 Then after that, if I would like to give a label for this one, I can give a label but is going to 52 00:03:25,910 --> 00:03:28,110 be uppercase L.. 53 00:03:28,880 --> 00:03:30,830 And I'm going to call this one swap. 54 00:03:31,950 --> 00:03:36,480 Dan, I'm going to assign the device HDB for. 55 00:03:37,530 --> 00:03:38,880 Then I'm going to hit enter. 56 00:03:41,400 --> 00:03:41,850 Perfect. 57 00:03:41,880 --> 00:03:45,170 We have created a news web partition. 58 00:03:46,070 --> 00:03:50,870 And now I need to before I was just let me check this list. 59 00:03:50,940 --> 00:03:52,090 Look, Dash, Dash. 60 00:03:52,690 --> 00:04:01,470 This was we can see here the five system for the partition four is DBE for a swap and it has a label 61 00:04:01,860 --> 00:04:02,550 swap. 62 00:04:03,930 --> 00:04:05,420 And also, it has a few ideas. 63 00:04:05,930 --> 00:04:13,440 But this said, we need to assign a Mount Point insider slash ADC, slash Evista. 64 00:04:14,090 --> 00:04:18,470 So ATC slash if this tap tenter. 65 00:04:19,649 --> 00:04:22,350 I'm going to create a new. 66 00:04:24,060 --> 00:04:29,700 Liar, right now I'm gonna I'm gonna use the label and swab. 67 00:04:30,200 --> 00:04:35,740 I'm not gonna use the slash def slash is before then hid. 68 00:04:36,420 --> 00:04:38,210 Out point. 69 00:04:39,150 --> 00:04:41,340 So the my point here, what I'm going to use. 70 00:04:41,370 --> 00:04:44,010 I'm going to type swap. 71 00:04:44,830 --> 00:04:49,640 Because we're not going to create any dedicated just for the swab, we get a right swap. 72 00:04:50,260 --> 00:04:52,320 This is for Doumar Mount Point. 73 00:04:53,410 --> 00:04:56,930 Then after that, what is the five system type swap? 74 00:04:58,240 --> 00:05:02,250 Then the next one is the option and will be default. 75 00:05:05,960 --> 00:05:06,330 Perfect. 76 00:05:06,370 --> 00:05:16,430 Then after that, zero zero and I hit Skip, Save the File yesterday will shake tail minus. 77 00:05:17,190 --> 00:05:22,570 And the last line for ATC if it's tap hit, enter. 78 00:05:23,430 --> 00:05:31,680 This is the line that we have added it inside this establish configuration file in order to mount that 79 00:05:31,930 --> 00:05:32,840 swipe partition. 80 00:05:33,490 --> 00:05:36,220 So now, after we added that we need to a mounted. 81 00:05:37,760 --> 00:05:42,780 Dash it all to enter the clear. 82 00:05:43,310 --> 00:05:46,310 Ellis, block that dash if s hit, enter. 83 00:05:47,800 --> 00:05:51,040 Now, what we need to do after we added. 84 00:05:52,490 --> 00:05:59,130 The Mount Point inside the slash 80 slash ATC slash every step, there is a step that we need to do. 85 00:05:59,670 --> 00:06:02,730 We need to make this swap on. 86 00:06:03,300 --> 00:06:08,750 So what I'm going to do, I'm going to run the command swap on. 87 00:06:10,380 --> 00:06:16,110 Then I'm going to use the dash feet in order to show more information and details about what you're 88 00:06:16,110 --> 00:06:16,450 gonna do. 89 00:06:16,500 --> 00:06:19,620 Then selective slash is D.B.. 90 00:06:20,700 --> 00:06:22,310 For her to enter. 91 00:06:24,160 --> 00:06:34,420 Perfect live and swab on Dasht as it enter, as we can see here, we have a new swab partition. 92 00:06:34,540 --> 00:06:34,950 Perfect. 93 00:06:35,180 --> 00:06:37,700 Now let's look at this. 94 00:06:38,500 --> 00:06:42,250 As you can see over here right now, we have the amount point. 95 00:06:42,730 --> 00:06:46,910 So we don't need to forget to use a swab on after. 96 00:06:47,020 --> 00:06:56,270 After the amount and after we add and convert an end configuration file to slash ADC slash if it stops. 97 00:06:56,320 --> 00:06:57,790 So we need to run this command. 98 00:06:58,280 --> 00:06:58,920 The swap one. 99 00:07:00,980 --> 00:07:03,380 If I would like to, for example. 100 00:07:05,100 --> 00:07:07,880 To disable the swap, there is another comment. 101 00:07:08,010 --> 00:07:09,300 It's called Swap Off. 102 00:07:11,080 --> 00:07:13,300 But before that, let me show you this command. 103 00:07:13,390 --> 00:07:17,560 He slash broke just to double check the swabs here. 104 00:07:18,790 --> 00:07:19,360 Perfect. 105 00:07:19,930 --> 00:07:24,940 So we have this swab here then free dash, which if I remember. 106 00:07:27,480 --> 00:07:34,200 The size that we used to have, we used to have one, Gega, right now we have to because we have created 107 00:07:34,230 --> 00:07:35,790 a new swamp, so we need to swap. 108 00:07:36,610 --> 00:07:37,710 There is also this option. 109 00:07:37,750 --> 00:07:40,860 This is the S, which is the summary right now. 110 00:07:40,870 --> 00:07:46,260 I would like to use this swap off and I have to use the. 111 00:07:47,490 --> 00:07:48,690 Dash fee in order to. 112 00:07:49,860 --> 00:07:58,620 Less more information about what I'm going to do with indef sd be for it inter sea swap off right now. 113 00:07:59,640 --> 00:08:05,910 Yes, remember that we still have to then I'm going to run free, which right now we have one. 114 00:08:06,660 --> 00:08:10,450 If I would like to run the swap on Dash. 115 00:08:10,620 --> 00:08:10,880 Yes. 116 00:08:10,890 --> 00:08:11,580 Hit enter. 117 00:08:11,700 --> 00:08:13,530 We only have one swap. 118 00:08:14,230 --> 00:08:21,340 If I'll get Janet back swap on AJP then the name of the swap partition is the beat for it. 119 00:08:21,410 --> 00:08:21,890 Enter. 120 00:08:22,320 --> 00:08:22,950 Perfect. 121 00:08:24,430 --> 00:08:33,530 Three dash edge cat slash book swaps it. 122 00:08:33,630 --> 00:08:34,710 Enter as I can see it. 123 00:08:34,740 --> 00:08:35,720 We have two swaps. 124 00:08:36,270 --> 00:08:40,380 Now we added also that swap to this to the previous one. 125 00:08:40,500 --> 00:08:46,120 And now we have the size of the total is to swap on dash. 126 00:08:46,380 --> 00:08:53,940 As you can see here, we already added this swap to the pool. 127 00:08:54,980 --> 00:09:02,430 We're going to run the comment in this block, that special, as you can see over here. 128 00:09:02,460 --> 00:09:03,150 Everything is fine. 129 00:09:03,180 --> 00:09:07,230 So we have two swaps and the total size of this swap. 130 00:09:07,380 --> 00:09:09,030 It's two ganger. 131 00:09:10,410 --> 00:09:11,550 That's conclude with our session. 132 00:09:11,730 --> 00:09:12,120 Thank you. 133 00:09:12,160 --> 00:09:13,320 And see you on next US.