1 00:00:00,500 --> 00:00:07,280 Hello, everyone, and Distomo, I'm going to show you how to run container images by using the Broadman 2 00:00:07,280 --> 00:00:09,020 command the first step. 3 00:00:09,020 --> 00:00:11,900 I'm going to check if I do have put my command on my system. 4 00:00:11,900 --> 00:00:18,740 So I'm going to type both mind and type that that completion in order to see the commands that we contacted 5 00:00:18,740 --> 00:00:20,520 him after the Woodman comment. 6 00:00:20,690 --> 00:00:27,490 Also, we can go to the Manbij of the apartment, as we can see here. 7 00:00:27,500 --> 00:00:33,770 So the board, it's a simple management tool for both containers and images. 8 00:00:34,160 --> 00:00:41,000 Let's go back in case if you don't have put much on your system, then you need to install the content 9 00:00:41,000 --> 00:00:41,930 of tools packages. 10 00:00:41,930 --> 00:00:43,030 So what are you going to do? 11 00:00:43,040 --> 00:00:51,650 So some I'm not looking on as as as a road user, but this account, it's it's an administrator account. 12 00:00:51,920 --> 00:01:04,670 So I'm going to type sudo young module and install dash qwhy container, then dash tools to enter. 13 00:01:05,450 --> 00:01:08,870 As we can see here, I already installed the container tools. 14 00:01:08,870 --> 00:01:12,320 So if we don't have it, just run this comment next. 15 00:01:12,320 --> 00:01:20,690 I want like to go and check the uh configuration file under districted the slash DC slash container 16 00:01:20,910 --> 00:01:23,120 slash registers that. 17 00:01:23,270 --> 00:01:25,160 Com Pittenger. 18 00:01:25,760 --> 00:01:31,850 So under this directory we can see the different list of registers, especially here. 19 00:01:31,850 --> 00:01:34,300 As we can see this registers that search. 20 00:01:34,790 --> 00:01:41,120 So the registers that we do have on the system or the default register, that woman can search for container 21 00:01:41,120 --> 00:01:41,720 images. 22 00:01:42,020 --> 00:01:45,110 We have the register that accesses that red dot com. 23 00:01:45,410 --> 00:01:47,060 We have a second register here. 24 00:01:47,060 --> 00:01:48,680 Register that red had that. 25 00:01:49,400 --> 00:01:53,240 And we have the third one that Dukkha that I own. 26 00:01:54,860 --> 00:01:58,470 Next here is the registers that insecure. 27 00:01:58,820 --> 00:02:06,560 So here is under this section, we can type the registers that don't use the as when pulling images 28 00:02:06,560 --> 00:02:09,949 or use self sint. 29 00:02:10,280 --> 00:02:17,210 Basically, we can see that as we can see over here between the two brackets, that the insecurely gestures, 30 00:02:17,900 --> 00:02:22,780 uh, just do not have any registers or entries. 31 00:02:23,330 --> 00:02:26,320 And the last thing here is there's just there's that block. 32 00:02:26,570 --> 00:02:32,660 So if you would like to block or deny specific registers in the system and by default, as we can see 33 00:02:32,660 --> 00:02:37,640 also here between the brackets, there are no registers and entries. 34 00:02:38,440 --> 00:02:39,470 OK, let's go back. 35 00:02:41,480 --> 00:02:47,090 Now, if I would like to show the current adjusters that are running or using in the system. 36 00:02:47,090 --> 00:02:49,400 So I'm going to try to put my info. 37 00:02:50,390 --> 00:02:57,650 As we can see over here, here are two registers that that that we can use in order to pull images or 38 00:02:57,650 --> 00:02:58,700 contain images. 39 00:03:00,620 --> 00:03:06,830 That is an X, if I would like to search a register for an image or container image so I can run the 40 00:03:06,850 --> 00:03:13,730 command post search and for example, just search for content and image. 41 00:03:13,730 --> 00:03:19,190 Fedoruk this is the operating system and it would show me the list of the container images. 42 00:03:20,630 --> 00:03:23,860 There is one thing, as we can see over here. 43 00:03:24,680 --> 00:03:28,070 Here we have the container images from Dukkha. 44 00:03:29,150 --> 00:03:36,500 If you would like to put remote images and official RedHat products from Red how to register. 45 00:03:37,520 --> 00:03:40,490 Let me show the content of this file the RedHat. 46 00:03:41,660 --> 00:03:47,300 So I need to go to this Web site, create a username and password, then I need to run this command 47 00:03:47,300 --> 00:03:55,040 in order that in order to register and the RedHat official Web site. 48 00:03:55,070 --> 00:04:03,050 So in order to remote to put remote images on official RedHat products, uh, I already and I'm going 49 00:04:03,050 --> 00:04:10,130 to run this command so soldiers music and he paste it into I already logged in. 50 00:04:12,230 --> 00:04:19,339 And as you can see over here, it's already logged in to the disk registers just in case, as I said, 51 00:04:19,339 --> 00:04:24,890 that if we don't have a username and password, go to this Web site and username and password, run 52 00:04:24,890 --> 00:04:33,490 this command type username password in order to put your remote images and officially retired products. 53 00:04:34,490 --> 00:04:35,430 So what is an X? 54 00:04:35,530 --> 00:04:43,550 Now, if I would like to continue to search Boothman search, I want to know. 55 00:04:43,550 --> 00:04:48,770 So I'm going to search for unhappen to image hit enter. 56 00:04:52,550 --> 00:04:59,660 As you can see here, here, the list of the appointer images, I also can search for another HTP, 57 00:04:59,660 --> 00:05:07,100 another image, the HTP, and also I can do that for the Ingenix tenter. 58 00:05:07,100 --> 00:05:12,080 It will list all the container images on the registers. 59 00:05:13,520 --> 00:05:20,960 If I if I would like to search for a container image in a specific registered, for example, Bortman 60 00:05:21,080 --> 00:05:30,000 search register that read the Red Hat that I ordered and slash. 61 00:05:30,110 --> 00:05:37,960 I'm going to search for Angie Ingenix image container, ok. 62 00:05:38,830 --> 00:05:44,090 OK, you have to enter. 63 00:05:44,150 --> 00:05:51,530 It will list all the container images in this specific register and we can do the same thing. 64 00:05:51,540 --> 00:05:57,410 Like if you want to do for the car or engine, it will show you all the images on that register. 65 00:05:58,910 --> 00:06:07,790 And there is also my brother, if you would like to search, for example, for, uh, Eskil or Maria 66 00:06:07,790 --> 00:06:12,510 Déby also, it will list all the images for you here. 67 00:06:13,580 --> 00:06:20,720 There is another option, if I would like to, uh, get more details on description of container images 68 00:06:20,720 --> 00:06:29,540 so I can use this option on the trunk, then the name of the container and it will show, uh, more 69 00:06:29,540 --> 00:06:32,450 details and description of the container images. 70 00:06:33,770 --> 00:06:45,170 Uh, there is another option if I would like to limit the search, but man search then dash dash limit. 71 00:06:45,380 --> 00:06:50,960 I will do it, too, if I would like to limit it to two necessarily to search, to enter. 72 00:06:51,530 --> 00:06:53,550 So it will only what is going to do. 73 00:06:53,580 --> 00:06:58,510 So this option is to only show a maximum of two images for each register. 74 00:06:58,520 --> 00:07:00,940 So we have the darker here. 75 00:07:01,220 --> 00:07:07,790 I know that there is support here for this register, but if you guys notice over here, those two are 76 00:07:07,790 --> 00:07:12,170 the same, but maybe a different version and the same thing here. 77 00:07:12,170 --> 00:07:14,060 So I'm totally off to 78 00:07:16,730 --> 00:07:20,190 next if I would like to show all your official images. 79 00:07:20,190 --> 00:07:33,800 So I'm going to run the command post man, search both my search dash, dash filter star stars five. 80 00:07:33,800 --> 00:07:36,950 So I'm going to show you only images with five stars. 81 00:07:36,950 --> 00:07:39,940 So this is like like a filter. 82 00:07:39,950 --> 00:07:46,160 So as we can see, it is a five star, so it'll show only five and above the next. 83 00:07:46,940 --> 00:07:51,200 If I would like to pull a lot before I'm going to pull an image. 84 00:07:51,200 --> 00:07:54,590 So if I would like to follow the images, so far we don't have any image. 85 00:07:54,590 --> 00:07:57,830 So I would like to pull an image. 86 00:08:00,530 --> 00:08:09,800 Uh, so I'm going to pull it TPD enter, we'll take cover maybe a couple seconds, five seconds or ten 87 00:08:09,800 --> 00:08:11,690 seconds in order to pull damisch. 88 00:08:12,230 --> 00:08:15,950 Then I'm going to run the command padman images. 89 00:08:17,060 --> 00:08:19,310 As you can see over here, we don't have any image. 90 00:08:19,580 --> 00:08:22,370 So I'm going to run the command, put my image on. 91 00:08:22,370 --> 00:08:25,760 As we can see over here, we have right now one image. 92 00:08:27,490 --> 00:08:33,860 Uh, if I would like to show information about container's, for example, operating system architecture 93 00:08:34,429 --> 00:08:39,169 for any image so I can run the command post, inspect. 94 00:08:40,419 --> 00:08:42,620 I'm going to inspect this image. 95 00:08:43,280 --> 00:08:48,290 So it's going to show information about the operating system and the architecture of this image. 96 00:08:50,840 --> 00:08:57,650 Next, if I would like to see here Bullmann images, if I would see the tax. 97 00:08:58,520 --> 00:09:01,480 So I would like to tag a container image. 98 00:09:01,530 --> 00:09:05,450 It's basically like an alias to an image so I can do that. 99 00:09:05,450 --> 00:09:10,340 So it will create, uh, like the same image with different tag. 100 00:09:10,340 --> 00:09:14,900 So I'm going to type padman then tag. 101 00:09:16,400 --> 00:09:29,450 I'm going to get the idea or the image ID here the next I'm going to type HTP then call in twenty twenty 102 00:09:30,140 --> 00:09:30,330 eight. 103 00:09:30,380 --> 00:09:38,810 Genta, as we can see over here right now, we have a tag for this image next. 104 00:09:38,810 --> 00:09:48,920 If I would like to run a container, a container image in the background as demon surface or in the 105 00:09:48,920 --> 00:09:51,350 Dutch mode, I can run the command. 106 00:09:52,260 --> 00:09:58,260 Man, padman run Dashty in order. 107 00:09:58,290 --> 00:10:05,190 What does Dashty in order to run a contender in the background as deman service or any detachment then 108 00:10:05,190 --> 00:10:06,220 the name of the army. 109 00:10:06,250 --> 00:10:11,760 So I'm going to do it for Fedora Genta. 110 00:10:17,670 --> 00:10:24,630 There is also another option, if I would like to run a container in an attractive T.Y. mode in order 111 00:10:24,630 --> 00:10:26,430 to get an access to the ship. 112 00:10:27,300 --> 00:10:30,180 So right now here, we only just have it in the background. 113 00:10:30,870 --> 00:10:35,840 But what this command run dash it. 114 00:10:35,890 --> 00:10:41,930 So this is an interactive TV mode in order to get an access to this container. 115 00:10:41,950 --> 00:10:43,440 Amy Genta. 116 00:10:44,490 --> 00:10:47,730 So, Ellis', we are right now inside this image. 117 00:10:47,730 --> 00:10:53,990 So I'm going to run the command, you name Dasha. 118 00:10:54,000 --> 00:10:58,380 So I would like to show the current version now if I would like to exit from this. 119 00:10:58,500 --> 00:11:03,090 As we can see over here, I'm going to run the command your name dayjob. 120 00:11:03,840 --> 00:11:10,920 We have the same Kolan version because in this container, image is installed up off of the operating 121 00:11:10,920 --> 00:11:18,840 system to ensure the same color board operating the same color vision of the main operating system. 122 00:11:20,610 --> 00:11:25,070 So let's run the command board might be changed. 123 00:11:25,200 --> 00:11:27,720 So far as we can see here. 124 00:11:27,780 --> 00:11:31,350 We don't have any current running containers. 125 00:11:33,470 --> 00:11:42,410 There is another option, if I do, it would dash it will show what is going to show, it will show 126 00:11:42,410 --> 00:11:50,360 the current trend in containers and also the containers that have been previously running, as we can 127 00:11:50,360 --> 00:11:51,150 see over here. 128 00:11:51,980 --> 00:11:55,460 We have previously learning these containers. 129 00:11:55,460 --> 00:11:55,940 Are we? 130 00:11:56,480 --> 00:11:57,710 We exited from them. 131 00:11:57,710 --> 00:12:03,740 So that's why when we use the option and also we can use it with the full notation here. 132 00:12:05,720 --> 00:12:16,040 That's all it will show that these containers have been previously running and x what we're going to 133 00:12:16,040 --> 00:12:16,580 do. 134 00:12:17,540 --> 00:12:22,100 OK, so here, if I would like to, the Dutch. 135 00:12:24,030 --> 00:12:27,300 From a container TDY at the same time. 136 00:12:29,080 --> 00:12:34,960 I'm not going to exit from that container, so I'm going to tie the car and in the keyboard also control 137 00:12:35,290 --> 00:12:36,160 and control accuser. 138 00:12:36,180 --> 00:12:38,350 The container would be still running in the background. 139 00:12:38,800 --> 00:12:43,420 So I'm going to run the command post man run dash 80. 140 00:12:43,430 --> 00:12:49,180 So this is the interactive time mode I'm going to do for the fedora image. 141 00:12:49,210 --> 00:12:50,610 And I hit Enter. 142 00:12:52,090 --> 00:12:56,740 Now we are inside this container. 143 00:12:58,000 --> 00:12:59,490 As we can see here. 144 00:12:59,620 --> 00:13:04,720 This is the version and the name of this container is the fedora. 145 00:13:05,200 --> 00:13:09,820 Now, I'm not going to tiebreaks it if I'm going to die because it means that I'm going to exit from 146 00:13:09,820 --> 00:13:12,890 this container and is not going to be still running. 147 00:13:12,910 --> 00:13:18,330 So what I'm going to do so control speed and control. 148 00:13:18,340 --> 00:13:25,830 Q So I'm outside of this container, but if I'm going to tap the command, put my piece. 149 00:13:27,100 --> 00:13:30,390 You can see here the container is still running. 150 00:13:31,670 --> 00:13:40,840 I can't stop the container if I don't want to put my stop get the container imager to enter. 151 00:13:41,980 --> 00:13:49,010 So perhaps we're done talking about the terrible mistake, put money into it. 152 00:13:49,060 --> 00:13:51,750 We don't have any running container. 153 00:13:53,370 --> 00:13:58,230 So if I would like to run commands inside containers. 154 00:14:00,220 --> 00:14:04,240 OK, so I'm going to I really have that command to see here. 155 00:14:06,890 --> 00:14:10,830 Or appear so contorted and controlled. 156 00:14:11,070 --> 00:14:21,090 You know, I'm going to type the comment put man e so I'm going to execute commands inside. 157 00:14:21,580 --> 00:14:26,730 But before that, let me do good tears to get the image. 158 00:14:26,770 --> 00:14:31,840 The running Amish community support man e x easy. 159 00:14:32,200 --> 00:14:42,990 So I get the container I image here, so I'm going to run the command l special agent here. 160 00:14:43,150 --> 00:14:52,660 As we can see over here right now, I run the command l l inside this container by using the port man 161 00:14:53,110 --> 00:14:55,840 you see then the container id. 162 00:14:57,410 --> 00:15:04,100 Then the comment will do the same thing here, if I would like to give to you name Dasha and we can 163 00:15:04,100 --> 00:15:05,990 get the corner version. 164 00:15:07,350 --> 00:15:15,170 I know what I'm going to do an X if I would like to map a whole sport. 165 00:15:16,730 --> 00:15:24,380 So if I'd like to map a hotspot to a container port in order to access from in order to access the way 166 00:15:24,770 --> 00:15:32,390 to access this container from outside, for example, I want to map a map of six zero six zero two container 167 00:15:32,390 --> 00:15:33,880 Port six zero. 168 00:15:34,460 --> 00:15:37,610 So I'm going to tie it up, put man run. 169 00:15:38,000 --> 00:15:44,660 So Dashti, so this is like the main surface or in the dashboard then dash p. 170 00:15:45,500 --> 00:15:52,160 So as I said, this is I would like I would like to map the whole sport to this one six zero six zero 171 00:15:52,670 --> 00:16:02,420 to a container port, then call sixty 60, then the name of damage to HTP hit enter then if I would 172 00:16:02,420 --> 00:16:05,570 like to show the current container port mapping. 173 00:16:05,570 --> 00:16:13,170 So I am going to type the command port Portman Port Dash a hit enter as we can see over here. 174 00:16:13,880 --> 00:16:20,210 So what we did, we mapped the host for the six zero six zero to a container port 60. 175 00:16:21,710 --> 00:16:22,250 Perfect. 176 00:16:23,090 --> 00:16:25,520 But we need to do one more step. 177 00:16:25,520 --> 00:16:26,570 After we do that. 178 00:16:26,570 --> 00:16:32,260 We need also to open this port in the firewall just in case we don't want to face any problems. 179 00:16:32,260 --> 00:16:33,380 So firewall. 180 00:16:35,820 --> 00:16:50,490 Firewalled dachsie indeed, and dash dash at Port six zero six zero slashed DCP and Dash Dash permanent 181 00:16:51,990 --> 00:16:54,960 hit enter the buzzword. 182 00:16:56,370 --> 00:16:58,560 So let me run that command just in case that is. 183 00:16:58,740 --> 00:17:02,700 How did you get that so far that that one. 184 00:17:03,000 --> 00:17:03,920 We got it from here. 185 00:17:03,930 --> 00:17:12,750 The slash is Tsipi and then after that we do so do fire wall. 186 00:17:13,380 --> 00:17:16,440 That seemed to actually do the reload. 187 00:17:21,859 --> 00:17:32,630 Then we do so do list, that's all you're saying, is that we see that we have the support six zero 188 00:17:32,630 --> 00:17:33,210 six zero. 189 00:17:34,100 --> 00:17:37,780 This is the part that we allow in the fall, in the fall. 190 00:17:40,250 --> 00:17:41,420 So there are some. 191 00:17:41,540 --> 00:17:43,660 OK, let's move to the next concept right now. 192 00:17:43,670 --> 00:17:49,400 Here are some containers that we need to run environmental variables with them. 193 00:17:50,690 --> 00:17:59,150 OK, well, let me let me first FirstRand Maria Debe the container without environmental variables so 194 00:17:59,150 --> 00:18:09,230 I'm going to run the command put man there I'm going to write in Dutch mode Maria DB and I hit enter. 195 00:18:21,470 --> 00:18:31,130 It's going to if I'm going to try to put my stash a first, I'm going to try it without they just I 196 00:18:31,130 --> 00:18:37,730 would like to see if it's this container image it will run or what is going to create an issue. 197 00:18:40,350 --> 00:18:46,650 I don't know if it's going to run, but as I said, that we're going to run it without maybe or see 198 00:18:46,890 --> 00:18:52,150 man piece as we see over here, we don't have the ready. 199 00:18:52,170 --> 00:18:53,440 But lets me check. 200 00:18:53,500 --> 00:18:55,030 He appears she. 201 00:18:57,710 --> 00:19:05,900 OK, that we don't have it, so why we don't have that image, so if I would like to check so I can 202 00:19:05,900 --> 00:19:16,430 do that with the logs and Maria Debe, it will show me the logs that why this container was my image. 203 00:19:18,560 --> 00:19:28,140 So the image is here and we can get the idea here, for example, that map logs to show why did Iran 204 00:19:28,190 --> 00:19:34,670 let me get a majority just to check it didn't work. 205 00:19:34,670 --> 00:19:35,990 Why did it work? 206 00:19:36,800 --> 00:19:39,890 So why it failed to run its run? 207 00:19:39,890 --> 00:19:45,400 Because that we need to use environment variables with this image. 208 00:19:45,410 --> 00:19:47,120 So I tried different ways. 209 00:19:47,120 --> 00:19:51,530 So I tried with the logs in order to see if I can pull more information. 210 00:19:51,950 --> 00:19:56,490 But apparently this container is not running or is not working. 211 00:19:56,510 --> 00:20:00,920 So what we are going to do so potami I'm going to use the board man. 212 00:20:01,310 --> 00:20:04,570 I'm going to stop, I'm going to remove it. 213 00:20:04,580 --> 00:20:12,020 So if we'd like to remove this image R.M. then you get this ID here, copy. 214 00:20:13,250 --> 00:20:18,190 Sometimes it doesn't allow you to do it, but if that's do it without it will say that. 215 00:20:18,200 --> 00:20:20,260 Could you remove it because it's still that is it. 216 00:20:20,700 --> 00:20:22,490 It is being used for that. 217 00:20:22,520 --> 00:20:31,460 So what I'm going to use the option dash for it will force it and delete it so we don't have the morality 218 00:20:31,460 --> 00:20:31,760 here. 219 00:20:31,770 --> 00:20:35,510 So I do have a text file here, my text. 220 00:20:35,960 --> 00:20:41,650 So as I mentioned, there's some container images that we need to run environmental variables with them. 221 00:20:42,650 --> 00:20:45,820 So as you can see here, I know it's a long command, but we do. 222 00:20:45,820 --> 00:20:46,530 We have to do it. 223 00:20:46,560 --> 00:20:53,990 We would like to run an environment variables with a database, with Maria DB or even with my skills. 224 00:20:53,990 --> 00:20:56,720 So put mine run Dashty. 225 00:20:56,720 --> 00:20:57,680 We already know that. 226 00:20:58,070 --> 00:21:01,940 And the name if would like to give a name to this image. 227 00:21:01,940 --> 00:21:04,970 So I give it to our CSA and the board. 228 00:21:04,970 --> 00:21:13,790 I give the port two thousand, two thousand and here the E so the E like is a shortcut for the environment 229 00:21:13,790 --> 00:21:14,330 variables. 230 00:21:14,780 --> 00:21:17,840 As we can see here, we have those environments. 231 00:21:18,860 --> 00:21:26,030 So here the my scale underscore Ruut underscore buzzword, the buzzword and we have another environment 232 00:21:26,030 --> 00:21:32,300 variable also we have here and then we type what, the name of the container. 233 00:21:33,910 --> 00:21:40,390 This is the DBI now, I'm going to run it, so I hit enter. 234 00:21:41,840 --> 00:21:44,660 Is going to try to pull the image. 235 00:22:01,060 --> 00:22:03,900 Sometimes you take a couple of seconds, just wait for it. 236 00:22:07,820 --> 00:22:12,560 I speak English because they have a lot of variables here, environment farmers are using with this 237 00:22:13,310 --> 00:22:14,630 Maria Adibi database. 238 00:22:16,070 --> 00:22:17,750 So, yes. 239 00:22:21,150 --> 00:22:28,800 So as we can see over here, we have the Maria Debe perfect and as we can see here, this is the two 240 00:22:28,800 --> 00:22:33,690 2000 2000 and the name we have, the RISC is perfect. 241 00:22:35,130 --> 00:22:39,720 And I would like to try to put my images. 242 00:22:39,720 --> 00:22:45,160 We can see here, this is the Maria DBI contain her image. 243 00:22:46,710 --> 00:23:02,760 Now, if I would like to see that the image images and with my piesse so we have this one, I assume 244 00:23:02,760 --> 00:23:04,050 I want to delete it. 245 00:23:05,520 --> 00:23:13,570 So I'm going to try to delete this one, the Maria de B, so we have the image. 246 00:23:14,850 --> 00:23:20,100 So here is the Maria De and I'm going to get the container image to see if it's going to allow me or 247 00:23:20,100 --> 00:23:20,490 not. 248 00:23:21,480 --> 00:23:24,410 It will not allow me because what it says that it's running. 249 00:23:24,900 --> 00:23:28,740 So what I need to do is I'm going to run the command, put my stop 250 00:23:31,680 --> 00:23:37,710 and I'm going to get the container it from here. 251 00:23:41,220 --> 00:23:43,110 Ginger, what's to blame? 252 00:23:43,170 --> 00:23:47,790 So one man, just to make sure that we don't have the Maria running anymore. 253 00:23:48,090 --> 00:23:48,620 Perfect. 254 00:23:48,630 --> 00:23:49,280 Wouldn't have it. 255 00:23:49,980 --> 00:23:51,680 Now I'm going to type them. 256 00:23:51,690 --> 00:24:04,170 I put my images, then I'm going to delete this one, put my aim and I'm going to type. 257 00:24:06,200 --> 00:24:07,590 A majority here. 258 00:24:09,860 --> 00:24:16,590 Well, sometimes if it doesn't allow you to use the option dishdasha force and I'm going to read the 259 00:24:16,600 --> 00:24:21,350 comment, man, put my images. 260 00:24:21,380 --> 00:24:26,810 As we can see, we don't have the EDB image anymore. 261 00:24:27,500 --> 00:24:37,010 If you would like to clear all the containers so we can run the command post man or and dash a. 262 00:24:39,670 --> 00:24:45,340 Some of them, it were not because you noticed them first, then you can't remove them. 263 00:24:47,120 --> 00:24:50,720 OK, so that's conclude decision. 264 00:24:51,550 --> 00:24:53,400 Thank you and see you on the next list.