1
00:00:00,840 --> 00:00:06,750
Hello, everyone, and Distomo, I'm going to show you how to to start and contain the images under

2
00:00:07,230 --> 00:00:14,730
the surface, they are two methods to alter starting container images under the surface.

3
00:00:16,200 --> 00:00:22,020
Before I'm going to explain the first method, as we can see here on the screen I'm using Tmax is a

4
00:00:22,020 --> 00:00:23,590
terminal multiplexed, sir.

5
00:00:24,180 --> 00:00:31,710
So what they did on the left side is a switch to user one here on both of those users.

6
00:00:31,710 --> 00:00:36,420
And you can see here, I think we have user to both of those user are in the same server.

7
00:00:36,420 --> 00:00:42,210
But what they did in the left side, this is the user one and on the right side, associate to user

8
00:00:42,210 --> 00:00:44,100
to get.

9
00:00:44,670 --> 00:00:48,420
So let's start now start sort the first method.

10
00:00:48,420 --> 00:00:51,270
I'm going to apply it to a user one and the second method.

11
00:00:51,270 --> 00:00:53,340
I'm going to apply it to our user, too.

12
00:00:56,580 --> 00:01:04,110
So the first method here before I'm going to run a container, I need to put into consideration that

13
00:01:04,110 --> 00:01:05,890
is Linux running with the system.

14
00:01:06,690 --> 00:01:12,480
So in this case, what I need to do, I need to activate the container managed C group POULIOT in order

15
00:01:12,480 --> 00:01:13,980
to run the containers.

16
00:01:14,880 --> 00:01:16,710
Which system do so?

17
00:01:16,800 --> 00:01:25,980
I'm going to how I get to know the value to get a spool dash ID and grep container to enter.

18
00:01:25,980 --> 00:01:28,020
As we can see here, it's off.

19
00:01:28,530 --> 00:01:30,900
So I need to use the sudo here.

20
00:01:30,910 --> 00:01:33,720
So set a spool then.

21
00:01:33,720 --> 00:01:38,070
About Kaspi advocates have to be uppercase in order to change the value.

22
00:01:38,070 --> 00:01:51,210
So container Manesh C Group then on the bus route and I'm going to run the command again to get a spool

23
00:01:51,210 --> 00:01:54,480
just to make sure that the values aren't perfect.

24
00:01:54,840 --> 00:01:59,550
Right now I'm going to run a container image GTP so Bruckmann

25
00:02:04,710 --> 00:02:12,930
padman run dashboard so I'm going to run this container in the background and also I'm going to give

26
00:02:12,930 --> 00:02:14,010
this container a name.

27
00:02:14,010 --> 00:02:21,330
So pitch ttp d then dush user one is there.

28
00:02:21,360 --> 00:02:27,720
So we're going to use it under the user one then he the second option.

29
00:02:28,170 --> 00:02:28,680
It's up to you.

30
00:02:28,680 --> 00:02:29,630
If you want to do it do it.

31
00:02:29,640 --> 00:02:35,580
So I'm going to give a person number four seven thousand seven thousand from the local machine to the

32
00:02:35,580 --> 00:02:42,210
container and container htp deep hitcher.

33
00:02:45,480 --> 00:02:52,050
Then I'm going to run the command port maps to make sure that the container is running in the background.

34
00:02:57,830 --> 00:03:00,890
Put man peace, as we can see over here.

35
00:03:01,850 --> 00:03:10,010
So the container is running and in the name of the container is each TPD, the user one.

36
00:03:11,030 --> 00:03:14,950
So next, I need to create a directory.

37
00:03:15,800 --> 00:03:19,730
Just make sure that you need to create a directory under the slash home slash user want.

38
00:03:20,330 --> 00:03:23,560
So make a directory dashboard.

39
00:03:23,930 --> 00:03:35,650
So this is the directory that I have to make config then slash sys system D slash user tenter.

40
00:03:36,160 --> 00:03:46,820
I go inside this directory system, the user, the P W.D. So make sure you have to generate the file,

41
00:03:46,820 --> 00:03:52,830
the system D volume you have to generate here under this directory.

42
00:03:53,510 --> 00:03:55,230
So what you're going to do right now.

43
00:03:56,300 --> 00:04:05,300
Uh, so I'm going to run the command post man generate System D and Dash Dash.

44
00:04:05,990 --> 00:04:08,960
So what's the name we call that image.

45
00:04:08,960 --> 00:04:15,920
HTTP D dash user one then dash dash firebase.

46
00:04:16,430 --> 00:04:19,430
So we're going to generate a system of defined configuration file.

47
00:04:20,570 --> 00:04:27,830
Alice, and also we need to run the command system, the system C two, dash, dash, user demand,

48
00:04:28,220 --> 00:04:28,790
reload.

49
00:04:28,800 --> 00:04:30,110
So to reload the surface,

50
00:04:33,660 --> 00:04:34,980
that is perfect.

51
00:04:35,030 --> 00:04:37,310
Right now we have this configuration file.

52
00:04:38,390 --> 00:04:41,350
Next, we need to modify this configuration file.

53
00:04:41,360 --> 00:04:44,480
We just need to modify one value here.

54
00:04:44,490 --> 00:04:47,950
So wanted pie under the section in a store.

55
00:04:49,010 --> 00:04:54,050
So we have to delete this one here, the multi user and change it to default.

56
00:04:55,220 --> 00:04:57,920
Skip before the target.

57
00:04:58,340 --> 00:04:59,240
Save the file.

58
00:04:59,870 --> 00:05:00,500
Perfect.

59
00:05:01,370 --> 00:05:04,120
Now what you need to do, you need to enable the surface.

60
00:05:04,700 --> 00:05:07,640
So system Sitel.

61
00:05:09,230 --> 00:05:19,320
Dash, dash, dash that she used to enable container dash, htp, dash user one, that surface hitting

62
00:05:19,400 --> 00:05:20,870
her perfect.

63
00:05:20,900 --> 00:05:21,710
We generated

64
00:05:24,830 --> 00:05:32,810
what the system, the surface five configuration file so well in this I'm not going to report.

65
00:05:32,810 --> 00:05:40,100
So just just for you, if you want to double check that the container will run even after we reboot.

66
00:05:40,100 --> 00:05:42,130
So you got to reboot the system.

67
00:05:42,150 --> 00:05:47,420
Then after that, after you reboot, you log into the system again, then you need to run the command

68
00:05:47,450 --> 00:05:47,930
system.

69
00:05:47,930 --> 00:05:50,780
Sitel, dash, dash user status.

70
00:05:50,780 --> 00:05:52,130
You check the status of.

71
00:05:54,970 --> 00:05:57,040
The surface container.

72
00:05:58,030 --> 00:06:05,170
Right now, it's not activated, but after we're going to reboot and then you return, you run this

73
00:06:05,320 --> 00:06:10,660
command again, you will notice that the surface is running perfect.

74
00:06:10,690 --> 00:06:12,100
Now, this is the first method.

75
00:06:13,060 --> 00:06:15,280
Now let's move on to the second method.

76
00:06:15,910 --> 00:06:18,250
So before I'm going to.

77
00:06:20,870 --> 00:06:28,790
Before I'm going to explain the second method, I need to turn off the AC Lennox, that is why I need

78
00:06:28,790 --> 00:06:31,840
to like not to turn it off, but I need to change the value.

79
00:06:31,880 --> 00:06:40,220
So here is the value that I'm talking about, a spool that's to get a grip container, because in the

80
00:06:40,220 --> 00:06:41,630
second method, it needs it.

81
00:06:42,110 --> 00:06:43,940
So I need to turn it off.

82
00:06:44,510 --> 00:06:50,580
So what I'm going to do so is to do so.

83
00:06:50,600 --> 00:07:04,280
Do it, pull over Kaspi the container, manage Seagrove of the buzzword and then after that I'm going

84
00:07:04,280 --> 00:07:12,600
to double check that the values of perfectness, of care of the screen.

85
00:07:13,010 --> 00:07:15,470
Now I'm going to explain the second method.

86
00:07:16,780 --> 00:07:26,200
So when the second method I need to organize in a route user first and it has to be this is now clear

87
00:07:26,740 --> 00:07:28,720
and it has to be from a different.

88
00:07:31,950 --> 00:07:35,820
Well, a root password, so even if you're going to do it here under the username, but you're going

89
00:07:35,820 --> 00:07:40,740
to look at it as a root user, then after that you can do that.

90
00:07:41,310 --> 00:07:44,090
You can use the log in Ctrl.

91
00:07:45,360 --> 00:07:49,230
So this is the log and why we need to use the log login.

92
00:07:49,340 --> 00:07:50,940
Still enable linger.

93
00:07:51,480 --> 00:07:52,180
This one here.

94
00:07:52,740 --> 00:07:59,550
So we need to use that one or discriminant in order to enable us to start services for a particular

95
00:07:59,550 --> 00:08:00,030
user.

96
00:08:00,880 --> 00:08:07,490
So, as I said that we to enable the surface for users to know for sure.

97
00:08:07,900 --> 00:08:12,370
User Mary, as we can see, the lingers on.

98
00:08:13,720 --> 00:08:18,310
But in case if it's not on, let's do it here.

99
00:08:18,490 --> 00:08:23,200
You step here, linger still if it's visible, linger.

100
00:08:23,200 --> 00:08:29,590
So we'll do it for user mail just in case that it's not on.

101
00:08:30,640 --> 00:08:33,250
So we disable it, but we need to enable it again.

102
00:08:48,380 --> 00:08:48,930
To enable.

103
00:08:48,980 --> 00:08:53,900
Just to make sure that if in case, like if you're going to run that command and if it's not.

104
00:08:55,410 --> 00:08:55,750
Sure.

105
00:08:55,860 --> 00:09:01,620
Here again, if they linger, it's off or it's not here, you need to enable a.

106
00:09:01,890 --> 00:09:02,910
How are you going to enable it?

107
00:09:02,940 --> 00:09:09,870
So you need to run the command log and still then after that, enable.

108
00:09:11,150 --> 00:09:17,360
Dash lingered in the name of the user, so user to.

109
00:09:19,300 --> 00:09:26,980
You enable that, then after that, you want to double check users to and as you can see for here,

110
00:09:27,220 --> 00:09:29,900
it's the Lingga is yes, perfect.

111
00:09:29,920 --> 00:09:34,700
Right now we finish this step and we did it under the producer.

112
00:09:35,260 --> 00:09:45,070
Now we're going to switch to user to right now and user two, we're going to do the same steps as the

113
00:09:45,070 --> 00:09:46,480
only difference, what we did here.

114
00:09:46,600 --> 00:09:54,550
We use the log and still enable longer in order to enable the longer for user to.

115
00:09:56,250 --> 00:10:04,650
Well, we do that because we want to enable and start surfaces for a particular user, and he can do

116
00:10:04,650 --> 00:10:06,960
that through this comment.

117
00:10:07,950 --> 00:10:10,550
Okay, let's move on to this command right now.

118
00:10:10,560 --> 00:10:13,320
So I'm going to pull an image.

119
00:10:14,750 --> 00:10:19,800
Right now, so put mad dash own, dash the.

120
00:10:21,570 --> 00:10:33,780
Then going to call this image H.T., TPD, user to user to and image TGP, so we're going to run this

121
00:10:33,780 --> 00:10:35,330
image in the background.

122
00:10:36,810 --> 00:10:42,000
And after we going to run this image in the background, we're going to do the same thing, we're going

123
00:10:42,000 --> 00:10:43,380
to create a directory.

124
00:10:44,370 --> 00:10:53,110
And add the slash and slash user, too, and this directly would be that cornflake slash EMT slash user.

125
00:10:53,760 --> 00:10:57,090
So just after we do the before we do that.

126
00:10:57,100 --> 00:11:05,410
So yes, I want to check put maps and we have right now is the container is running in the background.

127
00:11:05,460 --> 00:11:05,940
Perfect.

128
00:11:06,420 --> 00:11:08,720
So we are under this directory.

129
00:11:09,450 --> 00:11:16,020
So now we can have to make another directory and make that actually HP can't fake.

130
00:11:20,410 --> 00:11:24,100
System D user.

131
00:11:26,880 --> 00:11:39,380
June and I go inside this directress system, uh, user, PWP, uh, slash slash user to slash dot com

132
00:11:39,710 --> 00:11:41,840
slash EMT slash user.

133
00:11:42,980 --> 00:11:48,140
Now, what we need to do, we need to generate a system, the configuration file.

134
00:11:48,620 --> 00:11:54,080
So generate System D, dash, dash.

135
00:11:54,510 --> 00:12:03,200
You you know, the name that we call the the container user to dash dash files.

136
00:12:05,370 --> 00:12:06,510
Container name.

137
00:12:09,720 --> 00:12:12,410
Yes, double check, we're going to double check here.

138
00:12:13,980 --> 00:12:19,680
But, man, he is OK, this is Joe.

139
00:12:21,720 --> 00:12:25,650
Container computer generated.

140
00:12:27,150 --> 00:12:35,610
See if we have the file here, we don't have a man, jeanneret systemd dash dash.

141
00:12:37,460 --> 00:12:38,060
Name.

142
00:12:40,500 --> 00:12:43,230
Yeah, that's that's phials.

143
00:12:44,490 --> 00:12:46,110
Perfect generated the fire.

144
00:12:48,240 --> 00:12:55,710
This is the configuration file right now, so I'm going to use the system DC to dash dash user, then

145
00:12:56,490 --> 00:13:01,080
demand that we load it into the next step.

146
00:13:01,080 --> 00:13:03,180
We need to change this line.

147
00:13:03,420 --> 00:13:07,950
And there's a section installed so the installed in one gets by.

148
00:13:07,960 --> 00:13:10,500
So we need to change this file to default.

149
00:13:15,410 --> 00:13:20,600
Save the fire just to make sure you're wanted by equality for that target.

150
00:13:21,260 --> 00:13:21,890
Perfect.

151
00:13:23,360 --> 00:13:31,910
Now, what you need to do, system, dash, dash system that enabled me to enable the surface to contain.

152
00:13:32,780 --> 00:13:35,070
And we generated the fire.

153
00:13:35,070 --> 00:13:35,210
Right.

154
00:13:35,360 --> 00:13:37,240
That is, as we can see over here.

155
00:13:37,640 --> 00:13:44,390
Now, if I was rated like a subway looking for it and as I mentioned, just to make sure and double

156
00:13:44,390 --> 00:13:45,890
check, you need to report.

157
00:13:46,580 --> 00:13:52,250
So after reboot the system and again, again, then you need to run this command system.

158
00:13:52,520 --> 00:14:05,300
Sitel dash dash user statis container dash htp dash user to that surface hit enter.

159
00:14:05,330 --> 00:14:13,400
I know not it's dead right now but just to make sure that the surface is running and it will be running

160
00:14:13,430 --> 00:14:15,100
if you followed all the steps.

161
00:14:15,500 --> 00:14:18,880
So I mean this demo I showed you two methods.

162
00:14:19,070 --> 00:14:26,690
So the first one we used up, we had to change the the, the podium value for the is Linux.

163
00:14:27,080 --> 00:14:34,940
And the second method we use the log and still enable linger command in order to enable it to start

164
00:14:34,940 --> 00:14:38,180
services for a particular user.

165
00:14:39,740 --> 00:14:41,120
Thus come to a decision.

166
00:14:41,360 --> 00:14:42,440
Thank you very much.