You have 120 minutes to finish this exam. The exam starts after you finish the Preliminary tasks.
Preliminary Tasks:
Build a minimal installation virtual machine with the following specifications:
The virtual machine will have a 10 GB disk space for the Operating System.
Add three 1 GB disks to the virtual machine.
Add three 2 GB disks to the virtual machine.
You have 120 minutes now to complete the following tasks. Good Luck!
Create a user named tom, this user shall have a user id of 777 and a nologin shell.
Create five users: student, jerry, laura, mary and scott with home directories in /home.
Set their passwords to RHCSA123$
Make accounts for mary and scott to expire on December 31, 2030
Users jerry and laura should have their secondary groups set to the group database (Create the group if it doesnt exist).
Add a group called developers and change the group ownership on /mnt/mobile to the group developers.
Set read/write/execute permissions on the directory /mnt/mobile to the owner and group members and no permissions for others.
Create a Directory called dir2 as a user laura in her home directory and set default ACLs (Access Control List) on it for user mary for read and write access.
Modify the boot loader configuration and set the default autoboot timer value to 2 seconds.
Configure your firewall to accept all ftp traffic to the system.
Give user tom sudo access (with no password prompts) to the following tools:
yum.
firewall-cmd
Start Firewalld and make sure it starts automatically on boot.
Create a volume group named vg_apps using the two disks /dev/sdb and /dev/sdc.
Create a logical volume named lv_mobile with size of 7GB with mount point /mnt/mobile (create the mount point as well) formatted with xfs file system structure and a block size of 100MB.
Create a file named pixel.txt in the mount point and Set the file system to automatically mount at each system reboot.
Create a swap partition of size 100MB on the disk /dev/sdd. Use its UUID and ensure it is activated after every system reboot. Make sure the swap partition is enabled as well.
Create a standard partition of size 100MB on any available disk and format it with the ext4 file system structure.
Mount the file system on /mnt/ext4 (create the mount point if it doesnt exist) persistently using a LABEL=STANDARD. Also create a file called docker.txt in the mount point.
Create a temporary directory named /run/hello and create temporary file inside /run/hello named temp1.txt
Add a host 172.16.1.101 with an alias RHCSA.
Create a new network connection myhome-connection with the following ( ip address 192.168.0.1/24 - gateway 192.168.0.254 - DNS 192.168.0.254 ).
Install the minimal PHP module with version 7.1 on your system.
Using only the tar command, create a compressed archive using xz compression method of the /etc/yum.repos.d directory. Name the files repos.tar.xz and store the file in directory /root/compressed (create compressed if its not there already).
Install nfs on the system. Create the directory /media/nfs and Permanently mount the NFS-SHARE at ip address 192.168.0.10 on /media/nfs
Lets assume there is an NFS share on 192.168.100.113 with the name of NFS_SHARE. Mount the NFS_SHARE on /files/mynfs on demand with a timeout of 10 seconds.