WEBVTT - This file was automatically generated by VIMEO

0
00:00:14.700 --> 00:00:18.000
Hey, welcome back to this video. So in

1
00:00:17.100 --> 00:00:20.700
 this video we are going to see some of the

2
00:00:20.700 --> 00:00:23.200
 networking commands that are

3
00:00:23.200 --> 00:00:25.700
 being used in Linux operating systems.

4
00:00:26.500 --> 00:00:28.000
So let's quickly begin.

5
00:00:28.800 --> 00:00:31.500
The First Command that we are going to see is

6
00:00:31.500 --> 00:00:35.300
 if config now this stands

7
00:00:34.300 --> 00:00:38.000
 for interface configuration and

8
00:00:37.600 --> 00:00:40.500
 it is going to show us the

9
00:00:40.500 --> 00:00:43.800
 interfaces that have been connected to our

10
00:00:43.800 --> 00:00:44.700
 operating system.

11
00:00:45.600 --> 00:00:48.600
So let's hit enter and let's see. What do

12
00:00:48.600 --> 00:00:51.900
 we get? And you can see over here. We have different

13
00:00:51.900 --> 00:00:54.100
 interfaces like et80.

14
00:00:54.800 --> 00:00:57.900
H1 and lo which

15
00:00:57.900 --> 00:00:59.200
 is the loopback adapter

16
00:00:59.800 --> 00:01:00.100
now

17
00:01:01.400 --> 00:01:05.100
et80 is basically the first adapter into

18
00:01:04.100 --> 00:01:07.800
 your operating system and the IP

19
00:01:07.800 --> 00:01:10.500
 address that is being assigned to your

20
00:01:10.500 --> 00:01:14.700
 computer is represented over here by Inlet

21
00:01:13.700 --> 00:01:16.300
 and you can see this is the

22
00:01:16.300 --> 00:01:19.200
 IP address that has been assigned to my

23
00:01:19.200 --> 00:01:20.000
 operating system.

24
00:01:20.800 --> 00:01:23.500
Now you can add as many as

25
00:01:23.500 --> 00:01:26.600
 network adapters you want to your computer? So I've

26
00:01:26.600 --> 00:01:29.300
 already added one more but there is no IP address

27
00:01:29.300 --> 00:01:32.500
 assigned to this particular network adapter

28
00:01:32.500 --> 00:01:35.600
 as this has been disconnected currently and I'm

29
00:01:35.600 --> 00:01:37.300
 using the EDH 0.

30
00:01:38.400 --> 00:01:42.000
So this is one of the way seeing the network adapters

31
00:01:41.600 --> 00:01:44.400
 seeing the IP address. You can

32
00:01:44.400 --> 00:01:47.400
 also check your Hardware address, which is

33
00:01:47.400 --> 00:01:51.200
 also called as ether which is your Mac

34
00:01:50.200 --> 00:01:53.400
 address. All right, so there is

35
00:01:53.400 --> 00:01:56.600
 one more command to see the similar output which

36
00:01:56.600 --> 00:01:58.800
 is used which is IPA.

37
00:01:59.700 --> 00:02:02.300
Now by typing this command you are

38
00:02:02.300 --> 00:02:05.400
 able to see a lot of adapters into

39
00:02:05.400 --> 00:02:08.200
 your computer, yes, you can see over here

40
00:02:09.300 --> 00:02:12.700
you can see it is 0 e dh1 you can

41
00:02:12.700 --> 00:02:15.400
 see Docker Etc. Now this gives

42
00:02:15.400 --> 00:02:18.800
 exactly the same output but you can always utilize

43
00:02:18.800 --> 00:02:21.400
 both of the commands. There is

44
00:02:21.400 --> 00:02:25.300
 one more way to do that. You can type IP space add

45
00:02:24.300 --> 00:02:27.100
 and it is going to give you

46
00:02:27.100 --> 00:02:30.400
 the same output which you can see onto your

47
00:02:30.400 --> 00:02:33.500
 terminal now, this is handy in case

48
00:02:33.500 --> 00:02:36.200
 you want to know your IP address in case you want

49
00:02:36.200 --> 00:02:39.900
 to know your Hardware address subnet mask Etc.

50
00:02:40.500 --> 00:02:43.400
So I hope you guys understood this. Let's see

51
00:02:43.400 --> 00:02:46.500
 one more thing. In which in case you want to see a

52
00:02:46.500 --> 00:02:49.600
 specific IP address for us

53
00:02:49.600 --> 00:02:52.400
 specific network adapter or

54
00:02:52.400 --> 00:02:56.200
 driver. So for that you can simply type ipadr.

55
00:02:57.400 --> 00:02:58.200
space show

56
00:02:59.100 --> 00:03:02.700
device and the device name and

57
00:03:02.700 --> 00:03:05.500
 hit enter and you can see over here. We have

58
00:03:05.500 --> 00:03:08.600
 got the et80 the adapter

59
00:03:08.600 --> 00:03:12.100
 that has been connected and you can see the inet

60
00:03:11.100 --> 00:03:14.800
 the IP address that has been assigned to

61
00:03:14.800 --> 00:03:17.200
 this and you can see other details as well

62
00:03:17.200 --> 00:03:21.000
 in case you want to see details for next adapter

63
00:03:20.300 --> 00:03:23.500
 or any other adapter. You can

64
00:03:23.500 --> 00:03:27.000
 also see that currently this adapter is

65
00:03:26.900 --> 00:03:30.200
 inactive, hence. There is no IP

66
00:03:29.200 --> 00:03:32.200
 address which has been assigned to

67
00:03:32.200 --> 00:03:32.700
 this one.

68
00:03:33.600 --> 00:03:36.500
So I hope you guys understood how to check your IP address

69
00:03:36.500 --> 00:03:38.900
 using three different ways. Thank you.
