WEBVTT - This file was automatically generated by VIMEO

0
00:00:09.140 --> 00:00:12.920
Hi and welcome back to Section nine wireless attacks.

1
00:00:13.920 --> 00:00:14.753
In this video,

2
00:00:15.080 --> 00:00:20.060
we are going to leverage the collected interation from our reconnaissance phase

3
00:00:20.520 --> 00:00:23.540
to attack a W P vulnerable network.

4
00:00:25.340 --> 00:00:27.860
I hope you're excited. So let's in,

5
00:00:28.440 --> 00:00:30.380
so now that we're back on Car Lenox,

6
00:00:30.670 --> 00:00:34.700
let's leverage the reconnaissance information from the previous phase.

7
00:00:36.300 --> 00:00:41.160
What we wanna do is collect packets from our target

8
00:00:41.160 --> 00:00:43.550
network to collect pockets.

9
00:00:43.550 --> 00:00:46.230
We do not need to be connected to the target network.

10
00:00:46.970 --> 00:00:50.950
We simply need to be within the vicinity simply as though we are performing

11
00:00:50.950 --> 00:00:51.783
reconnaissance.

12
00:00:52.010 --> 00:00:56.590
But we are going to drill down and focus on the actual network

13
00:00:56.900 --> 00:01:01.080
name together with the channel. So therefore,

14
00:01:01.140 --> 00:01:03.520
we are going to use this command.

15
00:01:05.080 --> 00:01:09.720
We are going to use adom command. We'll specify to listen on channel four.

16
00:01:10.250 --> 00:01:15.160
We'll specify seek out and listen for the target on

17
00:01:15.160 --> 00:01:15.993
the network.

18
00:01:16.650 --> 00:01:21.320
We'll specify the wireless monitoring interface two use dash W

19
00:01:21.950 --> 00:01:26.680
will specify to write a collected data to the file or files

20
00:01:26.950 --> 00:01:29.040
with the name target network capture.

21
00:01:30.030 --> 00:01:34.520
This will simply allow us to focus on our target network only

22
00:01:34.950 --> 00:01:37.920
without changing channels. Simply by default.

23
00:01:38.670 --> 00:01:43.240
Adom changes channels between one to 11 to monitor all wireless

24
00:01:43.320 --> 00:01:48.150
networks and stations within vicinity by using dash C.

25
00:01:48.650 --> 00:01:52.150
We are going to listen only on the 2.4 gigs,

26
00:01:52.460 --> 00:01:54.950
channel number four specifically.

27
00:01:55.170 --> 00:01:58.990
We are also going to look for this network, the target network,

28
00:01:59.650 --> 00:02:04.250
and write the data to an output file. So I'm gonna hit enter.

29
00:02:05.240 --> 00:02:08.790
Great. Notice that we are only seeing our target network,

30
00:02:09.400 --> 00:02:14.240
which is target on network. We are also seeing the encryption type,

31
00:02:14.330 --> 00:02:15.520
which is wp.

32
00:02:16.350 --> 00:02:20.620
We can see the BS society of the network itself,

33
00:02:21.470 --> 00:02:24.910
the power, the number of beacons, the data.

34
00:02:25.850 --> 00:02:28.070
And if you look at the last line here,

35
00:02:28.520 --> 00:02:33.230
under BS societies and station, we have one connected station.

36
00:02:35.300 --> 00:02:38.120
So therefore we are capturing all pockets,

37
00:02:38.350 --> 00:02:42.160
well all wireless frames that are associated with our target network.

38
00:02:42.940 --> 00:02:44.920
We need to capture a lot of data,

39
00:02:45.380 --> 00:02:48.240
at least 10,000 or 20,000 liter.

40
00:02:48.820 --> 00:02:51.920
And if you notice that the data is increasing very slowly,

41
00:02:52.420 --> 00:02:56.960
simply because there isn't much clients and even traffic being generated on our

42
00:02:56.960 --> 00:02:59.810
target network. To increase the traffic flow,

43
00:03:00.310 --> 00:03:04.720
we can simply perform an A R P attack.

44
00:03:05.290 --> 00:03:06.123
To do this,

45
00:03:06.380 --> 00:03:10.910
open another terminal and we are going to use pseudo airplay

46
00:03:11.580 --> 00:03:16.260
dash. We'll use a dash three syntax to perform.

47
00:03:16.480 --> 00:03:17.340
An A R P

48
00:03:19.250 --> 00:03:23.820
will specify dash B and the BS society of our target

49
00:03:24.280 --> 00:03:29.220
access point will specify dash H to specify a

50
00:03:29.220 --> 00:03:32.940
target host device to perform the repair attack against.

51
00:03:33.280 --> 00:03:37.740
So simply the repair attack will happen between the access point

52
00:03:38.440 --> 00:03:40.180
and this connected client.

53
00:03:41.330 --> 00:03:46.090
Remember we got the client information from performing reconnaissance like zoo,

54
00:03:47.160 --> 00:03:51.060
and we'll also specify our WLAN zero monitor interface.

55
00:03:52.450 --> 00:03:55.590
I'm simply going to put this window a little to the corner like zoo

56
00:03:58.480 --> 00:04:02.140
and let's look at what happens. I'm going to enter,

57
00:04:03.170 --> 00:04:08.040
simply enter your password like this and notice the

58
00:04:08.040 --> 00:04:12.880
attack has started. The data seems to be increasing a little bit,

59
00:04:14.000 --> 00:04:18.740
and eventually the client may be disconnected and try to attempt to reconnect.

60
00:04:19.400 --> 00:04:20.233
We

61
00:04:21.840 --> 00:04:25.320
need to leave this attack running for a long period of time

62
00:04:26.870 --> 00:04:30.460
simply because we need to capture a lot of data. Also,

63
00:04:30.680 --> 00:04:34.820
if you notice in a data column, it has started to increase significantly.

64
00:04:35.370 --> 00:04:39.660
This means to say the client was disconnected and it reconnected.

65
00:04:40.480 --> 00:04:44.460
So we need to capture a lot of this data for a long period of time.

66
00:04:45.270 --> 00:04:49.850
The more data we capture simply increases the likelihood that we are able to

67
00:04:50.130 --> 00:04:54.130
retrieve the W E P key for the actual target network.

68
00:04:55.320 --> 00:04:56.970
Because the client was disconnected,

69
00:04:57.270 --> 00:05:01.730
we can see on the probes a probe was sent looking for target on the score

70
00:05:01.730 --> 00:05:02.563
network.

71
00:05:02.950 --> 00:05:06.810
So I'm gonna pause the screen and leave this to run for a few minutes.

72
00:05:08.300 --> 00:05:12.130
Great. So after a few minutes, as pass, as you can see,

73
00:05:12.130 --> 00:05:15.730
it has captured over 100,000 messages.

74
00:05:16.910 --> 00:05:20.610
So now I'm gonna stop the attack by press C

75
00:05:21.710 --> 00:05:23.530
and I'll press control C.

76
00:05:23.990 --> 00:05:28.170
To finish writing to the actual output file, I'm gonna type click.

77
00:05:28.840 --> 00:05:32.930
Next. I'm gonna type LS dash L to take a look at the files,

78
00:05:33.230 --> 00:05:34.063
our directory,

79
00:05:34.950 --> 00:05:39.770
and notice that we have captured the wireless frames and it is written to a

80
00:05:39.790 --> 00:05:44.410
cap File, a CSV file, kismet file, an log file.

81
00:05:45.110 --> 00:05:49.490
We can use a command to perform w p

82
00:05:50.250 --> 00:05:54.010
password cracking on this file. To do this,

83
00:05:54.310 --> 00:05:55.330
we can type pseudo

84
00:05:59.500 --> 00:06:03.420
followed by the name of the file and hit enter like Sue.

85
00:06:05.420 --> 00:06:08.640
And here we go. With all of this data we have captured,

86
00:06:09.530 --> 00:06:11.030
it has found the key.

87
00:06:11.710 --> 00:06:16.290
We can simply copy the key and enter it when connecting to the target

88
00:06:16.590 --> 00:06:19.970
nsu. But keep in mind that when enter the key,

89
00:06:20.390 --> 00:06:21.970
simply remove the colons.

90
00:06:22.590 --> 00:06:26.890
And this will allow us to connect to the target network and gain access to the

91
00:06:26.890 --> 00:06:28.530
entire wireless network infrastructure.

92
00:06:31.340 --> 00:06:35.880
During the course of this video, you have learned how to attack a W eep network.

93
00:06:37.760 --> 00:06:38.593
In the next video,

94
00:06:38.760 --> 00:06:43.220
you'll discover how to attack WPA and WPA to wireless

95
00:06:43.260 --> 00:06:46.580
networks. I hope this video has been informative for you.

96
00:06:46.880 --> 00:06:48.020
And thank you for viewing.
