WEBVTT - This file was automatically generated by VIMEO

0
00:00:06.200 --> 00:00:09.600
Hi and welcome back to section 1 netcat introduction

1
00:00:09.600 --> 00:00:12.800
 in this video. We're going to look at some comments

2
00:00:12.800 --> 00:00:15.200
 options to understand the possibilities of

3
00:00:15.200 --> 00:00:18.800
 commands and operations that are possible in netcats

4
00:00:18.800 --> 00:00:21.800
 because that cat is available for different operations

5
00:00:21.800 --> 00:00:24.500
 systems in different versions. We will focus

6
00:00:24.500 --> 00:00:27.800
 on the main options available for all operating systems.

7
00:00:27.800 --> 00:00:30.300
 We in some assumptions the main

8
00:00:30.300 --> 00:00:33.900
 options present in the most versions are -

9
00:00:33.900 --> 00:00:36.400
 H to display the version of the two

10
00:00:36.400 --> 00:00:39.500
 common line and the options available in these

11
00:00:39.500 --> 00:00:42.500
 version of Snapchat Dash V. It's about

12
00:00:42.500 --> 00:00:45.200
 very positive these result in the

13
00:00:45.200 --> 00:00:46.800
 level in the verbosity.

14
00:00:47.600 --> 00:00:50.100
Add the results of netgate we showed that

15
00:00:50.100 --> 00:00:54.100
 is going on for each step that the two is taken

16
00:00:53.100 --> 00:00:56.900
 when executing our inner common or

17
00:00:56.900 --> 00:00:59.900
 when it receives an external command.

18
00:01:01.300 --> 00:01:02.200
HL

19
00:01:03.300 --> 00:01:06.500
Or listen listen serum mode when you

20
00:01:06.500 --> 00:01:09.800
 use the L option you set netcat

21
00:01:09.800 --> 00:01:11.000
 to the server mode.

22
00:01:12.300 --> 00:01:15.400
That is mean that netcat is able to listen to

23
00:01:15.400 --> 00:01:18.500
 any connection from some specific port.

24
00:01:20.700 --> 00:01:20.700
-

25
00:01:21.400 --> 00:01:21.900
e

26
00:01:22.500 --> 00:01:26.200
allows netcut to execute a specific program when a

27
00:01:25.200 --> 00:01:27.100
 client connects to it.

28
00:01:27.900 --> 00:01:30.400
If the problem is a terminal or shell, it's

29
00:01:30.400 --> 00:01:33.600
 a powerful option because it's allow our incoming

30
00:01:33.600 --> 00:01:36.100
 clients to connect to netcat and a

31
00:01:36.100 --> 00:01:40.100
 direct shell access because there is no user identification

32
00:01:39.100 --> 00:01:42.600
 or authentication process associate with

33
00:01:42.600 --> 00:01:44.100
 this access.

34
00:01:45.500 --> 00:01:47.600
- Z or zero, IO

35
00:01:48.200 --> 00:01:52.000
And data will be passed to the receiver essentially for

36
00:01:51.100 --> 00:01:54.700
 DCP. This is a three handshake.

37
00:01:55.600 --> 00:01:56.400
Dash k

38
00:01:57.100 --> 00:02:00.200
This option reops netcat with the same cone line

39
00:02:00.200 --> 00:02:01.600
 after the original connection.

40
00:02:03.500 --> 00:02:03.900
Dash o

41
00:02:05.200 --> 00:02:08.100
It's create a file that represents a log of

42
00:02:08.100 --> 00:02:11.400
 the connections traffic when xodex mode formation

43
00:02:11.400 --> 00:02:12.000
 and text.

44
00:02:13.800 --> 00:02:17.000
- R this option randomized ports

45
00:02:16.700 --> 00:02:19.800
 in serving mode - R will also

46
00:02:19.800 --> 00:02:22.400
 randomize local Source ports

47
00:02:24.900 --> 00:02:25.400
-w

48
00:02:26.300 --> 00:02:30.300
followed by seconds to set the network inactivity timeout

49
00:02:31.500 --> 00:02:34.100
That's you is UDP mode.

50
00:02:34.900 --> 00:02:38.100
Since UDP is a characterless protocol. It's

51
00:02:37.100 --> 00:02:41.100
 recommended that is use timeouts with

52
00:02:40.100 --> 00:02:41.900
 midi this option.

53
00:02:42.700 --> 00:02:45.400
So let's start first of all how you use

54
00:02:45.400 --> 00:02:48.000
 the netcat in the

55
00:02:48.600 --> 00:02:49.300
 Microsoft Windows environment.

56
00:02:50.400 --> 00:02:54.000
And then I will use the netcat the Gino

57
00:02:53.200 --> 00:02:56.600
 version available in Linux environment.

58
00:02:56.600 --> 00:02:58.700
 So let me start in Windows environment.

59
00:03:02.200 --> 00:03:05.400
First we are you use the option -

60
00:03:05.400 --> 00:03:09.100
 H to verify the version of

61
00:03:08.100 --> 00:03:11.600
 the netcat and the list

62
00:03:11.600 --> 00:03:14.600
 of options available for this these two

63
00:03:14.600 --> 00:03:17.200
 so that's a and I will

64
00:03:17.200 --> 00:03:20.200
 add the pipe more just to get

65
00:03:20.200 --> 00:03:23.300
 the freeze screen in blocks of

66
00:03:23.300 --> 00:03:26.600
 information to be more easy to read the information

67
00:03:26.600 --> 00:03:27.700
 first.

68
00:03:28.500 --> 00:03:31.000
We can we we are able to see the

69
00:03:31.500 --> 00:03:32.400
 version of netcat here.

70
00:03:33.400 --> 00:03:36.400
And this is a version for any

71
00:03:36.400 --> 00:03:38.200
 map project. Netcat.

72
00:03:41.900 --> 00:03:44.300
We're not talking about netcat. We are

73
00:03:44.300 --> 00:03:47.600
 talking about two that can be

74
00:03:47.600 --> 00:03:49.800
 using in the server mode and

75
00:03:51.600 --> 00:03:52.300
client mode

76
00:03:52.900 --> 00:03:55.600
the server mode is available when you

77
00:03:55.600 --> 00:03:57.900
 when we use the dash.

78
00:03:59.300 --> 00:04:00.400
L for listen

79
00:04:01.300 --> 00:04:04.900
when you start that cat using Dash L. The netcat

80
00:04:04.900 --> 00:04:07.700
 is able to listen in this is

81
00:04:07.700 --> 00:04:10.500
 specific Port from any client.

82
00:04:14.200 --> 00:04:18.400
First we are used the dash V for VivoCity.

83
00:04:17.400 --> 00:04:19.600
 That's mean that.

84
00:04:20.400 --> 00:04:23.600
When you are using the HV all the steps

85
00:04:23.600 --> 00:04:25.500
 that not get are doing.

86
00:04:26.400 --> 00:04:30.900
For send information or receiving information some information

87
00:04:30.900 --> 00:04:33.500
 about this step will be print in this

88
00:04:33.500 --> 00:04:36.300
 in the in the screen. So it's more easy

89
00:04:36.300 --> 00:04:39.600
 to understand what's going on at that

90
00:04:39.600 --> 00:04:41.000
 moment. When used netcat.

91
00:04:41.600 --> 00:04:41.700
so

92
00:04:42.600 --> 00:04:45.600
For this producers employ here. We are start netget

93
00:04:45.600 --> 00:04:48.300
 in the list listed mode. That means

94
00:04:48.300 --> 00:04:49.100
 the server mode.

95
00:04:50.100 --> 00:04:53.400
And we we can specify a port.

96
00:04:55.400 --> 00:04:55.800
to say

97
00:04:57.200 --> 00:05:00.500
Hey, I'm starting netcat. I mean this specific Port so

98
00:05:00.500 --> 00:05:04.100
 we're gonna use for example part 1

99
00:05:03.100 --> 00:05:05.100
 2 3 4 5.

100
00:05:06.500 --> 00:05:09.300
So we add this moment. Netcat is telling

101
00:05:09.300 --> 00:05:11.100
 us that and listen.

102
00:05:12.700 --> 00:05:13.000
here

103
00:05:13.800 --> 00:05:15.700
I'm using the localhost.

104
00:05:16.400 --> 00:05:19.100
And I'm connect I mean

105
00:05:19.100 --> 00:05:19.600
 this sport here.

106
00:05:20.600 --> 00:05:23.400
So netcat is listen any connection

107
00:05:23.400 --> 00:05:24.800
 from the sport here.

108
00:05:25.700 --> 00:05:28.000
when these another prompt

109
00:05:28.800 --> 00:05:31.800
I will use netcat and I

110
00:05:31.800 --> 00:05:32.000
 will connect.

111
00:05:33.100 --> 00:05:36.700
From this available Port so I use Dash V

112
00:05:36.700 --> 00:05:39.600
 to get the very boracity and

113
00:05:39.600 --> 00:05:41.600
 get more details about my my connection.

114
00:05:42.900 --> 00:05:45.300
I have to specify the host. So

115
00:05:45.300 --> 00:05:47.600
 the host is lockout host.

116
00:05:48.600 --> 00:05:51.500
And I will specify a port so a port

117
00:05:51.500 --> 00:05:52.800
 is one two, three, four five.

118
00:05:54.400 --> 00:05:55.100
So at this moment.

119
00:05:56.900 --> 00:05:57.500
I'm connected.

120
00:05:59.100 --> 00:06:02.500
And I'm able to exchange some

121
00:06:02.500 --> 00:06:05.400
 information between these two

122
00:06:05.400 --> 00:06:07.700
 connections. So I say hi.

123
00:06:15.600 --> 00:06:15.900
Hello.

124
00:06:20.700 --> 00:06:23.600
in the server here is the server here was able

125
00:06:23.600 --> 00:06:26.000
 to First he's able to

126
00:06:27.200 --> 00:06:28.300
identify a connection

127
00:06:30.100 --> 00:06:33.100
they will print the port that this.

128
00:06:34.200 --> 00:06:37.300
This netcat here this prompt use it to connect

129
00:06:37.300 --> 00:06:40.400
 when this part because in this

130
00:06:40.400 --> 00:06:43.300
 prompt here I say hey, I'm ready to

131
00:06:43.300 --> 00:06:45.100
 listen from this port.

132
00:06:47.800 --> 00:06:49.300
And this client here?

133
00:06:50.100 --> 00:06:50.800
Use it.

134
00:06:51.700 --> 00:06:52.800
local port

135
00:06:54.200 --> 00:06:56.600
For example this part here to connect.

136
00:06:57.300 --> 00:07:00.600
To this part here. So we are talking about two components

137
00:07:00.600 --> 00:07:01.500
 and

138
00:07:03.400 --> 00:07:06.600
connection destination port and initial initial port

139
00:07:07.600 --> 00:07:10.500
So the connection is done and the first information is

140
00:07:10.500 --> 00:07:11.800
 right is ready here.

141
00:07:12.800 --> 00:07:15.200
And the server will we respond for?

142
00:07:16.500 --> 00:07:19.600
Hi, and we can verify that the connection

143
00:07:19.600 --> 00:07:23.100
 is working and the text the

144
00:07:22.100 --> 00:07:23.800
 data.

145
00:07:24.700 --> 00:07:27.600
Is going to One Direction

146
00:07:27.600 --> 00:07:30.100
 from from an authorization to another Direction.

147
00:07:35.900 --> 00:07:38.600
In this same example, I will stop the

148
00:07:38.600 --> 00:07:39.300
 tool here.

149
00:07:41.200 --> 00:07:43.500
And I will start a server without.

150
00:07:44.300 --> 00:07:46.600
The V option verbose the option.

151
00:07:47.200 --> 00:07:51.300
Just show how can I use the

152
00:07:50.300 --> 00:07:52.800
 netcat?

153
00:07:53.400 --> 00:07:56.100
But look we have we don't have

154
00:07:56.100 --> 00:07:58.200
 no information like before.

155
00:07:59.700 --> 00:08:00.900
So let's mean that.

156
00:08:02.700 --> 00:08:04.700
All the connection that that we have here.

157
00:08:07.300 --> 00:08:11.000
Is more we don't have more information available. So

158
00:08:10.400 --> 00:08:13.200
 this is not you can use

159
00:08:13.200 --> 00:08:16.200
 it but is a good practice to use

160
00:08:16.200 --> 00:08:18.100
 the V option?

161
00:08:20.200 --> 00:08:23.500
To get more information about all the connection that

162
00:08:23.500 --> 00:08:24.100
 we are going.

163
00:08:25.200 --> 00:08:25.300
to do

164
00:08:31.700 --> 00:08:35.800
another option here is using the the option

165
00:08:35.800 --> 00:08:36.200
 k

166
00:08:37.100 --> 00:08:40.700
Okay, that's mean that is the server is ready

167
00:08:40.700 --> 00:08:45.100
 to receive another connections

168
00:08:44.100 --> 00:08:46.900
 from other clients. For example.

169
00:08:48.600 --> 00:08:51.600
For example you we use we start

170
00:08:51.600 --> 00:08:53.200
 the server like this.

171
00:08:55.300 --> 00:08:57.800
the localhost in the part 1 2 3 4 5

172
00:08:58.900 --> 00:09:02.000
and we use we connect in

173
00:09:01.200 --> 00:09:02.300
 a client.

174
00:09:03.300 --> 00:09:06.300
Or localhost one, two, three, four,

175
00:09:06.300 --> 00:09:09.300
 five two. So we have a connections then.

176
00:09:13.300 --> 00:09:15.200
here, but if a client

177
00:09:16.400 --> 00:09:17.200
present disconnect

178
00:09:19.100 --> 00:09:19.600
like this

179
00:09:21.300 --> 00:09:22.400
the server

180
00:09:23.300 --> 00:09:26.200
disconnect and the server is not it's not able

181
00:09:26.200 --> 00:09:29.800
 to to receive another connection or for

182
00:09:29.800 --> 00:09:33.200
 a different client or for same

183
00:09:32.200 --> 00:09:33.500
 client.

184
00:09:34.500 --> 00:09:38.900
So an option that we can use for the server is the dash

185
00:09:37.900 --> 00:09:39.500
 k?

186
00:09:40.900 --> 00:09:43.400
Another reminder. Another reminder is that we can

187
00:09:43.400 --> 00:09:44.400
 use

188
00:09:45.800 --> 00:09:48.400
like this in separate mode or we

189
00:09:48.400 --> 00:09:49.700
 can add.

190
00:09:50.600 --> 00:09:51.400
all together

191
00:09:52.700 --> 00:09:53.500
and use

192
00:09:54.500 --> 00:09:55.800
the options like this.

193
00:09:56.800 --> 00:09:59.400
So I'm using the option K. That's mean

194
00:09:59.400 --> 00:10:02.100
 that the net getting a server mode is able to

195
00:10:02.100 --> 00:10:05.300
 reopen another another connections.

196
00:10:06.200 --> 00:10:10.000
And we used you use option.

197
00:10:10.900 --> 00:10:13.200
To connect in the server the

198
00:10:13.200 --> 00:10:16.700
 the client here is connected with server the client

199
00:10:16.700 --> 00:10:19.800
 can out the connection, but

200
00:10:19.800 --> 00:10:21.200
 the server is still on.

201
00:10:22.500 --> 00:10:24.100
so this is a good option to

202
00:10:25.100 --> 00:10:29.100
to use a netcat in the server mode hours

203
00:10:28.100 --> 00:10:31.800
 open for new connections. So

204
00:10:31.800 --> 00:10:34.400
 the server is already open here.

205
00:10:34.400 --> 00:10:37.400
 We can connect with this client.

206
00:10:38.600 --> 00:10:42.800
And from this another terminal comment

207
00:10:42.800 --> 00:10:43.100
 shell.

208
00:10:44.500 --> 00:10:48.000
We we will connect again. So

209
00:10:47.800 --> 00:10:51.100
 Dash V2 to get the information step

210
00:10:50.100 --> 00:10:53.900
 by step localhost and the

211
00:10:53.900 --> 00:10:56.200
 part one, two, three, four five. Let's mean

212
00:10:56.200 --> 00:10:57.600
 that this client here.

213
00:10:58.400 --> 00:11:01.100
We connect netcat and we can verify here.

214
00:11:02.300 --> 00:11:05.400
First we have this client in this in this ball

215
00:11:05.400 --> 00:11:06.300
 in this board.

216
00:11:07.200 --> 00:11:10.600
And then we have another client in this port. Let's mean

217
00:11:10.600 --> 00:11:13.800
 that the server is available at this

218
00:11:13.800 --> 00:11:14.200
 point here.

219
00:11:15.100 --> 00:11:15.300
and

220
00:11:16.300 --> 00:11:19.600
for connection the first client we connect

221
00:11:20.800 --> 00:11:23.000
from a another port

222
00:11:24.100 --> 00:11:27.400
and another client we connect from another Port so

223
00:11:27.400 --> 00:11:30.900
 service say to us that we have a new connection from

224
00:11:30.900 --> 00:11:33.700
 this port. Yeah another connection from

225
00:11:33.700 --> 00:11:36.400
 this port. So the client one is

226
00:11:36.400 --> 00:11:38.800
 able to exchange messenger, for example

227
00:11:39.600 --> 00:11:41.700
being client one

228
00:11:44.300 --> 00:11:47.400
in receive the message from the

229
00:11:47.400 --> 00:11:48.100
 front client one.

230
00:11:49.200 --> 00:11:52.200
And the client should do the same thing client.

231
00:11:53.300 --> 00:11:53.500
you

232
00:11:55.900 --> 00:11:56.100
so

233
00:11:57.500 --> 00:12:00.900
what we have here is a server is in

234
00:12:00.900 --> 00:12:03.700
 is able to receive any connections

235
00:12:03.700 --> 00:12:04.600
 from any client.

236
00:12:08.200 --> 00:12:11.400
another powerful option that we can use here

237
00:12:11.400 --> 00:12:13.900
 in that cat is - e

238
00:12:15.300 --> 00:12:18.200
That means that net gets allowed to execute a specific

239
00:12:18.200 --> 00:12:21.100
 problem when a client connects to it.

240
00:12:22.300 --> 00:12:25.300
So we start netcat in a server mode.

241
00:12:25.300 --> 00:12:27.500
 Netcad - V.

242
00:12:28.100 --> 00:12:28.500
l

243
00:12:29.400 --> 00:12:29.900
listen

244
00:12:32.600 --> 00:12:33.200
and P

245
00:12:34.400 --> 00:12:37.500
and we study specify a port one, two,

246
00:12:37.500 --> 00:12:40.500
 three, four five and we're gonna use the old dish

247
00:12:40.500 --> 00:12:41.000
 e

248
00:12:41.700 --> 00:12:45.200
and press executed program

249
00:12:44.200 --> 00:12:47.600
 specific program. So we gonna

250
00:12:47.600 --> 00:12:48.900
 use CMD or

251
00:12:50.300 --> 00:12:53.700
for verify this option to execute

252
00:12:54.300 --> 00:12:57.000
remote terminal

253
00:12:57.600 --> 00:13:00.400
when the client connect the server

254
00:13:00.900 --> 00:13:02.700
so the server will start.

255
00:13:03.700 --> 00:13:04.500
with this option

256
00:13:05.900 --> 00:13:08.900
and the client will connect this server.

257
00:13:09.700 --> 00:13:10.800
When there's V?

258
00:13:14.900 --> 00:13:15.800
Local Host

259
00:13:17.200 --> 00:13:20.100
And the port one two, three, four five.

260
00:13:22.400 --> 00:13:24.800
So look the connection is done.

261
00:13:25.700 --> 00:13:28.000
So here the client say that.

262
00:13:28.600 --> 00:13:30.000
The decline is connected.

263
00:13:30.700 --> 00:13:31.500
the server

264
00:13:33.500 --> 00:13:37.400
shows that connection is done. The

265
00:13:36.400 --> 00:13:40.400
 connection is already ready to

266
00:13:40.400 --> 00:13:40.900
 use.

267
00:13:41.700 --> 00:13:44.000
And when the connection is, okay.

268
00:13:45.100 --> 00:13:49.000
The server will execute these specific program.

269
00:13:48.900 --> 00:13:50.800
 So CMD.

270
00:13:51.700 --> 00:13:54.800
And now in the connection from

271
00:13:54.800 --> 00:13:57.700
 the the client here, we can

272
00:13:57.700 --> 00:14:01.400
 verify a header when

273
00:14:00.400 --> 00:14:03.600
 we start a command in Windows.

274
00:14:03.600 --> 00:14:07.200
 We have a new new window when they

275
00:14:06.200 --> 00:14:11.100
 had saying the Microsoft Corporation. All

276
00:14:09.100 --> 00:14:12.500
 right. All right reserve it

277
00:14:12.500 --> 00:14:14.200
 and we have a prompt.

278
00:14:15.600 --> 00:14:18.800
That means that the connection is

279
00:14:18.800 --> 00:14:18.900
 done.

280
00:14:20.100 --> 00:14:20.900
and the

281
00:14:22.100 --> 00:14:25.600
the run the program is already

282
00:14:25.600 --> 00:14:28.600
 executing and this moment the

283
00:14:28.600 --> 00:14:29.400
 command was

284
00:14:30.400 --> 00:14:34.200
The Prompt let's mean that our reverse shell

285
00:14:34.200 --> 00:14:37.100
 is is ready to be used so I

286
00:14:37.100 --> 00:14:38.300
 have this connection

287
00:14:40.200 --> 00:14:41.400
Ready to be used.

288
00:14:42.200 --> 00:14:46.800
And this is very this is very very powerful because I

289
00:14:45.800 --> 00:14:49.000
 don't have to use any user

290
00:14:48.700 --> 00:14:51.400
 identification or authentication to

291
00:14:51.400 --> 00:14:54.200
 start a remote session with the server.

292
00:14:54.700 --> 00:14:54.900
So

293
00:14:56.300 --> 00:14:59.800
As you can see I have the connection the connection

294
00:14:59.800 --> 00:15:01.400
 from from one remote.

295
00:15:03.800 --> 00:15:06.800
And I can do any operation and get

296
00:15:06.800 --> 00:15:08.900
 in result with a client.

297
00:15:11.400 --> 00:15:13.900
For example, let me start here again.

298
00:15:15.400 --> 00:15:18.600
And the servant I will create a new

299
00:15:18.600 --> 00:15:19.300
 folder.

300
00:15:20.100 --> 00:15:21.100
So we'll be 10.

301
00:15:22.300 --> 00:15:22.800
and get

302
00:15:23.900 --> 00:15:24.400
the

303
00:15:25.600 --> 00:15:26.200
U1

304
00:15:27.300 --> 00:15:28.600
I will enter in this.

305
00:15:29.500 --> 00:15:31.400
folder and get

306
00:15:33.700 --> 00:15:34.500
P1

307
00:15:37.700 --> 00:15:40.800
and you create a file. So

308
00:15:40.800 --> 00:15:43.600
 here that text for

309
00:15:43.600 --> 00:15:45.800
 example my file it's here.

310
00:15:48.100 --> 00:15:51.300
and I start a new server

311
00:15:51.300 --> 00:15:52.400
 here and get

312
00:15:53.700 --> 00:15:54.700
the L

313
00:15:56.100 --> 00:15:58.500
b 1 2 3 4 5

314
00:15:59.800 --> 00:16:02.500
passing and and using the

315
00:16:02.500 --> 00:16:03.600
 dash e

316
00:16:04.700 --> 00:16:06.900
and specify a prompt.

317
00:16:08.200 --> 00:16:12.300
So the service are in several is ready. They might

318
00:16:11.300 --> 00:16:13.100
 my client.

319
00:16:13.800 --> 00:16:15.900
will connect This Server the

320
00:16:17.100 --> 00:16:20.100
Local Host one two three, four five

321
00:16:23.600 --> 00:16:25.900
and look the connection is done.

322
00:16:27.100 --> 00:16:30.700
The problem same the is executed now.

323
00:16:31.300 --> 00:16:34.500
And the prompt is running. This is like my

324
00:16:34.500 --> 00:16:38.100
 welcome messenger from the command and

325
00:16:37.100 --> 00:16:40.400
 I start the server in

326
00:16:40.400 --> 00:16:41.500
 this folder paint.

327
00:16:42.100 --> 00:16:46.000
And I have a direct connection from this folder

328
00:16:45.400 --> 00:16:48.800
 here so I can use the to

329
00:16:48.800 --> 00:16:51.500
 get the the list of

330
00:16:51.500 --> 00:16:51.800
 file.

331
00:16:53.300 --> 00:16:56.900
And two things here. I have already a connection.

332
00:16:58.800 --> 00:17:01.400
To the server running a remote.

333
00:17:02.300 --> 00:17:06.400
Show our remote prompt and a

334
00:17:05.400 --> 00:17:08.700
 link direct for the folder. That server is

335
00:17:08.700 --> 00:17:09.000
 running.

336
00:17:09.600 --> 00:17:12.500
So this is a powerful operation. We're gonna

337
00:17:12.500 --> 00:17:15.600
 see in the future more details about these reverse

338
00:17:15.600 --> 00:17:15.800
 shell.

339
00:17:17.900 --> 00:17:21.500
But is a very very powerful option

340
00:17:20.500 --> 00:17:23.100
 that we have here in netcat.

341
00:17:28.900 --> 00:17:32.200
Another option that we can use is -

342
00:17:32.200 --> 00:17:32.500
 oh

343
00:17:33.300 --> 00:17:34.200
with this option

344
00:17:36.400 --> 00:17:39.600
create a file that represent a log for all

345
00:17:39.600 --> 00:17:40.700
 the information.

346
00:17:41.700 --> 00:17:45.100
During the connection so all

347
00:17:44.100 --> 00:17:48.000
 the data that was exchanged from

348
00:17:47.300 --> 00:17:49.700
 the client and the server.

349
00:17:50.400 --> 00:17:53.500
We can kept this information and put

350
00:17:53.500 --> 00:17:54.300
 in a file.

351
00:17:55.900 --> 00:17:58.500
So for this option we use start.

352
00:17:59.200 --> 00:18:02.100
A new netcat server mode.

353
00:18:02.100 --> 00:18:05.300
 So we LP in the

354
00:18:05.300 --> 00:18:07.800
 server in the port one, two, three, four five.

355
00:18:08.500 --> 00:18:11.100
and now the option Dash o

356
00:18:11.800 --> 00:18:14.800
and we will specify a file

357
00:18:14.800 --> 00:18:17.100
 like dump dot X.

358
00:18:17.900 --> 00:18:20.100
Okay, the server is listen.

359
00:18:21.500 --> 00:18:21.900
here

360
00:18:24.100 --> 00:18:27.500
I will create a connection a client

361
00:18:27.500 --> 00:18:28.200
 connection. So

362
00:18:29.300 --> 00:18:30.900
be localhost.

363
00:18:32.500 --> 00:18:34.600
In the port one, two, three, four five.

364
00:18:35.600 --> 00:18:38.400
So, okay this connection is done. So

365
00:18:38.400 --> 00:18:39.100
 I use.

366
00:18:40.400 --> 00:18:42.000
Hello server.

367
00:18:43.100 --> 00:18:46.600
The server you response in Renault client.

368
00:18:50.300 --> 00:18:54.500
I'm looking for another message here. It's being serve instrument

369
00:18:54.500 --> 00:18:55.200
 pong.

370
00:18:56.200 --> 00:18:58.000
and okay the connection

371
00:18:59.400 --> 00:19:00.200
is okay.

372
00:19:01.200 --> 00:19:04.300
We're gonna see that we have a file here dump dot

373
00:19:04.300 --> 00:19:04.500
 X.

374
00:19:06.500 --> 00:19:10.100
So we you get the information from this.

375
00:19:11.400 --> 00:19:12.500
So we will type.

376
00:19:14.100 --> 00:19:15.100
number X

377
00:19:16.200 --> 00:19:17.600
and we see the text.

378
00:19:18.400 --> 00:19:21.500
Information here login all the

379
00:19:21.500 --> 00:19:24.900
 operation that we have done during the exchange

380
00:19:24.900 --> 00:19:27.300
 data between the server and the

381
00:19:27.300 --> 00:19:27.800
 client.

382
00:19:35.300 --> 00:19:39.000
Now we're going to use a Linux environment and

383
00:19:38.500 --> 00:19:41.100
 you you use at the full

384
00:19:41.100 --> 00:19:44.100
 version started in a Linux environment. Let's mean

385
00:19:44.100 --> 00:19:48.100
 the netcat for window project. So we used

386
00:19:47.100 --> 00:19:50.100
 this the a few.

387
00:19:50.600 --> 00:19:53.600
options that that we have used in Windows

388
00:19:53.600 --> 00:19:53.800
 environment

389
00:19:54.600 --> 00:19:57.000
Some options is specific.

390
00:19:57.900 --> 00:20:00.600
for Linux environment for this

391
00:20:00.600 --> 00:20:02.500
 version Gino version

392
00:20:03.200 --> 00:20:03.800
brunette

393
00:20:04.600 --> 00:20:07.300
And now let's see some some option here.

394
00:20:07.300 --> 00:20:11.000
 First of all, we will check the version of netcat.

395
00:20:10.500 --> 00:20:13.900
 So yeah, as I

396
00:20:13.900 --> 00:20:16.700
 said before in the last video is the

397
00:20:16.700 --> 00:20:20.500
 is the same problem netcat but the

398
00:20:20.500 --> 00:20:23.100
 different version and is another only yes.

399
00:20:23.100 --> 00:20:26.500
 So NC for netcat so first, let's

400
00:20:26.500 --> 00:20:29.700
 see - H to check

401
00:20:29.700 --> 00:20:33.200
 the the version and some

402
00:20:32.200 --> 00:20:35.800
 options that we have looked at.

403
00:20:35.800 --> 00:20:38.700
 We have less version less

404
00:20:38.700 --> 00:20:41.800
 options than other version but it's

405
00:20:41.800 --> 00:20:44.200
 a powerful tool and we're gonna

406
00:20:44.200 --> 00:20:48.100
 see a lot of information a lot of powerful options and

407
00:20:47.100 --> 00:20:50.600
 operations that we can use using this

408
00:20:50.600 --> 00:20:50.800
 tool.

409
00:20:51.300 --> 00:20:55.000
So let me clear here. And first

410
00:20:54.200 --> 00:20:57.700
 of all, let's talk about

411
00:20:57.700 --> 00:21:00.800
 the dash are that's mean

412
00:21:00.800 --> 00:21:03.800
 that the option to randomize Sports. So

413
00:21:03.800 --> 00:21:06.500
 in a safe mode, we'll start a netcad.

414
00:21:07.200 --> 00:21:08.800
in the option

415
00:21:09.700 --> 00:21:12.200
vlr that's me. There is

416
00:21:12.200 --> 00:21:16.500
 a very Bose a mode and for

417
00:21:15.500 --> 00:21:18.900
 listen in R to

418
00:21:18.900 --> 00:21:21.400
 randomize and check that now the

419
00:21:22.300 --> 00:21:25.100
server is open is listen.

420
00:21:26.200 --> 00:21:29.400
In the port three four three seven.

421
00:21:30.700 --> 00:21:34.700
Let cancer here I will do again and verify

422
00:21:33.700 --> 00:21:35.500
 and you can check that.

423
00:21:36.500 --> 00:21:39.900
Every time that I use these common I

424
00:21:39.900 --> 00:21:42.700
 get a different port here so I

425
00:21:42.700 --> 00:21:46.100
 can specify it's possible to specify a

426
00:21:45.100 --> 00:21:49.300
 port one two, three, four five. Okay, but

427
00:21:48.300 --> 00:21:50.000
 I can

428
00:21:51.700 --> 00:21:53.500
use the option to randomize this.

429
00:21:55.100 --> 00:21:55.300
Okay.

430
00:22:00.700 --> 00:22:02.500
Another interesting option here.

431
00:22:03.500 --> 00:22:06.600
Is the the dash Wu that's mean

432
00:22:06.600 --> 00:22:09.700
 that I can specify the second to set

433
00:22:09.700 --> 00:22:12.600
 a networking activity timeout. So for

434
00:22:12.600 --> 00:22:14.000
 example, I use

435
00:22:15.500 --> 00:22:16.600
w

436
00:22:17.600 --> 00:22:18.900
W3

437
00:22:20.100 --> 00:22:20.300
so

438
00:22:21.600 --> 00:22:24.900
looked at the server is open only

439
00:22:24.900 --> 00:22:28.300
 for three seconds so I can specify a

440
00:22:27.300 --> 00:22:30.400
 second this very interesting to avoid

441
00:22:30.400 --> 00:22:33.000
 any inactivity time not give the

442
00:22:33.200 --> 00:22:33.700
 time out. For example.

443
00:22:36.500 --> 00:22:37.400
so let's

444
00:22:38.500 --> 00:22:41.600
verify a connector for example here and I

445
00:22:41.600 --> 00:22:46.700
 start a client and see the localhost in

446
00:22:45.700 --> 00:22:47.100
 the port.

447
00:22:50.600 --> 00:22:53.900
Let me start here without the the option w.

448
00:22:55.800 --> 00:22:58.500
b 1 2

449
00:22:58.500 --> 00:22:59.200
 3 4 5

450
00:23:00.600 --> 00:23:02.400
a in the connection

451
00:23:03.500 --> 00:23:06.300
or the client like a host Port 1 2

452
00:23:06.300 --> 00:23:09.800
 3 4 5 so the connection is already done.

453
00:23:12.900 --> 00:23:15.600
Another option here is Dash o

454
00:23:15.600 --> 00:23:18.200
 we have a seen these options

455
00:23:18.200 --> 00:23:19.700
 from Microsoft environment.

456
00:23:20.500 --> 00:23:23.500
But in Linux environment is a little

457
00:23:23.500 --> 00:23:26.300
 bit different we can have this

458
00:23:26.300 --> 00:23:29.600
 file in The Exodus my information and text.

459
00:23:29.600 --> 00:23:30.600
 So for example

460
00:23:32.300 --> 00:23:36.200
Let me let me start a server with

461
00:23:35.200 --> 00:23:36.900
 the option Dash.

462
00:23:37.800 --> 00:23:38.200
home

463
00:23:39.900 --> 00:23:43.100
and I have to specify on file name.

464
00:23:42.100 --> 00:23:44.500
 So don't X.

465
00:23:45.700 --> 00:23:48.300
So, okay. The server is already is ready.

466
00:23:48.300 --> 00:23:49.400
 All right, it's ready.

467
00:23:50.500 --> 00:23:53.300
in the client, I will

468
00:23:53.300 --> 00:23:56.900
 use client actually localhost 1 2

469
00:23:56.900 --> 00:23:58.000
 3 4 5

470
00:23:59.200 --> 00:24:02.500
great. So the connection is okay. Let me

471
00:24:02.500 --> 00:24:02.900
 say.

472
00:24:04.400 --> 00:24:05.400
Hello server.

473
00:24:06.400 --> 00:24:09.800
It's hello server. Hello client.

474
00:24:11.100 --> 00:24:14.200
So this the client will send a new

475
00:24:14.200 --> 00:24:14.500
 information.

476
00:24:16.700 --> 00:24:19.700
being the server instrument panel

477
00:24:20.400 --> 00:24:22.800
And okay, I was top the connection.

478
00:24:25.800 --> 00:24:26.000
so

479
00:24:27.900 --> 00:24:31.100
the the file is is okay.

480
00:24:30.100 --> 00:24:33.100
 He's already created. Let's take a

481
00:24:33.100 --> 00:24:35.100
 look around on this file.

482
00:24:36.900 --> 00:24:39.300
and see that information is

483
00:24:39.300 --> 00:24:42.300
 here the is a difference between

484
00:24:42.300 --> 00:24:45.500
 the Linux version and the windows

485
00:24:45.500 --> 00:24:46.900
 version then again get

486
00:24:47.500 --> 00:24:50.700
Brian map version in any cat Gino version because

487
00:24:50.700 --> 00:24:52.600
 we have the text file.

488
00:24:54.200 --> 00:24:57.500
here and we have Exodus more

489
00:24:57.500 --> 00:24:58.700
 information to

490
00:24:59.400 --> 00:25:03.200
so this is an interesting information or dump

491
00:25:02.200 --> 00:25:06.400
 or X version and you

492
00:25:05.400 --> 00:25:07.700
 can use for a lot of things.

493
00:25:11.700 --> 00:25:14.500
So let's start interesting operation here.

494
00:25:16.200 --> 00:25:19.200
Now we have two environments different environments here. We have

495
00:25:19.200 --> 00:25:20.600
 Microsoft environment.

496
00:25:21.600 --> 00:25:23.900
and Linux environment

497
00:25:25.300 --> 00:25:25.500
so

498
00:25:27.900 --> 00:25:30.300
let's verify we have a connection between

499
00:25:30.300 --> 00:25:33.600
 these two environments. So let me verify my

500
00:25:36.300 --> 00:25:39.400
My IP so might be

501
00:25:39.400 --> 00:25:42.200
 this one here my IP number.

502
00:25:42.200 --> 00:25:43.500
 I have my IP address.

503
00:25:44.400 --> 00:25:47.800
Okay, and how you start a

504
00:25:47.800 --> 00:25:50.700
 server in the Microsoft environment from any

505
00:25:50.700 --> 00:25:52.800
 cat? So any cat we listen?

506
00:25:53.900 --> 00:25:56.400
At P 1 2

507
00:25:56.400 --> 00:25:59.600
 3 4 5 and are you use the

508
00:25:59.600 --> 00:26:01.100
 dash e?

509
00:26:01.700 --> 00:26:03.100
to start a remote

510
00:26:04.300 --> 00:26:07.500
start to start a terminal here. So

511
00:26:07.500 --> 00:26:11.300
 okay the server is okay from this

512
00:26:11.300 --> 00:26:15.100
 is listening and local here localhost here

513
00:26:14.100 --> 00:26:17.100
 using this port.

514
00:26:18.100 --> 00:26:20.200
If any client connecting the server.

515
00:26:21.500 --> 00:26:25.000
The server the server will start this program

516
00:26:24.300 --> 00:26:27.500
 here could be any problem. Okay, it

517
00:26:27.500 --> 00:26:29.500
 could be not bad program. For example.

518
00:26:31.600 --> 00:26:33.900
or Explorer software

519
00:26:34.700 --> 00:26:39.000
But we this example here. We you start

520
00:26:37.400 --> 00:26:40.900
 a command here.

521
00:26:40.900 --> 00:26:43.300
 So in the mement the the

522
00:26:43.300 --> 00:26:46.800
 Linux environment here, we start

523
00:26:46.800 --> 00:26:50.100
 this connection. So the

524
00:26:49.100 --> 00:26:52.300
 server is already already. Okay.

525
00:26:53.200 --> 00:26:53.400
and

526
00:26:55.200 --> 00:26:58.100
Let's start here. So I will create.

527
00:26:58.800 --> 00:27:02.200
Uh, netcat here, okay.

528
00:27:03.100 --> 00:27:05.100
using a v

529
00:27:08.200 --> 00:27:12.400
for Vivo variables. I will specify the

530
00:27:11.400 --> 00:27:14.400
 IP address that I want

531
00:27:14.400 --> 00:27:17.500
 to connect. So the server is in this IP here.

532
00:27:19.100 --> 00:27:19.400
or

533
00:27:20.700 --> 00:27:23.200
using this port 1 2 3 4

534
00:27:23.200 --> 00:27:23.400
 5

535
00:27:30.700 --> 00:27:30.900
so

536
00:27:32.200 --> 00:27:33.700
the connection is okay.

537
00:27:35.400 --> 00:27:38.500
The server can guarantees years the connection from

538
00:27:38.500 --> 00:27:39.000
 this.

539
00:27:39.900 --> 00:27:40.300
for

540
00:27:42.100 --> 00:27:46.300
this IP is my localhost here. And

541
00:27:45.300 --> 00:27:48.400
 you see this port so is the the

542
00:27:48.400 --> 00:27:51.200
 part use it by the client to connect with the

543
00:27:51.200 --> 00:27:52.600
 server and look.

544
00:27:53.900 --> 00:27:56.600
I specify the common here

545
00:27:56.600 --> 00:27:59.300
 to be executed. And now I

546
00:27:59.300 --> 00:28:03.000
 have a connection reverse

547
00:28:02.400 --> 00:28:05.900
 prox prompt share common

548
00:28:05.900 --> 00:28:07.700
 here available in Windows.

549
00:28:08.600 --> 00:28:10.200
So that's mean that I have.

550
00:28:11.200 --> 00:28:12.400
the link

551
00:28:13.400 --> 00:28:15.200
from Linux terminal

552
00:28:16.200 --> 00:28:20.600
to Microsoft command. So with this

553
00:28:20.600 --> 00:28:24.100
 option here I can have access to any

554
00:28:23.100 --> 00:28:27.000
 information from this machine. We're gonna

555
00:28:26.400 --> 00:28:30.000
 see this example more detail

556
00:28:29.100 --> 00:28:32.100
 in the next chapters name in the

557
00:28:32.100 --> 00:28:33.400
 next videos in this course.

558
00:28:34.200 --> 00:28:38.100
But this is a simple example showing that the connection

559
00:28:37.100 --> 00:28:39.500
 was done.

560
00:28:40.400 --> 00:28:42.400
and this connection was done without

561
00:28:43.700 --> 00:28:47.000
the user provide any using the

562
00:28:46.300 --> 00:28:49.700
 identification or authentication. So this

563
00:28:49.700 --> 00:28:51.000
 is this is very powerful.

564
00:28:56.500 --> 00:28:59.900
And now we explore another option

565
00:28:59.900 --> 00:29:01.500
 is - Z.

566
00:29:02.200 --> 00:29:03.900
That's easy is use it.

567
00:29:05.600 --> 00:29:06.600
for for scanning

568
00:29:08.900 --> 00:29:09.900
some ports

569
00:29:10.400 --> 00:29:13.700
and to get the status of the sport if

570
00:29:13.700 --> 00:29:16.300
 the sport is open or not.

571
00:29:18.200 --> 00:29:21.700
So this connection we will see more details information

572
00:29:21.700 --> 00:29:24.900
 about this option the the future this

573
00:29:24.900 --> 00:29:25.400
 course.

574
00:29:26.600 --> 00:29:30.200
But the Z option the netcat

575
00:29:29.200 --> 00:29:32.900
 you start to verify some ports

576
00:29:32.900 --> 00:29:36.500
 using a three-way handshake

577
00:29:36.500 --> 00:29:40.300
 TCP. We're gonna see the the TCP

578
00:29:39.300 --> 00:29:42.400
 protocol more in details in the

579
00:29:42.400 --> 00:29:43.400
 next in the next videos.

580
00:29:44.200 --> 00:29:45.500
and India next sections

581
00:29:46.700 --> 00:29:49.500
But at this moment I can say that the the

582
00:29:49.500 --> 00:29:53.600
 Z option the scanning using here. We

583
00:29:52.600 --> 00:29:56.200
 will use TCP through

584
00:29:55.200 --> 00:29:58.600
 handshake on its verify if the port is

585
00:29:58.600 --> 00:29:59.900
 open or not.

586
00:30:00.900 --> 00:30:03.800
So in the windows environment, we use

587
00:30:03.800 --> 00:30:06.500
 the windows environment. So

588
00:30:06.500 --> 00:30:09.700
 when they use it you Windows environment will start.

589
00:30:11.200 --> 00:30:14.600
server, so B listen

590
00:30:15.900 --> 00:30:19.600
in the door in the port 880. Okay,

591
00:30:18.600 --> 00:30:21.300
 so the server is

592
00:30:21.300 --> 00:30:22.700
 okay listening.

593
00:30:23.800 --> 00:30:26.400
and in the Linux environment

594
00:30:27.600 --> 00:30:28.400
you start

595
00:30:29.100 --> 00:30:33.000
as a client and see or

596
00:30:34.500 --> 00:30:34.900
V

597
00:30:36.700 --> 00:30:38.200
for variable City

598
00:30:39.200 --> 00:30:43.200
We will use the Wu to

599
00:30:42.200 --> 00:30:45.700
 get to use the timeout

600
00:30:45.700 --> 00:30:49.000
 to because we will use a range

601
00:30:48.500 --> 00:30:52.900
 ports. So it's important to choose

602
00:30:51.900 --> 00:30:54.600
 specify a limit time

603
00:30:54.600 --> 00:30:55.600
 to to.

604
00:30:56.900 --> 00:30:59.100
you verify each port

605
00:31:00.200 --> 00:31:03.500
And the Z option I know that my server

606
00:31:03.500 --> 00:31:04.500
 is in this.

607
00:31:05.400 --> 00:31:07.900
Part here in this IP address here.

608
00:31:09.400 --> 00:31:12.400
And I I will use a range

609
00:31:12.400 --> 00:31:16.900
 of ports to to verify

610
00:31:15.900 --> 00:31:18.500
 if any port is open.

611
00:31:18.500 --> 00:31:21.900
 So I have this there is a port in

612
00:31:21.900 --> 00:31:23.900
 this IP address. There is a port.

613
00:31:24.800 --> 00:31:28.200
80 18, so let me start doing

614
00:31:27.200 --> 00:31:28.400
 the

615
00:31:29.200 --> 00:31:30.100
with a range

616
00:31:31.900 --> 00:31:34.000
for example 8075

617
00:31:35.300 --> 00:31:35.600
to

618
00:31:36.900 --> 00:31:38.400
80 85

619
00:31:40.600 --> 00:31:43.500
so they can't get up Sports and go down.

620
00:31:44.100 --> 00:31:46.800
Okay, so, let's see. What happened here.

621
00:31:48.300 --> 00:31:49.300
okay the connection

622
00:31:51.500 --> 00:31:52.400
Connection is done.

623
00:31:54.300 --> 00:31:55.100
straight connect

624
00:31:55.800 --> 00:31:59.700
I forget I'm not information here for the option

625
00:31:59.700 --> 00:32:00.200
 in.

626
00:32:00.900 --> 00:32:01.800
the option in

627
00:32:02.500 --> 00:32:06.400
say do not get you use the IP addresses.

628
00:32:07.400 --> 00:32:10.900
Okay, so, okay the server

629
00:32:10.900 --> 00:32:11.200
 is okay.

630
00:32:12.300 --> 00:32:13.300
Let's verify.

631
00:32:16.500 --> 00:32:16.700
so

632
00:32:26.000 --> 00:32:26.200
Okay.

633
00:32:27.400 --> 00:32:30.500
we see that there's a open door for

634
00:32:30.500 --> 00:32:33.800
 the door 80 here 8080 so

635
00:32:35.400 --> 00:32:38.100
With this option here was we are we was able to

636
00:32:38.100 --> 00:32:39.200
 see that netcat.

637
00:32:39.900 --> 00:32:41.000
Start I scan.

638
00:32:41.900 --> 00:32:44.600
And he catch the open

639
00:32:44.600 --> 00:32:47.000
 door here or the eight eight.

640
00:32:47.700 --> 00:32:50.200
And He suggests for

641
00:32:50.200 --> 00:32:51.500
 http.

642
00:32:52.500 --> 00:32:54.000
Alt here.

643
00:32:55.600 --> 00:32:55.800
Okay.

644
00:32:56.800 --> 00:33:00.200
Netcat will tell you the service associate

645
00:32:59.200 --> 00:33:02.700
 within a specific Port so.

646
00:33:04.400 --> 00:33:07.200
In the Linux environment and also in

647
00:33:07.200 --> 00:33:10.600
 the wind Microsoft Windows environment. We have a file with

648
00:33:10.600 --> 00:33:13.100
 some specifics ports.

649
00:33:14.400 --> 00:33:16.700
and the name of this port

650
00:33:17.800 --> 00:33:20.300
Some Alias Alliance for this part

651
00:33:20.300 --> 00:33:23.600
 for example, for example in the wind in Linux

652
00:33:23.600 --> 00:33:24.000
 environment.

653
00:33:24.900 --> 00:33:26.000
We have this file.

654
00:33:26.700 --> 00:33:27.000
in the

655
00:33:29.200 --> 00:33:32.500
here, so, let me let let verify the

656
00:33:33.500 --> 00:33:36.200
report so it ITC services

657
00:33:38.900 --> 00:33:41.700
here so you can verify that the long

658
00:33:41.700 --> 00:33:42.900
 list of parts.

659
00:33:44.700 --> 00:33:48.000
And the information for for port for

660
00:33:47.100 --> 00:33:50.700
 example, if any part if the

661
00:33:50.700 --> 00:33:52.700
 sport here is running.

662
00:33:53.600 --> 00:33:57.100
Uh could be my C

663
00:33:56.100 --> 00:33:59.300
 code server. For example, or this one

664
00:33:59.300 --> 00:34:03.800
 here is for the the Venus

665
00:34:03.800 --> 00:34:07.300
 S A from a for example, so let

666
00:34:06.300 --> 00:34:09.700
 me let the bird let let

667
00:34:09.700 --> 00:34:10.700
 improve.

668
00:34:14.400 --> 00:34:15.500
Let me prove this.

669
00:34:16.700 --> 00:34:17.500
So I will.

670
00:34:18.500 --> 00:34:19.700
I use the option.

671
00:34:21.000 --> 00:34:21.500
here

672
00:34:23.200 --> 00:34:26.300
and I will get a TC, but

673
00:34:26.300 --> 00:34:28.300
 I will use pipe.

674
00:34:28.900 --> 00:34:29.600
grip

675
00:34:30.800 --> 00:34:31.800
880

676
00:34:32.700 --> 00:34:33.100
So look.

677
00:34:33.900 --> 00:34:36.300
This was the option that netcat showed to

678
00:34:36.300 --> 00:34:38.700
 us because for this port here.

679
00:34:40.900 --> 00:34:44.700
We have Services map for

680
00:34:43.700 --> 00:34:44.900
 this.

681
00:34:45.600 --> 00:34:49.100
Is protocol here HTTP?

682
00:34:48.100 --> 00:34:51.100
 So this mean that we have a

683
00:34:51.100 --> 00:34:54.500
 file in the services file a to

684
00:34:54.500 --> 00:34:57.300
 specify to bind and to map

685
00:34:57.300 --> 00:35:00.900
 for each server to each part.

686
00:35:02.800 --> 00:35:05.600
In this video we saw different options

687
00:35:05.600 --> 00:35:07.700
 available in Microsoft Windows.

688
00:35:08.400 --> 00:35:11.600
And Linux environments and finally we saw

689
00:35:11.600 --> 00:35:14.300
 some samples and practices and

690
00:35:14.300 --> 00:35:15.600
 with some combinations.

691
00:35:16.900 --> 00:35:19.800
We will take a look at some base cooperations available

692
00:35:19.800 --> 00:35:22.100
 in netcat. I hope to see you there.
