WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.900 --> 00:00:07.500
Hello everyone in this

1
00:00:07.500 --> 00:00:11.200
 video. We are going to learn about IMAP capabilities

2
00:00:10.200 --> 00:00:12.600
 using nmap.

3
00:00:13.600 --> 00:00:17.400
So what is IMAP IMAP stands for internet message

4
00:00:16.400 --> 00:00:19.400
 access protocol which is

5
00:00:19.400 --> 00:00:23.100
 one of the protocol which is used for receiving

6
00:00:22.100 --> 00:00:24.400
 of emails.

7
00:00:25.300 --> 00:00:28.600
We have also seen a protocol which is used for receiving of

8
00:00:28.600 --> 00:00:30.500
 emails, which is POP3.

9
00:00:32.600 --> 00:00:35.700
IMAP works on the port number 1 4

10
00:00:35.700 --> 00:00:36.200
 3

11
00:00:37.600 --> 00:00:40.600
Sometimes it's also works over SSL on

12
00:00:40.600 --> 00:00:43.400
 different port number which is 445.

13
00:00:44.500 --> 00:00:44.700
so

14
00:00:45.800 --> 00:00:48.800
if you discover the IMAP capabilities, then

15
00:00:48.800 --> 00:00:51.800
 you are able to identify that how

16
00:00:51.800 --> 00:00:54.600
 the IMAP is able to communicate with

17
00:00:54.600 --> 00:00:57.600
 the target web servers. Also, you

18
00:00:57.600 --> 00:01:00.700
 are able to identify the server version and

19
00:01:00.700 --> 00:01:03.400
 the IP address where the IMAP service is

20
00:01:03.400 --> 00:01:04.100
 being running.

21
00:01:05.100 --> 00:01:06.200
and installed

22
00:01:07.800 --> 00:01:10.200
you can always add The Hyphen V to

23
00:01:10.200 --> 00:01:13.300
 see the output in verbose mode and the example of

24
00:01:13.300 --> 00:01:16.200
 doing this particular scan is given over here.

25
00:01:17.900 --> 00:01:20.500
So it is the Practical time and let's see how

26
00:01:20.500 --> 00:01:23.500
 you can run this particular scan to

27
00:01:23.500 --> 00:01:26.700
 enumerate the IMAP capabilities.

28
00:01:27.800 --> 00:01:30.900
As you can see here. This is the particular command

29
00:01:30.900 --> 00:01:32.000
 that we are going to use.

30
00:01:33.200 --> 00:01:36.700
To enumerate the IMAP capabilities as you can see I have

31
00:01:36.700 --> 00:01:39.100
 run the scan already and this can

32
00:01:39.100 --> 00:01:40.800
 has been completed successfully.

33
00:01:42.000 --> 00:01:42.300
Perfect.

34
00:01:43.800 --> 00:01:46.500
If you look over here, the script that we are used

35
00:01:46.500 --> 00:01:50.000
 is IMAP capabilities to identify the

36
00:01:49.700 --> 00:01:52.800
 capabilities which are running off IMAP. This

37
00:01:52.800 --> 00:01:55.200
 is the output of the NEC script as

38
00:01:55.200 --> 00:01:58.600
 you can see login referrals capabilities ID have

39
00:01:58.600 --> 00:02:01.900
 post login listed pre-log in more authentication

40
00:02:01.900 --> 00:02:04.900
 plane triple zero one, which basically

41
00:02:04.900 --> 00:02:07.200
 means that IMAP is

42
00:02:07.200 --> 00:02:10.600
 authenticated and you have to log in to see

43
00:02:10.600 --> 00:02:11.800
 the IMAP.

44
00:02:12.500 --> 00:02:13.400
configuration

45
00:02:14.900 --> 00:02:17.600
Also, if you look at the bottom over

46
00:02:17.600 --> 00:02:20.600
 here, then we have identified the particular

47
00:02:20.600 --> 00:02:23.400
 server where the IMAP is configured for

48
00:02:23.400 --> 00:02:26.400
 is hacker udemy.com and the IP address

49
00:02:26.400 --> 00:02:29.000
 is again this loopback IB, which is

50
00:02:29.400 --> 00:02:33.100
 our computers IP address, which is our systems.

51
00:02:32.100 --> 00:02:34.600
 Loopback IP address.

52
00:02:35.900 --> 00:02:38.100
I hope you guys understood how you can

53
00:02:38.100 --> 00:02:41.800
 perform this particular scan and detect the capabilities.

54
00:02:41.800 --> 00:02:42.600
 Thank you.
