WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.800 --> 00:00:07.100
Hello everyone. So in this

1
00:00:07.100 --> 00:00:12.200
 video we are going to see how you can see nmap

2
00:00:10.200 --> 00:00:13.700
 bogus TCP UDP

3
00:00:13.700 --> 00:00:14.200
 checksums.

4
00:00:14.700 --> 00:00:17.600
So in this scan, you are basically going to

5
00:00:17.600 --> 00:00:21.100
 transmit invalid TCP UDP

6
00:00:20.100 --> 00:00:22.100
 checksums to the Target.

7
00:00:23.100 --> 00:00:26.600
And the target is basically going to respond on that

8
00:00:26.600 --> 00:00:29.400
 particular request that you are going to send through

9
00:00:29.400 --> 00:00:29.900
 and map.

10
00:00:30.800 --> 00:00:33.900
Practically every host IP stack

11
00:00:33.900 --> 00:00:36.000
 would correctly drop the packets because of the

12
00:00:36.600 --> 00:00:39.200
 bad checksum that has been added with the

13
00:00:39.200 --> 00:00:42.300
 TCP UDP request. But if we get a

14
00:00:42.300 --> 00:00:45.600
 character response, then possibly the response

15
00:00:45.600 --> 00:00:48.900
 has originated from a firewall or IDs

16
00:00:48.900 --> 00:00:51.600
 that wasn't concerned with confirming the

17
00:00:51.600 --> 00:00:52.200
 checksum.

18
00:00:54.900 --> 00:00:57.500
So, let's see how you can run this particular

19
00:00:57.500 --> 00:01:00.600
 scan and how you can identify if there

20
00:01:00.600 --> 00:01:02.800
 is a fireball enabled or not.

21
00:01:05.600 --> 00:01:09.400
I'm going to type this command which is nmap the

22
00:01:08.400 --> 00:01:11.400
 target server that I'm going to scan and the

23
00:01:11.400 --> 00:01:15.100
 four port numbers which are 21 22 23

24
00:01:14.100 --> 00:01:17.800
 and 80 with hyphen hyphen Batson

25
00:01:17.800 --> 00:01:20.300
 to send the bogus TCP UDP

26
00:01:20.300 --> 00:01:23.100
 Jackson and the output in verbose mode.

27
00:01:24.300 --> 00:01:27.500
Let us hit enter and see the output of four of

28
00:01:27.500 --> 00:01:28.200
 these ports.

29
00:01:29.400 --> 00:01:32.300
As you can see we have got the output and in

30
00:01:32.300 --> 00:01:35.600
 the output we see that all the four ports

31
00:01:35.600 --> 00:01:38.300
 are filtered which means and map is

32
00:01:38.300 --> 00:01:41.800
 not able to correct correctly identify the

33
00:01:41.800 --> 00:01:44.400
 status of the port by sending the

34
00:01:44.400 --> 00:01:45.800
 bad checksums.

35
00:01:47.300 --> 00:01:51.200
Let's do this scan again. And this time not

36
00:01:50.200 --> 00:01:53.400
 just send the bad check

37
00:01:53.400 --> 00:01:53.800
 some.

38
00:01:55.400 --> 00:01:58.500
And you can see when I hit enter we have got the correct status

39
00:01:58.500 --> 00:01:59.100
 of the port.

40
00:02:00.200 --> 00:02:03.200
Wherein we identify that Port 80 is open

41
00:02:03.200 --> 00:02:06.800
 and other ports are closed correctly The Syndicate

42
00:02:06.800 --> 00:02:09.600
 that this particular server is

43
00:02:09.600 --> 00:02:12.600
 not been installed within firewall.

44
00:02:12.600 --> 00:02:15.800
 If there was a firewall it could have responded

45
00:02:15.800 --> 00:02:18.700
 correctly for these particular

46
00:02:18.700 --> 00:02:21.000
 ports with bats some

47
00:02:22.300 --> 00:02:24.400
I hope you guys understood. Thank you.
