WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.800 --> 00:00:06.300
Hello, everyone.

1
00:00:07.200 --> 00:00:11.100
So in this video we are going to see and map bogus

2
00:00:10.100 --> 00:00:12.200
 fragment scan.

3
00:00:13.600 --> 00:00:16.200
So the syntax of doing this scan is very simple. It is

4
00:00:16.200 --> 00:00:19.900
 nmap the target IP address followed by hyphen f

5
00:00:19.900 --> 00:00:23.000
 which will send bogus or

6
00:00:22.600 --> 00:00:25.500
 less number of fragments for

7
00:00:25.500 --> 00:00:26.700
 the particular packet.

8
00:00:28.300 --> 00:00:32.200
So specifically our Command utilizes 16 bytes

9
00:00:31.200 --> 00:00:34.800
 per fragment which diminishes the

10
00:00:34.800 --> 00:00:37.500
 number of fragments when we use hyphen. F

11
00:00:37.500 --> 00:00:40.500
 fragmented packet is one of them and

12
00:00:40.500 --> 00:00:43.600
 consisting in sending several tiny packets

13
00:00:43.600 --> 00:00:46.300
 instead of one normal size of packet.

14
00:00:46.900 --> 00:00:49.700
This type of scan is useful for a

15
00:00:49.700 --> 00:00:50.900
 wearing the firewalls.

16
00:00:51.600 --> 00:00:53.200
And not getting detected.

17
00:00:54.200 --> 00:00:57.600
You can always add hyphen V to see the output inverse mode.

18
00:00:58.400 --> 00:01:01.800
The example of doing this scan is added over here. It

19
00:01:01.800 --> 00:01:04.700
 is nmap. The target IP address followed

20
00:01:04.700 --> 00:01:05.700
 by hyphen f

21
00:01:07.200 --> 00:01:10.300
so it is the Practical time and let's see how you can use

22
00:01:10.300 --> 00:01:11.900
 a fragment scan.

23
00:01:14.300 --> 00:01:18.100
To change or diminish the number of fragments into

24
00:01:17.100 --> 00:01:18.800
 the packets.

25
00:01:22.900 --> 00:01:25.500
I have this command which I'm going to run onto

26
00:01:25.500 --> 00:01:26.300
 my terminal.

27
00:01:27.200 --> 00:01:29.600
I will just paste this and I will hit enter.

28
00:01:31.300 --> 00:01:34.200
I also started Wireshark to capture the

29
00:01:34.200 --> 00:01:37.700
 request as you can see. I've identified Port 22

30
00:01:37.700 --> 00:01:40.200
 is open 1021 is closed.

31
00:01:41.200 --> 00:01:44.200
So, let's see the packet that we have captured over here

32
00:01:44.200 --> 00:01:47.700
 as you can see 22, 22 22. These

33
00:01:47.700 --> 00:01:50.400
 are the packets but in this packets if

34
00:01:50.400 --> 00:01:54.000
 we see the length of the packet

35
00:01:53.500 --> 00:01:56.700
 fragment, then the packet are

36
00:01:56.700 --> 00:01:59.700
 being sent into smaller number of chunks a

37
00:01:59.700 --> 00:02:02.400
 break broken number of chunks instead of one single

38
00:02:02.400 --> 00:02:03.000
 packet.

39
00:02:03.600 --> 00:02:07.400
If you check the packet size

40
00:02:06.400 --> 00:02:10.300
 of that particular request, then

41
00:02:09.300 --> 00:02:12.300
 you will come to know that the size

42
00:02:12.300 --> 00:02:15.800
 in the bytes have been reduced. This

43
00:02:15.800 --> 00:02:18.200
 is because we send it

44
00:02:18.200 --> 00:02:20.600
 the packet into a fragment format.

45
00:02:21.400 --> 00:02:22.500
So this way

46
00:02:23.300 --> 00:02:26.900
you can scan a particular Target by giving hyphen

47
00:02:26.900 --> 00:02:27.200
 f

48
00:02:27.900 --> 00:02:30.300
flag and doing the fragment scan

49
00:02:30.300 --> 00:02:33.600
 through which end map will send those particular

50
00:02:33.600 --> 00:02:36.400
 packets in the form of chunks.

51
00:02:37.300 --> 00:02:40.100
So I hope you guys understood how you can use this type of

52
00:02:40.100 --> 00:02:41.000
 scan.

53
00:02:41.800 --> 00:02:44.300
Remember nowadays this time of

54
00:02:44.300 --> 00:02:48.100
 scans is generally detected by firewalls because

55
00:02:47.100 --> 00:02:50.500
 they do not like if any

56
00:02:51.600 --> 00:02:55.200
Target is sending request in

57
00:02:54.200 --> 00:02:58.600
 the form of chunks or fragments what

58
00:02:57.600 --> 00:02:59.800
 you can still try running.

59
00:03:00.600 --> 00:03:03.300
This particular scan on servers, which do

60
00:03:03.300 --> 00:03:06.900
 not have latest versions or firewalls

61
00:03:06.900 --> 00:03:07.400
 implemented.

62
00:03:08.500 --> 00:03:10.900
Through which you can easily bypass the scans.

63
00:03:11.500 --> 00:03:13.300
I hope you guys understood. Thank you.
