WEBVTT - This file was automatically generated by VIMEO

0
00:00:06.900 --> 00:00:09.900
Hello everyone. So in this video we

1
00:00:09.900 --> 00:00:12.600
 are going to perform a scan in zenmap and

2
00:00:12.600 --> 00:00:14.400
 we are going to see how it looks like.

3
00:00:16.100 --> 00:00:18.700
So this is much more simpler than the CLI version.

4
00:00:19.300 --> 00:00:22.600
In the Target section, you can give the target IP address

5
00:00:22.600 --> 00:00:23.700
 that you want to scan.

6
00:00:25.200 --> 00:00:28.500
So let's say we go we are going ahead with scanning the scanme

7
00:00:28.500 --> 00:00:31.800
 dot and map.org and let's only perform a

8
00:00:31.800 --> 00:00:32.700
 pink scan from here.

9
00:00:33.900 --> 00:00:35.200
I will just click on scan.

10
00:00:36.300 --> 00:00:39.100
And you can see a simple pink scan has been

11
00:00:39.100 --> 00:00:42.600
 done and we have identified that this particular

12
00:00:42.600 --> 00:00:44.000
 host is up.

13
00:00:44.800 --> 00:00:47.300
Which means this can be done

14
00:00:47.300 --> 00:00:50.700
 nmap.org server is live and running you can

15
00:00:50.700 --> 00:00:53.800
 see there are different types of profiles which

16
00:00:53.800 --> 00:00:56.600
 are like in 10 scan intense can

17
00:00:56.600 --> 00:00:59.700
 plus UDP all TCP ports? No

18
00:00:59.700 --> 00:01:02.600
 ping, which is hyphen p n p scan

19
00:01:02.600 --> 00:01:05.200
 quick scan quick scan. Plus if you

20
00:01:05.200 --> 00:01:08.700
 want to run trace route a regular scan and a

21
00:01:08.700 --> 00:01:10.000
 slow comprehensive scan.

22
00:01:10.900 --> 00:01:13.900
So these are the default profiles that you get you can

23
00:01:13.900 --> 00:01:16.400
 edit and modify each profile according to

24
00:01:16.400 --> 00:01:19.100
 your needs or you can also make a new

25
00:01:19.100 --> 00:01:19.500
 profile.

26
00:01:21.400 --> 00:01:23.700
Alright, so we are going to use a quick scan.

27
00:01:24.700 --> 00:01:27.800
You can always see what actually happens under

28
00:01:27.800 --> 00:01:28.600
 that quick scan.

29
00:01:29.300 --> 00:01:32.100
Here is the command which is being demonstrated. As you can see

30
00:01:32.100 --> 00:01:35.300
 it is running a fast port scan on this

31
00:01:35.300 --> 00:01:38.300
 particular Target with the flag of T4.

32
00:01:41.400 --> 00:01:44.700
You can see the output the scan has been completed. We have

33
00:01:44.700 --> 00:01:48.000
 identified total 3 ports where

34
00:01:47.500 --> 00:01:50.000
 two ports are open which are denoted by

35
00:01:50.100 --> 00:01:51.500
 the color code green.

36
00:01:52.300 --> 00:01:54.500
One port is filtered which is denoted by yellow.

37
00:01:55.300 --> 00:01:58.100
And you can see it shows the hostess up.

38
00:02:00.400 --> 00:02:03.400
On the left hand side as well. You can see the services which

39
00:02:03.400 --> 00:02:07.300
 we have enumerated, which is HTTP SMTP and

40
00:02:07.300 --> 00:02:10.400
 SSH that has been found on to

41
00:02:10.400 --> 00:02:11.300
 this particular Target.

42
00:02:12.700 --> 00:02:14.300
So if I add hyphen v v

43
00:02:14.900 --> 00:02:15.500
what will happen?

44
00:02:16.500 --> 00:02:18.300
We can always run.

45
00:02:19.300 --> 00:02:22.900
The scan by modifying the command window from

46
00:02:22.900 --> 00:02:24.900
 here and you can start scanning.

47
00:02:28.500 --> 00:02:31.100
So basically you can do the CLI version

48
00:02:31.100 --> 00:02:34.800
 as well into the GUI version and you can see we have

49
00:02:34.800 --> 00:02:37.700
 got the output in verbose mode where we already identified

50
00:02:37.700 --> 00:02:40.300
 when the scan was running then map is able

51
00:02:40.300 --> 00:02:43.800
 to identify that Port 80 and 22 are

52
00:02:43.800 --> 00:02:45.500
 open as you can see over here.

53
00:02:47.400 --> 00:02:47.800
alright

54
00:02:49.200 --> 00:02:52.300
These are the services which are running and we can

55
00:02:52.300 --> 00:02:54.400
 see SMTP is filtered.

56
00:02:54.900 --> 00:02:57.100
HTTP and SSH are found to

57
00:02:57.100 --> 00:02:57.600
 be open.

58
00:03:01.500 --> 00:03:04.300
If you go into Services, you can see with services are

59
00:03:04.300 --> 00:03:07.300
 running onto that particular Port we have already identified the

60
00:03:07.300 --> 00:03:10.900
 services now, we will go into the port slash host

61
00:03:10.900 --> 00:03:13.400
 wherein for this particular host the

62
00:03:13.400 --> 00:03:16.600
 ports that are open and closed will be demonstrated

63
00:03:16.600 --> 00:03:17.100
 over here.

64
00:03:18.400 --> 00:03:21.300
The next one is the topology in the topology View.

65
00:03:23.100 --> 00:03:26.100
It will show you that this particular Target that you

66
00:03:26.100 --> 00:03:26.800
 have scanned.

67
00:03:27.900 --> 00:03:30.500
From a local host machine is like this.

68
00:03:31.400 --> 00:03:34.700
If you scan a particular range of IP addresses into

69
00:03:34.700 --> 00:03:38.100
 a subnet or network, you can see a beautiful schematic

70
00:03:37.100 --> 00:03:40.500
 diagram with shows all the

71
00:03:40.500 --> 00:03:43.100
 particular IP addresses into your network that you

72
00:03:43.100 --> 00:03:43.800
 have scanned.

73
00:03:45.300 --> 00:03:48.500
If you go to fish eye, you will get a similar type of output

74
00:03:48.500 --> 00:03:51.900
 but we have only scanned one specific Target.

75
00:03:51.900 --> 00:03:54.600
 That's why you cannot basically make out

76
00:03:54.600 --> 00:03:55.700
 from this diagram.

77
00:03:57.200 --> 00:04:01.200
You can also save the graphic as you can see over here into

78
00:04:00.200 --> 00:04:04.200
 different file formats. We like

79
00:04:03.200 --> 00:04:06.400
 to save this output into PDF format.

80
00:04:09.400 --> 00:04:10.700
If you go in host details.

81
00:04:11.600 --> 00:04:14.200
Here you can see the output details about

82
00:04:14.200 --> 00:04:17.100
 this host that you have scanned. You can

83
00:04:17.100 --> 00:04:18.300
 see the host it is up.

84
00:04:19.100 --> 00:04:22.700
The ports which are found to be open R2. There is only one filtered

85
00:04:22.700 --> 00:04:26.000
 Port close ports are 97 scan ports

86
00:04:25.100 --> 00:04:28.600
 are hundred up time not available last

87
00:04:28.600 --> 00:04:31.700
 boot when happened not available. The IP

88
00:04:31.700 --> 00:04:35.000
 has been converted into you can see ipv4. We

89
00:04:34.100 --> 00:04:37.500
 are not able to identify the MAC address and the

90
00:04:37.500 --> 00:04:39.900
 host name. Are these host names?

91
00:04:40.800 --> 00:04:43.100
Alright, so we have got this particular information.

92
00:04:45.800 --> 00:04:48.000
Which falls under host details?

93
00:04:48.700 --> 00:04:50.000
for this particular output

94
00:04:51.100 --> 00:04:55.200
So I hope you guys understood how you can utilize the

95
00:04:54.200 --> 00:04:57.700
 zenmap for running any

96
00:04:57.700 --> 00:05:00.000
 particular scan and you can

97
00:05:00.100 --> 00:05:03.500
 see the output clearly and you can also switch between

98
00:05:03.500 --> 00:05:06.900
 this functionalities which we have discussed

99
00:05:06.900 --> 00:05:07.300
 over here.

100
00:05:09.200 --> 00:05:10.400
Okay, so

101
00:05:11.700 --> 00:05:11.900
now

102
00:05:12.700 --> 00:05:15.400
Let's try to scan a particular.

103
00:05:17.000 --> 00:05:17.800
subnet

104
00:05:18.400 --> 00:05:21.100
So let's say we scan the whole subnet.

105
00:05:22.200 --> 00:05:25.400
Or the whole particular host from the first till the

106
00:05:25.400 --> 00:05:29.400
 last 256 host and run a scan

107
00:05:28.400 --> 00:05:30.500
 which is a quick scan.

108
00:05:35.700 --> 00:05:38.300
As you can see it says fail to resolve over

109
00:05:38.300 --> 00:05:41.600
 here. So it has not able to resolve. So

110
00:05:41.600 --> 00:05:43.700
 let us try it this way.

111
00:05:51.200 --> 00:05:55.500
Oops, I think I gave it the wrong way. Sorry, so.

112
00:05:59.100 --> 00:06:02.500
You can see the target has been scanned but it is only scanned first Target

113
00:06:02.500 --> 00:06:05.900
 because we gave it the wrong way, which is slash 256.

114
00:06:06.800 --> 00:06:09.600
instead now, we will try to rectify this

115
00:06:09.600 --> 00:06:10.000
 and

116
00:06:12.300 --> 00:06:16.400
we will try to scan the host into

117
00:06:15.400 --> 00:06:17.100
 the whole network.

118
00:06:18.200 --> 00:06:19.500
By giving the star over there.

119
00:06:20.400 --> 00:06:23.400
So if you give the star it will start scanning all the

120
00:06:23.400 --> 00:06:25.200
 particular host into the network.

121
00:06:26.100 --> 00:06:26.500
as you can see

122
00:06:27.700 --> 00:06:30.900
it has scanned the whole range and it is identified already

123
00:06:30.900 --> 00:06:33.400
 which hosts are up on the left hand

124
00:06:33.400 --> 00:06:34.100
 side as you can see.

125
00:06:35.900 --> 00:06:38.200
0.1. 1 0 1 1 0 2 1 0 3

126
00:06:38.200 --> 00:06:41.300
 and 1 0 6 this host are up. These are

127
00:06:41.300 --> 00:06:44.600
 the ports which are identify and now you can see the topology

128
00:06:44.600 --> 00:06:47.500
 view it contain multiple hosts

129
00:06:47.500 --> 00:06:48.800
 as you can see over here.

130
00:06:49.600 --> 00:06:52.200
So from the localhost machine we are able to scan this particular

131
00:06:52.200 --> 00:06:52.800
 host.

132
00:06:54.200 --> 00:06:57.100
And these are all the host for where we have

133
00:06:57.100 --> 00:07:00.500
 identified the port and the service version details.

134
00:07:06.800 --> 00:07:09.700
So as you can see all the scans that we run goes under

135
00:07:09.700 --> 00:07:10.800
 the scan stab.

136
00:07:12.600 --> 00:07:16.000
In the services, you will be able to identify with Services. We

137
00:07:15.200 --> 00:07:18.400
 have scanned from and map and unmapped.

138
00:07:19.100 --> 00:07:22.400
Has identified to be up and running so we

139
00:07:22.400 --> 00:07:25.300
 can see DNS. Is there HTTP IMAP?

140
00:07:26.200 --> 00:07:29.600
karbros POP3 RPC mine SMTP

141
00:07:29.600 --> 00:07:30.700
 SSH Etc

142
00:07:34.200 --> 00:07:37.600
So this was it for this particular video? I hope

143
00:07:37.600 --> 00:07:41.100
 you guys understood how you can scan a range

144
00:07:40.100 --> 00:07:43.900
 of ips into your particular

145
00:07:43.900 --> 00:07:46.100
 network using zenmap. Thank you.
