WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.900 --> 00:00:07.900
Hello everyone. So

1
00:00:07.900 --> 00:00:10.800
 in this video we are going to see how can

2
00:00:10.800 --> 00:00:13.900
 we exclude host from our

3
00:00:13.900 --> 00:00:15.700
 Network into our scan?

4
00:00:16.400 --> 00:00:19.000
so as you can see the command that I

5
00:00:19.200 --> 00:00:20.900
 have typed is nmap the

6
00:00:21.800 --> 00:00:22.700
subnet

7
00:00:24.200 --> 00:00:27.900
and hyphen hyphen exclude this particular host

8
00:00:27.900 --> 00:00:31.100
 from scanning, which is 192 168

9
00:00:30.100 --> 00:00:33.200
 43 dot 213.

10
00:00:34.200 --> 00:00:36.300
and hyphen V which means

11
00:00:37.100 --> 00:00:39.700
show me the output in verbose mode.

12
00:00:41.100 --> 00:00:44.500
So now I will hit enter and you can see the scanning

13
00:00:44.500 --> 00:00:46.000
 has started successfully.

14
00:00:47.200 --> 00:00:49.200
So let's wait for the output and see.

15
00:00:51.700 --> 00:00:55.000
As you can see the scan has completed successfully. Let's check

16
00:00:54.300 --> 00:00:56.900
 for the host. That was two and three.

17
00:00:57.600 --> 00:01:00.400
As you can see two one two and two

18
00:01:00.400 --> 00:01:03.500
 one four, which means two one three has

19
00:01:03.500 --> 00:01:06.500
 been excluded from this specific scan.

20
00:01:08.800 --> 00:01:09.900
Let's go down and check.

21
00:01:10.700 --> 00:01:13.400
As you can see, I've only identified The Two Hosts

22
00:01:13.400 --> 00:01:16.100
 are up. This is the first host and this is

23
00:01:16.100 --> 00:01:20.300
 the second host which is the router. So we have successfully excluded

24
00:01:19.300 --> 00:01:23.400
 the host that is 213 from

25
00:01:22.400 --> 00:01:25.800
 our scan. So remember

26
00:01:26.800 --> 00:01:29.800
the syntax of doing this scan is

27
00:01:29.800 --> 00:01:32.300
 hyphen hyphen exclude and any IP

28
00:01:32.300 --> 00:01:35.300
 address that you want to exclude from the

29
00:01:37.300 --> 00:01:40.300
Network, for example I give your X

30
00:01:40.300 --> 00:01:43.900
 instead of X you have to type any IP

31
00:01:43.900 --> 00:01:46.200
 address that you want to exclude from

32
00:01:46.200 --> 00:01:47.100
 the scan

33
00:01:48.800 --> 00:01:49.100
X

34
00:01:50.700 --> 00:01:53.400
needs to be replaced by the IP address that you

35
00:01:53.400 --> 00:01:54.400
 want to exclude.

36
00:01:55.300 --> 00:01:57.300
So I hope you guys understood this. Thank you.
