WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.900 --> 00:00:07.900
Hello everyone. So in

1
00:00:07.900 --> 00:00:10.200
 this video we are going to learn how we

2
00:00:10.200 --> 00:00:13.800
 can scan the whole host subnet or

3
00:00:13.800 --> 00:00:16.400
 the network using and map.

4
00:00:17.600 --> 00:00:20.300
So, let's see this. How can we scan the whole network?

5
00:00:21.600 --> 00:00:25.300
for that first, you can install IP calc

6
00:00:24.300 --> 00:00:27.400
 IP calc is the tool which

7
00:00:27.400 --> 00:00:30.500
 is pre-installed in Kali Linux and parados if

8
00:00:30.500 --> 00:00:33.300
 you are on any other Linux distribution

9
00:00:33.300 --> 00:00:34.200
 you can install

10
00:00:35.300 --> 00:00:37.600
So first, I'm going to install IP calc.

11
00:00:41.500 --> 00:00:44.400
As you can see IP calc is already installed in my

12
00:00:44.400 --> 00:00:47.700
 computer. So let's see. Why did we install IP calc

13
00:00:47.700 --> 00:00:50.700
 and what is the usage of Ip calc? So

14
00:00:50.700 --> 00:00:53.600
 you just have to type IP calc and the IP address

15
00:00:53.600 --> 00:00:54.300
 of your machine.

16
00:00:55.100 --> 00:00:58.100
You can see a beautiful output on the screen in which you can

17
00:00:58.100 --> 00:01:01.800
 see my address. Is this particular address? This is

18
00:01:01.800 --> 00:01:04.700
 my net mask. This is my Wild Card the

19
00:01:04.700 --> 00:01:05.800
 network that I'm into.

20
00:01:07.100 --> 00:01:10.200
The host men host Max which is the minimum number

21
00:01:10.200 --> 00:01:13.600
 of force the first host the last host barotkas address

22
00:01:13.600 --> 00:01:16.400
 and number of hosts into my network, which is

23
00:01:16.400 --> 00:01:19.700
 254 and this is a Class C private Network.

24
00:01:20.900 --> 00:01:23.300
Perfect. So now what we are going to do is

25
00:01:23.300 --> 00:01:26.300
 we are going to run an nmap scan onto our

26
00:01:26.300 --> 00:01:29.600
 whole network and let's see if you

27
00:01:29.600 --> 00:01:32.300
 are able to do host Discovery onto a network

28
00:01:32.300 --> 00:01:35.900
 and identify which host are running right

29
00:01:35.900 --> 00:01:36.100
 now.

30
00:01:39.500 --> 00:01:43.100
So we are going to take this to scan using

31
00:01:42.100 --> 00:01:45.100
 nmap. So for that you have to

32
00:01:45.100 --> 00:01:45.900
 type nmap.

33
00:01:48.100 --> 00:01:49.800
and the network

34
00:01:51.400 --> 00:01:54.900
/ 24 hyphen V to see the output in verbose

35
00:01:54.900 --> 00:01:55.200
 mode.

36
00:02:01.200 --> 00:02:04.400
As you can see the scan has started successfully and I can

37
00:02:04.400 --> 00:02:05.200
 see over here.

38
00:02:06.100 --> 00:02:11.200
And map has already identified the open ports on 19 168

39
00:02:09.200 --> 00:02:12.700
 192 168

40
00:02:12.700 --> 00:02:16.200
 0.102 and 192 168 0.1

41
00:02:15.200 --> 00:02:19.300
 2 host which means two host

42
00:02:18.300 --> 00:02:21.300
 are already up into my network.

43
00:02:24.900 --> 00:02:26.500
Let me just skip the scan.

44
00:02:30.800 --> 00:02:33.000
Yep, as you can see the scan has been

45
00:02:33.400 --> 00:02:36.800
 completed successfully and nmap has identified total

46
00:02:36.800 --> 00:02:39.200
 two number of hosts, which are up. The first

47
00:02:39.200 --> 00:02:42.600
 one is the router which you can see over here. And the

48
00:02:42.600 --> 00:02:45.300
 second one is this computer through which the scan is

49
00:02:45.300 --> 00:02:48.600
 going. So this was the way to identify the

50
00:02:48.600 --> 00:02:51.400
 number of host which are into your whole

51
00:02:51.400 --> 00:02:52.100
 network.

52
00:02:53.100 --> 00:02:54.700
I hope you guys understood. Thank you.
