WEBVTT - This file was automatically generated by VIMEO

0
00:00:05.200 --> 00:00:08.600
Hello everyone. So in the previous video we saw how

1
00:00:08.600 --> 00:00:11.000
 you can perform the scan on the

2
00:00:11.300 --> 00:00:14.100
 whole network and identify which hosts are

3
00:00:14.100 --> 00:00:17.200
 up into your network. So in this video we are going

4
00:00:17.200 --> 00:00:20.400
 to see the same scan, but we are going to tune the scan

5
00:00:20.400 --> 00:00:23.000
 to give the output much more faster.

6
00:00:24.200 --> 00:00:27.800
So we already know that nmap uses and scans

7
00:00:27.800 --> 00:00:29.500
 1000 ports.

8
00:00:30.100 --> 00:00:33.800
By default, but we are going to use a fast

9
00:00:33.800 --> 00:00:36.800
 scan to scan only 100 ports,

10
00:00:36.800 --> 00:00:40.400
 which will give us the results faster compared

11
00:00:39.400 --> 00:00:41.500
 to the normal scan.

12
00:00:42.700 --> 00:00:45.400
As you can see on the terminal I have given the

13
00:00:45.400 --> 00:00:49.000
 same command. But this time I have added hyphen f

14
00:00:48.600 --> 00:00:51.900
 flag which stands for fast scan.

15
00:00:54.800 --> 00:00:57.500
As you can see the scan has started successfully and this

16
00:00:57.500 --> 00:01:01.000
 time and map is only scanning for hundred ports.

17
00:01:01.700 --> 00:01:01.900
So

18
00:01:03.800 --> 00:01:06.800
we will get the output very quick. Can you

19
00:01:06.800 --> 00:01:11.500
 see we got the output in 9.3636 seconds

20
00:01:11.500 --> 00:01:14.700
 only about whatever devices were up

21
00:01:14.700 --> 00:01:15.700
 into our Network.

22
00:01:16.800 --> 00:01:19.400
So I hope you guys understood this and

23
00:01:19.400 --> 00:01:22.400
 you can utilize this to do a quick scan

24
00:01:22.400 --> 00:01:25.500
 and understand the overview of your network, which

25
00:01:25.500 --> 00:01:28.200
 devices are up and down. Thank you.
