WEBVTT - This file was automatically generated by VIMEO

0
00:00:12.100 --> 00:00:12.700
Hello, everyone.

1
00:00:13.500 --> 00:00:16.700
so in this video we are going to see how can

2
00:00:16.700 --> 00:00:19.600
 we perform port scan using names

3
00:00:19.600 --> 00:00:22.300
 of the port so the command is

4
00:00:23.500 --> 00:00:24.500
type nmap

5
00:00:25.200 --> 00:00:28.500
the target IP address - P flank

6
00:00:28.500 --> 00:00:31.700
 which stands for port and the port name that

7
00:00:31.700 --> 00:00:34.700
 you want to scan. So let's say I want to scan for FTP

8
00:00:34.700 --> 00:00:35.300
 and SSH.

9
00:00:36.100 --> 00:00:39.400
So I'm going to type FTP comma SSH and

10
00:00:39.400 --> 00:00:42.500
 hyphen V with stands for show the output

11
00:00:42.500 --> 00:00:43.500
 in verbose mode.

12
00:00:45.300 --> 00:00:48.500
I will hit enter and I will see if these

13
00:00:48.500 --> 00:00:51.400
 two ports are open or closed for this

14
00:00:51.400 --> 00:00:52.600
 specific Target.

15
00:00:53.500 --> 00:00:56.500
As you can see out of both the ports only one port

16
00:00:56.500 --> 00:00:59.200
 is opened. There is SSH and FTP is

17
00:00:59.200 --> 00:00:59.800
 closed.

18
00:01:01.900 --> 00:01:04.900
So this is the way you can scan

19
00:01:04.900 --> 00:01:08.600
 for as many as Port you

20
00:01:07.600 --> 00:01:10.700
 want. So let's scan

21
00:01:10.700 --> 00:01:12.900
 one more Port that is SMTP.

22
00:01:13.700 --> 00:01:16.600
And let's see if this port is open or closed.

23
00:01:16.600 --> 00:01:19.600
 So here we have identified that the

24
00:01:19.600 --> 00:01:21.700
 port SMTP as closed.

25
00:01:22.300 --> 00:01:26.200
I hope you guys understood how you can scan Port using

26
00:01:25.200 --> 00:01:27.500
 their names. Thank you.
