WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.800 --> 00:00:07.700
Hello everyone. So in this video we

1
00:00:07.700 --> 00:00:10.600
 are going to see no randomize or

2
00:00:10.600 --> 00:00:13.100
 sequential type of port scan.

3
00:00:14.200 --> 00:00:17.700
So to do this scan the syntax is and map

4
00:00:17.700 --> 00:00:21.100
 the target IP address hyphen small

5
00:00:20.100 --> 00:00:21.600
 r

6
00:00:22.500 --> 00:00:26.400
Which stands for no randomize or sequential and

7
00:00:25.400 --> 00:00:28.100
 hyphen V to see the

8
00:00:28.100 --> 00:00:30.000
 output in verbose mode?

9
00:00:30.800 --> 00:00:33.900
So you can scan a Target Port number using

10
00:00:33.900 --> 00:00:36.800
 no randomized Sports scan and nmap

11
00:00:36.800 --> 00:00:39.300
 will start scanning the TCP and UDP

12
00:00:39.300 --> 00:00:41.000
 ports in a sequential manner.

13
00:00:41.700 --> 00:00:44.700
So the port scanning will go in a

14
00:00:44.700 --> 00:00:47.400
 sequence manner with starts from 1

15
00:00:47.400 --> 00:00:52.600
 to 3, and it will go till 65,535

16
00:00:50.600 --> 00:00:53.200
 ports.

17
00:00:54.200 --> 00:00:57.500
So you can always add a hyphen V to see the

18
00:00:57.500 --> 00:01:00.200
 verbose output the example of

19
00:01:00.200 --> 00:01:03.200
 do this type of scan is nmap. The

20
00:01:03.200 --> 00:01:06.800
 IP address followed by a small hyphen R.

21
00:01:06.800 --> 00:01:09.500
 So let's see this practical in action

22
00:01:09.500 --> 00:01:11.100
 over here onto my screen.

23
00:01:12.200 --> 00:01:14.700
I'm going to type a command, which is nmap.

24
00:01:15.900 --> 00:01:18.000
the target IP address that I want to

25
00:01:18.000 --> 00:01:18.500
 scan

26
00:01:19.600 --> 00:01:20.200
followed by

27
00:01:21.300 --> 00:01:25.000
hyphen, small R which stands for no

28
00:01:24.000 --> 00:01:25.500
 randomize

29
00:01:26.300 --> 00:01:29.700
as you can see and map by default performs.

30
00:01:30.900 --> 00:01:33.400
top 1000 port scan, but you

31
00:01:33.400 --> 00:01:36.100
 can see the output over here is in a

32
00:01:36.100 --> 00:01:40.300
 sequential manner as you can see first is

33
00:01:39.300 --> 00:01:42.700
 21 then 22 80

34
00:01:42.700 --> 00:01:45.000
 1 1 1 9 8 7 6

35
00:01:46.300 --> 00:01:49.600
So in this way, we found out that if

36
00:01:49.600 --> 00:01:52.300
 you want to do a port scan into a

37
00:01:52.300 --> 00:01:55.500
 sequential manner, then you can do it this

38
00:01:55.500 --> 00:01:55.700
 way.

39
00:01:59.500 --> 00:02:03.200
So let's try to do one more scan of nmap of

40
00:02:02.200 --> 00:02:05.300
 scanme Dot nmap.org.

41
00:02:06.500 --> 00:02:09.600
In this you can see the port scan has again started

42
00:02:09.600 --> 00:02:12.600
 and it will perform in a sequential manner

43
00:02:12.600 --> 00:02:13.000
 again.

44
00:02:15.200 --> 00:02:18.300
As you can see the ports that we have identified which are

45
00:02:18.300 --> 00:02:21.400
 open are these 422 followed by

46
00:02:21.400 --> 00:02:25.600
 80 139 445 9929

47
00:02:24.600 --> 00:02:27.600
 3 1 double

48
00:02:27.600 --> 00:02:30.800
 37. So these are the port numbers which are

49
00:02:30.800 --> 00:02:34.200
 shown but in a sequential manner.

50
00:02:34.800 --> 00:02:37.400
So I hope you guys understood how you can perform this type

51
00:02:37.400 --> 00:02:37.700
 of scan.

52
00:02:38.400 --> 00:02:38.800
Thank you.
