WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.800 --> 00:00:08.000
Hello everyone. So

1
00:00:07.300 --> 00:00:11.000
 in this video we are going to see the nmap

2
00:00:10.400 --> 00:00:12.200
 top port scan.

3
00:00:12.900 --> 00:00:16.100
The syntax of doing this scan is nmap the

4
00:00:15.100 --> 00:00:16.800
 target IP address.

5
00:00:17.800 --> 00:00:21.000
and hyphen hyphen top hyphen

6
00:00:20.300 --> 00:00:22.600
 ports and n

7
00:00:23.800 --> 00:00:26.800
where n stands for the number

8
00:00:26.800 --> 00:00:30.100
 of top ports you want to identify using

9
00:00:29.100 --> 00:00:30.700
 nmap?

10
00:00:31.700 --> 00:00:34.500
So you can scan a Target top port numbers

11
00:00:34.500 --> 00:00:37.200
 using hyphen hyphen top hyphen port.

12
00:00:37.900 --> 00:00:40.800
Command. Okay, you have to add an

13
00:00:40.800 --> 00:00:43.100
 where n stands for

14
00:00:43.100 --> 00:00:45.000
 the number of ports that you want to see.

15
00:00:46.300 --> 00:00:49.600
For example, if you want to scan 10 ports, you

16
00:00:49.600 --> 00:00:53.300
 will type 10 instead of N and nmap

17
00:00:52.300 --> 00:00:55.900
 will automatically start scanning for top

18
00:00:55.900 --> 00:00:58.200
 10 TCP and UDP

19
00:00:58.200 --> 00:01:01.400
 ports. You can always add hyphen V to see the output

20
00:01:01.400 --> 00:01:04.300
 inverse mode as you can see the example

21
00:01:04.300 --> 00:01:07.600
 which is given which is nmap the IP address hyphen

22
00:01:07.600 --> 00:01:10.600
 top hyphen ports and the number of ports

23
00:01:10.600 --> 00:01:13.200
 that you want to scam. So let's see

24
00:01:13.200 --> 00:01:14.300
 the practiced. So as you can see

25
00:01:15.400 --> 00:01:18.400
On the terminal I'm going to type the command which is

26
00:01:18.400 --> 00:01:21.200
 nmap the target IP address.

27
00:01:23.500 --> 00:01:26.900
Followed by hyphen hyphen top hyphen ports and

28
00:01:26.900 --> 00:01:29.800
 let's say I want to see top 10 ports

29
00:01:29.800 --> 00:01:32.400
 followed by hyphen V which is

30
00:01:32.400 --> 00:01:34.900
 to see the output in verbose mode.

31
00:01:36.700 --> 00:01:39.600
As you can see I have got the output over here. And

32
00:01:39.600 --> 00:01:42.600
 if we count then we have exactly

33
00:01:42.600 --> 00:01:45.700
 seen the status of top 10 ports.

34
00:01:46.800 --> 00:01:49.400
So first is 21 second is 22

35
00:01:49.400 --> 00:01:50.300
 23.

36
00:01:51.300 --> 00:01:54.100
Then 25 fourth. This is fifth

37
00:01:54.100 --> 00:01:57.100
 sixth seventh eight ninth and

38
00:01:57.100 --> 00:02:01.000
 10th. So this way you can see the top

39
00:02:00.600 --> 00:02:03.700
 ports that you want to scan. So let's say instead

40
00:02:03.700 --> 00:02:06.600
 of 10 this time. We make it to 5.

41
00:02:07.500 --> 00:02:10.200
So you can see we saw the output for the

42
00:02:10.200 --> 00:02:12.000
 top five ports.

43
00:02:14.600 --> 00:02:17.600
in the similar manner if you make it to top

44
00:02:18.800 --> 00:02:22.000
20 and I just type hyphen

45
00:02:21.300 --> 00:02:24.300
 hyphen open then I will be able to see

46
00:02:24.300 --> 00:02:27.900
 the top 20 ports, but I have tuned this

47
00:02:27.900 --> 00:02:30.600
 can so only to see

48
00:02:30.600 --> 00:02:33.500
 the open ports by typing hyphen hyphen

49
00:02:33.500 --> 00:02:36.500
 open. So I'm only able to see the open ports out

50
00:02:36.500 --> 00:02:39.800
 of 20 and they are only four as you

51
00:02:39.800 --> 00:02:40.900
 can see onto the screen.

52
00:02:41.700 --> 00:02:44.800
So I hope you guys understood how you can perform this

53
00:02:44.800 --> 00:02:46.300
 type of scan. Thank you.
