WEBVTT - This file was automatically generated by VIMEO

0
00:00:04.900 --> 00:00:07.400
Hello everyone and welcome to

1
00:00:07.400 --> 00:00:10.100
 the script kiddie output to a file

2
00:00:10.100 --> 00:00:10.700
 type of scan.

3
00:00:11.600 --> 00:00:14.500
So basically scriptkiri is is a word which is

4
00:00:14.500 --> 00:00:14.900
 used.

5
00:00:15.700 --> 00:00:18.400
in the hacking Community for those people

6
00:00:19.800 --> 00:00:22.900
Who does not actually know how to

7
00:00:22.900 --> 00:00:25.400
 perform or how to do attacks, but

8
00:00:25.400 --> 00:00:28.200
 they actually copy the stuff and copy the

9
00:00:28.200 --> 00:00:32.200
 footsteps of other hackers and they try to our intend

10
00:00:31.200 --> 00:00:35.100
 to break or hack into something this

11
00:00:34.100 --> 00:00:35.700
 are.

12
00:00:36.700 --> 00:00:39.100
Commonly referred as script kiddies.

13
00:00:39.900 --> 00:00:42.400
Also, we have the option to save

14
00:00:42.400 --> 00:00:46.000
 the output into a fancy script key

15
00:00:45.400 --> 00:00:48.300
 format, which is also known as the

16
00:00:48.300 --> 00:00:50.000
 lead language. So

17
00:00:51.200 --> 00:00:54.900
the syntax of doing this particular scan is and map the

18
00:00:54.900 --> 00:00:57.800
 target IP address hyphen OS which

19
00:00:57.800 --> 00:01:00.900
 stands for output in script KD

20
00:01:00.900 --> 00:01:02.400
 format and the file name.

21
00:01:03.800 --> 00:01:06.700
So you can always add a hyphen V to see the output

22
00:01:06.700 --> 00:01:07.700
 in verbose mode.

23
00:01:08.700 --> 00:01:11.400
The example of doing this scan is nmap the

24
00:01:11.400 --> 00:01:14.500
 target IP address hyphen OS and the file

25
00:01:14.500 --> 00:01:15.900
 name as you can see over here.

26
00:01:16.900 --> 00:01:19.400
So, let's see. How can we perform this particular

27
00:01:19.400 --> 00:01:20.800
 scan in practical?

28
00:01:21.600 --> 00:01:24.300
You can see on my terminal. I have given

29
00:01:24.300 --> 00:01:28.300
 the command which is nmap the target IP address hyphen

30
00:01:27.300 --> 00:01:30.600
 B. I'm going to scan the ports

31
00:01:30.600 --> 00:01:33.800
 from 1 to 5000 hyphen V

32
00:01:33.800 --> 00:01:36.400
 flag to see the output in verbose mode -

33
00:01:36.400 --> 00:01:39.700
 OS which stands for output in script

34
00:01:39.700 --> 00:01:42.300
 KD mode and the file name that you want to save the

35
00:01:42.300 --> 00:01:42.900
 output in.

36
00:01:48.800 --> 00:01:51.100
I will hit enter and the scan will

37
00:01:51.100 --> 00:01:52.300
 successfully initiate.

38
00:01:53.700 --> 00:01:57.000
As you can see the scan has started successfully and nmap

39
00:01:56.100 --> 00:01:59.400
 has already identified three ports are

40
00:01:59.400 --> 00:02:02.500
 open out of the 5000 ports, which we are

41
00:02:02.500 --> 00:02:03.400
 about to scan.

42
00:02:05.500 --> 00:02:05.900
I will just

43
00:02:06.900 --> 00:02:07.800
skip the scan.

44
00:02:12.200 --> 00:02:15.600
As you can see I have reinitiated the scan with only 100

45
00:02:15.600 --> 00:02:18.200
 ports this time as it was taking much longer

46
00:02:18.200 --> 00:02:21.500
 and we can see the scan has been successfully completed

47
00:02:21.500 --> 00:02:24.000
 and we have found out that two ports are

48
00:02:24.200 --> 00:02:25.700
 open, which is 22 and 80.

49
00:02:27.200 --> 00:02:28.100
If you notice over here.

50
00:02:29.100 --> 00:02:32.500
I did LS command and you can see I have created

51
00:02:32.500 --> 00:02:35.500
 a file which is scriptkidi.txt by the

52
00:02:35.500 --> 00:02:37.300
 end map scan that we just performed.

53
00:02:38.600 --> 00:02:40.300
So let's try to read this file.

54
00:02:44.200 --> 00:02:47.500
So when I try to read this file, you can see the output that

55
00:02:47.500 --> 00:02:50.300
 I have got so you can see it looks like

56
00:02:50.300 --> 00:02:51.200
 a lead language.

57
00:02:52.100 --> 00:02:55.800
Nmap, scan report for this particular Target IP

58
00:02:55.800 --> 00:02:58.900
 as you can see Port State Service open

59
00:02:58.900 --> 00:03:01.900
 SSH open HTTP. So

60
00:03:01.900 --> 00:03:04.400
 this is how the art output looks like.

61
00:03:07.900 --> 00:03:10.600
The output is nothing different, but it is

62
00:03:10.600 --> 00:03:12.500
 written in a fancy way.

63
00:03:13.500 --> 00:03:15.300
I hope you guys understood this. Thank you.
