WEBVTT - This file was automatically generated by VIMEO

0
00:00:07.500 --> 00:00:10.400
Welcome back guys to video number 5.4 in

1
00:00:10.400 --> 00:00:13.500
 this video. We're going to send the data from MCAT GSM 1400

2
00:00:13.500 --> 00:00:17.100
 to hologram.io Cloud. So firstly

3
00:00:16.100 --> 00:00:20.300
 click on the home and here you will get the statistical

4
00:00:19.300 --> 00:00:22.200
 before moving on you need to log

5
00:00:22.200 --> 00:00:25.800
 into your hologram.io dashboard and

6
00:00:25.800 --> 00:00:28.600
 here you will see the active devices connected ready

7
00:00:28.600 --> 00:00:31.800
 and the past devices click on the devices and from

8
00:00:31.800 --> 00:00:34.800
 there click on the activate more Sims and

9
00:00:34.800 --> 00:00:38.000
 you need to activate your sim

10
00:00:37.100 --> 00:00:41.000
 before using it. I already have activated but

11
00:00:40.600 --> 00:00:42.200
 let me click on that.

12
00:00:44.700 --> 00:00:47.500
And you need to provide your enter Sim number and

13
00:00:47.500 --> 00:00:50.300
 after that you will get some sort of

14
00:00:50.300 --> 00:00:53.700
 different configuration like range of Sims list

15
00:00:53.700 --> 00:00:57.400
 of Sims and you are good to go with that. Okay, there are

16
00:00:57.400 --> 00:01:00.100
 different steps like data plan for you. I

17
00:01:00.100 --> 00:01:01.000
 need to click on again.

18
00:01:06.200 --> 00:01:09.500
After putting the number you will select the data plan data usage

19
00:01:09.500 --> 00:01:12.400
 limits same device assigned tags that are puttery

20
00:01:12.400 --> 00:01:15.300
 filter V and activate and then you will be good to

21
00:01:15.300 --> 00:01:18.800
 go with that. I already have once him which is activated now click

22
00:01:18.800 --> 00:01:21.900
 on that and here you will see the statistics of

23
00:01:21.900 --> 00:01:24.300
 a SIM card. My sim is

24
00:01:24.300 --> 00:01:28.400
 activated with the teller Pakistan limited carrier session

25
00:01:27.400 --> 00:01:30.300
 started on March 1st. This is

26
00:01:30.300 --> 00:01:33.200
 the data and this is the current location and it's

27
00:01:33.200 --> 00:01:36.700
 showing the status that the message is coming to

28
00:01:36.700 --> 00:01:39.100
 the Tower and Tower Center the data to

29
00:01:39.100 --> 00:01:42.700
 the Hologram and hologram capture the

30
00:01:42.700 --> 00:01:45.300
 data and send it to the cloud and if

31
00:01:45.300 --> 00:01:46.600
 you click on that you will

32
00:01:47.400 --> 00:01:50.300
Pay all the statistics same local Tower Global network

33
00:01:50.300 --> 00:01:51.700
 and internet access, okay.

34
00:01:53.400 --> 00:01:55.700
so before moving on for the example just

35
00:01:57.700 --> 00:02:00.900
go back to the Hologram support and

36
00:02:02.500 --> 00:02:05.700
Documentation area and here you will get the documentation related

37
00:02:05.700 --> 00:02:08.800
 to the modems routers GPS devices development board.

38
00:02:08.800 --> 00:02:12.000
 And for the upper case, we have a MK GSM

39
00:02:11.400 --> 00:02:14.500
 1400. So we are good to go with that click

40
00:02:14.500 --> 00:02:17.400
 on that and you will get all the steps and

41
00:02:17.400 --> 00:02:20.200
 the code here so already I have a code here.

42
00:02:22.100 --> 00:02:25.700
That I copied from that page, but before moving

43
00:02:25.700 --> 00:02:27.800
 to the code we need to.

44
00:02:29.600 --> 00:02:30.600
Install the library.

45
00:02:32.200 --> 00:02:34.100
Mkrgsm, okay.

46
00:02:43.200 --> 00:02:44.700
mkr GSM

47
00:02:49.100 --> 00:02:52.200
and this is the library which is developed by

48
00:02:52.200 --> 00:02:55.400
 the Arduino official team. And I already have

49
00:02:55.400 --> 00:02:59.100
 that Library. You guys need to install that Library. Okay. Now it's

50
00:02:58.100 --> 00:03:01.400
 time to come to the core. You didn't

51
00:03:01.400 --> 00:03:04.500
 need to modify just to modify these three things

52
00:03:04.500 --> 00:03:08.200
 by default is something return message

53
00:03:07.200 --> 00:03:10.400
 here and the topic so firstly come

54
00:03:10.400 --> 00:03:13.300
 to the device key from where we will get the device

55
00:03:13.300 --> 00:03:13.600
 key.

56
00:03:15.800 --> 00:03:19.100
Select the SIM card click on the webhooks and

57
00:03:18.100 --> 00:03:21.600
 click on the show device key

58
00:03:21.600 --> 00:03:24.100
 and this is the key copy it.

59
00:03:27.300 --> 00:03:27.700
and

60
00:03:28.900 --> 00:03:31.500
control V and we are good to go with that

61
00:03:31.500 --> 00:03:33.700
 hologram message by default.

62
00:03:35.200 --> 00:03:38.500
They write it here some sort of a different passage here

63
00:03:38.500 --> 00:03:42.100
 just like that your hologram your message

64
00:03:41.100 --> 00:03:45.400
 here and your topic. Okay, the Hologram

65
00:03:44.400 --> 00:03:48.000
 distinguish your content with respect

66
00:03:47.200 --> 00:03:50.500
 to the topic. If you have a multiple sensor you

67
00:03:50.500 --> 00:03:53.400
 want to send the data separately. Then

68
00:03:53.400 --> 00:03:56.400
 you need to make a separate topic for each of

69
00:03:56.400 --> 00:03:57.000
 content.

70
00:03:57.700 --> 00:04:00.100
But right now I am

71
00:04:00.100 --> 00:04:03.200
 assuming that I have connected three sound system

72
00:04:03.200 --> 00:04:06.400
 temperature humidity and the aqi and I'm

73
00:04:08.400 --> 00:04:11.800
Going to send in a one badge. So I mentioned

74
00:04:11.800 --> 00:04:14.800
 at the Sensei EnV topic and the

75
00:04:14.800 --> 00:04:17.500
 rest of things are good to go. But remember one

76
00:04:17.500 --> 00:04:20.100
 thing here we have our setup dot begin

77
00:04:20.100 --> 00:04:20.800
 and

78
00:04:21.700 --> 00:04:24.300
After uploading the code when I will click on

79
00:04:24.300 --> 00:04:27.300
 serial monitor, the system will proceed either it will not

80
00:04:27.300 --> 00:04:30.300
 work. So if you want to execute the

81
00:04:30.300 --> 00:04:34.600
 code without the serial monitoring then just make

82
00:04:34.600 --> 00:04:35.300
 the comment here.

83
00:04:40.000 --> 00:04:40.400
and

84
00:04:44.300 --> 00:04:48.000
You are good to go with that. But I want to monitor

85
00:04:47.500 --> 00:04:50.000
 all the process so.

86
00:04:51.100 --> 00:04:54.200
I'm going to use wait for the serial monitor Okay,

87
00:04:54.200 --> 00:04:57.200
 click on the upload button, but before moving on

88
00:04:57.200 --> 00:05:00.500
 you need to select the port and here we have a comp report,

89
00:05:00.500 --> 00:05:00.800
 okay?

90
00:05:01.500 --> 00:05:02.100
upload

91
00:05:15.400 --> 00:05:19.100
The code has been uploaded click on the serial monitor. Now

92
00:05:18.100 --> 00:05:22.600
 you see starting Arduino web client begin gsmxs.

93
00:05:21.600 --> 00:05:25.300
 It will took some seconds.

94
00:05:26.100 --> 00:05:29.100
To make the connectivity and the sand the data to

95
00:05:29.100 --> 00:05:29.500
 the cloud.

96
00:05:31.400 --> 00:05:32.400
Okay, come back here.

97
00:05:33.100 --> 00:05:34.300
click on the status

98
00:05:37.800 --> 00:05:41.000
and I see GSM access connecting and

99
00:05:40.200 --> 00:05:42.600
 here you see that this

100
00:05:43.100 --> 00:05:44.400
turns into the green.

101
00:05:47.100 --> 00:05:50.500
now again blue because now it's disconnected after sending the

102
00:05:50.500 --> 00:05:53.300
 data and as the usage

103
00:05:53.300 --> 00:05:53.500
 of your

104
00:05:54.600 --> 00:05:57.600
and here's the message temperature toning

105
00:05:57.600 --> 00:06:00.900
 humidity of 400 and under

106
00:06:00.900 --> 00:06:03.100
 the topic. We have mentioned here

107
00:06:03.100 --> 00:06:05.200
 EnV stands, okay.

108
00:06:06.200 --> 00:06:09.700
So you can view the data view raw and

109
00:06:09.700 --> 00:06:12.300
 it will show you all the data in the Raw condition

110
00:06:12.300 --> 00:06:15.600
 then cnv and this is a device content

111
00:06:15.600 --> 00:06:17.100
 here and all the stuff is available.

112
00:06:22.100 --> 00:06:25.300
Now the next point is how we can send the

113
00:06:25.300 --> 00:06:29.600
 data to other platforms like AWS things speak and

114
00:06:28.600 --> 00:06:31.200
 different air. We have a different

115
00:06:31.200 --> 00:06:34.400
 types of routes that we will cover in the next video.

116
00:06:34.400 --> 00:06:37.000
 So guys see you in the next video. Have a good day. Bye.
