WEBVTT - This file was automatically generated by VIMEO

0
00:00:07.400 --> 00:00:10.500
Hello everyone in this lesson. We will get familiar with

1
00:00:10.500 --> 00:00:13.600
 Wireshark. Graphical user interface. Here

2
00:00:13.600 --> 00:00:14.600
 we go now.

3
00:00:15.500 --> 00:00:18.200
On the wireshack graphical user interface. We

4
00:00:18.200 --> 00:00:22.100
 will first look at the pack this pane they

5
00:00:21.100 --> 00:00:25.000
 could this pain is located at the

6
00:00:24.200 --> 00:00:26.400
 middle of the shark window.

7
00:00:27.700 --> 00:00:31.100
In here, you can see this pain.

8
00:00:32.700 --> 00:00:34.600
Is the packet list pane?

9
00:00:35.800 --> 00:00:36.800
as you can see

10
00:00:37.700 --> 00:00:40.400
and it displays a list

11
00:00:40.400 --> 00:00:43.100
 of all the packets that have been captured before.

12
00:00:44.600 --> 00:00:47.200
And we see a summary line of

13
00:00:47.200 --> 00:00:48.400
 each packet.

14
00:00:52.100 --> 00:00:54.900
each packet along with summary information

15
00:00:56.400 --> 00:00:59.700
we can use this pen to navigate through the packets and

16
00:00:59.700 --> 00:01:00.800
 select.

17
00:01:01.700 --> 00:01:04.500
specific packets for further analysis

18
00:01:05.500 --> 00:01:07.100
one by one you can choose

19
00:01:08.100 --> 00:01:09.400
a specific packet

20
00:01:10.300 --> 00:01:11.100
on this pane

21
00:01:12.900 --> 00:01:15.600
And to pick up this pane also includes

22
00:01:15.600 --> 00:01:17.200
 a number of columns.

23
00:01:18.200 --> 00:01:19.000
as you can see

24
00:01:20.700 --> 00:01:21.900
some columns

25
00:01:23.200 --> 00:01:23.600
in here

26
00:01:26.200 --> 00:01:29.500
The First Column is the number column and it shows us

27
00:01:29.500 --> 00:01:33.000
 the number of the each packet. The

28
00:01:32.200 --> 00:01:34.800
 second one is the time column.

29
00:01:36.400 --> 00:01:39.800
and the other one source, then the

30
00:01:39.800 --> 00:01:42.500
 destination and protocol columns

31
00:01:42.500 --> 00:01:45.000
 and the lastly length and

32
00:01:45.900 --> 00:01:47.100
 info columns we have

33
00:01:48.100 --> 00:01:51.700
so we can add or remove columns to

34
00:01:51.700 --> 00:01:54.600
 change what information is presented in here.

35
00:01:55.900 --> 00:01:59.200
And we can do this in different ways. The

36
00:01:58.200 --> 00:02:02.100
 first one is to right click

37
00:02:01.100 --> 00:02:02.800
 on this.

38
00:02:04.400 --> 00:02:07.800
Column and column preferences

39
00:02:07.800 --> 00:02:09.600
 we can click on this.

40
00:02:10.700 --> 00:02:13.000
We can go to the column preferences.

41
00:02:14.400 --> 00:02:14.600
or

42
00:02:16.400 --> 00:02:20.000
in another way we can go to the edit menu.

43
00:02:21.200 --> 00:02:24.000
And click on the preferences.

44
00:02:25.200 --> 00:02:28.400
So in preferences window,

45
00:02:28.400 --> 00:02:31.400
 you can see another preferences in

46
00:02:31.400 --> 00:02:31.800
 there.

47
00:02:32.400 --> 00:02:34.900
And you can choose the columns.

48
00:02:36.100 --> 00:02:37.600
as you can see there's

49
00:02:38.900 --> 00:02:40.400
but the easiest way

50
00:02:41.300 --> 00:02:44.900
is the right clicking on the columns

51
00:02:44.900 --> 00:02:48.400
 and clicking column preferences.

52
00:02:49.600 --> 00:02:52.600
So then you can add or remove

53
00:02:52.600 --> 00:02:53.400
 the columns.

54
00:02:54.800 --> 00:02:57.100
If you click on the add a new column.

55
00:02:58.300 --> 00:03:01.500
You can see there we can add a

56
00:03:01.500 --> 00:03:02.000
 new column.

57
00:03:03.300 --> 00:03:06.800
And you can write a name to here as a columns name.

58
00:03:08.500 --> 00:03:10.300
For example, I want to write a

59
00:03:11.800 --> 00:03:12.900
Mac address

60
00:03:20.900 --> 00:03:23.500
then you can specify the type of

61
00:03:23.500 --> 00:03:24.200
 the column.

62
00:03:24.800 --> 00:03:27.100
In this way, you will Define what kind of

63
00:03:27.100 --> 00:03:29.500
 information the column will show us.

64
00:03:30.700 --> 00:03:32.300
So I will choose.

65
00:03:33.700 --> 00:03:35.200
the MAC address information

66
00:03:38.900 --> 00:03:41.500
And my column the new

67
00:03:41.500 --> 00:03:45.200
 column will show us the hardware destination

68
00:03:44.200 --> 00:03:45.600
 address.

69
00:03:46.500 --> 00:03:47.800
Which means Mac address?

70
00:03:49.000 --> 00:03:49.200
and

71
00:03:50.600 --> 00:03:52.300
I'm clicking on the ok.

72
00:03:58.300 --> 00:03:59.600
As you can see there.

73
00:04:00.800 --> 00:04:03.300
The MAC address column is

74
00:04:03.300 --> 00:04:03.900
 in here.

75
00:04:05.100 --> 00:04:08.700
And I want to change the location of Mac address column.

76
00:04:09.200 --> 00:04:12.800
Because this is the destination Mac address.

77
00:04:13.800 --> 00:04:17.200
And I can change its location

78
00:04:16.200 --> 00:04:18.100
 in here.

79
00:04:19.200 --> 00:04:20.700
after the destination column

80
00:04:22.200 --> 00:04:25.500
I want to put in there so.

81
00:04:27.200 --> 00:04:28.300
I'm moving again.

82
00:04:31.300 --> 00:04:32.800
And that's all.

83
00:04:34.100 --> 00:04:37.800
Now there is a MAC address column which shows

84
00:04:37.800 --> 00:04:39.900
 us the destination Mac address.

85
00:04:40.700 --> 00:04:43.000
Now we can remove this column again.

86
00:04:44.300 --> 00:04:47.800
And to remove this column we are clicking on

87
00:04:47.800 --> 00:04:49.200
 the remove this column.

88
00:04:50.100 --> 00:04:52.400
We have turned to be registration.

89
00:04:53.300 --> 00:04:54.100
on our window

90
00:04:55.400 --> 00:04:58.000
There is no more Mecha there is column.

91
00:04:59.200 --> 00:05:02.800
Also, you can customize that which columns will

92
00:05:02.800 --> 00:05:04.700
 be displayed on this window.

93
00:05:05.500 --> 00:05:06.700
in the packet list

94
00:05:07.700 --> 00:05:08.100
pane

95
00:05:09.300 --> 00:05:13.200
If you remove the check sign on the number column, this column

96
00:05:12.200 --> 00:05:13.900
 will disappear.

97
00:05:17.400 --> 00:05:20.800
Now there is no more number column on our

98
00:05:20.800 --> 00:05:21.200
 window.

99
00:05:22.300 --> 00:05:24.000
Again, we can add.

100
00:05:25.100 --> 00:05:28.000
We can display the number column.

101
00:05:29.200 --> 00:05:30.500
Putting the check here.

102
00:05:32.200 --> 00:05:35.800
And the number column is again displaying on

103
00:05:35.800 --> 00:05:36.400
 our window.

104
00:05:42.200 --> 00:05:45.300
And to pick details pane is located below the

105
00:05:45.300 --> 00:05:46.800
 packet list pane.

106
00:05:47.800 --> 00:05:50.600
Here, this is the packet detail

107
00:05:50.600 --> 00:05:51.000
 pane.

108
00:05:51.700 --> 00:05:54.400
Take a details pane displays the

109
00:05:54.400 --> 00:05:56.100
 details of selected packet.

110
00:05:57.200 --> 00:06:01.000
And including the packet heater and payload, it

111
00:06:00.200 --> 00:06:03.600
 will divide it down into segments as

112
00:06:03.600 --> 00:06:06.600
 we would imagine from an OSI model

113
00:06:06.600 --> 00:06:07.300
 reference.

114
00:06:08.200 --> 00:06:12.000
So the packet is split into separate and capsulation levels.

115
00:06:13.300 --> 00:06:16.500
And keep in mind that Wireshark will

116
00:06:16.500 --> 00:06:19.700
 display this encapsulation in reverse order.

117
00:06:20.900 --> 00:06:23.100
With lower layer encapsulation at the

118
00:06:23.100 --> 00:06:25.600
 top and higher layers.

119
00:06:27.200 --> 00:06:28.500
at the bottom of the window

120
00:06:29.600 --> 00:06:32.800
So each of these represents a different level.

121
00:06:33.700 --> 00:06:34.800
of the communication

122
00:06:35.800 --> 00:06:38.400
Can expand each layer to see the

123
00:06:38.400 --> 00:06:40.300
 details of the fields within it?

124
00:06:40.800 --> 00:06:41.700
So I am choosing.

125
00:06:42.700 --> 00:06:45.100
A packet to see the details.

126
00:06:47.100 --> 00:06:47.300
and

127
00:06:49.900 --> 00:06:52.500
I will choose the first packet.

128
00:06:53.700 --> 00:06:56.100
And you can expand each of

129
00:06:56.100 --> 00:06:57.900
 these details.

130
00:06:58.700 --> 00:07:00.700
I want to expand the frame.

131
00:07:01.800 --> 00:07:03.100
and as you can see

132
00:07:04.700 --> 00:07:07.800
the end capsulation type is ethernet.

133
00:07:09.200 --> 00:07:09.300
So

134
00:07:11.500 --> 00:07:15.300
the packet it is pain also includes a

135
00:07:15.300 --> 00:07:18.800
 number of tabs that provide additional information

136
00:07:18.800 --> 00:07:21.800
 about packet such as the packet bytes

137
00:07:21.800 --> 00:07:25.200
 the conversation statistics and the

138
00:07:24.200 --> 00:07:27.400
 packet expert information.

139
00:07:28.600 --> 00:07:31.600
And in here level by level.

140
00:07:32.600 --> 00:07:34.200
You will see the details.

141
00:07:35.400 --> 00:07:36.500
of the packet

142
00:07:37.300 --> 00:07:40.500
and these details are being short as

143
00:07:41.400 --> 00:07:43.700
based on the OSI model

144
00:07:47.800 --> 00:07:51.400
you can see the destination information here.

145
00:07:52.400 --> 00:07:55.500
and the source information and

146
00:07:57.100 --> 00:08:01.200
the other one Internet Protocol version 4 IP

147
00:08:00.200 --> 00:08:02.200
 version 4

148
00:08:03.600 --> 00:08:04.300
information

149
00:08:05.300 --> 00:08:07.600
for example The Source address

150
00:08:09.300 --> 00:08:10.300
the IP

151
00:08:11.600 --> 00:08:14.800
Is in here and to destination IP addresses

152
00:08:14.800 --> 00:08:15.200
 in here?

153
00:08:16.200 --> 00:08:18.100
and in the TCP

154
00:08:18.900 --> 00:08:21.200
under the TCP segment

155
00:08:22.200 --> 00:08:25.500
You can see the source Port destination port.

156
00:08:26.500 --> 00:08:28.700
and some hearing formations

157
00:08:29.800 --> 00:08:31.000
check some status.

158
00:08:32.100 --> 00:08:34.500
and the other options TCP option

159
00:08:36.600 --> 00:08:37.500
and queen

160
00:08:42.900 --> 00:08:45.300
The other pane is tacket by

161
00:08:45.300 --> 00:08:48.600
 its pain the packet by its pain is located on

162
00:08:48.600 --> 00:08:51.300
 the right side of two packet details Pane

163
00:08:51.300 --> 00:08:54.400
 and this place the raw data

164
00:08:54.400 --> 00:08:58.400
 of selected packet is a series of hexadecimal and

165
00:08:57.400 --> 00:08:59.700
 ask values.

166
00:09:01.200 --> 00:09:04.800
These are the hexadecimal values and these

167
00:09:04.800 --> 00:09:07.000
 are the ASCII values.

168
00:09:08.200 --> 00:09:12.000
You can use this pane to see the exact content

169
00:09:11.600 --> 00:09:14.500
 of the packet and understand how

170
00:09:14.500 --> 00:09:17.400
 it is structured. The packet pipes pane

171
00:09:17.400 --> 00:09:20.900
 is divided into the two sections as you

172
00:09:20.900 --> 00:09:20.900
 see

173
00:09:22.300 --> 00:09:23.500
the hexadecimal View

174
00:09:24.100 --> 00:09:25.400
and ask you

175
00:09:27.300 --> 00:09:30.400
the hexadecimal view shows the role date

176
00:09:30.400 --> 00:09:34.000
 of the packet as a series of hexadecimal values

177
00:09:33.800 --> 00:09:37.000
 while the ASCII will

178
00:09:36.300 --> 00:09:39.600
 shows the same data as ASCII characters.

179
00:09:41.100 --> 00:09:44.300
If I choose the internet part, it corresponds to

180
00:09:44.300 --> 00:09:47.900
 some bytes of the bytes Pane

181
00:09:47.900 --> 00:09:51.100
 and you can see it highlights as

182
00:09:50.100 --> 00:09:51.600
 blue.

183
00:09:52.600 --> 00:09:53.700
in the right side

184
00:09:54.700 --> 00:09:56.400
if I choose the another one.

185
00:09:57.300 --> 00:09:58.700
IP version 4

186
00:10:00.700 --> 00:10:04.100
and it corresponds to the other bytes of

187
00:10:03.100 --> 00:10:05.200
 the byte pain.

188
00:10:07.200 --> 00:10:09.900
And the last one of the bytes.

189
00:10:11.800 --> 00:10:12.800
TCP protocol part

190
00:10:14.800 --> 00:10:17.400
two people protocol part is corresponding to

191
00:10:17.400 --> 00:10:20.800
 the last part of the bytes.

192
00:10:20.800 --> 00:10:23.100
 Then you choose the frame part.

193
00:10:24.500 --> 00:10:27.400
It corresponds to the all of the bytes.

194
00:10:34.400 --> 00:10:37.600
And the status bar is located at the bottom

195
00:10:37.600 --> 00:10:40.800
 of the Wireshark window it displays information about

196
00:10:40.800 --> 00:10:43.600
 the current capture number of packets captured

197
00:10:43.600 --> 00:10:45.000
 is in here.

198
00:10:45.700 --> 00:10:48.400
We have now 43 packets

199
00:10:48.400 --> 00:10:51.500
 and how many of them are displaying now

200
00:10:51.500 --> 00:10:55.300
 if you apply a filter the displayed

201
00:10:54.300 --> 00:10:56.200
 number will change.

202
00:10:58.400 --> 00:11:01.700
So this is the total number of the packets and

203
00:11:01.700 --> 00:11:04.400
 how many of them are displayed in

204
00:11:04.400 --> 00:11:04.800
 here.

205
00:11:06.300 --> 00:11:09.700
So let's move on to the main toolbar is

206
00:11:09.700 --> 00:11:10.300
 in here.

207
00:11:11.600 --> 00:11:15.300
And it includes the starting capturing

208
00:11:14.300 --> 00:11:17.200
 packets or stopping it

209
00:11:17.200 --> 00:11:20.700
 and restart the capture current capture

210
00:11:20.700 --> 00:11:23.900
 and the capture options

211
00:11:23.900 --> 00:11:27.200
 is another tool and

212
00:11:26.200 --> 00:11:29.400
 this button resize back

213
00:11:29.400 --> 00:11:32.100
 list columns to fit contents.

214
00:11:33.100 --> 00:11:36.600
We can change the length of the columns like this.

215
00:11:38.800 --> 00:11:41.600
We can make some change about the

216
00:11:41.600 --> 00:11:42.100
 columns.

217
00:11:42.900 --> 00:11:44.000
columns length

218
00:11:47.300 --> 00:11:51.100
After these operations, you can you can

219
00:11:50.100 --> 00:11:54.200
 convert to the previous situation these

220
00:11:53.200 --> 00:11:56.400
 columns by using this

221
00:11:56.400 --> 00:11:59.000
 button resize packet list columns to

222
00:11:59.300 --> 00:12:02.900
 feed contents. It has turned to the previous

223
00:12:02.900 --> 00:12:03.500
 situation.

224
00:12:04.500 --> 00:12:06.400
the menu has some

225
00:12:07.400 --> 00:12:10.900
headers as you can see the file menu.

226
00:12:11.700 --> 00:12:14.500
Open the file open recent.

227
00:12:16.200 --> 00:12:17.300
previous files

228
00:12:18.400 --> 00:12:20.800
That you have opened before.

229
00:12:21.600 --> 00:12:25.000
And merge some pick some PK files

230
00:12:24.500 --> 00:12:27.400
 you can merge some PK files using

231
00:12:27.400 --> 00:12:28.100
 this option.

232
00:12:28.800 --> 00:12:31.600
and importing operation you

233
00:12:31.600 --> 00:12:34.900
 can use this and

234
00:12:35.900 --> 00:12:40.000
you can and you can import from hexthump.

235
00:12:41.400 --> 00:12:44.400
And to close the current file using this

236
00:12:44.400 --> 00:12:47.700
 button and the saving and saving

237
00:12:47.700 --> 00:12:50.200
 guests as you can you as you can know.

238
00:12:52.100 --> 00:12:53.800
And save as you know.

239
00:12:54.900 --> 00:12:56.800
and file set

240
00:13:01.200 --> 00:13:04.700
there's an export objects option. We will use later with

241
00:13:04.700 --> 00:13:04.800
 this.

242
00:13:07.300 --> 00:13:07.400
and

243
00:13:09.800 --> 00:13:12.900
when it comes to edit menu find

244
00:13:12.900 --> 00:13:13.800
 packets.

245
00:13:14.800 --> 00:13:17.100
the useful choice for us

246
00:13:17.900 --> 00:13:20.000
when you click the find packet.

247
00:13:22.200 --> 00:13:23.300
There is a field.

248
00:13:23.900 --> 00:13:25.200
To find the packet.

249
00:13:25.900 --> 00:13:26.100
but

250
00:13:27.100 --> 00:13:29.300
they will change this field first.

251
00:13:30.200 --> 00:13:32.700
We will change to string.

252
00:13:33.400 --> 00:13:37.000
Because I want to search a string on my

253
00:13:36.000 --> 00:13:37.500
 packets.

254
00:13:38.100 --> 00:13:42.400
I want to search for a packet which contains a

255
00:13:41.400 --> 00:13:42.900
 download?

256
00:13:46.800 --> 00:13:49.900
And hitting the enter it

257
00:13:49.900 --> 00:13:53.300
 is found the packet which contains download

258
00:13:52.300 --> 00:13:54.200
 string.

259
00:13:56.400 --> 00:13:58.800
Then I want to make it cancel.

260
00:14:02.200 --> 00:14:04.700
Now we are turning to the edit menu.

261
00:14:05.700 --> 00:14:08.100
And find next find previous.

262
00:14:09.300 --> 00:14:12.400
Are also being used to find

263
00:14:12.400 --> 00:14:15.700
 the packets and Mark packet is another

264
00:14:15.700 --> 00:14:18.900
 choice for us marking to

265
00:14:18.900 --> 00:14:22.100
 to Mark some packets that

266
00:14:21.100 --> 00:14:22.500
 we want.

267
00:14:23.900 --> 00:14:26.400
You can Mark some packets in

268
00:14:26.400 --> 00:14:26.600
 here.

269
00:14:30.700 --> 00:14:31.600
I am choosing.

270
00:14:32.400 --> 00:14:34.400
Randomly some of the packets.

271
00:14:35.100 --> 00:14:35.800
to mark

272
00:14:37.900 --> 00:14:38.600
as you can see

273
00:14:39.800 --> 00:14:43.200
and then you can use the menu option

274
00:14:42.200 --> 00:14:45.700
 or you can use the shortcuts. There

275
00:14:45.700 --> 00:14:47.000
 are plus n

276
00:14:47.900 --> 00:14:50.900
and I will do this with Ctrl

277
00:14:50.900 --> 00:14:51.100
 and

278
00:14:53.600 --> 00:14:53.800
so

279
00:14:58.100 --> 00:15:01.200
we have marked the packets that we have chosen.

280
00:15:02.600 --> 00:15:04.800
We can unmark these packets again.

281
00:15:08.300 --> 00:15:09.500
one by one or

282
00:15:10.900 --> 00:15:13.100
we can choose all of them.

283
00:15:15.500 --> 00:15:18.400
And I am choosing all of them now.

284
00:15:19.300 --> 00:15:19.700
again

285
00:15:22.100 --> 00:15:22.200
so

286
00:15:28.300 --> 00:15:32.900
unmarked shortcut is the Ctrl and alter

287
00:15:31.900 --> 00:15:34.800
 and M. I

288
00:15:34.800 --> 00:15:35.700
 will apply this.

289
00:15:40.800 --> 00:15:44.300
Under the edit menu, we can go to the preferences

290
00:15:43.300 --> 00:15:46.100
 menu preferences window.

291
00:15:47.100 --> 00:15:50.500
And the other one is layout. The layout is

292
00:15:50.500 --> 00:15:53.800
 used to arrange the Wireshark things. We

293
00:15:53.800 --> 00:15:57.100
 have three panes in our window and

294
00:15:56.100 --> 00:15:59.900
 we can arrange them in here. We are

295
00:15:59.900 --> 00:16:02.300
 using this style for our

296
00:16:02.300 --> 00:16:05.200
 paints and we can change to the other

297
00:16:05.200 --> 00:16:06.700
 type of the layout.

298
00:16:08.200 --> 00:16:09.700
I want to change to this.

299
00:16:11.600 --> 00:16:15.200
So the paints will be located in this

300
00:16:14.200 --> 00:16:17.100
 style. Number one will be

301
00:16:17.100 --> 00:16:19.100
 packed list and

302
00:16:20.100 --> 00:16:24.200
into will be packed details and the

303
00:16:23.200 --> 00:16:27.400
 below this pain packet

304
00:16:26.400 --> 00:16:30.200
 details pane number three Pain

305
00:16:29.200 --> 00:16:32.100
 Three will be packed parts.

306
00:16:33.100 --> 00:16:36.500
So you can arrange the pain situation in

307
00:16:36.500 --> 00:16:39.800
 here and if you click to

308
00:16:39.800 --> 00:16:40.300
 the ok.

309
00:16:42.500 --> 00:16:45.700
Our pains have been arranged to this style

310
00:16:45.700 --> 00:16:46.300
 now.

311
00:16:47.800 --> 00:16:48.300
and

312
00:16:50.100 --> 00:16:53.800
and I will turn it back to the previous mode.

313
00:16:55.600 --> 00:16:57.200
in the edit preferences

314
00:16:58.500 --> 00:17:01.700
and then choosing the

315
00:17:01.700 --> 00:17:04.500
 layout and I am converting it

316
00:17:04.500 --> 00:17:06.800
 back to the very smart.

317
00:17:08.800 --> 00:17:10.000
and the same

318
00:17:12.200 --> 00:17:15.100
and the same sequence on the previous mod.

319
00:17:18.300 --> 00:17:19.800
And I am saying okay.

320
00:17:21.800 --> 00:17:22.500
as you can see

321
00:17:23.600 --> 00:17:25.500
now the pains.

322
00:17:26.100 --> 00:17:28.800
Are located in the previous mode?

323
00:17:31.500 --> 00:17:34.600
Under The View menu, you can arrange also the

324
00:17:34.600 --> 00:17:38.000
 time display format you can arrange the

325
00:17:37.400 --> 00:17:39.900
 time information in here.

326
00:17:41.200 --> 00:17:44.800
Now by the default we can see the seconds information.

327
00:17:46.100 --> 00:17:47.100
on our packets

328
00:17:48.300 --> 00:17:48.800
as you can see

329
00:17:49.700 --> 00:17:52.900
just we are seeing the second

330
00:17:52.900 --> 00:17:54.500
 formation.

331
00:17:55.400 --> 00:17:56.200
one by one

332
00:17:57.700 --> 00:17:58.600
It's increasing.

333
00:18:00.700 --> 00:18:01.700
with the packets

334
00:18:02.900 --> 00:18:06.000
But we can change this format.

335
00:18:06.900 --> 00:18:07.800
to another one

336
00:18:09.000 --> 00:18:09.200
and

337
00:18:10.600 --> 00:18:11.000
now

338
00:18:12.300 --> 00:18:15.600
our format is the second since first capture

339
00:18:15.600 --> 00:18:16.200
 packet.

340
00:18:16.800 --> 00:18:18.800
And I want to convert it to.

341
00:18:20.800 --> 00:18:23.100
date and time of the day

342
00:18:25.400 --> 00:18:28.300
I will see the time information like this.

343
00:18:32.300 --> 00:18:36.100
So you can change again this time

344
00:18:35.100 --> 00:18:36.900
 format.

345
00:18:37.600 --> 00:18:38.400
into another

346
00:18:40.700 --> 00:18:42.200
for example, I want to

347
00:18:43.400 --> 00:18:45.500
see like this.

348
00:18:47.300 --> 00:18:50.800
I want to convert it to UTC date

349
00:18:50.800 --> 00:18:52.800
 and time of day format.

350
00:18:54.300 --> 00:18:54.900
if you do this

351
00:18:56.400 --> 00:18:58.100
You can see the change.

352
00:19:00.600 --> 00:19:01.400
and again

353
00:19:03.500 --> 00:19:05.700
Turn it back to the previous mode.

354
00:19:07.400 --> 00:19:08.200
Just seconds.

355
00:19:09.400 --> 00:19:11.800
second since first capture packet

356
00:19:15.100 --> 00:19:16.700
So it turns back in.

357
00:19:20.200 --> 00:19:24.600
Under view menu click to the result Network

358
00:19:23.600 --> 00:19:25.300
 addresses.

359
00:19:26.600 --> 00:19:29.600
Can see the IP addresses are disappeared.

360
00:19:30.400 --> 00:19:34.100
Because Wireshark will use a

361
00:19:33.100 --> 00:19:36.400
 name resolver to convert an IP

362
00:19:36.400 --> 00:19:38.900
 address to the hostname as related with it.

363
00:19:40.100 --> 00:19:43.600
So we are seeing now in here the domain names.

364
00:19:45.500 --> 00:19:48.200
Instead of the IP addresses some of them

365
00:19:48.200 --> 00:19:49.600
 at least.

366
00:19:50.400 --> 00:19:50.800
and

367
00:19:55.500 --> 00:19:58.900
again, we will turn back to the IP addresses information.

368
00:20:01.100 --> 00:20:05.600
Under The View menu, you can also use the coloring

369
00:20:04.600 --> 00:20:06.900
 rules option.

370
00:20:08.600 --> 00:20:11.900
And why shark allows you to create coloring rules

371
00:20:11.900 --> 00:20:15.100
 that highlight package based on specific crit

372
00:20:14.100 --> 00:20:17.900
 areas such as the protocol Source or

373
00:20:17.900 --> 00:20:20.800
 destination address or packet size.

374
00:20:20.800 --> 00:20:23.900
 This can help you identify patterns and

375
00:20:23.900 --> 00:20:26.300
 anomalies in the packet capture

376
00:20:26.300 --> 00:20:29.300
 to create a coloring rule click on

377
00:20:29.300 --> 00:20:32.700
 The View menu and select coloring rules

378
00:20:32.700 --> 00:20:34.800
 as you can see the window here.

379
00:20:35.900 --> 00:20:36.700
This will open.

380
00:20:37.600 --> 00:20:39.300
our rules editor

381
00:20:39.800 --> 00:20:43.100
So, this is our rows editor coloring

382
00:20:42.100 --> 00:20:45.200
 Rose editor where you

383
00:20:45.200 --> 00:20:48.800
 can create and edit your coloring rules to create

384
00:20:48.800 --> 00:20:49.700
 a new rule.

385
00:20:51.400 --> 00:20:54.800
Click on the new button and specify the

386
00:20:54.800 --> 00:20:57.000
 criteria for the rule so we can

387
00:20:57.200 --> 00:21:00.700
 see the packets which are associated with the UDP

388
00:21:00.700 --> 00:21:02.900
 filtering course and to do this.

389
00:21:05.700 --> 00:21:07.800
You can write your filter codes.

390
00:21:08.700 --> 00:21:12.900
Into the filter field or directly.

391
00:21:11.900 --> 00:21:14.200
 You can click to the

392
00:21:14.200 --> 00:21:17.900
 button of apply s filters you

393
00:21:17.900 --> 00:21:19.600
 click the applies filter.

394
00:21:22.300 --> 00:21:23.900
UDP filter will be applied.

395
00:21:25.600 --> 00:21:28.300
And I will click to the

396
00:21:28.300 --> 00:21:29.800
 apply as filters.

397
00:21:30.900 --> 00:21:34.200
So as you can see, the UDP

398
00:21:33.200 --> 00:21:36.300
 filtering has been applied.

399
00:21:38.500 --> 00:21:41.200
And we can see the UDP packets only.

400
00:21:42.300 --> 00:21:44.200
in our packet list pane

401
00:21:46.100 --> 00:21:50.000
and the color is the same in our coloring rules

402
00:21:49.000 --> 00:21:50.900
 paint.

403
00:21:51.700 --> 00:21:53.100
a UDP color

404
00:21:54.500 --> 00:21:57.700
Even if you don't apply this filters, the

405
00:21:57.700 --> 00:22:00.000
 coloring rules here are applied in the

406
00:22:00.600 --> 00:22:03.200
 packet this window in the whole pack of this

407
00:22:03.200 --> 00:22:07.100
 window. For example, if there's a TCP rst packet

408
00:22:06.100 --> 00:22:09.200
 in packets in our

409
00:22:09.200 --> 00:22:12.700
 packets, you will see the color of this packet as red

410
00:22:12.700 --> 00:22:15.200
 in the packet list pane.

411
00:22:16.100 --> 00:22:19.100
Now we can close the coloring screws window.

412
00:22:21.800 --> 00:22:23.300
I will click the cancel.

413
00:22:25.300 --> 00:22:25.400
and

414
00:22:26.700 --> 00:22:29.700
I will cancel the filtering field chords.

415
00:22:30.700 --> 00:22:33.700
Under the analyze menu the other option.

416
00:22:33.700 --> 00:22:36.700
 The other important option is the follow.

417
00:22:37.300 --> 00:22:41.400
And follow is used to see some

418
00:22:40.400 --> 00:22:44.800
 streams on our packets. For

419
00:22:43.800 --> 00:22:46.600
 example, we can see in here

420
00:22:46.600 --> 00:22:50.100
 to TCP stream and if

421
00:22:49.100 --> 00:22:52.000
 I click to the TCP sitting

422
00:22:53.400 --> 00:22:54.500
as you can see

423
00:22:55.400 --> 00:22:58.900
our Network traffic based on the TCP.

424
00:23:00.000 --> 00:23:00.300
now

425
00:23:02.100 --> 00:23:04.400
Is streaming like this?

426
00:23:06.200 --> 00:23:08.300
So we can see the terrific.

427
00:23:09.400 --> 00:23:10.900
We can see the packets.

428
00:23:13.100 --> 00:23:14.300
As a string.

429
00:23:15.400 --> 00:23:16.200
in this window

430
00:23:20.600 --> 00:23:21.700
and this is okay.

431
00:23:23.200 --> 00:23:24.800
Now we can close it.

432
00:23:28.700 --> 00:23:31.100
By the way, you can add some comments to the

433
00:23:31.100 --> 00:23:33.700
 packets that you want and

434
00:23:34.700 --> 00:23:37.200
To add comment to

435
00:23:37.200 --> 00:23:40.600
 the packet you can use packet comments

436
00:23:40.600 --> 00:23:42.100
 add new comment.

437
00:23:42.600 --> 00:23:42.900
and

438
00:23:44.400 --> 00:23:47.800
and you can write your comments about this packet to

439
00:23:47.800 --> 00:23:48.700
 the this field.

440
00:24:05.300 --> 00:24:08.400
So then if you click the ok.

441
00:24:10.800 --> 00:24:13.300
After adding the packed comment, you can

442
00:24:13.300 --> 00:24:16.300
 see the comments in the packet detail

443
00:24:16.300 --> 00:24:16.800
 pane.

444
00:24:19.100 --> 00:24:21.600
Or you can make double click.

445
00:24:22.400 --> 00:24:24.500
And you can see in here also.

446
00:24:25.600 --> 00:24:27.900
This is a packet command example.

447
00:24:29.200 --> 00:24:30.600
That I have written.

448
00:24:36.100 --> 00:24:39.500
So you can add some comments like this

449
00:24:39.500 --> 00:24:42.300
 for particular packets that will help the

450
00:24:42.300 --> 00:24:43.300
 further investigation.

451
00:24:44.300 --> 00:24:49.000
Or point out importance or some suspicious

452
00:24:47.400 --> 00:24:51.400
 points for other.

453
00:24:52.200 --> 00:24:55.400
Analysts unlike packet marking to

454
00:24:55.400 --> 00:24:58.000
 comments can stay within the capture file.

455
00:24:58.900 --> 00:25:02.200
And until the operator remove

456
00:25:01.200 --> 00:25:02.600
 them.

457
00:25:03.700 --> 00:25:07.000
So they are stable for us for

458
00:25:06.100 --> 00:25:09.200
 an analyst. It is crucial to know how to

459
00:25:09.200 --> 00:25:11.300
 utilize this statically information.

460
00:25:12.700 --> 00:25:15.400
And it provides a quick summary of

461
00:25:15.400 --> 00:25:18.300
 the process pcap and which will

462
00:25:18.300 --> 00:25:22.000
 help another create a hypothesis or an

463
00:25:21.000 --> 00:25:22.600
 investigation.

464
00:25:23.800 --> 00:25:26.200
You can use the statistics menu to do

465
00:25:26.200 --> 00:25:26.600
 this.

466
00:25:27.300 --> 00:25:30.100
And under this menu, we will

467
00:25:30.100 --> 00:25:32.900
 first look at the result addresses.

468
00:25:37.600 --> 00:25:40.700
So in this window, we will check the

469
00:25:41.500 --> 00:25:42.200
hosts

470
00:25:43.400 --> 00:25:46.600
this option helps analysts specify the

471
00:25:46.600 --> 00:25:49.400
 IP addresses and DNS names

472
00:25:49.400 --> 00:25:52.500
 available in the capturing file by

473
00:25:52.500 --> 00:25:56.100
 providing the list of the result addresses and

474
00:25:55.100 --> 00:25:57.600
 their host names.

475
00:25:58.400 --> 00:26:01.100
As you can see the IP addresses.

476
00:26:02.100 --> 00:26:05.400
In the address column and the host names

477
00:26:05.400 --> 00:26:07.900
 under the name column.

478
00:26:08.900 --> 00:26:12.600
So analyst can quickly identify

479
00:26:11.600 --> 00:26:14.200
 the access to Resource by

480
00:26:14.200 --> 00:26:15.500
 using this menu.

481
00:26:16.900 --> 00:26:19.200
Thus they can support they can

482
00:26:19.200 --> 00:26:23.300
 highlight access resource and evaluate them

483
00:26:23.300 --> 00:26:25.100
 according to the event of Interest.

484
00:26:27.500 --> 00:26:29.800
and you can view the ports to

485
00:26:31.300 --> 00:26:31.500
in here

486
00:26:33.300 --> 00:26:35.900
and capture file comments

487
00:26:36.700 --> 00:26:37.000
Maybe

488
00:26:39.200 --> 00:26:41.500
so that's all about the result address.

489
00:26:45.800 --> 00:26:48.500
And again under the statistics menu.

490
00:26:49.700 --> 00:26:52.800
We have an option protocol hierarchy.

491
00:26:56.100 --> 00:26:57.200
and this option

492
00:26:58.300 --> 00:27:01.800
split down all available protocols from

493
00:27:01.800 --> 00:27:05.000
 the capturing file and these apps

494
00:27:04.900 --> 00:27:08.000
 analysts leave the protocols in

495
00:27:07.500 --> 00:27:09.200
 a tree structure.

496
00:27:10.300 --> 00:27:13.700
view based on packet counters and

497
00:27:13.700 --> 00:27:14.900
 percentages

498
00:27:17.500 --> 00:27:18.400
as you can see

499
00:27:19.300 --> 00:27:22.700
And thus analyst can

500
00:27:22.700 --> 00:27:25.700
 view the overall usage of the ports and

501
00:27:25.700 --> 00:27:28.400
 services and focus on the event

502
00:27:28.400 --> 00:27:29.200
 of Interest.

503
00:27:30.400 --> 00:27:35.000
And we will look at the other option the conversations

504
00:27:33.000 --> 00:27:35.900
 options.

505
00:27:38.700 --> 00:27:41.900
The conversation represents terrific

506
00:27:41.900 --> 00:27:44.600
 between two specific and points. For

507
00:27:44.600 --> 00:27:48.200
 example, if you look at the IP version 4 column

508
00:27:49.600 --> 00:27:49.900
our section

509
00:27:50.900 --> 00:27:52.500
you can see in here.

510
00:27:53.600 --> 00:27:55.800
two different IP addresses

511
00:27:58.400 --> 00:28:01.200
is one of the other spa and the other

512
00:28:01.200 --> 00:28:03.200
 one is the other SB.

513
00:28:03.900 --> 00:28:06.500
So there is a conversation between

514
00:28:06.500 --> 00:28:10.000
 these IP addresses and the

515
00:28:09.800 --> 00:28:11.100
 packets count.

516
00:28:12.500 --> 00:28:13.700
packet bytes

517
00:28:14.300 --> 00:28:16.500
packet by its length or size

518
00:28:17.200 --> 00:28:22.600
totally and the conversation aspect

519
00:28:20.600 --> 00:28:23.700
 the conversation

520
00:28:23.700 --> 00:28:27.000
 Direction packets from A

521
00:28:26.500 --> 00:28:27.600
 to B.

522
00:28:28.900 --> 00:28:31.400
And packets from A to

523
00:28:31.400 --> 00:28:32.500
 B as bytes.

524
00:28:33.100 --> 00:28:35.300
and as bytes packet

525
00:28:36.300 --> 00:28:37.400
from B to a

526
00:28:39.300 --> 00:28:42.400
Etc and there's also a duration information.

527
00:28:44.500 --> 00:28:46.700
in here and bits

528
00:28:48.300 --> 00:28:51.600
you can see some specific information about

529
00:28:51.600 --> 00:28:52.400
 the conversation.

530
00:28:54.300 --> 00:28:56.500
You can also investigate the TCP.

531
00:28:57.400 --> 00:29:00.900
information under the TCP column

532
00:29:01.500 --> 00:29:03.000
in the TCP segment

533
00:29:03.700 --> 00:29:05.200
and the UDP also

534
00:29:07.200 --> 00:29:07.800
You can see.

535
00:29:12.300 --> 00:29:15.100
Now, let's look at the other statistics option.

536
00:29:16.500 --> 00:29:17.700
And close this.

537
00:29:19.300 --> 00:29:22.500
The other one is the end points option.

538
00:29:23.900 --> 00:29:25.500
So what we have in here?

539
00:29:27.500 --> 00:29:30.700
The end points option is similar to

540
00:29:30.700 --> 00:29:32.900
 the conversations option.

541
00:29:33.600 --> 00:29:36.500
And the only difference is that

542
00:29:36.500 --> 00:29:39.200
 this option provides unique information.

543
00:29:40.300 --> 00:29:43.400
unique information for a single information field

544
00:29:44.500 --> 00:29:47.900
such as ethernet IP version

545
00:29:47.900 --> 00:29:51.100
 4 IP version 6 TCP for

546
00:29:50.700 --> 00:29:52.000
 UDP

547
00:29:53.200 --> 00:29:56.500
Does under this can identify the

548
00:29:56.500 --> 00:29:57.900
 unique and points?

549
00:29:58.800 --> 00:30:01.400
The Unicorn endpoints in the capturing

550
00:30:01.400 --> 00:30:04.900
 file and use it for the event of interest you can

551
00:30:04.900 --> 00:30:07.000
 use this option.

552
00:30:08.100 --> 00:30:09.500
to do make some

553
00:30:10.200 --> 00:30:11.100
analysis

554
00:30:16.900 --> 00:30:19.100
again under the statistics menu

555
00:30:19.900 --> 00:30:22.300
We can see the I/O graphs.

556
00:30:24.200 --> 00:30:25.300
As you can see here.

557
00:30:29.800 --> 00:30:32.900
In version the iograph feature allows

558
00:30:32.900 --> 00:30:35.400
 you to visualize the traffic on a network

559
00:30:35.400 --> 00:30:36.400
 over time.

560
00:30:37.800 --> 00:30:40.700
It can help you understand how traffic patterns

561
00:30:40.700 --> 00:30:41.600
 are changing.

562
00:30:43.400 --> 00:30:43.600
and

563
00:30:45.200 --> 00:30:48.700
Identify any potential issues or trends

564
00:30:48.700 --> 00:30:51.800
 for example in here? There's some

565
00:30:51.800 --> 00:30:52.800
 TCP errors.

566
00:30:53.800 --> 00:30:54.100
and

567
00:30:55.700 --> 00:30:58.700
The iograph is displayed in a

568
00:30:58.700 --> 00:31:01.900
 separate window like this and consists of

569
00:31:01.900 --> 00:31:04.400
 a graph with two axes.

570
00:31:05.800 --> 00:31:08.900
The first one is about the packets and

571
00:31:08.900 --> 00:31:11.700
 the second one is interested in

572
00:31:11.700 --> 00:31:12.600
 time.

573
00:31:13.500 --> 00:31:16.500
You can customize the eye of biograph by

574
00:31:16.500 --> 00:31:19.300
 selecting the specific draft types.

575
00:31:19.300 --> 00:31:23.100
 You want to include and by adjusting the

576
00:31:22.100 --> 00:31:25.300
 time range of the data being displayed.

577
00:31:26.600 --> 00:31:29.400
And there you graph can be a useful tool for

578
00:31:29.400 --> 00:31:32.400
 understanding the traffic on the network over time and

579
00:31:32.400 --> 00:31:35.900
 identifying any chance or patterns it can

580
00:31:35.900 --> 00:31:38.500
 also have you troubleshoot issues such

581
00:31:38.500 --> 00:31:40.000
 as sudden spikes.

582
00:31:41.500 --> 00:31:42.700
As you saw here.

583
00:31:43.900 --> 00:31:46.900
and it can also help you troubleshoot

584
00:31:46.900 --> 00:31:47.700
 issues such as

585
00:31:50.600 --> 00:31:53.600
sudden spikes or sudden drops

586
00:31:54.900 --> 00:31:55.900
again, there's a

587
00:31:57.800 --> 00:31:59.900
and other Spike and drop

588
00:32:01.900 --> 00:32:04.700
and it can also help you travel should.

589
00:32:05.400 --> 00:32:09.000
in band feet utilization

590
00:32:15.300 --> 00:32:17.800
now we can pass to the other option.

591
00:32:18.600 --> 00:32:21.600
The other option is the photograph another

592
00:32:21.600 --> 00:32:22.800
 graph option.

593
00:32:23.800 --> 00:32:23.900
and

594
00:32:25.300 --> 00:32:26.500
inverse shark

595
00:32:28.600 --> 00:32:32.500
The photograph feature allows you to again visualize

596
00:32:31.500 --> 00:32:35.400
 the flow of network traffic between

597
00:32:34.400 --> 00:32:38.100
 two or more devices. For

598
00:32:37.100 --> 00:32:40.800
 example, there are two more two devices.

599
00:32:42.100 --> 00:32:45.900
And the other one to third device and

600
00:32:45.900 --> 00:32:49.100
 support device. So totally we

601
00:32:48.100 --> 00:32:51.200
 have the four devices in here.

602
00:32:51.900 --> 00:32:54.900
and their IP addresses

603
00:32:54.900 --> 00:32:56.100
 you can see

604
00:32:58.200 --> 00:33:01.600
so it can help you understand how the traffic is moving between

605
00:33:01.600 --> 00:33:03.100
 devices and

606
00:33:04.200 --> 00:33:07.400
Identify any potential bottlenecks or

607
00:33:07.400 --> 00:33:09.300
 issues you can see in here.

608
00:33:11.400 --> 00:33:12.300
as a picture

609
00:33:14.100 --> 00:33:17.800
the photograph is displayed like in

610
00:33:17.800 --> 00:33:19.500
 a separate window.

611
00:33:20.400 --> 00:33:20.800
and

612
00:33:22.100 --> 00:33:26.000
consists of a series of notes and edit edges

613
00:33:27.500 --> 00:33:30.200
and consists of a series of notes.

614
00:33:31.100 --> 00:33:33.300
each node represents a device

615
00:33:34.200 --> 00:33:37.900
as you can see each node represents a device.

616
00:33:39.600 --> 00:33:39.800
so

617
00:33:41.500 --> 00:33:44.200
or a network component and the edges between

618
00:33:44.200 --> 00:33:45.100
 nodes.

619
00:33:45.800 --> 00:33:48.600
The edges between notes as

620
00:33:48.600 --> 00:33:49.100
 you can see.

621
00:33:52.700 --> 00:33:54.300
there are signs or

622
00:33:55.200 --> 00:33:56.700
the aeroscience and

623
00:33:58.500 --> 00:34:01.600
the edges between nodes represent the flow

624
00:34:02.800 --> 00:34:05.100
represent the flow of traffic between them

625
00:34:06.300 --> 00:34:08.500
you can customize also the

626
00:34:10.400 --> 00:34:13.700
bar graph as well by selecting the

627
00:34:13.700 --> 00:34:14.300
 specific devices

628
00:34:15.500 --> 00:34:19.000
Theolograph can be a useful tool for understanding

629
00:34:18.800 --> 00:34:22.700
 especially on the terrible

630
00:34:21.700 --> 00:34:25.200
 shooting and the understanding the

631
00:34:25.200 --> 00:34:29.500
 flow of traffic in a network and identifying any

632
00:34:29.500 --> 00:34:31.700
 potential issues or bottlenecks.

633
00:34:32.700 --> 00:34:33.600
as in here

634
00:34:34.700 --> 00:34:35.300
You can see.

635
00:34:38.900 --> 00:34:41.400
There are some tcps you can

636
00:34:41.400 --> 00:34:42.300
 see in here.

637
00:34:44.400 --> 00:34:44.600
so

638
00:34:45.900 --> 00:34:47.400
that is the flow graph.

639
00:34:48.200 --> 00:34:49.600
And we can close now.

640
00:34:58.100 --> 00:35:01.700
So why sharks graphical use interface provides a

641
00:35:01.700 --> 00:35:04.600
 range of features that make it easy to navigate and

642
00:35:04.600 --> 00:35:07.300
 analyze packets even for people who

643
00:35:07.300 --> 00:35:09.200
 are new to pack it analysis.

644
00:35:09.900 --> 00:35:12.700
It is designed to be intuitive and

645
00:35:12.700 --> 00:35:15.400
 user-friendly with a range

646
00:35:15.400 --> 00:35:18.200
 of customization options that allow you

647
00:35:18.200 --> 00:35:21.800
 to tailor the entire face to your specific

648
00:35:21.800 --> 00:35:22.200
 needs.
