WEBVTT - This file was automatically generated by VIMEO

0
00:00:07.600 --> 00:00:10.700
Hello everyone. Welcome back to the RFID NFC section.

1
00:00:10.700 --> 00:00:13.700
 And this is video. Number two point three where

2
00:00:13.700 --> 00:00:17.300
 we're going to discuss about what Hardware components

3
00:00:16.300 --> 00:00:20.600
 we need for upcoming project. So

4
00:00:19.600 --> 00:00:23.000
 let's get started with that. And in

5
00:00:22.200 --> 00:00:25.300
 the video you are watching a lot of components there.

6
00:00:25.300 --> 00:00:29.500
 So firstly I will start with the pn532 module.

7
00:00:28.500 --> 00:00:31.900
 This is the PN 532 module

8
00:00:31.900 --> 00:00:34.800
 to read the data from the RFID

9
00:00:34.800 --> 00:00:37.100
 and the NFC tags. These are the

10
00:00:37.100 --> 00:00:40.500
 tags. It's a keychain tag, and it's a car tag

11
00:00:40.500 --> 00:00:43.500
 and this is the most D1 mini.

12
00:00:43.500 --> 00:00:46.300
 Actually I talk about in the last video that I'm going

13
00:00:46.300 --> 00:00:47.200
 to use that.

14
00:00:48.500 --> 00:00:51.000
Board because it's a very small as compared to the

15
00:00:51.000 --> 00:00:52.400
 esp32.

16
00:00:53.100 --> 00:00:56.300
In the first video we are going to cover how to read the tag

17
00:00:56.300 --> 00:00:59.900
 by using that device and that module. Okay,

18
00:00:59.900 --> 00:01:02.800
 and this is the lock which

19
00:01:02.800 --> 00:01:05.800
 operates on the 12 volt and this is the relay and

20
00:01:05.800 --> 00:01:09.000
 this is the charger and this is for the second project

21
00:01:08.400 --> 00:01:11.300
 where we will on and off that

22
00:01:11.300 --> 00:01:14.600
 lock by authorizing that card

23
00:01:14.600 --> 00:01:17.400
 and these are the jumper wires that we're

24
00:01:17.400 --> 00:01:20.800
 going to use the connect all of this stuff. And right

25
00:01:20.800 --> 00:01:23.500
 now I don't have a space to show you breadboard, but

26
00:01:23.500 --> 00:01:26.200
 you can consider that we need a breadboard for that.

27
00:01:27.300 --> 00:01:30.800
And we will use that charger 12 volt

28
00:01:30.800 --> 00:01:33.400
 to relay where this actually it

29
00:01:33.400 --> 00:01:36.600
 works. Like when we use the authorized card.

30
00:01:36.600 --> 00:01:39.100
 We must even many sends the command to

31
00:01:39.100 --> 00:01:42.400
 that relay that you need to open up the current and the

32
00:01:42.400 --> 00:01:45.400
 12 volt Supply then link with that will lock and

33
00:01:45.400 --> 00:01:48.600
 it will open up the lock. So there's a

34
00:01:48.600 --> 00:01:48.800
 procedure.

35
00:01:49.700 --> 00:01:51.900
So guys see you in the next video where we're going to

36
00:01:52.900 --> 00:01:55.300
read the tag. So see you

37
00:01:55.300 --> 00:01:56.900
 in the next video. Have a good day, bye-bye.
